Municipal Council Tender
View complete overview of Daman & Diu Municipal Council Tender
Municipal Council Tender
Eprocure
Opening Date25 Mar 2021
Closing Date14 Apr 2021
Tender Amount₹ 7,57,02,120
Costs
EMD
₹ 15,14,100Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_DIUDT_1423_1Bid Award Id
ViewTender No
36/2020-21/DSCL-DIUTender Authority
Municipal Council ViewPurchaser Address
-Website
http://ddtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Propping and supporting the structural elements and its adjoining areas with tubular steel props (adjustable or as required), bracings, steel and wooden runners etc. to relieve the structural member of the required load coming over it as per the pattern given by the contractor - Providing and fixing of adjustable span ESO+SI (2.35-3.40) as per directions of Engineer-in-Charge.
185
-
-
... More
Pani Bai School - Sub Head 02 - Dismantling and Demolishing Work
-
-
-
... More
Removing and scraping of old deteriorated plaster of any thickness from wall / RCC member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift.
3923
-
-
... More
Demolition of Brick work and stone masonry done in lime mortar including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift mortar.
180
-
-
... More
Demolition of RCC work including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.
2
-
-
... More
Demolition of lime concrete and disposal of unserviceable materials with all lead and lift.
50
-
-
... More
Demolition of Cement concrete and disposal of unserviceable materials with all lead and lift.
3
-
-
... More
Dismantling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift. (i) Not exceeding 3 Sq.m in area.
31
-
-
... More
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
2
-
-
... More
Dismantling wood work, wrought framed and fixed in framed trusses including stacking the materials with all lead and lift.
31
-
-
... More
Dismantling steel work including segregating and stacking the materials with all lead and lift
500
-
-
... More
Dismantling stone slab roofing over wooden karries (dismantling karries to be paid for separately), including stacking of serviceable material and disposal of unserviceable material in all lead and lift.
5
-
-
... More
Excavation for foundation upto 1.5 m depth including soritng out and stacking of useful materials and disposing off the excavated stuff upto 50m lead. (A) Loose or soft soil
149
-
-
... More
Excavation for foundation for depth from 1.5m to 3 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 m lead. (A) Loose or soft soil.
2
-
-
... More
Manually removal of vegetation (major trees, climbing plants, creepers) from roof slab, walls, columns, arches, floor etc in a skilled and careful manner, using appropriate tools and means and without causing any damage to the adjoining parts, including carrying and stacking the dismantled materials including lift/lower upto roof vault, minarets, terrace etc, as directed by the engineer or architect in charge. The exposed surfaces will be coated with a paste made from ammonium sulphamate crystals or with "Tree killer" available in market. In this condition the root system may be left to absorb and die. Large sections of dead wood must not be left within the core. As they decay they will remove support and create voids and weaknesses in the wall. Pull off a well‐established mat of vegetation must be resisted. LIME based mortar will be used for Tamping, grouting, pointing, plastic repairs and resetting of brick / stones after removal of vegetation, must all be anticipated as remedial work as directed by Engineer-in- Charge:
15
-
-
... More
Removing of old sulphated lime wash/white or colour wash in multiple applications without causing damage to the below stone/brick/plastered surface. Scrubbing (not by scraping which leaves surfaces scarred and scratched) with nylon bristle brushes and hot water (Care to be taken if the surface is weak one it will break down). Hot water should be used if the lime wash has an oil or tallow binder. Gentle cleaning with air abrasive tools can be used if the wall surface is not very week. The final clean will almost invariably have to be carried out by hand scrubbing and rinsed with clean water on completion. The work should be done under supervision of a trained conservator as directed by Engineer-in- Charge:
392
-
-
... More
Poulticing for Plain walls (Stone, brick, plastered surfaces) Providing and enabling for additional treatment for poulticing of stone, removal of sulphate accretions and gentle stone cleaning using ammoniacal paper poulticing and clay packs cleaning as specified by Site supervisor. This item to include cleaning orifices, removing encrustations for elements such as gargoyles, water trough and all other similar components etc., complete.
196
-
-
... More
Poulticing for art work (Stone, brick, plastered surfaces) Providing and enabling for additional treatment for poulticing of stone, removal of sulphate accretions and gentle stone cleaning using ammoniacal paper poulticing and clay packs cleaning as specified by Site supervisor. This item to include cleaning orifices, removing encrustations for elements such as gargoyles, water trough and all other similar components etc., complete
196
-
-
... More
Steam Cleaning Providing for Steam cleaning process (Machine), with specified pressure and temperature, so as not to damage or erode the parent surface of stone, plaster, brick etc. The steam cleaning should be done in expert supervision only. The direction of steam jet / nozzle should be pointed at an angle of 45-30 degree to the cleaning surface, never to be pointed at perpendicular to the surface as directed by Engineer-in- Charge:
784
-
-
... More
Pani Bai School - Sub Head 03 - Structural Repairs
-
-
-
... More
Steel‐rod stitching in cracked stone patties, beam and lintels. Providing and fixing stainless steel rods of 90cms length of which 15cm on either side and cold bending at 90degrees. The stainless steel clamps to be fixed perpendicular to the crack by drilling in stone and fixing with quartz sand (1:3) and araldite mixture in such a way that the entire length of the rod is in complete contact of the stone and the bent ends are fully inserted in the cracked stone. Use 316 grade stainless steel charges per hole. Steel rod charges are counted per kg. Holes with 6mm, 8mm, 10mm or 12mm dia.as per requirement of position as directed by Engineer-in- Charge
153
-
-
... More
Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diameter (20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-In-Charge. (Chemical for grout will be paid separately)
782
-
-
... More
Providing and grouting pre-packed ready to use grout made up of natural hydraulic lime with the addition of natural pozzolona filler, specially designed for use in restoration of old brick/stone masonry. The grout material shall have low (less than 1.5%) water soluble salt content, Elastic modulus not less than 5 Gpa and minimum compressive strength of 18 N/sqmm at 28 days. Mix the product by introducing 3/4 of the required water (which is 7-8 litres of 25 kg or as per manufactures specification) into the mixer. Add continuously the product and the remaining water until perfect mixer having a fluid consistency is achieved. Inject the same with gravity or mechanized equipment with pressure not more than 2 kg/sqcm as per site conditions by means of injection technique. The item shall include all cost of materials, machinery and labour etc. complete in all respect. (The payment shall be made on the basis of actual weight of approved grout injected into the cracks /voids as directed by Engineer-in- Charge:
6256
-
-
... More
Providing and fixing high tensile 316 grade 8/12 mm dia stainless steel helical bars conforming to BS EN 845-1: 2013 or equivalent international code ,fixing in dry condition across the wall junctions or across the buttresses through stone/brick masonry matrix from external side at specified interval upto the depth of 1.35m. Minimum ultimate tensile strength shall be 1000 N/sqmm and minimum tensile load capacity of 30 KN. Drill 8/12 mm pilot holes to a depth at least 15 mm longer than length of the tie; use 10 mm bit for hard masonry. Insert driving shank of the tie into SDS tool and hammer home using a light to medium-weight SDS drill. Patch pilot hole with colour matched mortar all as per manufactures specification including The rate includes making pilot hole of 8 mm dia upto required depth , driving the bars and finishing the head with matching mortar complete as per manufacturers specifications complete in all respect as per instructions of Engineer In-charge.
1008
-
-
... More
Providing and fixing stainless steel clamps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 lime: 2 coarse sand/surkhi), including making the necessary chases in stone and holes in walls wherever required.
2220
-
-
... More
Reinforcement Cleaning: Cleaning reinforcement of total rust by tapping or using wire brush or any other suitable way including from behind and around the reinforcement bars to give it a totally rust free finished steel surface as directed by Engineer-in- Charge:
14
-
-
... More
Removing existing corrosion of existing rolled steel sections by means of suitable light tapping, mechanical grinder, wire brushing mechanically, washing and drying exposed surfaces. (Measurement shall be given for exposed surface area of rolled steel section) as directed by Engineer-in- Charge:
104
-
-
... More
Single Part PMM Treatment: Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) for 50 mm average thickness in 3 layers as per specifications and directions of Engineer-in-charge. Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).
14
-
-
... More
Polymer Bond Coat: Mixing and applying Acrylic polymer modified cementitious bonding coat, on prepared non-metallic / cleaned concrete surface of parent material with specified proportion of polymer to weight of cement as per specification etc. complete.
14
-
-
... More
Providing TMT Bar FE 500 reinforcement for R.C.C work including bending, binding and placing in position complete. ( Upto 10 ton)
11116
-
-
... More
Providing anticorrosive treatment to HYSD bars with FUSION BONDED EPOXY COATING (FBEC) confirming to IS13620:1993 at approved plant including testing of coating as per relevant IS, before bringing the coated bars on site including To & Fro transportation of bars for sending at plant site etc. complete, for HYSD bars : (B) Above 12 mm and upto (and including) 20 mm dia (The rate should be including working in tidal conditions)
11.12
-
-
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
942
-
-
... More
Providing and fixing or replacing 100x75 mm Indian teak wood hand rail including bend and french polishing complete.
31.4
-
-
... More
Providing and fixing 35 mm thick teak planks in treads over RCC base with glue/adhesive and making nosing including French polishing complete.
1
-
-
... More
Coursed rubble masonry with hard stone of approved quality in foundations and plinth in cement mortar 1:6 (1-cement : 6-coarse sand) etc., complete (upto 10 ton)
31
-
-
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with cement mortar 1:6 (1 cement : 6 coarse sand)
15
-
-
... More
Plastic / mortar Repairs (in ornamental / decorative work in stone or raised stucco motifs / ornamental features, like figurative forms urns, cornices, mouldings, finials etc ) using lime based mortars that is compatible with the host substrate (to provide an effective bond) shall be used. Profiled plastic repair for retention of carved enrichments using anchoring armatures of non-ferrous metals / any other as existing in host substrate and color matching using traditional techniques etc in (1:1 / 1:2) 10% pozzolonic lime mortar, with additives etc complete.
The repair to be done skilled manner by experienced craftsmen to avoid adjacent areas and include scrapping loose parts using soft brushes, cleaning, washing & applying patching compound, curing etc. complete as directed by the Engineer-in-Charge.
.
10
-
-
... More
Providing patch repair of eroded/cracked faces and edges of the various stone components of stone parapet wall including scrapping loose part using soft brushes, cleaning, washing & applying patching compound in lime mortar 1:2 , to match in true shape, size , texture , and colour as that of original, using matching stone dust of recommended mesh size of same type of natural stone, carefully and in a skilled manner to avoid damage to the adjoining areas of the component, cleaning, washing, curing etc. complete and in best workmanship including dressing of stones, grooving, jointing, making keys overlaps etc, and fixing with (1:2) 10% pozzolonic lime mortar, any anchoring required using SS/timber dowels wherever fixed with lime mortar (1:1), pointing with lime mortar etc complete as directed as directed by the Engineer-in-Charge.
100
-
-
... More
Providing and laying reinforced cement concrete 1:1½:3 (1 cement: 1½ coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) (M20) grade using OPC grade 43 minimum @ 400 kg/cum and graded stone aggregates 20 mm nominal maximum size in parapet wall (of any thickness) above plinth up to floor five level, including the cost of centering, shuttering and finishing, excluding the reinforcement as per design requirement.
7
-
-
... More
Providing and laying reinforced cement concrete work in staircases and spiral stair cases above plinth level up to floor five level, including the cost of centering, shuttering, finishing, excluding the reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). grade using OPC grade 43 minimum @ 400 kg/cum and graded stone aggregates 20 mm nominal maximum size as per the design requirement.
