Drawer Tenders

Details: Description :supply Of Set Of Two Items For Winterthur Bogie Of X-class Locomotive Confirming To The Drawings As Mentioned Below Item No (1). Centre Pin For winterthur Bogie Of X Class Locomotive As Per Drg No Goc/x/pn-18-03060 Qty-1 No/set Item No (2). Bearing For Center Pin For Winterthur Bogie Of X Class Loco motive As Per Drg No Goc/x/bg-18-03030 Qty-2 Nos/set Note: 1. Item 01 To 02 Consists Of One Set. 2. For Equivalent Material Specification Refer Goc/x/spec- x-032 3. One Integral Test Piece Should Be Provided For Each Item, It Should Be Parted In Presence Of Railway Authority For Material Testing Before Machining. [ warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Description :manufacture And Supply Of 6400 Mm Thick Web Curved Switch For 1 In 8.5 Symmetrical Split Turnout On Psc Sleepers As Per Rdso Drg. No. Rds o/t-8708 Or Latest Alterations If Any, Complete With All Parts/fittings As Per Attached Annexure -a. Confirmation To Ir Specification No. T-10- 2023 Or Latest Alter ations If Any And Ir Specification No. T- 62-2022(for End Forging Of Thick Web Asymmetrical Rail) & Str Tdg 0038 (rev. "0") Or Latest If Any. (the Alt In Drawing and Specification Issued By Rdso Up To One Month Prior To Tender Opening Date Shall Be Applicable In This Tender). Note : - The Purchase Of Rails Will Be The Sol e Responsibility Of The Manufacturer (bid Including Rail Cost/per Set) In Terms Of Railway Board Letter No. 2022/track-i(p)/fabricators Dt. 31.07.2023 [ Warrant y Period: 30 Months After The Date Of Delivery ] ]

Details: Description:- Design Of Ballastless Track Using Contractor's Own Fastening System For Axle Loads And speeds As Specified In The Technical Requirements & Technicalspecifications, Including Submission Of design Criteria, Calculations, Designmethodology,detailed Design, Detailed Drawings, Construction methodology, Qap, Maintenance Manuals, Damage Rectification Methodology, Including All Its Various components As Per Various Input Parameter And Characteristics Of Various Component Of Fastening system, Etc As A Complete Job And As Directed By Engineer In Charge. The Design Will Be Property Of railway To Be Used In The Entire Rewa To Sidhi And Satna-panna Section For New Bg Rail Line Project.(a) for Track In Straight And Curves In Tunnels & Over Bridges Including Transition At Approaches.(b) For switch Expansion Joints (sej) Including Transition Portion If Any.(c) For Track In Straight And Curves On formations (cutting/filing) Including Transition Portion.(d) For Point And Crossings (1:8.5, 1:12 & 1:16) including Transition Portion If Any. (per Unit = Open Job (ls))

Details: Design, Construction, Supply, Installation, Testing & Commissioning Of Civil Works For Sewage Treatment Plant (stp) Of Capacity 3000 Kld (2 Modules Each Of 1500 Kld) And Electro Mechanical Cum Instrumentation Work All Complete For 1500 Kld, (module-1) Stp Based On Sequential Batch Reactor (sbr) / Mbbr Aerobic Treatment With Nitrification, Denitrification, Tertiary Treatment For Phosphorous Reduction Technology. Preparation Of Civil, Architectural, Structural, Shop Drawings Etc. And Execution Of Civil Works For 3000 Kld Including Epoxy Painting From Inside The Tank For Water Proofing And All Other Ancillary Work With Minimum M-30 Grade Concrete, Construction Of Plant Room (to Accommodate 2 Modules Each Of 1500 Kld) Including Defect Liability And O&m For 5 Years, For Reuse/disposal Of Treated Waste Water As Per Latest Guidelines Of Cpcb/uppcb/hon.ngt; At “ugcc 200 Acers Unitech, Segment-2, Sector 96, 97 & 98 At Noida, U.p.

