Drawer Tenders

Details: Description:- Final Location Joint Survey Of Proposed Cable Route Plan (quad / Ofc Cable) And submission For Approval Of Railway.the Details Instruction / Guide Lines Regarding Joint Survey And preparation Of Cable Route Plan Are Given In Tender Document. Contractor Will Submit Two Copies Of prints With Soft Copy To Checking By Railways. If Alterations Are Suggested By Railways, Then Again Two copiesofprintswillbeprovidedforadvanceapprovalaftercarryingoutallthealterationsas suggested / Proposed By Railways. Tracing Will Be Provided To Approval By Railway. All Drawings Will be Prepared In Cad. It Also Includes Preparation And Submission Of Final Cable Route Plan On 75 Micron standard Polyster Film Which Includes Details Of Entire Section In Which Quad / Ofc Cables Are Laid. once Railway Has Approved And Signed Tracings For Cable Route Plan Then Contractor Will Submit 6 (six) Sets Of Zerox Copies For Cable Route Plan In Proper Binding Form.inspection-consignee

Description: CATEGORY: Black Lead Pencils (V2) as per IS 1375 (Q4) , Metric Scales (Plastic) for General Purposes as per IS 1480 (Q4) , Metric Steel Scales (V2) as per IS 1481 (Q4) , rubber bands (Q4) , Sketch Pen (V2) (Q4) , Permanent Marker Pen (Q4) , Pins, Paper, Straight as per IS 5653 (Q4) , Clips, Paper as per IS 5650 (Q4) , knife blades (Q4) , scissors (Q4) , Stamp - Pad Ink as per IS 393 (Q4) , stamp pads (Q4) , paper or eyelet punches (Q4) , Paper weights (Q4) , Poker or AWL as per IS 10375 (Q4) , Stapler Pin / Staples (V2) (Q4) , Domestic Plates (V2) (Q4) , Transparent Tape (V2) (Q4) , Wax Candle as per IS 11359 (Q4) , Tags for Files (V2) as per IS 8499 (Q4) , Report Cover (Q4) , Carbon Papers as per IS 1551 (Q4) , Plastic Pouches (Q4) , Glue Stick (V2) (Q4) , self adhesive paper note (Q4) , Self Adhesive Flags (V2) (Q4) , Air Freshener Liquid (Q4) , conference folder (Q4) , Highlighter Pen (Q4) , Pen Stand (V2) (Q4) , Labels Stickers (V2) (Q4) , Bond Paper (V2) as per IS 1848 (Part 1) (Q4) , Badge Holders - I Card (Q4) , Desktop Calculator - Electronics (Q4) , Fabric Pin Up Notice Boards (Q4) , Gel Pen (V3) (Q4) , Desk Pads - Writing (V2) (Q4) , Gift Pen (Q4) , Wall Clocks as per IS 12510 (Q4) , Box File (Q4) , Markers for White Board (V2) (Q4) , Cellophane paper (Q4) , Cartridge (Drawing) Paper as per IS 1848 (Part 2) (Q4) , Speed Post Envelope (Large) (Q4) , Plastic Folder with Printing (Q4) , Coloured Cover Paper as per IS 6956 (Q4) , Fluid Correction Pen (V2) (Q4) , Water Jugs (Q4) , Stainless Steel Pole Mounted Stainless Steel Dustbin (Q4) , Tissue Papers (V2) (Q4) , Ball Point Pens (V2) as per IS 3705 (Q4)

Details: Description :supply And Installation Of 1 No Of Minimum 10gm Aerosol Based Fire Detection A nd Suppression System For Low Onboard Panel Of Lhb Eog/hog Type Non Ac Type Coaches, In L ine With Technical Parameters As Per Annexure-g1 Of Rdso Specn. No. Rdso/pe/spec/ac/0192 20 18(rev.1) Or Latest. Approved Makes As Per Rdso Specification No. Rdso/pe/spec/ac/0184-2015(r ev.01) And Rdso Letter No. El/7.1.108/ms/sbc Date 17.09.21. The Layout Drawing No. Cc72081 De mercatting Fitment For Same The Same Is Enclosed. All Necessary Modification, Clamping Arr angement And Accessories Required For Installation Of This Item Shall Be With The Scope Of this Supplier. Oem And Their Authorized Dealers Shall Only Be Considered. [ Warranty Period: 120 Months After The Date Of Delivery ] ]