73
-
-
... More
Pani Bai School - Sub Head 04 - Civil Repairs
-
-
-
... More
Providing and fixing chicken wire mesh (6mm x 6mm) of 24 gauge 200 mm wide along the joints of brick work with hooks/nails etc. complete so as to receiving the plastering work over chicken mesh as per the direction of Engineer‐in‐charge direction of Engineer‐in‐charge.
720
-
-
... More
Lime plaster for Plain walls :
Providing and applying lime plaster (Plain walls) up to 25mm thick, 12mm thick base coat in prepared lime + river sand and 10mm thick second coat in Prepared Lime +silica, 3mm final coat in lime putty 1:2 (Lime +fine Sand) by fitting and raking the joints wherever required and preparing the surface adequately with proper adhesion using molasis preparation complete as per Engineer-in-Charge.
4900
-
-
... More
30 mm lime plaster in two coats on ARCHES, backing coat 20 mm thick with 1:2 (1 lime:2 surkhi) mortar and finishing coat 10 mm. thick 1:2(1lime:2sand)mortar on the rough side masonry wall for interior plastering upto floor two level including arises, internal rounded angles chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth.
62
-
-
... More
Lime punning - Description
Providing and finishing render coat of not more than 4mm thick to lime stone surface, both plain and decorative/ covered on the main façade, in Lime: quartzs fine sand (inclusive of colouring pigment as required) using white lime in 1:3 Rates are including modification factor and shall be paid on plan area
2822
-
-
... More
Application of High quality Wacker SMK 1311 water base water repellent solvent free silicon coating impregnating on all external wall, Mangalore tile roofing etc. surface. The dilution of water should be done in ratio of 1:14 (1 Wacker : 14 water). The dilution should be applied in 2 coats, wet on wet application to the surface. The application can be made through brush or spray. The application should be done with prior preparation of surface by cleaning o it form residue of any material, dusting it clean for application.
2253
-
-
... More
Raking out joints of stone masonry surface to the required width and depth, with due care and precaution, by mechanical / manual means, including preparing and cleaning the surface for re-pointing/ refilling of joints, including disposal of rubbish to the dumping ground in all lead and lift.
385
-
-
... More
Ruled / Flush pointing on stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One lime: 1.5 surkhi (50% red and 50% light yellow surkhi) : 1/2 marble dust}. (The rate is inclusive of all materials & labours involved except scaffolding).
385
-
-
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand)
425
-
-
... More
Anti-Carbonation Protective Coating Externally: Providing, and applying high build anti-carbonation coating in two coats (each coat 150 micron DFT) on acrylic based primer at an average thickness of 300 microns DFT in two coats including acrylic resin based primer as directed by EIC.
72
-
-
... More
Applying priming coat over new steel and other metal surface after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead.
72
-
-
... More
Finishing with Epoxy paint (two or more coats) on steel work at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete
72
-
-
... More
Providing and applying of Verona Vapour Permeable, water based Mature Lime wash finish of exterior grade used for conservation and restoration of historical building, formulated by Mature Lime Putty with fillers by OIKOS India, After the cleaning of surface and removing any loose or flaking material, applied two coat of Verona Mature Lime wash finish by OIKOS India on one coat of Lime Based primer by OIKOS India of approved color and shade to achieve desired finish excluding the cost of surface preparation and scaffolding, apply by brush, roller and appropriate tools, as per manufacturer’s specification, all completes with the direction of Engineer-in-Charge.
2253
-
-
... More
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size 250x400x20 mm or approved by EIC location- Morbi Gujarat/equivalent and as per approved pattern on wooden frame work complete (wooden frame work to be paid separately).
203
-
-
... More
White stone Bela masonry block in course in super structure with stone of approved quality in lime mortar 1:1.5 ( 1 lime : 1.5 Fine Sand) including packing the joints complete etc as per direction of Engineer-in-Charge.
14
-
-
... More
White stone Bela masonry block in course in super structure with stone of approved quality in lime mortar 1:6 ( 1 lime : 6 course Sand) including packing the joints complete etc. as per direction of Engineer-in-Charge.
29
-
-
... More
Pani Bai School - Sub Head 05 - Wood Work
-
-
-
... More
Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats)
1002
-
-
... More
Providing and applying two coats of fire retardant paint on cleaned wood / ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant.
1002
-
-
... More
Providing and painting two or more coat of oil based synthetic enamel paint to old or new doors, window and ventilators over one coat of primer and one coat of full putty made in same shade of enamel including thorough cleaning, and sand papering and sealing all cracks, crevices, dent, knot and holes with best quality of waterproof putty etc. complete on external face of wood shutters. Make: Asian, Berger
81.12
-
-
... More
Providing and applying in two or more coat of wood teak touch wood exterior grade Polish over old or new shutters of door, Window and ventilators after making the surface smooth with sand papering and sealing all cracks, crevices, dent, knot and holes with best quality of waterproof putty to give transparent shade etc. complete. Make: Asian paint/equivalent
81.12
-
-
... More
Providing and fixing new wooden beams in roofs with well-seasoned class A Indian teak wood (Nagpur teak, CP Teak, Valsadi or equivalent) including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete, including removal of rubbish to the dumping ground not exceeding 4.00 meters in length., all complete as per direction of Engineer-in-Charge.
3
-
-
... More
Providing and fixing new frames with class A Indian teak wood (Nagpur teak, CP teak, Valsadi teak or equivalent) well-seasoned, chemical treated Door/Window frames as per original design, size and pattern including necessary fixture, fastener and architrave( Moulding) along the frame etc complete.
1
-
-
... More
Providing and fixing or replacing damaged window shutters ( 30 mm thick) including 16 mm thick panelling with well-seasoned class A Indian teak wood ( Nagpur teak, CP Teak, Valsadi or equivalent) chemically treated Door/Window shutters as per original design, size and pattern etc. complete including with butt hinges.
41
-
-
... More
Providing labour and teak wood frame material for repair and restoring old TW door & window frame by carefully scraping, replacing, finishing the decayed parts/ members with equal size of fresh well-seasoned class A Indian teak equivalent to old BTC / CP members such that the original frame & adjacent building component does not get affected including all necessary fixtures, fasteners, adhesive and architrave etc. complete as per direction of Engineer-In-Charge.
(Only new teak wood part will be measured.)
4
-
-
... More
Providing and fixing or replacing damaged of Main door shutters including panelling with well-seasoned class A, BTC wood chemically treated door shutters as per original design, size and pattern including minor repair etc. complete as per direction of Engineer-In-Charge.
2.65
-
-
... More
Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters with additional 1 mm lamination on both face factory pressed including 200x200 mm 8 mm thick glass for visual effect and ISI marked brass butt hinges with necessary screws Complete as per direction of Engineer-In-Charge.
75.44
-
-
... More
Extra for Providing and fixing flush doors with decorative veneering On one side only instead of non-decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)
4
-
-
... More
Providing and fixing all heavy duty brass hardware for door and window shutters / frame in brass, including hinges, handles, tower bolts etc. Brass Aldrop (door) - 300x16x5 mm weighing not less than 0.380 kg
51
-
-
... More
Providing and fixing all heavy duty brass hardware for door and window shutters / frame in brass, including hinges, handles, tower bolts etc.
Extruded brass handle (door) - 200 mm long
51
-
-
... More
Providing and fixing all heavy duty brass hardware for door and window shutters / frame in brass, including hinges, handles, tower bolts etc.
Parliament Hinges with steel pins (door) - 125x125X27x5 mm
306
-
-
... More
Providing and fixing all heavy duty brass hardware for door and window shutters / frame in brass, including hinges, handles, tower bolts etc.
Brass barrel tower bolt (door) 200x10 mm and 150x10 mm
102
-
-
... More
Providing and fixing all heavy duty brass hardware for door and window shutters / frame in brass, including hinges, handles, tower bolts etc. Brass Stopper (door)
51
-
-
... More
Providing and fixing all heavy duty brass hardware for door and window shutters / frame in brass, including hinges, handles, tower bolts etc.
Extruded brass handle (window) - 125 mm
106
-
-
... More
Providing and fixing all heavy duty brass hardware for door and window shutters / frame in brass, including hinges, handles, tower bolts etc.
Casement stay (window) - 250 mm long
106
-
-
... More
Providing and fixing all heavy duty brass hardware for door and window shutters / frame in brass, including hinges, handles, tower bolts etc.
Brass barrel tower bolt (window) - 100 mm
106
-
-
... More
Providing and fixing the Plaque boards/Name boards representing the particular purpose of the rooms using 10-12 inch rectangular brass name plate of thickness 3-4 mm to the required doors or walls complete as specified by the Engineer-in-Charge.
20
-
-
... More
Providing and fixing old damaged , broken transparent glazing to door, window and ventilators shutter using 5.0 mm thick 'Modiguard' Float Glass / or of approved make (weight not less than 12.5 kg per sqm)
39
-
-
... More
Providing and fixing Well seasoned Indian teak wood full length new members like joists, rafters, purlins, etc. including all fixtures and fastenings with one coat of primer etc. complete. Item to include all mouldings and chamfers to be made as per original design indicated by the Architects, Item to include using a larger section of wood to get the mouldings and chamfers as per original design, sample to be shown to the Architect for approval before fixing. Item to also include application of solignum on the wooden surface.
21
-
-
... More
Providing and fixing the Fascia Patti/Eaves lace under roof tiles in a decorative manner made up of fibre cement which can last for all weather conditions designed based on the ultra-modern technologies prevailing in the industry as per approval of the Engineer-in-Charge.
71.6
-
-
... More
Pani Bai School - Sub Head 06 - Flooring
-
-
-
... More
Providing, laying and fixing the 14 mm thick engineered wood flooring (Merbau Bright) with 1-2 mm thick foam over floor finish as directed by the Engineer-in-Charge. complete. Make Pergo, Krono, Greenply
358
-
-
... More
30 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
358
-
-
... More
Providing and laying polished grey kota stone slab 25mm thick in risers of steps, skirting dedo and pillars laid on 10mm thick cement mortar 1:3 (1- cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete as per direction of Engineer-In-Charge.
584
-
-
... More
Providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slpe and to be tempered to bring mortar crème out upto surface using white cement including rounding of junctions and extending them upto 18 cm along the wall, clearing with water and oxalic acid etc. and as directed by Engineer-in-Charge.
454
-
-
... More
Providing and laying double charged Antiskid vitrified floor tiles in size of Tile 500x500 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete as directed by Engineer-in-Charge.
190
-
-
... More
Pani Bai School - Sub Head 07 - Terrace Waterproofing
-
-
-
... More
Providing and laying integral cement based brickbat coba water proofing treatment including preparation of surface With average thickness of 120 mm and minimum thickness at khurra as 65 mm as required for treatment of roofs, balconies, terraces etc consisting of following operations and furnishing a guarantee bond of 10 years: a) Applying a slurry coat of neat cement using 2.7 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approve by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick joint less cement mortar of mix 1:4 (1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
454
-
-
... More
Pani Bai School - Sub Head 08 - Rain Water System
-
-
-
... More
Providing and fixing 110 mm diameter single socketed pipes on wall face un-plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,.
45
-
-
... More
Providing, fixing and embedding sand cast iron rain water pipes in the masonry surrounded with 12mm thick cement mortar of the same mix as that of masonry (A) 75mm dia pipe
42
-
-
... More
Providing and fixing 150mm wide 450mm over all semi-circular plain G.I sheet class-3 gutter with iron brackets 40mm X 3mm size bolts, nuts, washers etc., including making necessary connection with rain water pipes. (i) 0.80mm thick sheet. (upto 10 ton)
11
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
7
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering.
