Delhi Development Authority Tender

Operation and maintenance of water supply pump set and D.G. set at 70 LIG Poorvi shalimar Bagh as per the inventory and terms & conditions attached.

Lifting &Lowering of 12.5 HP/7.5 HP sewage submersible pump set for cleaning & removing clotted sludge and debaris in Jaal, pump set & pipe line from the existing open well etc. For 2No's pump at DA Block Shalimar Bagh, 2No's Pump at C&D Block Shalimar bagh,& 2No's Pump at Transport Centre Punjabi bagh = total 6No's pump as required at site.

Operation of following capacity of lifts i/c the rescue operation in case of power /lift failure as per terms & conditions attached.

62.5 KVA

Supplying and replacement of fully charged lead acid battery of 80 Ah capacity 12Volt including dismantling of old battery, connection and testing, earthing etc. as required.

Repairing / rewinding of 7.5 HP sewage sub. Pump set and replacement of following worn-out parts and dismantling, re-assembling i/c cartage to and fro, testing on load etc complete as required at site

Rewinding of 7.5 HP motor – 1 Job

Mechanical seal upper & lower – 1 set.

Ball bearing ( 6309& 6310)-1 Set

O' Ring Set- 1 set

Supply & fixing of 20 Watt size (1100x24x35)mm LED batten with polycarbonate housing and integrated electronic driver fixing on surface and wall mounted i/c testing& commissioning etc complete as required.

Supplying & replacement of 10 mm GI galvonized block chain for hanging of 7.5 HP/ 12.5 HP submersible dewatering pump i/c testing, fixing etc. as required.

Supplying & replacement of 4 inch flexible PVC pipe for delivery section from outlet of seawage pump to floors i/c clamping, fixing, testing etc. as required.

Supplying, installation, testing & commissioning of cubicall type LT panel suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system having depth 300 mm fabricated in compartmentalized (preferably) design from CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland, plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having suitable capacity ( as mentioned in individual panels ) extensible type TPN aluminum alloy bus bars of height conductivity, rotary handle and spreader terminals of suitable capacity for MCCBs, bottom base channel of MS section not less than 100 mm x 50 mm x 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common G.I. earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with suitable size. PVC insulated copper conductor S/C cable, cable alleys, cable gland plates in two half, i/c providing following switch gears . Panel shall be as per IEC 61439 Note:The execution time for this item is only 45 days from the stipulated date of start of the work.

C&D Block Shalimar Bagh LT Panel INCOMER : 1 No.200A FP MANUAL CHANGEOVER SWITCH 2 Nos 200A FP MCCB 25KA TM RELALESE WITH OL,SC PROTECTION with Rotary Handel 1 set of On Off ,Tripand Phase indicating lamp with MCB 3Nos. RED PHASE INDICATING LIGHT, 220V AC 22.5SQ MM 2Nos. Set yellow,Blue and Green Phase Indicator,220V AC 22.5SQ MM 10 Nos.6A MCB 10KA C-Curve 3Nos.Neutral Link 32A 1No. Single Phase Preventor 3Nos.CT for metering,200/5A CL-1.0, 15VA BUS BARS: 250 A bus bars of aluminium alloy. 30HP STAR-DELTA STARTER 2 Nos. 100 A 415V, TP MCCB of 25 KA with overload, short circuit protection. 50A TP Power Contactor With 2NO+2NC AUX 220V AC 32A TP Power Contactor With 2NO+2NC AUX 220V AC Overload relay 22-32 A 2 Sets of Red,Green,Amber Indicating Light, 220V AC 22.5 SQ MM 2 Sets Red Push Button With 1NC and 1 NO ELEMENT 22.5 sqmm 12 Nos. power terminal stud type 25 sqmm 5HP DOL STARTER 32A TP mcb 10KA C- curve 22A TP power contactor with 2NO+2NC Aux 220V AC Over Load relay 6 - 9A 2 Sets of Red,Green,Amber Indicating Light, 220V AC 22.5 Ssqmm 2 Sets Red& Green Push Button with 1NC and 1 NO ELEMENT 22.5 sqmm Auto Manual sel switch 1P,2 way with off 6A SP MCB 10kA C- Cureve - 2 Nos. Neutral Link 32A - 2 Nos. Power Terminal stud type 16 sqmm - 6 Nos.

