Drawer Tenders

Details: Description:- Rcc M-35 Grade As Per Rly's Approved Drawing And Specification For Construction Of bridge Sub Structure / Super Structure / Rcc Jacketing Of Arch, Pier, Abutment Etc. The Rate Includes design Of Concrete Mix Manufacture Of Concrete By Batching Plant, Cost Of Form Work Includes erection And De-shuttering, Placement Of Concrete Using Concrete Pump / Placing Boom, Compaction steel Reinforcement Cutting , Bending And Binding Of Reinforcement With Binding Wires And Placing In proper Position , Curing Of Concrete Upto Specified Period Complete In All Respect Including All Lead, lift, Crossing Road/track Etc. The Rate Also Includes Cost Of All Ingredients Of Rcc In/c Cement, Sand, aggregate, Admixture, Labour, Tools And Plants Etc. But Excluding The Cost Of Reinforcement. The contractor Has To Construct The Approach Road To The Site At His Own Cost, If Required, No Extra payment Will Be Made For This.

Details: Description :set Of Ermeto Fittings For Plumbing Of Lhb Buffet Coaches., As Per Drawing: M plefbuplubfur Version 3, Packing Instruction: Set Of Ermeto Fittings:- Each Item Of The Set S hould Be Packed Individually After Covering The Threaded Portion With Suitable Cap To prevent Thread Damange In Bio-degradeable Polythene Packet Invariably Clearly mentioned The Part No. Of The Item On It. All The Items Of Set Then Collectivelly Packed I n Card Board Box Of Sufficent Strength, Further Tied With Suitable No. Of Nylon Strips. a Well Protected List Should Be Pasted On Each Box Bearing Purchase Order No, Pl No., description, Drg./spec./part No., Qty., Firm's Name & Address, Date Of Despatch Etc. The T ransit Damange If Any Shall Be At The Cost Of Supplier. [ Warranty Period: 30 Months After T he Date Of Delivery ] ]

Details: Description :set Of Purge-o-mat Automatic Float Air Vent Valve And Vacuum Valve For Roof Water Tank 30l Mounting For lhb Coaches. 1) Purg-o-mat Automatic Float Air Vent Valve With Shut-off Valve Having Thread Bsp 3/8 Inch To Rcf Drg. No. lw63150, Item-4, Alt-e, Qty/set: 1no. 2) Vacuum Valve G-1/2 Inch To Rcf Drg. No. Lw63150, Item-3, Alt.e, Qty/set: 2 Nos. Note:(1) as Per Drawing Air Vent Valve And Shut-off-valve Must Be Procured From M/s Hans H. Voss Tulpenweg Or M/s Calefi Or M/s watts Industries Italy. (2) One Advance Sample To Be Got Approved By The Consignee For Functional Requirements Before bulk Supply. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Description:- Design Of Ballastless Track Using Contractor's Own Fastening System For Axle Loads And speeds As Specified In The Technical Requirements & Technicalspecifications, Including Submission Of design Criteria, Calculations, Designmethodology,detailed Design, Detailed Drawings, Construction methodology, Qap, Maintenance Manuals, Damage Rectification Methodology, Including All Its Various components As Per Various Input Parameter And Characteristics Of Various Component Of Fastening system, Etc As A Complete Job And As Directed By Engineer In Charge. The Design Will Be Property Of railway To Be Used In The Entire Rewa To Sidhi And Satna-panna Section For New Bg Rail Line Project.(a) for Track In Straight And Curves In Tunnels & Over Bridges Including Transition At Approaches.(b) For switch Expansion Joints (sej) Including Transition Portion If Any.(c) For Track In Straight And Curves On formations (cutting/filing) Including Transition Portion.(d) For Point And Crossings (1:8.5, 1:12 & 1:16) including Transition Portion If Any. (per Unit = Open Job (ls))