Details: Description:- Design,manufacture,supply(atsite)of20metrehighmastsystemofhottip galvanized Complete With Head Frame Assembly, Lantern Carriage, Double Drum Winch, Stainless Steel wire Rope, Suitable Control Panel, Timer Switch, Twin Dome Aviation Obstructing Fittings Suitable For high Mast Including Lamps, Electrical Cable, 9 Nos Of 220w High Efficient Led Flood Light Fittings Etc, and Other Standard Accessories Lighting Finial And Winch Gear Box For Simultaneous & Reversible operation Double Drum Winch As Per Specification Enclosed Including Integrated Power Tool With reversibleelectricmotorandfoundationboltsmanufacturesfromspecialsteelalongwithnuts, washers Of Suitable Size Of Anchor Plate And Template And Erection, Testing And Commissioning Of The above High Mast As Per Specification And Drawing Enclosed On The Rcc Foundation By Using Modern engineering Practice By Crane/derrick System Complete In A Manner As Directed By Section Engineer in Charge At Site. Note: 200w Flood Light Fittings Accessories Shall Be As Per Plw Specification

Details: 33551996 shell Kit Items For Lws (752) Coaches A) One Coach Set Of Roof, 2 Mm Sidewall And En d Wall 1)roof Assembly To Drg No 75216001, Alt 'nil' - 1 No. 2)end Roof Assembly To Drg No 58116066, alt 'g' - 2 Nos. 3)sidewall To Drg No 75214001, Alt 'nil' - 1 No. Welding Pin To Be Assembled As Per Drg no 58110037 (with Latest Sub Drawing 49516008 Alt 'a)' 4)end Wall To Drg No 74115001, Alt 'd' - 2 Nos . The Firm Shall Fulfil The Requirement As Per Icf//md/specn.200, Issue Status 01, Rev 04 With Amen dment No. 01. B) Partition Frames And Body Shell Items. 1) 75210012, Alt 'nil' - 1 No. 2) 752100 02, Alt 'nil' - 1 No. 3) 58210036, Alt 'a' - 2 Nos. 4) 75210003, Alt 'nil' - 1 No. 5) 67010011, Alt 'a' - 2 Nos . 6) Aaa10488, Alt 'c' - 6 Nos. 7) 58110017, Alt 'b' - 2 Nos. 8) 58110015, Alt 'a' - 6 Nos. 9) 58110016, Al t 'a' - 3 Nos. 10)aab10338, Alt 'nil' - 16 Nos. C) Under Frame Complete To Drg.no.67011001, Alt 'l' - 1 No. The Manufacturing Facility As Per Icf/md/spec-147, Issue Status-01 Rev.02 With Amen dment No.01 Special Condition : Packing For Roof And Side Wall As Per Schedule A- (to Be Deli vered To Shell) Complete Roof And Sidewall To Be Supplied With Welding Pins Welded To Ro of Assembly As Per Drawing. Schedule B- (to Be Delivered To Fur) Cap To Drg No 49516008002 alt 'a' And Serrated Spring Washer To Drg No 49516008003 Alt 'a' Of Required Quantity As Per Dra wing Are To Be Packed In Suitable Polythene Bags Of 100 Microns Thickness With Printed Label With Com plete Details Kept Inside The Polythene Bags. (complete Details: 1. Item Description, 2. Qty In The Pac king, 3. Date Of Packing, 4. Po No., 5. Type Of Coach, 6. Vendors Name & Address) "polythene Bags to Be Sealed Properly To Prevent Moisture And Water Entry". A0 I) Packing For Roof And side Wall As Per Icf/j&t/misc-2201, Alt 'e' Safety Instruction As Per Icf/j&t/sk-1867, Alt 'nil' I i) Sl.no 16#b Of Note To Drawing No 582-1-6-002 Alt 'j' To Be Strictly Followed. Packing For End Wall as Per Drg.icf/j&t/sk-1809, Alt'a' Packing For Body Shell Items & Partition Frames.icf/j&t/sk -1865, Alt "nil" Packing Condition For Underframe As Per Icf/j&t/misc/2487, Alt 'b' The Under frame Should Be Supplied As Normal Side Up And Side Bearer Side Down. All The Items Are to Be Supplied In Coach Sets. [safety Item] [ Warranty Period: 30 Months After The Date Of Deliv ery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation permitted: Max 8 Lacs ] ] consignee Shell Depot/icf,chennai, Icf Tamil Nadu 212.00 Set inspection details Stage Inspection Not Required