10
-
-
... More
Providing and laying cement concrete of 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of form work in (A) foundation and plinth (uptp 10 ton)
38
-
-
... More
Providing and laying reinforced cement concrete 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) (M20) grade using OPC grade 43 minimum @ 400 kg/cum and graded stone aggregates 20 mm nominal maximum size in walls (of any thickness) up to plinth level, including the cost of centering, shuttering and finishing, excluding the reinforcement as per the design requirement and as directed by Engineer-in-Charge.
11
-
-
... More
Supplying of single phase pump set suitable for 100mm size or more dia bore well having motor capacity and discharge as under with necessary panel box motor 1.5 HP (12 stage) pump having capacity of 50 LPM at 43 to 45 mtr. Head suitable for 32mm dia. Delivery pipe. Cat. II
2
-
-
... More
Recharge pit layed with 50% Crushed stone aggregate for Hard Quality 40mm Size for filtration process along carriage of material upto 0.5 Km / over distance exceeding 0.5 Km including loading, unloading and stacking
4
-
-
... More
Recharge pit layed with 25% Crushed stone aggregate for Hard Quality 20mm Size for filtration process along carriage of material upto 0.5 Km / over distance exceeding 0.5 Km including loading, unloading and stacking
2
-
-
... More
Recharge pit layed with 15% Coarse sand for filtration process along carriage of material upto 0.5 Km / over distance exceeding 0.5 Km including loading, unloading and stacking
1.2
-
-
... More
Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm in foundation and plinth in cement mortar 1:6 (1-cement :6 - fine sand) (B) Conventional
0.61
-
-
... More
Providing 20mm thick cement plaster in single coat on single or half brick walls for interior / exterior plastering upto floor two level and finished even and smooth in (iii) cement mortar 1:6 (1-cement: 6-sand)
2.66
-
-
... More
Pani Bai School - Sub Head 09 - Anti-Termite Treatment
-
-
-
... More
Around periphery of building as per IS6313 by excavating trenches of 20cm width and and exposing side of masonry walls upto depth of 25cm and injecting 1% chloropyrifos or equivalent emulsion concentrate at the rate of 2.25 litters per meter and refiling the trench etc. complete. Extra care to be taken so as not to damage or disturb the original masonry walls while excavation or refilling.
185
-
-
... More
Providing Anti termite treatment to joints of timber sections of beams, joist, roof work, door, windows frame / shutters of the existing building as per IS 6313 by application on the surface (2coats) and letting it dry for period of 5 weeks and by drilling 6mm dia holes at four corner at downward direction at junction of wood and masonry work, injecting the anti-termite solution and sealing the hole with putty etc. complete and as directed by Engineer-in-Charge.
1858
-
-
... More
Pani Bai School - Sub Head 10 - Sewerage (Internal & External)
-
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 of size 100x100 mm complete with CI grating and brick masonry chamber of common burnt clay F.P.S. (non- modular bricks of class designation 7.5 with water tight RCC precast cover and frame of 300 x300 mm size (inside) complete.
13
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including precast RCC HD-20 cover with frame 455x610 mm internal dimensions with common burnt clay F.P.S. (non-modular bricks of class designation 7.5 complete as per drawing and directed by Engineer-In-Charge
2
-
-
... More
Providing and fixing to wall ceiling and floor 10 kgf/cm2 working pressure polythene pipes of the following outside dia. Low density, complete with special flange compression type fittings, wall clipsets, including making good the wall ceiling and floor (G) 110mm.
25
-
-
... More
Providing and fixing to wall ceiling and floor 10 kgf/cm2 working pressure polythene pipes of the following outside dia. Low density, complete with special flange compression type fittings, wall clip sets, including making good the wall ceiling and floor (G) 75mm.
35
-
-
... More
Providing and fixing on wall face un-plasticised - PVC moulded fittings/ accessories for 110 mm dia un-plasticised Rigid PVC drainage pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Coupler
4
-
-
... More
Providing and fixing on wall face un-plasticised - PVC moulded fittings/ accessories for 110 mm dia un-plasticised Rigid PVC drainage pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single tee with door
2
-
-
... More
Providing and fixing on wall face un-plasticised - PVC moulded fittings/ accessories for 110 mm dia un-plasticised Rigid PVC drainage pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5°
40
-
-
... More
Providing and fixing on wall face un-plasticised - PVC moulded fittings/ accessories for 110 mm dia un-plasticised Rigid PVC drainage pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Shoe (Plain)
1
-
-
... More
Providing and fixing on wall face un-plasticised - PVC moulded fittings/ accessories for 75 mm dia un-plasticised Rigid PVC drainage pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionCoupler
6
-
-
... More
Providing and fixing on wall face un-plasticised - PVC moulded fittings/ accessories for 75 mm dia un-plasticised Rigid PVC drainage pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionSingle tee with door
2
-
-
... More
Providing and fixing on wall face un-plasticised - PVC moulded fittings/ accessories for 75 mm dia un-plasticised Rigid PVC drainage pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionBend 87.5°
50
-
-
... More
Providing and fixing on wall face un-plasticised - PVC moulded fittings/ accessories for 75 mm dia un-plasticised Rigid PVC drainage pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionShoe (Plain)
1
-
-
... More
Providing and fixing 32 mm dia P.V.C Semi rigid waste pipe for sink or wash basin including P.V.C. waste fittings complete
22
-
-
... More
Supply and fixing of PVC floor trap & height riser fitting wherever necessary. PVC floor trap shall be multi-inlet & single outlet type. The floor trap be provided with 150 x 150 mm square stainless steel grating of 4 to 5 mm thick and rim of approved design by architect or Engineer (Floor Trap for Shower, & WB area for toilets attached to Rooms, sinks)
22
-
-
... More
Providing and fixing in position cowel vent to pipes ( C) 100mm dia
4
-
-
... More
Pani Bai School - Sub Head - 11 - Water Supply (Internal & External)
-
-
-
... More
Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5) pipe having national sanitation foundation (NSF) seal for potable water of following dia. Nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete (C) 25 mm and as directed by Engineer-in-Charge.
20
-
-
... More
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) pipe having national sanitation foundation (NSF) seal for potable water of following dia. Nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc., complete (C) 32 mm and as directed by Engineer-in-Charge.
110
-
-
... More
Providing and fixing 25 mm nominal bore horizontal gun metal non- return valve of approved quality (screwed end)
2
-
-
... More
Providing and fixing 32 mm nominal bore horizontal gun metal non- return valve of approved quality (screwed end)
2
-
-
... More
Providing and fixing 510x1040 mm bowl depth 225 mm Kitchen sink with drain board - Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required
2
-
-
... More
Providing and fixing 15 mm CP Pillar cock auto closing system prismatic basin tap and as per the requirement of contractor approved by the Engineer-in-Charge.
12
-
-
... More
Providing and fixing Gun metal check or non-return full way wheel valve (B) 20mm dia
5
-
-
... More
Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately and as directed by Engineer-in-Charge.
2500
-
-
... More
Pani Bai School - Sub Head - 12 - Internal Sanitary Fixture
-
-
-
... More
Providing and fixing wall hung water closet (Constellation model) Size: 79 x 37 x 69 cm Cat. No.: 20028 (P-15.5) including cistern with model no Cist. 21038, all pastel colour complete with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required and as per the requirement of contractor approved by the Engineer-in-Charge.
8
-
-
... More
Providing and fixing G.I inlet connection for flush pipe with W.C pan
8
-
-
... More
Supply of Health Faucet with 120 cm PVC Flexible Tubes & ABS Wall Hook, Bib Cock 2 in 1 with Wall Flange and Angle Cock (Project) with wall flange provided with necessary fittings as per the requirement of contractor approved by the Engineer-in-Charge.
8
-
-
... More
Providing and fixing washbasin with single hole for pillar tap (Magna) Size: 63 x 50 cm Cat. No.: 10079 pastel colour excluding granite counter of suitable size complete and as per as per the requirement and approved by the Engineer-in-Charge.
8
-
-
... More
Providing and fixing polished granite stone slab of size 120x60 cm deep and 1.8 cm thick, fixed for counter of washbasin by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per as per the requirement and approved by the Engineer-in-Charge. and finished smooth
8
-
-
... More
Providing and fixing 32mm dia C.P brass waste for wash basin or sink
8
-
-
... More
Providing and fixing 15 mm nominal dia CP Brass Single lever telephonic wall mixer with wall flange of quality & make as approved by Engineer-in-Charge.
2
-
-
... More
Providing and fixing CP brass angle valve with wall flange and as per as per the requirement and approved by the Engineer-in-Charge.
28
-
-
... More
Providing and fixing push type CP brass angle valve( model PRS-077) with wall flange for urinal
8
-
-
... More
Providing and fixing CP brass sink mixer with wall flange wall mounted.
2
-
-
... More
Supply and fixing of Urinal of size 37.5 x 39 x 59 cm, Cat. No.: 60002 in pastel colour including CP waste, coupler and bottle trap and flush bend and making good the wall complete.
8
-
-
... More
Providing and fixing marble stone slab with table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth
8
-
-
... More
Providing and fixing C.P brass toilet paper holder
8
-
-
... More
Supply of Grab bar , wall mounted safety arm rest for handicapped, made of stainless steel profiled tube with multifunctional, ergonomic grip area, anti-slip profile, and two extruded fastening flanges with two holes each, made of stainless steel 32 mm diameter, 3 mm thick, with plastic collar, including fastening set as per drawings, specifications & to the approval of the Architect/Engineer. Execution selectable right-hand or left-hand.
8
-
-
... More
Providing and fixing 600mm X 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixing to wooden plunge with C.P brass screws and washers.
4
-
-
... More
Pani Bai School - Sub Head - 13 - Landscaping
-
-
-
... More
Cleaning of earth and back filling with 150mm of garden soil with 25 mm of farmyard manure, mixing and levelling it as per required slopes. Grassing with dibbling method with the distance of 50x50mm, application of required pesticides and chemical fertiliser and maintaining it properly and weed free for 3 year.
700
-
-
... More
Providing and Planting of Bougainvillea glabra including with including cost of the plant, excavation of 0.3x0.3x0.3 m pit, back filling with garden soil and farmyard manure (3:1 ratio), application of required pesticides for anti-termite treatment. Planting of 0.6 m height healthy saplings with required stacking and maintaining it for 3 year. (which is well drained soil specific, should be fully exposed to sun can be used for garden decorative purpose complete)
20
-
-
... More
Providing and Planting of Plumeria Alba including with including cost of the plant, excavation of 0.3x0.3x0.3 m pit, back filling with garden soil and farmyard manure (3:1 ratio), application of required pesticides for anti-termite treatment.
(which is loamy and clay soil specific, well-watered & fast growth in nature, available in size of 7 feet height and can be used for garden decorative purpose complete)
6
-
-
... More
Providing and laying gang saw cut 18 mm thick, river washed machine cut granite stone of area less than 0.50 sqm and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.
132.25
-
-
... More
Providing and laying Paver Cobble Rajula Stones 75 mm thickness ( of 10x10,14x14 or 20x14 cm) sizes as per design over 1:3 cement mortar (1 cement : 3 graded medium coarse sand) bedding of average 50mm thickness, floated with thick and neat cement paste with consumption of cement @4.4kg/ sqm and 2 kg /sqm for joints mixed with approved pigment to match the shade of the stone including dressing, rubbing, curing, rounded edges, wedge, tapering, cleaning etc. complete with no more than 15mm floor top level variation (the rate shall be for different patterns and details provided by the Architect. No extra amount will be paid for residues to be used to achieve the pattern). All sides of stone to be 25mm deep machine cut to achieve best edge quality and as design.
