Irrigation And Flood Control Department Tender

Providing and laying 75 mm thick compacted bed of dry brick aggregate of40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge

Demolishing cement concrete manually/ by mechanical means includingdisposal of material within 50 metres lead as per direction of Engineer - in- charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Brick work with commonburnt clay F.P.S.(non-modular) bricks of class designation 75 in foundation and plinth in: cement mortar 1:4 (1cement:4 coarse sand)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and laying (RMC) of M-30 grade by using minimum 400 kg of cement (43 grade, OPC) per cum of concrete in roads/streets manufactured in automatic RMC plant using coarse sand and graded stone aggregate of 20 mm nominal size in appropriate proportion as per approved design criteria including transportation to site in transit mixer, including cost of admixture in recommended proportion as per IS 9103 to accelerate/ retard setting of concrete to improve workability with out impairing strength and durability as per specification including spreading and compacting mechanically by using needle and surface vibratos, leveling to required slope & camber, finishing by floating & brooming with wire brushes etc. and curing including making provision for contraction. expansion, construction of cross/longitudinal joints of size 10 mm wide 50 mm deep by groove cutting machine, providing and filling joints with approved joint filler and sealants, etc. complete, as per direction of Engineer-in-charge.(Cost of joint filler & sealants shall be paid for separately under relevant items). Note:- Cement content considered in M-30 is @ 400 kg/cum excess cement used will not be payable and less cement used as per design mix is recoverable @ Rs. 10/- Per kg. separately

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar

Submission of 3rd party Quality control inspection report. The thirty party quality control check will be carryout by any one agency i.e CRRI,IIT Delhi, Delhi college of Engineering, EIL, WAPCOS, JAMIA ISLAMIA University and Ch. Brahm Prakash Govt. Engineering College Delhi or by any other agency approved by Engineer-in-charge . Note :- payment to the third party will be made by contractor which will be reimburesed by the department after satisfactory completion of work. The payment to the third party in any case shall not be more than 1% of total tendered amount of Item No. 1 to 12 only.

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality EHD - 35 Circular shape 560 mm internal dia.

Excavation of silt, slush in or under water from side drains lift upto 1.50m including getting out the excavated soil & disposal of surplus excavated soil as directed within a lead of 50m. All kind of soil.