Details: Provn Of External Services At Certain Places At Af Stn Nagpur (ph-i)- Construction Of Block Of Pump House Complete All As Specified And As Shown In Drawings, M&l For Laying And Compacting 250 Mm Thick (compacted Thickness) Granular Sub Base Course (gsb) Grading As Per Grade Ii As Specified Table 400-1 Of Marth Specifications For Road And Bridge Works, 2013, In Two Layers Of Each 125mm Over Compacted Subgrade With Natural Sand, Crushed Gravel, Crushed Stone, Crushed Slag Or Combination Thereof As Per The Grading Required The Materials Are Mechanically Mixed, Spread And Leveling On The Subgrade By Using Motor Grader Of Adequate Capacity, And Rolling With Vibratory Roller Of Capacity 80-100 Kn Static Weight For Achieving Required Compaction Density Of Atleast 98% Of The Maximum Dry Density. Consolidating To Required Gradient And Camber Complete All As Specified And Directed With Finished Surface Tolerances As Per Table 900-1 Of Morth Specifications For Road And Bridge Works, 2013. Complete All As Specified & Directed.

Description: CATEGORY: Prosthetic Orthotic Combined Oven , Combined Oven Stand , Heat Pan H7XD20XL25 For LTTP Sheets , Suction Machine Prosthetic , Air Compressor , Router , Dust Collector , Work Table , Plaster Work Table , Orthotic Oven , Orthotic Oven Stand , Draping by lamination Table , Vaccum Table for Drapping , Combination Grinder , Pillar Drill Machine , Industrial Sewing Machine , Oscillating Saw , Battery Operated Hand Drill , Hand Drill Machine , Jig saw Machine , Hot Air Gun , Orthotic Stand , Anvil 25 Kg , Bench Vice 6inch , Bend Nose Plier , Centre Punch , Chisel Small , Chisel Big , Heavy Duty Knife , Circlip Plier , 3 by 8 Inches Drive Quick Release Ratchet Round Head , Deburring Tool , File Half Round Smooth With Handle, Size 10 Inches , File Round Smooth With Handle, Size 10 Inches , File Flat Smooth With Handle, Size 10 Inches , Hacksaw Frame , Hammer 500gm , Hammer 200gm , Nut Driver 4mm , Plier , Revolving Leather Punch , Screw Driver Set , Steel Scale 60cm , Spanner Set , Scissor Big , Scissor for LTTP Sheet , Shoe Horn- Metallic , T-Handle Allen Key Set with stand , Allen Key set -Foldable , Mallet Hammer , Wooden File , Riveting Bar , Apparatus Bending Brace , Bending Fork , Torque Wrench-Model-AVT-300 , Rivet Cutter , Multipurpose Gripper , Heavy Duty Spring Clamp Plastic , Screw Driver Big , Oven Kevler Gloves , Laser liner , Rotary Burr Ball Nose , Rotary Burr Cylindrical , Mandrel Nylon by MS , Polishing Wheel - Buffer , Drill Bit Size - 1 by 8 Inches , Drill Bit Size - 1 by 16 Inches , Drill Bit Size - 1 by 2 Inches , Drill Bit Size - 1 by 4 Inches , Drill Bit Size - 11 by 64 Inches , Drill Bit Size - 5 by 32 Inches , Plum Line , Hole Saw Cutter 27MM -1 1 by 8 Inches , Hole Saw Cutter 25MM 1 Inch , Hole Saw Cutter 19MM -3 by 4 Inches , Sanding Drum , Sanding Sleeve , Rasp Head , Silicone Dispensing Gun , Silicone Tube for Dispensing Gun , Teflon Sheet , Modification Pipe Vice , Draw Knife , Rubber Bowl , Rubber Bowl Large , Spatula , Surfoam File Flat with Handle , Surfoam File Round With handle , Surfoam File Half Round , Surfoam File Round , Surfoam File Flat , 20 Ltr Bucket , Examination Couch , ML Caliper , Ap or ML Caliper , Copying Pencil , Tube Grip 10mm , Saftey Googles , Ear Protector , Mask , Fire Extinguisher , First Aid , Aprons , Cupboard , Rack , Mirror with wheel stand