261.27
-
-
... More
Providing and laying at or near ground level Rajula kerb stone of size 600X300X150 mm in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves as per approved pattern and setting in position complete etc. as per direction of Engineer-in-charge
0.9
-
-
... More
Pani Bai School - Sub Head - 14 - Firefighting
-
-
-
... More
Booster Pump :
Installation, testing & commissioning of ELECTRIC MOTOR DRIVEN, horizontal split casing, centrifugal fire duty operation pump,(with mechanical seal, bronze impeller & carbon steel EN-8shaft)capable for a DISCHARGE of 900 L.P.M. at A HEADof35MTRs.with 12.5HP, coupled through flexible coupling (l e coupling guard) with totally enclosed squirrel cage 4 pole induction motor suitable for operation on three phase AC supply of 415+or- 10% volts, 50 HZ, fixing the couple pump and motor on a common structural base frame, the complete pump-motor set on the making a suitable cement concrete foundation and mounting foundation using suitable numbers of anti-vibration mounting and as per the detailed specifications
1
-
-
... More
Booster Pump And Control Panels :
Control Panel suitable for DOL Starling for the terrace Pump set potential free contacts for 1BMS alteration as mentioned in the specifications etc.
1
-
-
... More
Electrical Works- SLFTC Of Conductor Cable :
Supply, laying, fixing, end termination, testing and commissioning of following sizes of PVC Insulated PVC sheathed armoured 3 Core x 10 Sq. mm aluminium conductor cable of 1.1 KV grade on existing cable tray/surface as required.
100
-
-
... More
Electrical Works- SLFTC of conductor cable
Supply, laying, fixing, end termination, testing and commissioning of following sizes of PVC Insulated PVC sheathed armoured 2 Core x 1.5 Sq. mm aluminium conductor cable of 1.1 KV grade on existing cable tray/surface as required.
100
-
-
... More
PIPING AND ACCESSORIES- SLFTC of GI pipes on surface :
Supplying, laying, fixing and commissioning of 100mm DIA (NB) of ISI marked C- class GI pipes including cutting, threading, wielding etc. and providing all fittings e.g. elbows, reducers, clamps hangers, flanges, gaskets, nuts, bolts, and washers etc. including painting of pipes and fitting with red paint over a coast of ready mixed primer, both of approved quality complete in all respect as required. Make: TATA/JINDAL
150
-
-
... More
PIPING AND ACCESSORIES- SLFTC of GI pipes on surface :
Supplying, laying, fixing and commissioning of 80mm DIA (NB) of ISI marked C- class GI pipes including cutting, threading, wielding etc. and providing all fittings e.g. elbows, reducers, clamps hangers, flanges, gaskets, nuts, bolts, and washers etc. including painting of pipes and fitting with red paint over a coast of ready mixed primer, both of approved quality complete in all respect as required. Make: TATA/JINDAL
30
-
-
... More
SITC of butterfly valves : Supplying, laying, fixing, testing and commissioning of butterfly valves of PN 1.6 rating of 100mm dia with nitrile seat and stainless stell stem with lever/gear operation and cast iron body in powder coated finish for firefighting application complete in all respects as required
3
-
-
... More
SITC of butterfly valves :
Supplying, laying, fixing, testing and commissioning of butterfly valves of PN 1.6 rating of 80mm dia with nitrile seat and stainless steel stem with lever/gear operation and cast iron body in powder coated finish for firefighting application complete in all respects as required
2
-
-
... More
SITC of cast Iron flanged Non returns valves :
Supplying, laying, fixing, testing and commissioning of cast iron and flanged Non return valves of PN 106 rating of 100mm dia conforming to relevant IS specifications and providing and fixing nuts, washers, gaskets etc. complete as required
1
-
-
... More
SITC of Brass Ball Valves : Supplying, laying, fixing, testing and commissioning of 25mm dia forged brass ball valves with brass body nickel coated, brass ball, hard chrome plated, suitable for firefighting complete in all respects
8
-
-
... More
SITC of Pressure Switches : Supplying, Installation, Testing and Commissioning of pressure switches suitable for operating with fire hydrant systems for working pressure of 14.0 kg/cm2 Including electrical control wiring with suitable copper conductor PVC Insulated and sheathed control cable upto control panel, connections etc. complete as required.
1
-
-
... More
SITC of pressure gauge :
Supplying, laying, fixing, testing and commissioning of 100mm dia Bourden type, Stainless steel dial type pressure gauge including brass isolation valve and pipe having calibration of 0-16 Kg/cm2
3
-
-
... More
SITC Two way fire brigade Inlet : Supply, Installation, Testing and commissioning of instantaneous two way fire brigade inlet connection conforming to relevant IS amended up to date consisting of 63 mm Gun metal Quadra plate, male inlet coupling with plug& cap, chain bends and other accessories etc. complete as required.
1
-
-
... More
SITC Fire hose : Supply, Installation, Testing and Commissioning 100% synthetic flax canvas Non-percolating FIRE hose (Type B) ISI marked 63mm dia 25m long with stainless steel male& female couplings (ISI marked) bound & riveted to hose pipes with copper rivets and copper wire as required.
4
-
-
... More
SITC Short branch pipe : Supply, installation, testing and commissioning gun metal 63mm dia. Short brach pipe (ISI Marked) with 20 mm dia nozzle as required
4
-
-
... More
SITC landing Valve :
Supply, installation, testing and commission of single headed gun metal ISI marked oblique pattern landing valve Type ‘A’ with 80mm dia flanged inlet & 63 mm dia instantaneous type female outlet complete with A.B.S plastic cap and chain twist release type lug and all accessories complete as required
4
-
-
... More
SITC Fire- Aid-Fire Hose reel : Supply, Installation, testing and commissioning of First-Aid –dire. Hose reel wall mounting swing type complete with drum, bracket, 20 mm dia, 30m long high pressure hose reel tub+ B82ng with gunmetal shutoff nozzle conforming to IS: 8090-1976 the hose reel shall be as per IS:885-1985
4
-
-
... More
SITC weather proof cabinet for hose :
Supply, Installation, and commissioning of weather proof single door cabinet for hose fabricated out of 1.6mm thickness M.S. sheet complete with glass in front having locking arrangement, suitable to accommodate all the necessary pipes, accessories, fitting etc. including sign writing etc.
4
-
-
... More
SITC of Air Release Valve : Supplying, laying, fixing, testing and commissioning of 25mm dia Air Release Valves with brass body nickel coated suitable for firefighting complete in all respects.
3
-
-
... More
SITC of Fire Alarm Panel- Conventional System : :
Supply, installation, testing and commissioning of Fire Alarm System - 4 Zone conventional Micro Processor Based Main Fire Alarm Control Panel with power supply, battery backup 2 x 12 V DC, 15 AH Set.
1
-
-
... More
SITC of Fire Alarm Panel- Conventional System : :
Supply, Installation, testing and commissioning of Manual Call Points
6
-
-
... More
SITC of Fire Alarm Panel- Conventional System : :
Supply, Installation, testing and commissioning of hooters
6
-
-
... More
SITC of Fire Alarm Panel- Conventional System : :
Supply and laying of 2 C x 1.5 sq.mm flexible FRLS Multi stand cable including accessories
250
-
-
... More
Fire Extinguishers :
Supply, installation of Co2 (Carbon Dioxide) 4.5kg Capacity Fire Extinguishers
4
-
-
... More
Fire Extinguishers :
Supply, installation of ABC (stored Pressure Type) 6 kg Capacity Fire Extinguishers
26
-
-
... More
Fire Extinguishers :
Fire Buckets Stand Set (4 Buckets)
4
-
-
... More
Transportation Charges for Fire Fighting
1
-
-
... More
Pani Bai School - Sub Head - 15 - Electrification
-
-
-
... More
LED Tube Lights (TL-20Watt) :
Stout Plus LED is a complete range of housing LED battens to replace traditional T8 battens (600mm &1200mm). The range is perfect for lighting large areas such as corridors, warehouses & general purpose spaces.
HAVELLS make lights having the model number STOUTPLUS600BS20WLED840SPCWH with HSN code of 9405 with the wattage of 20W Fixture size in mm (LxWxH) 605x66x76 for 20 W
Stout Plus LED is a complete range of industrial LED battens to replace traditional T8 battens (600mm & 1200mm). The range is perfect for lighting large areas such as corridors, warehouses & general purpose spaces.
71
-
-
... More
Outdoor wall mounted-12W :
LED Luminaire made of die cast aluminium with non-corrosive SS fasteners Non yellowing UV stabilized polycarbonate translucent diffuser Silicone gasket ,Cable entries for through-wiring of mains supply cable (max. 3 x0.5 Sqmm) , Integral power supply, Earth connection, Safety class ,IProtection class IP54 ,Conformity mark ,Suitable for operation on 240V, 50Hz single phase ac supply ID:5633,Dimension : Ø271 x 71 mm ,LED FITTING HSN CODE- 94054090
227
-
-
... More
K-Lite [ID No: KL-2875 ] Pendant Luminaires SONA 18W LED WW :
Luminaire made of spun aluminium for better thermal management. UV stabilized translucent acrylic diffuser for excellent diffused lighting experience throughout the life of the fixture. Designed for mounting on ceiling with stainless steel suspension kit (1meter) Cable entries for through-wiring of mains supply cable. Protection class IP20, Prewired with constant current LED driver and suitable for operation on 240V, 50Hz single phase ac supply. Dimension: Ø410 x 115 mm
43
-
-
... More
Photon ultra LED tube Light (single sideConnection)-13WHAVELLS make ultra-bright led polycarbonate tube light with very high efficacy suited for installation in existing t8 fitting with G13 lamp holders. The range is perfect for lighting large areas such as corridors, warehouses & general purposespaces PHotonultra1213t8sstl13Wled865sPC,current of 0.10A,HSN code 9405
20
-
-
... More
3678-PROXIMA 20W , TI 65mmX135mmX200mm,colour-white/black, at 12/24/36 degrees,7803 -1 Meter 2 Wire Track,7807 - I connector,7814 - L connector,7819 - t connector,7824 - + connector
9
-
-
... More
Spike lights :K-Lite [ID No:KL-4272 ] OLIVIA MIDI- BRACKET 12W LED WW ,[Dim :108 x Ø95 x124 mm ,LED FITTING HSN CODE-94054090 KL-8184 2WAY CONNECTOR IP67LEDPOLEFITTING HSN CODE- 94054090
4
-
-
... More
Globe Lights :K-Lite [ID No: KL-5076] ROMAN ROUND MIDI E27 Holder, Dimension: D1 Ø250 x 385 mm, HSN CODE-94054090 ADD LAMP 9W LED E27 94051090
2
-
-
... More
GLAZE – 1200 mm sweep – HAVELLS (Pearl White Copper) :
Finish : Superior Paint Finish, Design and Finish : Metalized body ring and trims for superior finish, Performance : HPLV motor for superior air delivery even at a low voltage of 180 volts, Metalized body ring and trim for superior finish, Decorative Trims On Blades For Superior Finish, power consumption 73W,rated voltage 240V, dimensions 34 × 35 × 15 cm, colours Pearl Ivory Gold, Sapphire Blue Chrome, Pearl White Coppe
16
-
-
... More
Matthews KC-TB, Kaye Textured Bronze 13":
DIMENSIONS: 17.5" from Wall / Ceiling to End of Fan Head, Mount is 5.5" Diameter; Weight10.5lbsFANBLADES:Includes Three Textured Bronze Blades - (13" Span / 31° Blade Pitch) 1302.65CFM-HighCONTROL: AT-ME-WC - Three-Speed Fan Wall Control with 90° Oscillation from ControlETL Listed Damp Locations; MATERIALS: Cast Aluminium and Heavy Stamped Steel, FINISH: TexturedBronzeWallControl Included, Optional Remote Sold Separately,Part Number: AT-RC-AC-WALLSPECIAL DETAILS: Ideal for small spaces or in front of HVAC ducts to make the heating or cooling of any room more efficient
15
-
-
... More
1.5 TON 5 Star Split Air-Conditioners : Providing and erecting approved make split air-conditioning unit consisting of condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of proper insulated copper tubing up to 5 RMT suitable for (Cost includes M.S. Stand, Gas Charging & Internal Copper Wiring & Remote Control)
6
-
-
... More
16-Way power distribution Board :
TPN DB [8537] IK 08-for single door DBs, IK 09-for double door DB DB’s Available in CRCA sheet steel, RAL 9003, powder coated Ready to use DBs - Provided with 100A insulated phase bus-bars | neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cable ties | blanking plates and circuit identification labels with provision for FP MCB/Isolator/RCCB/RCBO as incomer and SP MCBs as outgoings, cat no DBTPN016DD,incoming 8 and outgoing 16+16+16.