Description: Cut Up Scrap Of Condemned Overaged Wagons No.1)85079460344 Ser Bvzc Air Brake2)30038961653 Nr Bcnm1 Air Brake3)30058961497 Nfr Bcnm1 Air Brake4) 30078962030 Ser Bcnm1 Air Brake5) 30028965647 Er Bcnm1 Air Brake6)30098962188 Scr Bcnm1 Air Brake7)30058966478 Nfr Bcnm1 Air Brake8)30098961242 Scr Bcnm1 Air Brake9)30028965968 Er Bcnm1 Air Brake10)10079464498 Ser Boxnm1 Air Brake11)30038802796 Nr Bcnm1 Air Brake12)30018714156 Cr Bcnm1 Air Brake13)30078964003 Ser Bcnm1 Air Brake14)30018765530 Cr Bcnm1 Air Brake15)30018962922 Cr Bcnm1 Air Brake16)30018963141 Cr Bcnm1 Air Brake17)30028961427 Er Bcnm1 Air Brake18)30018962441 Cr Bcnm1 Air Brake19)30058961206 Nfr Bcnam1 Air Brake20)30078962160 Ser Bcnm1 Air Brakeitems To Be Reclaimed In Sr. No. 1 To Sr. No.20 (1) 01 Wheel Set=02 Wheel With 01 Axle & 02 Axle Bearing Comp=04 Nos ( Sr.no.1=02 Nos) (2) As Per Drawing No-sk 69595,sk-69594,sk-69592,sk-77578,sk-78527,wd-83069-s/1,wd-95005/s-1) 01 Complete Casnub Bogie Assembly With Available Fitting{( 02 Side Frame, 01 Bolster, 01 Spring Plank ,02 Complete Break Beam (1 Bogie Brake Push Rod, 2 Equilising Lever, 4 Bk/bl),04 Adapter, 04 Em Pad, Helical Spring (outer-14, Inner-10, Snubber-04) Etc)}]= 2 Nos (except, Sr.no.2, Sr.no.8, Sr.no.13, Sr.no.15, Sr.no.19, Sr.no.20 And Sr No.01 Without Bogie,) (3).cbc Assembly = 2 Nos (4) Draft Gear Yoke Assembly=2 Nos. (5) D.v. With Common Pipe Bracket= 01 No.(6) Bk Cylinder= 1 Nosnote- All Reclaimed Items To Be Returned By Purchaser To Railway In Safe And Sound Condition.note (1)delivery Given At Wagon Cutting Yard At North Gate,32 Quarter Dahod/ Wagon Cutting Side At Iow Sliding/rgm Sliding, Iow, Dahod (2) Custodian- Sse Inspection (r) Dahod (3)location Dahod Workshop 4)gst-18% 5)cutting Allowed For Easy Loading. Fdp 50 Daysnote(6)-wagon Cutting And Loading To Be Carefully Done By Purchaser And No Littering To Be Done By Concerned Labour Of Purchaser At Cutting Location.

Description: CATEGORY: Wash hand basin white of size 450mmx300mm , PPR Reducer Elbow 32mm x 20mm dia , Brass CP Wall Mixer for mixing hot and cold water , Distribution box 8 way double door SPN , MCB SPN 240 Volts 32 Amps , MCB SP 6 to 32 Amps , PVC tape 19mm wide 5 m long , Cable PVC insulated electric cables of size 1.5 Sqmm single core , Cable PVC insulated electric cables of size 2.5 Sqmm single core , Cable PVC insulated electric cables of size 4 Sqmm single core , PVC casing capping of size 1inch medium grade , PVC casing capping of size 3 by 4 inch Medium Grade , Switch Piano 5 Amp 230 Volts Flush type one way , LED Tube light fittings 15W 230V box type 4 feets with CRCA body , Steel screw full thread with rawl plug of 1 1 by 2 inch , PVC switch board size 7 inchx4 inch , PVC switch board size 8 inch x 10 inch , PVC L bend and T junction , Switch socket combination 2 in 1 and 15 Amp 230 Volts , Switch socket combination 5 Amp 230 Volts , Service bracket 40mm dia GI Tubing medium grade 1.5 Mtr Long , Service cable PVC insulated aluminium conductor 10 Sqmm 2 , Ceiling Rose three terminal , LED Bulk head fitting with LED lamp 10 watts , PVC Flexible wire copper conductor multi stranded 0.0016 by 76 , PVC Flexible Conduit pipe 15 mm dia , PVC Round or Squire Block , Fire extinguisher of one kilogram capacity , Exhaust fan 230 volts 300 mm sweep plastic body , Water cooler of capacity 40 ltrs , Earthing plate 600 x 600 x 6 mm , CI earth pit cover of size 300 x 300 x 6 mm , Funnel fitted with 20 mm diameter GI Pipe 1.5 m Long. , GI wire 4 mm diameter , Charcoal , Salt normal , Air termination single pointed aluminium rod 12 mm dia and 300 mm long. , Testing point terminal block make of gun metal , Aluminium strips 25 x 3.0 mm , Galvanised Iron strip 32 x 6 mm , Insulating PVC block 75x75x30mm with insulating clamp nut and bolt , Silver Stainless steel table 1800x900x750mm , Dining Chairs steel made out of superior quality , Water Dispenser of 230 V 500 Watts without refrigerator , Study table of size 4x2 wooden top on round tube structture with three drawers , Study chair of size length 56cm height 82 cm width 56 cm Lacqured finish , Plastic dustbin of capacity 10m ltrs , Peg set of six