Description: Total Qty=321 Nos ,description:-1.released Inter Connecting Jumper For Battery 145 Nos,2.drum Ms 4 Gallon Capacity 55 Nos,3.released Different Type Connectors And Junctions 10 Nos,4.empty Drum 210 Ltrs 28 Nos,5.tarpoline 30' X 15' 1 No,6.tarpoline 1 No,7.stool Teak Wood Dry 2 Nos,8.stool Wooden 18 Inch 4 Nos,9.tw Stool Oval Shape 3 Nos,10.wooden Rack Off Size 1 No,11.wooden Tray 5 Nos,12.tool Board 4 Nos, 13.equipment Chart 0.76 X 0.76 Mtrs 1 No, 14.notice Board 3 Inch X 2 Inch 2 Nos, 15.planning Chart Board 2 X 1.48 Mtrs 2 Nos, 16.board 46.0 X 31.0 Cm 2 Nos, 17.sailent Feature Board 1.04 X 0.90 Mtrs 1 No, 18.pressed Board For Maintenance Chart 1.22x1.23 Mtr 1 No, 19.key Box 12 Inch X 12 Inch 1 No, 20.wooden Stool 24 Inch (lm) 1 No, 21.drawing Table 4'9"x3'3"x3' 1 No, 22.wooden Bench Of Ms Angle Support Off Size 3 Nos, 23.table Wooden 6'x3'x2.5' 1 No, 24.bench Wooden 63"x14"x18.5" 1 No, 25.wooden Bench 48"x18"x18" 1 No, 26.table Tw 5'x3' 2 Nos, 27.chair Tw Crossed Leg 2 Nos, 28.key Box 4 Nos, 29.wooden Box Off Size 2 Nos, 30.duty Duster Board(3,x2.5') 2 Nos, 31.wooden Self 3 Nos, 32.leave Particulars Board 2 Nos, 33.tw Chair With Arms 3 Nos, 34.board 87.0x60.5cm 1 No, 35.chart Board 57x34 Cm 4 Nos, 36.steel Office Table 4'x2'6"x2'6" 1 No, 37.tubular Steel Chair With Arms 3 Nos, 38.chair Steel Tubular Without Arms 8 Nos, 39.waste Paper Basket 2 Nos, 40.artison Tools Almirah (44.5x91.5x104 Cm) 1 No, 41.stool Made Of Steel Size 2.25'(work Bench) 4 Nos.(remarks:- Material To Be Sold On "as Is Where Is Basis " And Material Will Be Delivered In Nos.)