2
-
-
... More
2 runs of 1C X 1.5sq.mm PVC copper Wire (PVC / XLPE ARMOURED Cables with COPPER Conductor 1100 V. Grade confirming to IS : 7098 (Pt-1) 1988)Supply and laying of POLYCAB' P.V.C. insulated unsheathed bright annealed bare copper conductor single core industrial cables & PVC insulated, PVC round sheathed multicore industrial Cables for voltage grade upto 1100 V. as per IS 694:1990..
200
-
-
... More
For Earthing & Source for the room from Nearest DB :1C X 2.5sq.mm PVC copper Wire:
(PVC / XLPE ARMOURED Cables with COPPER Conductor 1100 V. Grade confirming to IS : 7098 (Pt-1) 1988)Supply and laying of POLYCAB' P.V.C. insulated unsheathed bright annealed bare copper conductor single core industrial cables & PVC insulated, PVC round sheathed multicore industrial Cables for voltage grade upto 1100 V. as per IS 694:1990..
200
-
-
... More
2 runs of 1C X4 sq.mm PVC copper Wire (PVC / XLPE ARMOURED Cables with COPPER Conductor 1100 V. Grade confirming to IS : 7098 (Pt-1) 1988)Supply and laying of POLYCAB' P.V.C. insulated unsheathed bright annealed bare copper conductor single core industrial cables & PVC insulated, PVC round sheathed multicore industrial Cables for voltage grade upto 1100 V. as per IS 694:1990..
200
-
-
... More
Dimensions of Round Conduit PVC Pipes IS : 9537 Part 3
Supply of pvc conduit pipes outside diameter of half inch for the 1Core 1.5sqmm cable passes through the wall of the walkway .Make -Precision pipes
500
-
-
... More
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi-strand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ceiling complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D Connector as directed. (a) With medium class Rigid PVC pipe and accessories. Cat-III
110
-
-
... More
Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi-strand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling, complete with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC box covered with 3 mm thick PC (Polycarbonate) / Acrylic sheet for open / concealed wiring with necessary Lamp holder / ceiling rose / H.D. Connector as directed. Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point. (a) with medium class Rigid PVC pipe and accessories
260
-
-
... More
Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi-strand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling complete with 6A Modular type switches and following type of accessories erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling as per pipe erected with necessary batten/angle holder or ceiling rose or H.D. Connector as directed with medium class Rigid PVC pipe and accessories Cat. III
17
-
-
... More
Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi-strand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected with necessary ceiling rose / H.D. Connector as directed with medium class Rigid PVC pipe and accessories Cat. III
31
-
-
... More
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi-strand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. i) For 16A Plug with 2-2.5 sq.mm Cu. Wire.(a) with medium class Rigid PVC pipe and accessories. Cat-III i) For 16A Plug with 2-2.5 sq.mm Cu. Wire.
27
-
-
... More
[II] For 6A Plug with 2-1.5 sq.mm Cu. Wire. (a) with medium class Rigid PVC pipe and accessories. Cat-III
42
-
-
... More
Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. (a) with medium class Rigid PVC pipe and accessories. (B) 2 wire 2.5 sq. Mm
500
-
-
... More
[C] G.I. Junction cross over box for metal / Al. trunking with duct entry 25mm x 38mm size having epoxy powder coated trap lead with corrosion & rust free having load bearingcapacity of 3.6 TONS with adjustable levelling screw of following size. [2] 250mm x 250mm x 60/75 mm depth
1
-
-
... More
Supplying & erecting in earth pit of minimum bore dia. 225mm size ASH or approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I. Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C. Plant & Sensitive Computer System(like Automation, SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft Rock, Marshy Soil etc..
-Length of Pipe: 3 Mtrs. -Back filling Compound :2 nos Bags of 25 Kg.
2
-
-
... More
Supply and Installation of 32 channel Tribrid HD IP without Remote
1
-
-
... More
Supply of Bullet Camera 2MP HD IP 30 MTR
28
-
-
... More
Supply of Bullet Camera 2MP HD IP 50 MTR
2
-
-
... More
Camera Installation Charges
30
-
-
... More
Supply and installation of 18.5 Inch Screen LED
1
-
-
... More
Supply and Installation of 4U Network Rack
3
-
-
... More
Supply and Installation of Junction Box IP 65
3
-
-
... More
Supply and installation of 4+1 ch POE Switch Unit
4
-
-
... More
Supply of Fibre Cable (Approx. Cable)
500
-
-
... More
fibre Cable Laying and Installation Charges
500
-
-
... More
Supply and Installation of 4 TB Hard disk surveillance
4
-
-
... More
Supply of Armoured Cat6 Network Cable (Approx. Cable)
1500
-
-
... More
Cable Laying Charges (Cat6)
1500
-
-
... More
fibre Accessories and Splicing charges
4
-
-
... More
Supply and Installation of Fiber Media Convertor
8
-
-
... More
Supply and fixing of Camera Connectors
30
-
-
... More
LINEATE 12W DMX 30X65⁰ (Illumination of Façade Front Elevation Wall Graze Lighting) Havells Make Lineate LINEATE 24W DMX 30X65⁰ , lumens 1320 lumens ,RGB type lights it has a separate replicable electronic driver, working hours of 70000 hours ,operating temperature of -35 deg to +50deg ,it can be mounted by both as surface mounted and inclination ,its body is aluminium extrusion and toughened glass and colour is RAL 7040 body colour
10
-
-
... More
M16 Female Supply Cable 1 Mtr 2 Pin
5
-
-
... More
M16 Extension Cable 1 Mtr 2 Pin
7
-
-
... More
M16 Extension Cable 5 Mtr 2 Pin
12
-
-
... More
LEDDRIVERCV150W24V6.3AEBV150S024SV
3
-
-
... More
3 PIN T -Type Plug Socket Connector IP67
10
-
-
... More
3 Pin Socket Connector IP67
10
-
-
... More
COMPASS LED MODULE 30W 40° 3000K (Illumination of Façade Front Elevation Upper Columns Lighting) Havells make COMPASS LED MODULE 30W 40° 3000K
LED : 70,000 hours
Operating temperature : -35⁰C to +50⁰C
Mounting: Surface mounting + Inclination +Rotation* (RANGER series)
Material : aluminium die cast body +toughened glass
Colour: RAL 7040 Body Colour (RANGER) / RAL 9023* (COMPASS series),lumens 1612 lumens .Including LED DRIVER DC34V/800mA / EUC-035S105STM (Driver for Compass)- (LSSLOS0158)
4
-
-
... More
3 PIN T -TYPE PLUG SOCKET CONNECTOR IP67 (LSSLOB0217)
4
-
-
... More
3 PIN PLUG SOCKET CONNECTOR IP67 (LSSLOB0218)
4
-
-
... More
CLIO 15W 3000K 40° (Illumination of Façade Front Elevation Columns up and down Lighting) ,Product code - CLIOLL15WLED730PSYMTOTG 9405
20
-
-
... More
LYCUS 9W 3000k 40° (Illumination of Façade Front Elevation Entrance Lighting), product code LYCUSLL9WLED730PSYMTOTG 9405
4
-
-
... More
DMX + ACCESSORIES (1 set ): DMX Controller (UE7 )
1
-
-
... More
Address writer
1
-
-
... More
IP Box for DMX Controller
1
-
-
... More
Instruction Forwarder Ranger/Compass(AC)
3
-
-
... More
Instruction Forwarder Lineate (DC)
5
-
-
... More
Amplifier Driver IP67 24V 18W(LPH–18–24)
3
-
-
... More
2 Pin Plug Socket JRL IP Connector IP67
3
-
-
... More
Programming and Commissioning (1 Job)
1
-
-
... More
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed. (b) 32 mm
500
-
-
... More
supply of 3core 0.75sqmm flexible copper cable for the façade lighting of exterior lighting, code is WHMFDSKB3X75 ,HSN CODE: 8544
500
-
-
... More
St. Thomas Church - Sub Head 16 - Preparatory Work
-
-
-
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. External façade (attached adjoining hotel part is also considered presently as it will stand out if not attended along with Church external facade
2500
-
-
... More
Providing and fixing scaffolding for Inside the Church area up to dome soffit of Nave and Altar area center to center, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.
3590
-
-
... More
Provision for providing and fixing Bamboo scaffolding wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.
60
-
-
... More
Propping and supporting the structural elements and its adjoining areas with tubular steel props (adjustable or as required), bracings, steel runners etc. to relieve the structural member of the required load coming over it as per the pattern given by the contractor - Providing and fixing of tubular Steel prop of up to 4 MT capacity and up to 3.2 m heights as per directions of Engineer-in-Charge.
50
-
-
... More
Propping and supporting the structural elements and its adjoining areas with tubular steel props (adjustable or as required), bracings, steel and wooden runners etc. to relieve the structural member of the required load coming over it as per the pattern given by the contractor - Providing and fixing of adjustable span ESO+SI (2.35-3.40) as per directions of Engineer-in-Charge.
3
-
-
... More
Providing and erecting temporary Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete (Using fabricated steel trestles and steel joists etc. upto any heights including fabrication, erection and dismantling the same complete.
3162.5
-
-
... More
Dismantling steel work including segregating and stacking the materials with all lead and lift
3162.5
-
-
... More
St. Thomas Church - Sub Head 17- Dismantling and Demolishing Work
-
-
-
... More
Shifting of Artifacts - General considerations + A special consultant (curator) to be consulted for detail specs and management - Artifacts are Very Important Museum pieces, Shall be handled by expert curator only.
- Packing of artifacts shall be done so as not to damage any component or piece.
- Travelling of artifacts shall be done so as not to damage any component or piece.
- Re Locating of this artifact shall be in consents of the Church Authorities.
92
-
-
... More
Removing and scraping of old deteriorated plaster of any thickness from wall / RCC member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift.
4037
-
-
... More
Dismantling of AC sheet roofing including ridges, hips, valleys, gutters etc., stacking of serviceable materials and disposal of unserviceable materials with all lead and lift. sheet roofing
118
-
-
... More
Dismantling of Mangalore tile roofing with battens boarding etc. including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.
20
-
-
... More
Demolition of Cement concrete and disposal of unserviceable materials with all lead and lift.
128
-
-
... More
Demolition of Brick work and stone masonry done in lime mortar including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift mortar.
976
-
-
... More
Dismantling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift. (i) Exceeding 3 Sq.m in area.
