Telecommunications Consultants India Limited Tender

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.

Laying of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable along with PLB HDPE telecom duct (40/33mm) and accessories, joint chambers, RCC route/joint indicators, or any other accessories required as per TEC-GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Excavation of trench for PLB pipe laying, backfilling, reinstatement and compaction after laying of PLB pipe, laying / blowing of Optical Fiber Cable inside laid PLB pipe, splicing and jointing of Optical Fiber Cable including supply of As Built Diagram (ABD) of constructed OFC Route. 3. Commissioning, Acceptance Testing and makeover of the routes, commissioning of armored optical fibre connectivity from the Block PoP to GP room and termination at GP FDMS/ FTB and end to end testing of dark and lit fibre per GP (for Underground laying). 4. Capturing the Latitude-Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos. Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket

Laying of 24F Metal Free Aerial Optical Fibre Cable (24F ADSS) along with required accessories including RCC poles and joint chambers, RCC route/joint indicators, and any other accessories required as per TEC GR including transportation, freight, insurance and warehousing etc. Services will include following: 1. Physical survey of block to GP route, capturing the Latitude-Longitude of OF cable route, electronics infrastructure, preparation of GIS survey report before execution of works. 2. Blowing, pulling and commissioning of 24 core optical fibre connectivity from Block PoP to GP room and termination at FTB/ FDMS. The cost shall include laying, fittings, splicing, splitting, splice closure, Pole clamping installation, termination at FTB/FDMS & all the relevant accessories etc. and end to end testing of dark and lit fibre per GP (For Aerial laying) of Optical Fibre Cable. Supply of As Built Diagram (ABD) of constructed OFC Route and Acceptance Testing, commissioning and makeover of the routes. The work also includes road / bridge crossing, providing protection as per EI wherever required and obtaining Right-of-Way (RoW) permissions. (As per the Engineering Instruction at Section (IV C), Annexure-C of Client Tender No.- MM/BNO&M/BN-III/T-791/2024 issued on 15.02.2024). 3. RCC Poles swaged of the length 7/8 meters (includes installation) by not utilizing existing power infrastructure of State Discoms upto extent maximum possible. 4. Longitude of OF route & joint location after execution of works from GP to villages, capturing coordinates of electronics infrastructure along with integration of GIS data with As Built Diagram of OF routes, videography and photos as defined in scope of work section of this RFP Note: Following Items shall be in scope of TCIL: i. Supply of 48F Ribbon type/ 24F type loose tube armoured optical fibre cable; ii. PLB HDPE telecom duct (40/33mm) and its accessories; iii. Supply of Clamped Joint Closures (SJC & BJC) and iv. Supply of Installation of FDMS/ FTB. v. Central Warehouse in each state shall be provided by TCIL vi. Supply of Aerial Cable accessories- Tension Set, Suspension Set & C-Bracket Please note that maximum quoted rate will not be more than 2.5 times of Item at Sl. No. 2.1 above.