Description: Cond.& U/s Diesel / Ac Loco/emu/c&w/ Lhb Components Such As Tooth Gears, Crank Shaft, Brake Disc, Pinion,injector, Gear Wheel, Cylinder Liners,grease Cup,alternator Fan Cover Filter Assembly, Cattle Guard, Sab Air Brake Components, End Shield, Air Brake Cylinder Components, Shock Absorber, Cattle Guard, Linear,traction Motor Spare Parts, Dust Collector, Motorman Driver Seat Base With Bend, Hp Cylinder Rail Guard, Outer/inner Sleeves Of Bearing Bolts& Nuts, Air Filter, Damper, Lube Oil Filter, Linear, Push Rod &gudgeon Pin, Compressor, Hood With Impeller,ocb Ducts, Labyrinth, End Frame Tamper, Hanger Link, Cylinder Linear, Oil Dispersive, Axle Box Cover, Servo Motor, Pantograph, Deflector For Hitachi Traction Motor, Protective Tube Collars, Alternator Cowl Of Various Sorts, Anchor Link, Flushing Valve, Hydraulic Nut,emu Scrap Including Fan Body, Striker Casting With Grease Adherings(diesel), Impeller, Guard, Compartment Sliding Doors, Compensating Ring, End Sheild ,cartridge With Nu Bearing,pipe, Drum,hoist, Gear, Impeller, Eot Crane Wheels, Eot Crane Gears , Semi Permanent Coupler, Bogie Mounted Brake Cylinder Of Ac Loco,traction Link With Bush, Emu After Cooler, Cr Tank,cbc Restrictor,centre Pivot Block Assembly With Rubber Bush, Draw And Buff Gear, Side Rod, Pull Rod, Pinion Wheel, Pull Lift Chain, Door Closer, Emu Coupler,inter Cooler, Engine Head, Covers, Dooms, Pipes, Tank, Front Cover, Rear Cover, Hand Rail, After Cooler, Cylinder Body, Spring Piston, Holder Plate,sand Box, Labyrinth,outer Bearing Covers, End Shield, Piston Trunk, Adjusting Rod, Palm Pull Rod, Control Arm, Dbr Rf Boxes,hoods, Brake Hanger, Brake Hanger With Head, Brake Head & Semi Permanent Coupler And Parts, Bmbc Components, Bend Cover, Inspection Cover, Centrifugal Dust Collector, Cut Off Angle Cock, Safety Rod, Racker Arm, Valve Plate, Cylinder Bore, Bearing Cover, Emu Sliding Door, Silencer, Racer, Raiser, Bellow Plate, Door Operating Cylinder Scrap, Msu Components Scrap, Labyrinth &pinion Shaft(diesel), Compensation Ring, Buff Gear, Hood With Impeller, Lb Spring Set Scrap, Stator W/o Coil, Contering Dis, Anger Link With Or W/o Silent Block, Oil Cup And All Other Scraps Released From Diesel / Ac Loco/emu/c&w/lhb Components And All Other Ms/ci With/without Minor Non Ferrous Attachments In As Is Where Is Condition. 1.cutting Permitted To Heavy Nature Items Only. 2.during Delivery If Any Major Non Ferrous Items Found The Same Should Be Handed Over To Custodian. 3. Loading By Crane Is Also Permitted. Pl No.98050126. Custodian: Cdms-rsf-gsd-per. Location: Bin M

Details: Description:- Supplyandfabrication Of Any Steel Bridge Members For Repairing/strengthening Or modification Of Bridge Girders By Providing Plate Etc Or Any Other Steel Member For Provision Of inspectionfacilitiessuchasplatformetcmadeupofmsplate,angle,channelsofdifferent dimensions Including Painting With One Coat Of Ready Mixed Zinc Chromate Conforming To Is: 104 followed By One Coat Of Ready Mixed Zinc Chromate Red Oxide Conforming To Is: 2074 On The Contact surface Of New Members And One Thick Coat Of Ready Mixed Zinc Chromate On The Contact Surface Of existing Members. All Ms Section Shoud Confrm To Is: 2062 E 250b0 . Fabrication To Be Done As Per existing Or As Per Approved Drawing Or As Per Instruction Of Engineer In Charge. The Rate Shall Include supply And Cutting Of New Steel Section, Drilling For Rivetting/bolting, Assembling/fixing Of Members initially By Service Bolts & Nuts And Finally By Rivetting/hsfg Bolts & Nuts With Dti Washer Etc Or By welding Or As Directed By Engg. In Charge With All Tools, Plants, Labour, Consumables, Machineries And accessories Etc. The Work Will Be Executed As Per Irs: B1-2001 And Irbm With Latest Corrigendum.