7
-
-
... More
Dismantling Aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in all lead and lift as directed by Engineer-in-charge
51
-
-
... More
Manually removal of vegetation (major trees, climbing plants, creepers) from roof slab, roof vault, walls, columns, arches, floor etc in a skilled and careful manner, using appropriate tools and means and without causing any damage to the adjoining parts, including carrying and stacking the dismantled materials including lift/lower upto roof vault, mintages, terrace etc, as directed by the engineer or architect in charge. The exposed surfaces will be coated with a paste made from ammonium sulphamate crystals or with "Tree killer" available in market. In this condition the root system may be left to absorb and die. Large sections of dead wood must not be left within the core. As they decay they will remove support and create voids and weaknesses in the wall. Pull off a well‐established mat of vegetation must be resisted. LIME based mortor will be used for Tamping, grouting, pointing, plastic repairs and resetting of brick / stones after removal of vegetation, must all be anticipated as remedial work
150
-
-
... More
Dismantling tile of stone floors laid in mortar including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.
334
-
-
... More
Removing the existing treatment of waterproofing System (if any) given on the terraces and reach the sound surface below the present waterproofing system and cleaning the surface to reach the sound surface, remove all loose material with the help of tools and tackles from the surface and as well as from the hair line cracks & wide cracks if any
486
-
-
... More
Dismantling C.I. pipes G.S.W pipes abd A.C rain water with fitting and clamps including stacking the materials with all lead and lift. (for any dia., of pipe) Removing existing PVC rainwater down takes pipes up to 150 mm dia
20
-
-
... More
St. Thomas Church - Sub Head 18 - Structural Repairs
-
-
-
... More
Steel‐rod stitching in cracked stone patties, beam, and lintels with stainless steel rods of 90 cms length of which 15cm on either side and cold bending at 90 degrees in cracked stone patties, beam and lintels. The stainless steel clamps to be fixed perpendicular to the crack by drilling in stone and fixing with quartz sand and araldite mixture (1:3) in such a way that the entire length of the rod is in complete contact of the stone and the bent ends are fully inserted in the cracked stone. Use 316 grade stainless steel of dia 6mm, 8mm, 10mm or 12mm as per requirement and payment will be made in nos. for complete operations including labour and material for each stitching.
80
-
-
... More
Stitching of cracks in brick masonry with stone lintels of 450x 200x50 mm. Chasing, grooving the brick masonry and inserting the stone lintel. All around the stone, lime mortar should be properly packed
33
-
-
... More
Providing and inserting 12 mm dia. Aluminium/ galvanized iron injection nipples along crack lines in masonry work, including I) drilling holes of required diameter up to depths from 40mm to 80mm or half the thickness of member (whichever is less), at required spacing but not exceeding the thickness of member or 300 mm ii) Making grooves of size 12mm x 12mm along the crack line. iii) Making the crack dust free by blowing compressed air and then washing with water. iv) Sealing the distance between the injection nipples with approved putty (Polymer modified lime mortar /polyester putty/epoxy putty) etc. and allow it to cure. v) If limetious grout material proposed to be used, washing and saturating the cracked surface with water by pumping from top most nipple and down wards complete as per the direction of Engineer-in-charge.( The rate shall include all material, labour and all operations above. The cost of grout material shall be paid separately on the basis of actual quantity consumed.
217
-
-
... More
Providing and grouting pre-packed ready to use grout made up of natural hydraulic lime with the addition of natural pozzolona filler, specially designed for use in restoration of old brick/stone masonry. The grout material shall have low (less than 1.5%) water soluble salt content, Elastic modulus not less than 5 Gpa and minimum compressive strength of 18 N/sqmm at 28 days. Mix the product by introducing 3/4 of the required water (which is 7-8 litres of 25 kg or as per manufactures specification) into the mixer. Add continuously the product and the remaining water until perfect mixer having a fluid consistency is achieved. Inject the same with gravity or mechanized equipment with pressure not more than 2 kg/sqcm as per site conditions by means of injection technique. The item shall include all cost of materials, machinery and labour etc. complete in all respect. (The payment shall be made on the basis of actual weight of approved grout injected into the cracks /voids as directed by Engineer-in- Charge:
2170
-
-
... More
Reinforcement Cleaning: Cleaning reinforcement of total rust by tapping or using wire brush or any other suitable way including from behind and around the reinforcement bars to give it a totally rust free finished steel surface
35.09
-
-
... More
Rust Removal: Providing and applying approved alkaline chemical rust remover with paint brush and removing loose particles after 24 hours of its application
35
-
-
... More
Single Part PMM Treatment: Providing and laying of polymer modified single component, alkaline resistant fibre reinforced, duel shrinkage-compensated, thixotropic, cementitious patch repair mortar Emaco S48CT of BASF/ Renderoc S2 of Fosroc/ReCon GP 40 of Conmix or equivalent material that achieves compressive strength of 35 MPa at 7 days and finishing with trowel carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface on the beams, slabs. pile caps etc., where the thickness of application is less than 50mm in patches as per specification after applying bonding coat (bonding coat shall be payable separately). Item rate inclusive of all materials, labours, supervision, tools, tackles, transportation, scaffolding etc., complete as per specification and as directed
35
-
-
... More
Polymer Bond Coat: Mixing and applying Acrylic polymer modified cementitious bonding coat, on prepared non-metallic / cleaned concrete surface of parent material with specified proportion of polymer to weight of cement as per specification etc. complete
35
-
-
... More
St. Thomas Church - Sub Head 19 - Civil Repairs
-
-
-
... More
Lime plaster for Plain walls
Providing and applying lime plaster (Plain walls) up to 25mm thick, 12mm thk base coat in prepared lime + river sand and 10mm thk second coat in Prepared Lime +silica, 3mm final coat in lime putty 1:2 (Lime +fine Sand) by preparing the surface adequately with proper adhesion using molasses preparation complete as per Engineer-in-Charge.
3652
-
-
... More
Lime plaster for Cornices Band (All sizes)
Providing and applying lime plaster (Cornices Band Size 150mm wide and 50mm average thick) up to 25mm thick, 12mm thk base coat in prepared lime + river sand and 10mm thk second coat in Prepared Lime +silica, 3mm final coat in lime putty 1:2 (Lime +fine Sand) by preparing the surface adequately with proper adhesion using molasses preparation complete as per Engineer-in-Charge.
108
-
-
... More
Lime plaster for All ornamental work
Providing and applying Providing and applying lime plaster (Cornices Band ) up to 25mm thick, 12mm thk base coat in prepared lime + river sand and 10mm thk second coat in Prepared Lime +silica, 3mm final coat in lime putty 1:2 (Lime +fine Sand) by preparing the surface adequately with proper adhesion using molasses preparation complete as per Engineer-in-Charge
279
-
-
... More
Lime punning - Description
Providing and finishing render coat of not more than 4mm thick to lime stone surface, both plain and decorative/ covered on the main façade, in Lime: quartzs fine sand (inclusive of colouring pigment as required) using white lime in 1:3 Rates are including modification factor and shall be paid on plan area
387
-
-
... More
Raking out joints of stone masonry surface to the required width and depth, with due care and precaution, by mechanical / manual means, including preparing and cleaning the surface for re-pointing/ refilling of joints, including disposal of rubbish to the dumping ground within 50 meter lead
3652
-
-
... More
Ruled / Flush pointing on stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One lime: 1.5 surkhi (50% red and 50% light yellow surkhi) : 1/2 marble dust}. (The rate is inclusive of all materials & labours involved except scaffolding)
500
-
-
... More
Providing 20 mm thick double coat mala cement plaster on interior brick l concrete work for plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including scaffolding curing etc. complete.
35
-
-
... More
Providing and applying of Verona Vapour Permeable, water based Mature Lime wash finish of interior and exterior grade used for conservation and restoration of historical building, formulated by Mature Lime Putty with fillers by OIKOS India, After the cleaning of surface and removing any loose or flaking material, applied two coat of Verona Mature Lime wash finish by OIKOS India on one coat of Lime Based primer by OIKOS India of approved color and shade to achieve desired finish excluding the cost of surface preparation and scaffolding, apply by brush, roller and appropriate tools, as per manufacturer’s specification, all completes with the direction of Engineer-in-Charge. Internal and external
3737
-
-
... More
Providing 20 mm (average) thick base of lime mortar 1:2 ( 1lime : 2 fine sand), including pointing with lime mortar 1:2 (1 lime : 2 fine sand) with an admixture of pigment to match the shade of stone
5.4
-
-
... More
Floor Finishing
Providing and laying polished grey kota stone slab 25mm thick in risers of steps, skirting dado and pillars laid on 10mm thick cement mortar 1:3 (1- cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc complete.
329
-
-
... More
Termite Treatment Providing ant termite Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
270
-
-
... More
Lime Stone Masonry Repair :
Providing patch repair of eroded/cracked faces and edges of the various stone components of stone parapet wall including scrapping loose part using soft brushes, cleaning, washing & applying patching compound in lime mortar 1:2 , to match in true shape, size , texture , and colour as that of original, using matching stone dust of recommended mesh size of same type of natural stone, carefully and in a skilled manner to avoid damage to the adjoining areas of the component, cleaning, washing, curing etc. complete and in best workmanship including dressing of stones, grooving, jointing, making keys overlaps etc, and fixing with (1:2) 10% pozzolonic lime mortar, any anchoring required using SS/timber dowels wherever fixed with lime mortar (1:1), pointing with lime mortar etc complete as directed as directed by the Engineer-in-charge,
50
-
-
... More
Plastic Repairs in cornices (All sizes) :
Providing and fixing limestone (Plastic Repairs) work for (Cornices Band) up to 250 thick and 150 depth, etc including dressing of stones, grooving, jointing, making keys overlaps etc, and fixing with (1:2) 10% pozzolonic lime mortar, anchoring with SS/timber dowels wherever fixed with lime mortar (1:1), pointing with lime mortar etc complete as directed by Engineer-in-charge
150
-
-
... More
Plastic / mortar Repairs (in ornamental / decorative work in stone or raised stucco motifs / ornamental features, like figurative forms urns, cornices, mouldings, finials etc ) using lime based mortars that is compatible with the host substrate (to provide an effective bond) shall be used. Profiled plastic repair for retention of carved enrichments using anchoring armatures of non-ferrous metals / any other as existing in host substrate and color matching using traditional techniques etc in (1:1 / 1:2) 10% pozzolonic lime mortar, with additives etc complete as directed by Engineer-in-charge.
20
-
-
... More
White stone Bela masonry block in course in super structure with stone of approved quality in lime mortar 1:1.5 ( 1 lime : 1.5 Fine Sand) including packing the joints complete etc as per direction of Engineer-in-Charge.
45
-
-
... More
St. Thomas Church - Sub Head 20 - Door and Window work
-
-
-
... More
New Timber Frames :
Providing and fixing or replacing damaged frames with well-seasoned class A Indian teak wood (Nagpur teak, CP teak, Valsadi teak or equivalent) chemical treated Door/Window frames as per original design, size and pattern including all necessary fixture, fastner and architrave (moulding) along the frame etc. complete as directed by Engineer-in-charge.
18
-
-
... More
NewTimber Shutters :
Providing and fixing or replacing damaged window shutters with well-seasoned class A Indian teak wood ( Nagpur teak, CP Teak, Valasadi or equivalent) chemically treated Door/Window shutters as per original design, size and pattern including all necessary brass fittings like tower bolt, handles casement stay etc. complete as directed by Engineer-in-charge.