D&A Block Shalimar Bagh LT Panel INCOMER : 1 No.200A FP MANUAL CHANGEOVER SWITCH 2 Nos 200A FP MCCB 25KA TM RELALESE WITH OL,SC PROTECTION with Rotary Handel 1 set of On Off ,Tripand Phase indicating lamp with MCB 3Nos. RED PHASE INDICATING LIGHT, 220V AC 22.5SQ MM 2Nos. Set yellow,Blue and Green Phase Indicator,220V AC 22.5SQ MM 10 Nos.6A MCB 10KA C-Curve 3Nos.Neutral Link 32A 1No. Single Phase Preventor 3Nos.CT for metering,200/5A CL-1.0, 15VA BUS BARS: 250 A bus bars of aluminium alloy. 30HP STAR-DELTA STARTER 2 Nos. 100 A 415V, TP MCCB of 25 KA with overload, short circuit protection. 50A TP Power Contactor With 2NO+2NC AUX 220V AC 32A TP Power Contactor With 2NO+2NC AUX 220V AC Overload relay 22-32 A 2 Sets of Red,Green,Amber Indicating Light, 220V AC 22.5 SQ MM 2 Sets Red Push Button With 1NC and 1 NO ELEMENT 22.5 sqmm 12 Nos. power terminal stud type 25 sqmm 5HP DOL STARTER 32A TP mcb 10KA C- curve 22A TP power contactor with 2NO+2NC Aux 220V AC Over Load relay 6 - 9A 2 Sets of Red,Green,Amber Indicating Light, 220V AC 22.5 Ssqmm 2 Sets Red& Green Push Button with 1NC and 1 NO ELEMENT 22.5 sqmm Auto Manual sel switch 1P,2 way with off 6A SP MCB 10kA C- Cureve - 2 Nos. Neutral Link 32A - 2 Nos. Power Terminal stud type 16 sqmm - 6 Nos.

BH Block 70 LIG Shalimar Bagh INCOMER : 100A FP MCCB 25KA TM RELALESE WITH OL,SC PROTECTION SPREADER LINK FOR 100A FP MCCB ROTARY HANDEL FOR 100A FP MCCB RED PHASE INDICATING LIGHT, 220V AC 22.5SQ MM YELLOW PHASE INDICATING LIGHT, 220V AC 22.5SQ MM BLUE PHASE INDICATING LIGHT, 220V AC 22.5SQ MM CT FOR METERING, 100/5A CL-1.0, 15VA DIGITAL VAF METER 96X96SQ MM AUX 230V AC 6A SP MCB 10kA C-CUREVE NEUTRAL LINK 32A SINGLE PHASE PRIVENTER AUX RELAY FOR SPPR RELAY MULTYPLY CONT.AUX220V AC BUS BARS: 150A 4 Pole Alluminium alloy 5HP DOL STARTER 32A TP MCB 10KA C-CURVE 22A TP POWER CONTACTOR WITH 2NO+2NC AUX 220V AC OVER LOAD RELAY 6 - 9A RED INDICATING LIGHT, 220V AC 22.5SQ MM GREEN INDICATING LIGHT, 220V AC 22.5SQ MM AMBER INDICATING LIGHT, 220V AC 22.5SQ MM GREEN INDICATING LIGHT, 220V AC 22.5SQ MM GREEN PUSH BUTTON WITH 1NO ELEMENT 22.5SQ MM RED PUSH BUTTON WITH 1NC ELEMENT 22.5SQ MM AUTO MANUAL SEL SWITCH 1P,2WAY WITH OFF 6A SP MCB 10kA C-CUREVE NEUTRAL LINK 32A POWER TERMINAL STUD TYPE 16SQ MM 1HP DOL STARTER 16A TP MCB 10KA C-CURVE 9A TP POWER CONTACTOR WITH 2NO+2NC AUX 220V AC OVER LOAD RELAY 4-6A RED INDICATING LIGHT, 220V AC 22.5SQ MM GREEN INDICATING LIGHT, 220V AC 22.5SQ MM AMBER INDICATING LIGHT, 220V AC 22.5SQ MM GREEN INDICATING LIGHT, 220V AC 22.5SQ MM GREEN PUSH BUTTON WITH 1NO ELEMENT 22.5SQ MM RED PUSH BUTTON WITH 1NC ELEMENT 22.5SQ MM AUTO MANUAL SEL SWITCH 1P,2WAY WITH OFF 6A SP MCB 10kA C-CUREVE NEUTRAL LINK 32A POWER TERMINAL STUD TYPE 10SQ MM FEBRICATION PANEL ENCLOSURE 2.0/1.6MM THICKNES INDOOR TYPE POWDER COATED RAL7035 WITH ORANGE MOUNTING PLATE, WALL MOUNTED TYPE

Supply and fixing of 70 Watt compact LED street light with aluminium housing PDC with toughened glass optical cover to ensure IP-66 protection, integrated electronic driver with rated input voltage 140-270 V AC supply, Lumen output not less than 8400 Lm, system efficacy not less than 120 Lumen/watt, Color temperature (CCT)-5700K-6500 K, CRI>80, Monting clip i/c all required accessories, making connection, testing etc complete as required..