Details: Description:- Modification/alteration In Existing Medha Make Ei (electronic Interlocking) As Per Latest rdso Guidelines/tan. It Includes: Design And Modification In Existing Interface And Interlocking circuits And Logic Of Ei System Including Modification In The Vdu (video Display Unit)/ Lcp (local control Panel)/ Ccip (control Cum Indication Panel), Maintenance Terminal (mpc), Data Logger, Relay rack Wiring. The Complete Work Should Comply With The Latest Rdso Specifications And Guidelines And as Per Approved Sip And Circuit Diagrams. All The Material (interface Cards/relays/wiring Material/ connectors/fuses /communication Devices Etc.) Shall Be Provided By The Contractor. The Work Also includes The Supply Of Modified Selection Table, Interface Circuits, Vdu/lcp/ccip Diagram Etc. To Suit the Modified Sip. It Also Includes The Carrying Out Of Fat, Sat Or Two Rounds Fat (as Applicable) Jointly with Railways And Satisfactory Commissioning. All Plans/drawings/circuits Etc. Should Be Prepared On autocad, Softcopy To Be Supplied In Pen Drive And 06 Sets Of Hard Copies Also To Be Supplied(as Per condition In Tender Docuemnts)

Details: Description:- Modification/alteration In Existing Ansaloda Make Ei (electronic Interlocking) As Per latest Rdso Guidelines/tan. It Includes: Design And Modification In Existing Interface And Interlocking circuits And Logic Of Ei System Including Modification In The Vdu (video Display Unit)/ Lcp (local control Panel)/ Ccip (control Cum Indication Panel), Maintenance Terminal (mpc), Data Logger, Relay rack Wiring. The Complete Work Should Comply With The Latest Rdso Specifications And Guidelines And as Per Approved Sip And Circuit Diagrams. All The Material (interface Cards/relays/wiring Material/ connectors/fuses /communication Devices Etc.) Shall Be Provided By The Contractor. The Work Also includes The Supply Of Modified Selection Table, Interface Circuits, Vdu/lcp/ccip Diagram Etc. To Suit the Modified Sip. It Also Includes The Carrying Out Of Fat, Sat Or Two Rounds Fat (as Applicable) Jointly with Railways And Satisfactory Commissioning. All Plans/drawings/circuits Etc. Should Be Prepared On autocad, Softcopy To Be Supplied In Pen Drive And 06 Sets Of Hard Copies Also To Be Supplied(as Per condition In Tender Docuemnts)

Details: Modification /alteration In Existing Ei (electronic Interlocking) As Per Latest Rdso Guidelines /tan. It Includes: Design And Modification In Existing Interface And Interlocking Circuits And logic Of Ei System Including Modification In The Vdu (video Display Unit)/ Lcp (local Control Panel)/ ccip (control Cum Indication Panel), Maintenance Terminal (mpc), Data Logger, Relay Rack Wiring. The complete Work Should Comply With The Latest Rdso Specifications And Guidelines And As Per Approved s I P A N D Circuit Diagrams. A L L The Material (interface Cards/re1ays/wiring Material/ Connectors /fuses/communication Devices Etc.) Shall Be Provided By The Contractor. The Work Also Includes The supply Of Modified Selection Table, Interface Circuits, Vdu/lcp/ccip Diagram Etc. To Suit The Modified sip. It Also Includes The Carrying Out Of Fat, Sat (as Applicable) Jointly With Railways And Satisfactory commissioning. All Plans/drawings /circuits Etc. Should Be Prepared On Autocad, Softcopy To Be supplied On Pen Drive And 06 Sets Of Hard Copies Also To Be Supplied.(alteration Involving Modification from 11 Up To 20 Routes. )

Details: Description:- Excavation Of Cable Trench As Per Cable Route Plan, 1.2 Mtr. Deep And Of 0.3 Mtr. To 0.6 Mtr. Wide At bottom As Per Rdso Sketch No. Sdo/cable Laying/003, Issued Vide Rdso Document No. Rdso/si/g/2010 Version 1.1 dated 04.02.2014 Or Latest, Alongside The Track In Normal Soil/strata (including Soft Rock), Conforming To Distances As Per cable Route Plan And Refilling And Ramming Of Loose Soil. This Work Includes Clearing Of Route From Bushes Etc, Covering of Cable Laid In Trench By Loose Soil For A Layer Of 50mm Thickness Approximately Before Covering By Bricks. (bricks To Be laid As Per Existing Norms Of Irsem And Ncr/hq). The Work Shall Be Done As Per The Extant Practice On North Central railwayandinstructionsofrailwayengineeratsite.incasethefulldepthisnotavailable,thereshallbeno proportionate Payment And After The Approval Of Minimum Jag Officer, The Concreting Shall Be Done As Per The Rdso drawing No.sdo/cable Laying/008, Issued Vide Rdso Document No. Rdso/si/g/2010 Version 1.1 Dated 04.02.2014 Or latest. Insp. By-consignee