53
-
-
... More
Providing labour and teak wood frame material for repair and restoring old TW door & window frame by carefully scraping, replacing, finishing the decayed parts/ members with equal size of fresh well-seasoned class A Indian teak equivalent to old BTC / CP members such that the original frame & adjacent building component does not get affected including all necessary fixtures, fasteners, adhesive and architrave etc. complete as directed by Engineer-in-charge.
(Only new teak wood part will be measured.)
0.51
-
-
... More
Restoration of Original Timber shutters :
Providing labour and new Indian teak wood for Repair and restoring old BTC window shutters including panelling (external leaf partly panelled & partly glazed) by carefully scraping, replacing, finishing the decayed parts & components such as styles, rails, mullions, sash bars etc as per drawing & design so as to match the existing pattern, size, shape and fixing the same carefully using metal fasteners etc. complete in best workmanship and as directed
16.41
-
-
... More
Providing and painting two or more coat of oil based synthetic enamel paint to old or new doors, window and ventilators over one coat of primer and one coat of full putty made in same shade of enamel including thorough cleaning, and sand papering and sealing all cracks, crevices, dent, knot and holes with best quality of waterproof putty etc. complete on external face of wood shutters. make Asian, Berger
80.71
-
-
... More
Providing and applying two or more coat of woodteck touch wood exterior grade over shutters of Door, Window and ventilators after making the surface smooth with sandpapering and sealing all cracks, crevices, dent, knot and holes with best quality of waterproof putty to give transparent shade etc. complete. make Asian
80.71
-
-
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). 16 mm thick panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.
13.02
-
-
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces
1.52
-
-
... More
New Glazing for Doors/ Windows
Replacing and providing old damaged, broken transparent glazing to door window and ventilators shutter using 6 to 8 mm 'Modiguard' Float Glass / or of approved make
62.44
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
66.1
-
-
... More
St. Thomas Church - Sub Head 21 - Internal Furniture
-
-
-
... More
Providing and fixing Podium /Rostrum size of 0.8X1.2 m Made of Teak wood 18 mm ply board & teak veneer with French polish finish including with cost of labour, material, wooden cutting, Carpentry, Carving, sanding with polish paper and applying melamine polish and as directed by Engineer-In-Charge / Architect
1
-
-
... More
Providing and fixing Pedestal Large / platform size of 2X3X0.15m Made of Teak wood 18mm ply board & teak veneer with glossy polish finish including with cost of labour, material, wooden cutting, Carpentry, Carving, sanding with polish paper and applying melamine polish and as directed by Engineer-In-Charge / Architect
2
-
-
... More
Providing and fixing Rectangular Pedestals size of 1X0.75X0.15 m. for display of Statues /artefacts etc. Made of 18mm ply board & teak veneer & polish Duco Paint including with cost of labour, material, wooden cutting, Carpentry, Carving, sanding with polish paper and applying melamine polish and as directed by Engineer-In-Charge / Architect
6
-
-
... More
Providing and fixing Circular Pedestal Size Of 1.2 Mts Diameter for display of Statues etc. Made of 18mm ply board & teak veneer & polish Duco Paint including with cost of labour, material, wooden cutting, Carpentry, Carving, sanding with polish paper and applying melamine polish and as directed by Engineer-In-Charge / Architect
1
-
-
... More
Providing and fixing Display (Centre Piece) Desk size of 2.0 mts X 1.0 mts. Table top – 1.0 mts high Desk with drawers with acrylic and melamine polish Made of Teakwood and 18mm ply board including with cost of labour, material, wooden cutting, Carpentry, Carving, sanding with polish paper and applying melamine polish and as directed by Engineer-In-Charge / Architect
1
-
-
... More
Providing and fixing CHOIR PEWS (SEATS) size of - 2.0 mts. X 0.75 mts
(width) nominal design. Made of Indian Teak wood 18mm ply board & teak veneer with glossy polish finish including with cost of labour, material, wooden cutting, Carpentry, Carving, sanding with polish paper and applying melamine polish and as directed by Engineer-In-Charge / Architect
2
-
-
... More
Providing and fixing ALTAR DESK size of 1x2.7 x 0.8 m. Made of Teak wood &18mm plyboard and teak veneer with melamine polish finish including with cost of labour, material, wooden cutting, Carpentry, Carving, sanding with polish paper and applying melamine polish and as directed by Engineer-In-Charge / Architect
1
-
-
... More
Providing and fixing Retable– Elevation area size of 4mts X 6mts. Width - .30 mts
Made of Indian Teak wood & 18mm plyboard & teak veneer with melamine polish finish including with cost of labour, material, wooden cutting, Carpentry, Carving, sanding with polish paper and applying melamine polish and as directed by Engineer-In-Charge / Architect
1
-
-
... More
Providing and fixing Timber Railing Height 450mm, total length 4.44M Made with Material Teak wood/ Sevan Wood. Finishing in Melamine polish including with cost of labour, material, wooden cutting, Carpentry, Carving, sanding with polish paper and applying melamine polish and as directed by Engineer-In-Charge / Architect
1
-
-
... More
Providing and fixing Display Unit– 3.0 mts x 0.5 mts (shelves) Bottom Storage drawers to be .75 mts. Wide. Made of Ply board with veneer finish including with cost of labour, material, wooden cutting, Carpentry, Carving, sanding with polish paper and applying melamine polish and as directed by Engineer-In-Charge / Architect
1
-
-
... More
Providing and fixing Counter, Display size of 3.0 x 0.8 M
Made of Teak wood 18mm plyboard & teak veneer with glass and glossy finish Glass top and sides. Openable shutters from internal side including with cost of labour, material, wooden cutting, Carpentry, Carving, sanding with polish paper and applying melamine polish and as directed by Engineer-In-Charge / Architect
1
-
-
... More
Providing and fixing Carousel for Dispaly of Souvenir Items size of Bottom circle – 1.0 mts, Topmost circle - .3 mts, Height – 1.4 mts. Made of Plywood finish teakwood veneer finish& laminate finish. Base to have castor wheels for mobility. The circular base to have SWIVEL adjustments (to rotate) including with cost of labour, material, wooden cutting, Carpentry, Carving, sanding with polish paper and applying melamine polish and as directed by Engineer-In-Charge / Architect
1
-
-
... More
Providing and fixing bench size of 2.5x0.6 Made of Teak wood 18mm plyboard & teak veneer with French polish finish with foot small table including with cost of labour, material, wooden cutting, Carpentry, Carving, sanding with polish paper and applying melamine polish and as directed by Engineer-In-Charge / Architect
33
-
-
... More
St. Thomas Church - Sub Head 22 -Terrace Waterproofing
-
-
-
... More
Providing and laying integral cement based brickbat coba water proofing treatment including preparation of surface With average thickness of 120 mm and minimum thickness at khurra as 65 mm as required for treatment of roofs, balconies, terraces etc consisting of following operations and furnishing a guarantee bond of 10 years: a) Applying a slurry coat of neat cement using 2.7 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approve by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick joint less cement mortar of mix 1:4 (1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
486
-
-
... More
Providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar crème out upto surface using white cement including rounding of junctions and extending them upto 18 cm along the wall, clearing with water and oxalic acid etc. as directed.
486
-
-
... More
St. Thomas Church - Sub Head 23 - Rain Water Drainage System/ ventilation System
-
-
-
... More
Providing and fixing P.V.C. rain water/ electrical pipes of 110mm outer diameter and having, bend, necessary fittings, such as, offsets, shoes including fixing the pipe on wall fixing with clips of approved quality and number, approved from Engineer-in-Charge. etc. complete
165
-
-
... More
Providing and fixing Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non-modular) bricks of class designation 7.5
10
-
-
... More
Providing and laying cement concrete of 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of form work in (A) foundation and plinth (upto 10 ton)
4.02
-
-
... More
Providing and laying reinforced cement concrete 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) (M20) grade using OPC grade 43 minimum @ 400 kg/cum and graded stone aggregates 20 mm nominal maximum size in footings (of any thickness) up to plinth level, including the cost of centering, shuttering and finishing, excluding the reinforcement as per the design requirement.
5.93
-
-
... More
Providing and laying reinforced cement concrete 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm (M20) grade using OPC grade 43 minimum @ 400 kg/cum and graded stone aggregates 20 mm nominal maximum size in column (of any thickness) above plinth up to floor five level, including the cost of centering, shuttering and finishing, excluding the reinforcement as per design requirement.
1.69
-
-
... More
Providing and laying reinforced cement concrete 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm (M20) grade using OPC grade 43 minimum @ 400 kg/cum and graded stone aggregates 20 mm nominal maximum size in walls (of any thickness) above plinth up to floor five level, including the cost of centering, shuttering and finishing, excluding the reinforcement as per design requirement.
11
-
-
... More
Providing and laying reinforced cement concrete 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) (M20) grade using OPC grade 43 minimum @ 400 kg/cum and graded stone aggregates 20 mm nominal maximum size in slabs (of any thickness) up to plinth level, including the cost of centering, shuttering and finishing, excluding the reinforcement as per the design requirement.
2
-
-
... More
Providing and laying reinforced cement concrete work in beam including the cost of centering, shuttering, finishing, excluding the reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). Grade using OPC grade 43 minimum @ 400 kg/cum and graded stone aggregates 20 mm nominal maximum size as per the design requirement.
1.08
-
-
... More
Providing TMT Bar FE 500 reinforcement for R.C.C work including bending, binding and placing in position complete. ( Upto 10 ton)
2.25
-
-
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality. H D - 20 - Circular shape 560 mm internal diameter
3
-
-
... More
Supplying, filling, spreading & leveling stone boulders (pebbles) of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
6.28
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, un-plasticized PVC medium well casing (CM) pipe of required dia., conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia
30
-
-
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 meter depth below ground level. All types of soil. 300 mm dia.
30
-
-
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp
1
-
-
... More
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS: 2800 (part I). 150 mm dia.
1
-
-
... More
St. Thomas Church - Sub Head 24 - French Drain
-
-
-
... More
Excavation for foundation for depth from 1.5m to 3 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 m lead. (A) Loose or soft soil.
40.06
-
-
... More
Providing and laying Covering top of membrane with Geotextile, 120 GSM, non-woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. around periphery
272.42
-
-
... More
Providing and supplying of Class SN8 Structured Wall polyethylene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage application as per EN:13476-3 including all local and central taxes, transportation, freight charges, octroy, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete as directed by Engineer-in-charge (ID Dia)
106.83
-
-
... More
Lowering, laying and jointing of class SN 8 structured wall ( External Annular Corrugated & Smooth Internal surface) Polyethylene Piping and fittings with the help of coupler ( on line / off line ) attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of the corrugation at the spigot end, lowering the same into the trench at all level, laying on the lower bedding (constructed at bottom of trenches) at prescribed gradient, depth & alignment ,testing the water tightness of the joints, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detailed engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge.
106.83
-
-
... More
Supplying and stacking Laying, spreading and compacting 150 mm thick stone aggregate of 10mm to 20 mm. Binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.
17.61
-
-
... More
Supplying and stacking Laying, spreading and compacting 150 mm thick stone aggregate of 20mm to 40 mm. Binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.
7.21
-
-
... More
Silt collection chamber : Providing and laying of 12 mm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. For internal walls
5
-
-
... More
St. Thomas Church - Sub Head 25 - Anti-Termite Treatment
-
-
-
... More
Providing Around periphery of building Diluting and injecting chemical emulsion for Post-Constructional anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
150
-
-
... More
Providing Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same as directed by the Engineer-in-Charge.
