Drawer Tenders

Details: Description :intermediate Tube And Air Pipe Coupling Items For Schaku Coupler As Per Icf/ md/spec.207, Issue Status-01, Rev.00, With Amendment No.1 & 2. Scope Of Supply Shall Be As per Clause 2.0 (2a & 3a) Of Part-a Of Icf/md/spec.207, Issue Status-01, Rev.00, With Amendme nt No.1 & 2. Air Coupling Connection Shall Withstand Working Pressure And Testing Pres sure Of 10.5 Kg/cm2 And 20 Kg/cm2 Respectively. Special Condition : Tenderer To Submit Rdso approved Drawings At The Time Of Quoting The Tender. [ Warranty Period: 48 Months After T he Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation permitted: Max 8 Lacs ] ]

Details: Description :supply Of Set Of Safety Strap For Lhb Type Bio Tank Consisting Of Two Items.(1) S afety Strap As Per Drg.no.mi005712 Alt-c Item No. 01, Qty-01 No. Per Set (2) Safety Strap As Per drg. No.-mi005712 Alt-c Item No.-02 Qty-01 No. Per Set ( Note :- Safety Strap Should Be Along W ith Grooved Rubber Profile As Per Drg. No - Icf/sk 3-6-3-201). Drawing No. Mi005712 Alt-c Item no. 1 And 2 And Drg No. Icf/sk 3-6-3-201. Matl & Specification As Per Drg. [ Warranty Period: 30 months After The Date Of Delivery ] ]

Description: U/s And Condemned Composite Materials Of Iron And Rubber Scraps Of Mibw.qty.=22 Mt. (1)mixed Melting Scrap-injection Moulded Silent Block For Centre Pivot Arrangement Ofbg Coaches(mms).,ratio Of Iron And Rubber 60:40,approx Qty. Of Iron-2400kgs. And Approx Qty. Of Rubber-1600kgs.,total-4000kgs.(2)mixed Melting Scrap-silent Block For Anchor Link Of Bg Coaches(mms),,ratio Of Iron And Rubber 60:40,approx Qty. Of Iron-1800kgs. And Approx Qty. Of Rubber-1200kgs.,total Qty.-3000kgs.(3)mixed Melting Scrap-injection Moulded Silent Block(type-b For Anchor Link(mms),ratio Of Iron And Rubber-60:40,approx Qty. Of Iron-600kgs. And Approx Qty.of Rubber-400kgs.,total-1000kgs.,(4)com Brake Block K-type High Friction Brake Block(cbb),ratio Of Iron And Rubber-10:90,approx Qty.of Iron-100kgs.and Approx Qty. Of Rubber-900kgs.,total-1000kgs.(5)scrap Steel Iron Tubes-hose Connection For Bmbc 15mm Bore(p1),ratio Of Iron And Rubber-10:90,aprox. Qty. Of Iron-100kgs. And Approx Qty. Of Rubber-900kgs.,total-1000kgs (6)scrap Low Phosphorous Ste-ball Joint Traction Lever(pt1)-ratio Of Iron And Rubber-60:40,approx Qty. Of Iron-300kgs. And Approx Qty. Of Rubber-200kgs.,total-500kgs.(7) Mixed Melting Scrap-flexible Joint Roll Link For Lhb Fiat Bogie(silent Block For Anti Roll Bar Link)(mms),ratio Of Iron And Rubber-60:40,approx Qty. Of Iron-1200kgs. And Approx Qty. Of Rubber-800kgs.total-2000kgs.(8)com Brake Block-traction Centre Elastic Joint(cbb),ratio Of Iron And Rubber:60:40,approx Qty. Of Iron-600kgs. And Approx Qty. Of Rubber-400kgs.,total-1000kgs.(9)com Brake Block-lateral Bump Stop(cbb),ratio Of Iron And Rubber:50:50,approx Qty. Of Iron-750kgs. And Approx Qty. Of Rubber-750 Kgs.,total-1500kgs.(10)com Brake Block-primary Bump Stop For Fiat Ir Bogie Rcf Drawing No.lw01102alt.d(cbb),ratio Of Iron And Rubber-10:90,approx Qty. Of Iron-50kgs. And Approx Qty. Of Rubber-450 Kgs Total Qty 500 Kgs (11) Com Brake Block - Rubber Pad For Longitudinal Bump Stop For Lhb Fiat Ir Bogie (cbb) Ratio Of Iron And Rubber 50:50 Approx Qty Of Iron 500 Kgs And Approx Qty Of Rubber 500 Kgs Total 1000 Kgs (12) Com Brake Block - Rubber Pad For Primary Suspension For Fiat Ir Bogie Drawing No 1901097 (cbb) Ratio Of Iron And Rubber 10:50 Approx Qty Of Iron 50 Kgs And Approx Qty Of Rubber 450 Kgs Total 500 Kgs (13) Com Brake Block - Brake Pad Lh And Lh For Lhb Coaches(cbb) Ratio Of Iron And Rubber 10:90 Approx Qty Of Iron 100 Kgs And Approx Qty Of Rubber 400 Kgs Total 500 Kgs (14) Machine Tools- Shock Absorber-600 Kgs (mt-1)ratio Of Iron And Rubber 60:40 Approx Qty Of Iron 300 Kgs And Approx Qty Of Rubber 200 Kgs Total 500 Kgs (15) Em Pad - Buffer Pad,draftpad (m12) Ratio Of Iron And Rubber 20:80 Approx Qty Of Iron 100 Kgs And Approx Qty Of Rubber 400 Kgs Total 500 Kgs (16) Em Pad - Brake Pad (m12) Ratio Of Iron And Rubber 20:80 Approx Qty Of Iron 100 Kgs And Approx Qty Of Rubber 400 Kgs Total 500 Kgs (17) Em Pad - Ladder (m12) Ratio Of Iron And Rubber 20:80 Approx Qty Of Iron 100 Kgs And Approx Qty Of Rubber 400 Kgs Total 500 Kgs (18) Mixed Melting - Vestibule Rubber (mms) Ratio Of Iron And Ruber 10:90 Approx Qty Of Iron 100 Kgs And Approx Qty Of Rubber 400 Kgs Total 500 Kgs (19) Mixed Melting - Grease Seal (mms) Ratio Of Iron And Rubber 80:20 Approx Qty Of Iron 800 Kgs And Approx Qty Of Rubber 200 Kgs Qty 1000 Kgs (20) Mixed Melting -air Spring (mms) Ratio Of Iron And Rubber 10:90 Approx Qty Of Iron 100 Kgs And Approx Qty Of Rubber 900 Kgs Total 1000 Kgs ( Total Qty Of Iron 10150 Kgs And Total Qty Of Rubber 11850 Kgs Total 22000 Kgs (22mt)