Description: Cut Up Scrap Of Condemned Overaged Wagons No.1)85079460344 Ser Bvzc Air Brake2)30038961653 Nr Bcnm1 Air Brake3)30058961497 Nfr Bcnm1 Air Brake4) 30078962030 Ser Bcnm1 Air Brake5) 30028965647 Er Bcnm1 Air Brake6)30098962188 Scr Bcnm1 Air Brake7)30058966478 Nfr Bcnm1 Air Brake8)30098961242 Scr Bcnm1 Air Brake9)30028965968 Er Bcnm1 Air Brake10)10079464498 Ser Boxnm1 Air Brake11)30038802796 Nr Bcnm1 Air Brake12)30018714156 Cr Bcnm1 Air Brake13)30078964003 Ser Bcnm1 Air Brake14)30018765530 Cr Bcnm1 Air Brake15)30018962922 Cr Bcnm1 Air Brake16)30018963141 Cr Bcnm1 Air Brake17)30028961427 Er Bcnm1 Air Brake18)30018962441 Cr Bcnm1 Air Brake19)30058961206 Nfr Bcnam1 Air Brake20)30078962160 Ser Bcnm1 Air Brakeitems To Be Reclaimed In Sr. No. 1 To Sr. No.20 (1) 01 Wheel Set=02 Wheel With 01 Axle & 02 Axle Bearing Comp=04 Nos ( Sr.no.1=02 Nos) (2) As Per Drawing No-sk 69595,sk-69594,sk-69592,sk-77578,sk-78527,wd-83069-s/1,wd-95005/s-1) 01 Complete Casnub Bogie Assembly With Available Fitting{( 02 Side Frame, 01 Bolster, 01 Spring Plank ,02 Complete Break Beam (1 Bogie Brake Push Rod, 2 Equilising Lever, 4 Bk/bl),04 Adapter, 04 Em Pad, Helical Spring (outer-14, Inner-10, Snubber-04) Etc)}]= 2 Nos (except, Sr.no.2, Sr.no.8, Sr.no.13, Sr.no.15, Sr.no.19, Sr.no.20 And Sr No.01 Without Bogie,) (3).cbc Assembly = 2 Nos (4) Draft Gear Yoke Assembly=2 Nos. (5) D.v. With Common Pipe Bracket= 01 No.(6) Bk Cylinder= 1 Nosnote- All Reclaimed Items To Be Returned By Purchaser To Railway In Safe And Sound Condition.note (1)delivery Given At Wagon Cutting Yard At North Gate,32 Quarter Dahod/ Wagon Cutting Side At Iow Sliding/rgm Sliding, Iow, Dahod (2) Custodian- Sse Inspection (r) Dahod (3)location Dahod Workshop 4)gst-18% 5)cutting Allowed For Easy Loading. Fdp 50 Daysnote(6)-wagon Cutting And Loading To Be Carefully Done By Purchaser And No Littering To Be Done By Concerned Labour Of Purchaser At Cutting Location.

Details: Provn Of External Services At Certain Places At Af Stn Nagpur (ph-i)- Construction Of Block Of Pump House Complete All As Specified And As Shown In Drawings, M&l For Laying And Compacting 250 Mm Thick (compacted Thickness) Granular Sub Base Course (gsb) Grading As Per Grade Ii As Specified Table 400-1 Of Marth Specifications For Road And Bridge Works, 2013, In Two Layers Of Each 125mm Over Compacted Subgrade With Natural Sand, Crushed Gravel, Crushed Stone, Crushed Slag Or Combination Thereof As Per The Grading Required The Materials Are Mechanically Mixed, Spread And Leveling On The Subgrade By Using Motor Grader Of Adequate Capacity, And Rolling With Vibratory Roller Of Capacity 80-100 Kn Static Weight For Achieving Required Compaction Density Of Atleast 98% Of The Maximum Dry Density. Consolidating To Required Gradient And Camber Complete All As Specified And Directed With Finished Surface Tolerances As Per Table 900-1 Of Morth Specifications For Road And Bridge Works, 2013. Complete All As Specified & Directed.

Details: Description:- Modification/alteration In Existing Ansaloda Make Ei (electronic Interlocking) As Per latest Rdso Guidelines/tan. It Includes: Design And Modification In Existing Interface And Interlocking circuits And Logic Of Ei System Including Modification In The Vdu (video Display Unit)/ Lcp (local control Panel)/ Ccip (control Cum Indication Panel), Maintenance Terminal (mpc), Data Logger, Relay rack Wiring. The Complete Work Should Comply With The Latest Rdso Specifications And Guidelines And as Per Approved Sip And Circuit Diagrams. All The Material (interface Cards/relays/wiring Material/ connectors/fuses /communication Devices Etc.) Shall Be Provided By The Contractor. The Work Also includes The Supply Of Modified Selection Table, Interface Circuits, Vdu/lcp/ccip Diagram Etc. To Suit the Modified Sip. It Also Includes The Carrying Out Of Fat, Sat Or Two Rounds Fat (as Applicable) Jointly with Railways And Satisfactory Commissioning. All Plans/drawings/circuits Etc. Should Be Prepared On autocad, Softcopy To Be Supplied In Pen Drive And 06 Sets Of Hard Copies Also To Be Supplied(as Per condition In Tender Docuemnts)