Details: Description:- Electric Point Machine Irs Type 220 Mm Throw, High Thrust Rotary Locking Type, Non- trailable To Operate On 110v Dc (with Ip-67 Type 160 V Ac Immunised Motor) As Per Specification No. irs: S-24/2002 Amd-1 Or Latest And Assembly Drawing No. Rdso-s-11000 And Rdso/s-3454 Alt A ver.1 Or Latest Complete With Lock And Detector Slide, Cable Termination Box, Clamp Point Lock 60 Kg tws (rdso S-3395a Or Latest), Along With Ground Connection Such As Switch Extension Bracket (p- bracket), Insulation Plate R.h, Insulation Plate L.h, Irs Point M/c-detector Rod (long And Short). Lock rod (long And Short), Drop Lug, Special Ms Plate As Per Technical Specification.

Details: Description:- Final Location Joint Survey Of Proposed Cable Route Plan (quad / Ofc Cable) And submission For Approval Of Railway.the Details Instruction / Guide Lines Regarding Joint Survey And preparation Of Cable Route Plan Are Given In Tender Document. Contractor Will Submit Two Copies Of prints With Soft Copy To Checking By Railways. If Alterations Are Suggested By Railways, Then Again Two copiesofprintswillbeprovidedforadvanceapprovalaftercarryingoutallthealterationsas suggested / Proposed By Railways. Tracing Will Be Provided To Approval By Railway. All Drawings Will be Prepared In Cad. It Also Includes Preparation And Submission Of Final Cable Route Plan On 75 Micron standard Polyster Film Which Includes Details Of Entire Section In Which Quad / Ofc Cables Are Laid. once Railway Has Approved And Signed Tracings For Cable Route Plan Then Contractor Will Submit 6 (six) Sets Of Zerox Copies For Cable Route Plan In Proper Binding Form.inspection-consignee