Details: Description:- Modification/alterationinexistingei(electronicinterlocking)asperlatestrdso guidelines/tan. It Includes: Design And Modify Cation In Existinginterface And Interlocking Circuits And logic Of Ei System Including Modification Inthe Vdu(video Display Unit)/ Lcp(local Control Panel)/ Ccip (control Cumindication Panel), Maintenance Terminal (mpc), Data Logger, Relay Rack Wiring. The complete Work Should Comply With The Latest Rdso Specifications And Guidelinesand As Per Approved sip And Circuit Diagrams. All The Material (interface Cards /relays / Wiring Material / Connectors / Fuses / Communication Devices Etc.) Shall Beprovided By The Contractor. Th E Work Also Includes The Supply of Modifiedselection Table, Interface Circuits, Vdu/lcp/ccip Diagram Etc. To Suit The Modifiedsip. It alsoincludesthecarryingoutoffat,sat(asapplicable)jointlywithrailwaysandsatisfactory commissioning.provisionofautoresetofaxlecountershouldbeonvdu(softreset).all plans/drawings/circuits Etc. Should Be Preparedon Auto Cad, Soft Copy To Be Supplied On Pen Drive and 06 Sets Of Hard Copiesalso To Be Supplied. Alteration Involving Modification From 11 Up To 20 routes.(peralteration=station)inspectionby:-rdsoforrdsoitems,otherthanrdsoitems. inspection By Consignee.

Details: Description:- Modification/alteration In Existing Medha Make Ei (electronic Interlocking) As Per Latest rdso Guidelines/tan. It Includes: Design And Modification In Existing Interface And Interlocking circuits And Logic Of Ei System Including Modification In The Vdu (video Display Unit)/ Lcp (local control Panel)/ Ccip (control Cum Indication Panel), Maintenance Terminal (mpc), Data Logger, Relay rack Wiring. The Complete Work Should Comply With The Latest Rdso Specifications And Guidelines And as Per Approved Sip And Circuit Diagrams. All The Material (interface Cards/relays/wiring Material/ connectors/fuses /communication Devices Etc.) Shall Be Provided By The Contractor. The Work Also includes The Supply Of Modified Selection Table, Interface Circuits, Vdu/lcp/ccip Diagram Etc. To Suit the Modified Sip. It Also Includes The Carrying Out Of Fat, Sat Or Two Rounds Fat (as Applicable) Jointly with Railways And Satisfactory Commissioning. All Plans/drawings/circuits Etc. Should Be Prepared On autocad, Softcopy To Be Supplied In Pen Drive And 06 Sets Of Hard Copies Also To Be Supplied(as Per condition In Tender Docuemnts)

Details: Description:- Modification/alteration I N Existing E I (electronicinterlocking) A S P E R Latest Rdso guidelines/tan. It Includes: Design And Modification In Existing Interface And Interlocking Circuits And logic Of Ei System Including Modification In The Vdu(video Display Unit)/ Lcp(local Control Panel)/ Ccip (control Cum Indication Panel),maintenance Terminal (mpc), Data Logger, Relay Rack Wiring. The complete Work Should Comply With The Latest Rdso Specifications And Guidelines And As Per Approved sip And Circuit Diagrams. All The Material (interface Cards / Relays / Wiring Material / Connectors / Fuses / Communication Devices Etc.) Shall Be Provided By The Contractor. The Work Also Includes The Supply O modified Selection Table, Interface Circuits, Vdu/ Lcp/ccip Diagram Etc. To Suit The Modified Sip. It Also includesthecarrying O U T Of Fat , S A T ( A S Applicable) Jointly Withrailways A N D Satisfactory commissioning. All Plans/drawings/circuits Etc. Should Be Prepared On Auto Cad, Soft Copy To Be supplied On Pen Drive And 06 Sets Of Hard Copies Also To Be Supplied.