Details: Type-4 - Partial Gravity System with Pressure Filter Planning, Design, Investigation, Construction, Erection, Installation, Completion testing and Commissioning in all respect of entire units of Arsenic cum Iron Removal Plant (AIRP) of different capacities capable of removing arsenic & Iron Present in Ground Water in different concentration to acceptable limit as per latest BIS Code manual on basis of departmental process drawing (MODIFIED SUJAPUR SADIPUR) ALONG WITH 3 (Three) years operation & Maintenance after succesful completion of 3 (Three) months Trial Run of "Augmentation of Dakshin Gopalpur ground water supply scheme in Raninagar-I Block, under Berhampore Division-I, P.H.E. Dte. (Capacity-30.00 Cum/Hr.) Name of Scheme- Dakshin Gopalpur W/S Scheme Name of Working Division - Berhampore Division I Block-Raninagar -I Capacity-30 Cum/hr.

Details: Design, engineering, getting approval of Bidder’s drawings & documents from CET / BSL, manufacture / fabrication / procurement, assembly, painting, testing& inspection at works & at site, packing; supply to site, storage in closed store at site with watch & ward, handling & transportation at site, supply of erection materials, fabrication at site; repair / replacement of defective items, erection, testing, facilitating in battery heating-up; commissioning, training, liquidation of defect points, participation in tests for establishment of battery Performance Guarantee (PG) parameters and post commissioning activities till successful handing over to BSL, of all the instrumentation, control &automation (Automation) equipment required for completeness and satisfactory operation of coke oven batter #6 of BSL. as detailed in Technical Specification No. MEC/S/E254/A/10/IP/0851 required for rebuilding of Coke Oven Battery No.6 at SAIL, Bokaro Steel Limited (BSL), Bokaro, Jharkhand.

Details: Description:- Final Location Joint Survey Of Proposed Cable Route Plan (quad / Ofc Cable) And submission For Approval Of Railway.the Details Instruction / Guide Lines Regarding Joint Survey And preparation Of Cable Route Plan Are Given In Tender Document. Contractor Will Submit Two Copies Of prints With Soft Copy To Checking By Railways. If Alterations Are Suggested By Railways, Then Again Two copiesofprintswillbeprovidedforadvanceapprovalaftercarryingoutallthealterationsas suggested / Proposed By Railways. Tracing Will Be Provided To Approval By Railway. All Drawings Will be Prepared In Cad. It Also Includes Preparation And Submission Of Final Cable Route Plan On 75 Micron standard Polyster Film Which Includes Details Of Entire Section In Which Quad / Ofc Cables Are Laid. once Railway Has Approved And Signed Tracings For Cable Route Plan Then Contractor Will Submit 6 (six) Sets Of Zerox Copies For Cable Route Plan In Proper Binding Form.inspection-consignee

Details: Supply And Installation Of Frp Paneling With Fixing Requirements For Side Wa Ll, End Wall And Roof Of Emu/3ph Coaches To Specn.no. Icf/md/spec-167a,issue Status-01, R Ev-05 With Amd-01 To 04 And General Arrangement And Dimensions To Drg.no.emu/c/3ph-4- 2-001, Col-i, Alt-b, Items- 1 To 9 And Icf/mrvc/c3/bt-4-4-302,col-i, Alt- K. Please Visit Icf Vendor Portal For Downloading Drawing Https://vp.icf.gov.in/vendtendordetnew.php Using Key:0724wjznw3b 2699 [ Warranty Period: 30 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ]

Details: Electrification of Enrolment centre and associated works at IGCAR,Kalpakkam. Note 1.This schedule must be read along with the drawing, Specification and scope of work (Section V) and General Specifications (Section VI) for complete interpretation of this scope of work quantitywise. 2.Items of work described in brief below are detailed under Specification of Work. The scope of work will not be estimated from the brief description of this schedule. 3.Rate quoted must include all components required for meeting the specification and performance requirements of the item irrespective of whether they are specifically brought out in this Schedule or not. 4.Tenderers are advised to get acquainted with the site conditions before quoting. 5.Schedule Rate Shall be firm and Overall Conditional Discount for the Total Tendered amount will not be accepted. 6. Rate Quoted Should be inclusive of all taxes including GST. 7.All LED fittings shall be guaranteed for 5 years. Required guarantee certificate shall be obtained from the original manufacturer of the fitting.