24
-
-
... More
St. Thomas Church - Sub Head 26 - Electrification
-
-
-
... More
Chandelier big (A 24 LIGHTS BRASS JHOOMER) :Diameter‐7.5 feet 24 Pc LED 4 Watt BULB (SYSKA)
Fitting And Setting
100 meter copper cable with Antique Color (Yellow Brass) , 4 meter 50 mm dia GI pipe of 14 gauge"
6
-
-
... More
Chandelier small(A 18 LIGHTS BRASS JHOOMER) Diameter‐5.5 feet, 18 Pc LED 4 Watt BULB (SYSKA)
Fitting And Setting
100 meter copper cable, Clear Warnish with Antique Color (Yellow Brass), 4 meter 50 mm dia GI pipe of 14 gauge
3
-
-
... More
Lantern lights: HEIGHT ‐22INCH,
DIAMETER‐ 10.5 Inch, with 3 Pc LED 4 WATT BULB (SYSKA)
18
-
-
... More
Providing , fixing and testing of Wall Mounted Down Light :Height‐30 inchDia‐10 inch4 pc Led Bulb with brass stand
2
-
-
... More
Two Dimensional Light (7W) :
Wall mounted luminaire with fully shielded light source for up or down lighting effects, integrated with 7W LED, Powder coated main part of extruded Aluminium hollow circular section with tempered clear glass retained by die cast Aluminium frame on top or bottom. The main part is assembled with mounting base using hardware. Surface mounting on wall using hardware after connecting x 165 mm, LED POLE FITTING HSN CODE-94051090
2
-
-
... More
Providing fixing and testing of FLEXIBLE LED STRIP :
LED strip for indoor use. For up lighting. Aluminium to the power supply. Finished with pure polyester powder coated graphite grey. Pre-wired with LED driver and suitable for operation in 240V, 50Hz, single phase ac supply, besides terminal for earthing. IP 65.Two Directional Wall:145 Washers, Dimension 100 profile and silicone diffuser included, Structure RI 80,Real Lumen -1878Lm,color Tempe-material: Aluminium. Structure, finish: Matt. Diffuser material: Polycarbonate. Diffuser finish Transparent, unit wattage 28W,Crature 3000K,beam angle 3000K,IP68,product code ION Led strip 91-5506-54-M2,
150
-
-
... More
Providing , fixing and testing of Mushroom Arcus Bollard lights (16W LED) : Luminaire made of MS tube hot dip galvanized steel for extra guarantee against corrosion with die-cast Aluminium at top cover and non-corrosive SS fasteners, Translucent acrylic diffuser, • GI mounting plate for bolting onto a foundation. Luminaire can be aligned on the mounting plate around 360°,Cable entries for through-wiring of mains supply cable, Integral power supply, Earth connection Safety class I, Protection class IP54 ,Suitable for operation on 240V, 50Hz single phase ac supply, dimensions 166mmX485mm,id -5545,
42
-
-
... More
Providing ,fixing and testing of Wall Mounted Down Light (6W LED) : Model HLO‐5508(6W),Dimensions -86 X 160 X 100 mm, HYBEC Brand ,model name Elite Series, Fixture finish Graphite Grey, fixture material Aluminium Die-Cast, bulb recommended Epi-star LED,BULB HOLDER & PLUG TYPE is E27
21
-
-
... More
Supply, erection and testing of Post Top Light: (45W LED) & 3.5meters pole height Die-cast and sheet aluminium (UNI EN 1706).Refractive lens mod. 02 - Road and mixed areas - classes CE-S. To access the optical and wiring compartment, unscrew the two screws on upper frame and rotate the bottom frame. During installation, follow the instructions for the correct orientation on the support. LED 5MacAdam L90B50,CRI 70,Real Lumen -4500Lm,color temperature 3000K,beam angle Type V,IP66
5
-
-
... More
Architectural Post Top Pole :
JM.06.18.010/ DW
WINDSOR/GHM 3.5M height Pole made of mild steel pipe sections 114mm dia. & 76mm dia. Decorative Cast iron Base design with the company/brand logo engraved in the cast iron mould, starting with dia 260mm for 130mm height, followed by a ring of 260 dia gradually tapering to a flat round surface of dia 170mm for 366mm height again followed by a ring dia 210mm and gradual tapering upto a dia 92mm as approved by the concerned Engineer-in-Charge the total height of decorative cast iron base is 700mm and weight-32kgs.Decorative Top ring(weight-3kgs.) made of cast iron as well. All cast iron parts weight mentioned are with +/5% tolerance. Entire pole shall be made to provide pleasing aesthetics as approved
5
-
-
... More
Supply, fixing and testing of Matthews KC-TB, Kaye Textured Bronze 13":
DIMENSIONS: 17.5" from Wall / Ceiling to End of Fan Head, Mount is 5.5" Diameter; Weight 10.5lbs
FAN BLADES: Includes Three Textured Bronze Blades - (13" Span / 31° Blade Pitch) 1302.65 CFM-High
CONTROL: AT-ME-WC - Three-Speed Fan Wall Control with 90° Oscillation from Control
ETL Listed Damp Locations; MATERIALS: Cast Aluminium and Heavy Stamped Steel, FINISH: Textured Bronze
Wall Control Included, Optional Remote Sold Separately, Part Number: AT-RC-AC-WALL
SPECIAL DETAILS: Ideal for small spaces or in front of HVAC ducts to make the heating or cooling of any room more efficient
19
-
-
... More
Supply, erection and testing of 16-Way power distribution Board : TPN DB [8537] IK 08-for single door DBs, IK 09-for double door DB DBs Available in CRCA sheet steel, RAL 9003, powder coated Ready to use DBs - Provided with 100A insulated phase bus-bars | neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cable ties | blanking plates and circuit identification labels with provision for FP MCB/Isolator/RCCB/RCBO as incomer and SP MCBs as outgoings, cat no DBTPN016DD,incoming 8 and outgoing 16+16+16.
1
-
-
... More
2 runs of 1C X 1.5 sq.mm PVC copper Wire : (PVC / XLPE ARMOURED Cables with COPPER Conductor 1100 V. Grade confirming to IS : 7098 (Pt-1) 1988) Supply and laying of POLYCAB' P.V.C. insulated unsheathed bright annealed bare copper conductor single core industrial cables & PVC insulated, PVC round sheathed multicore industrial Cables for voltage grade upto 1100 V. as per IS 694:1990..
200
-
-
... More
For Earthing & Source for the room from Nearest DB: 1C X 2.5sq.mm PVC copper Wire :
(PVC / XLPE ARMOURED Cables with COPPER Conductor 1100 V. Grade confirming to IS: 7098 (Pt-1) 1988)Supply and laying of POLYCAB' P.V.C. insulated unsheathed bright annealed bare copper conductor single core industrial cables & PVC insulated, PVC round sheathed multicore industrial Cables for voltage grade upto 1100 V. as per IS 694:1990..
200
-
-
... More
Supply and fixing of 3 wire 2.5 sq. mm PVC copper Cable :
Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size with medium class Rigid PVC pipe and accessories (b) 3 wire 2.5 sq. mm
300
-
-
... More
Supply and fixing of 4C X 6sq.mm PVC copper Cable :
Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size (L)4 core 6 Sq. mm
480
-
-
... More
Supply and fixing of Half Inch PVC Conduit :
Dimensions of Round Conduit PVC Pipes IS : 9537 Part 3 Supply of PVC conduit pipes outside diameter of half inch for the 1Core 1.5sqmm cable passes through the wall of the walkway .Make -Precision pipes
350
-
-
... More
Supply and fixing Of One And Half Inch PVC Conduit :
Dimensions of Round Conduit PVC Pipes IS : 9537 Part 3 ,Supply of pvc conduit pipes outside diameter of 32mm i.e. one and half inch for the cable passes through the wall and also through ground .Code is PRC 32L, 50 x 3m.HSN: 39172310Make -Precision pipes
780
-
-
... More
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi-strand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ceiling complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D. Connector as directed. (a) with medium class Rigid PVC pipe and accessories. Cat-III
11
-
-
... More
Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi-strand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D. Connector as directed with medium class Rigid PVC pipe and accessories Cat. III
19
-
-
... More
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi-strand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. i) For 16A Plug with 2-2.5 sq.mm Cu. Wire (a) with medium class Rigid PVC pipe and accessories. Cat-III i) For 16A Plug with 2-2.5 sq.mm Cu. Wire (a) with medium class Rigid PVC pipe and accessories. Cat-III
6
-
-
... More
ii) For 6A Plug with 2-1.5 sq.mm Cu. Wire (a) with medium class Rigid PVC pipe and accessories. Cat-III
15
-
-
... More
Supplying & erecting in earth pit of minimum bore dia. 225mm size ASH or approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I. Pipes having Outer pipe dia. of 80 mm having 80-200 Micron galvanizing, Inner pipe dia of 40 mm having 200-250 Micron galvanizing, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C. Plant & Sensitive Computer System(like Automation, SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft Rock, Marshy Soil etc..-Length of Pipe: 3 Mtrs. -Back filling Compound :2 nos Bags of 25 Kg.
2
-
-
... More
Lightning Arrester :
Supply and installation of the lightning arrester of area Coverage of the 107Metres Radius with the Accessories Insulator, Roof Wire, Stay wire, GI Mast 5 MTR Length 50MM dia. with base plate,6-Digit Surge counter, with the 70Sq.mm copper cable
1
-
-
... More
LINEATE 24W DMX 30X65⁰ : Supply, Installation, Testing and Commissioning of exterior BIS Registered rated LED RGBW Wall grazing light luminaires with dedicated optics for architectural lighting. Luminaire has a choice of architectural floodlighting optics with beam angles of 25°/40°/60°/80°/30X65°. Wattage not exceeding 22-26W,with system lumen output of minimum 1300 lumen with all LED ON and operating voltage of 24 V DC. Fixture should have aluminium alloy body, powder-coated finish of RAL7040 with Clear tempered glass lens and should have 24 no. of LED,s. Luminaire lifetime of 70,000 hours at 50 degree Centigrade @L70 and IP 66 & IK7 protection against weather. Fixture should have Height 81 mm±1% including surface mount base width 43 mm ± 1%, length 1000 mm ±1% with constant locking hinges for simple position control from various angles without special tools. The light fixture should be programmable using 8 bit control DMX512 protocol with Operating Temperature Range from -35ºC to 50ºC. LED make should be only Nichea, Osram, Cree, Lumiled. Work should be complete with necessary factory made weather proof cable, lenses, and external power and data supply [if any], wiring, junction boxes, provisioning of power and data cabling etc. as required. Suitable fixing arrangement , Foundation as required complete in all respect as per direction of Engineer-in-Charge.
20
-
-
... More
LINEATE 24W DMX 30X65⁰ :
Supply, Installation, Testing and Commissioning of exterior BIS Registered rated LED RGBW Wall grazing light luminaires with dedicated optics for architectural lighting. Luminaire has a choice of architectural floodlighting optics with beam angles of 25°/40°/60°/80°/30X65°. Wattage not exceeding 22-26W,with system lumen output of minimum 1300 lumen with all LED ON and operating voltage of 24 V DC. Fixture should have aluminium alloy body, powder-coated finish of RAL7040 with Clear tempered glass lens and should have 24 no. of LED,s. Luminaire lifetime of 70,000 hours at 50 degree Centigrade @L70 and IP 66 & IK7 protection against weather. Fixture should have Height 81 mm±1% including surface mount base width 43 mm ± 1%, length 1000 mm ±1% with constant locking hinges for simple position control from various angles without special tools. The light fixture should be programmable using 8 bit control DMX512 protocol with Operating Temperature Range from -35ºC to 50ºC. LED make should be only Nichea, Osram, Cree, Lumiled. Work should be complete with necessary factory made weather proof cable, lenses, and external power and data supply [if any], wiring, junction boxes, provisioning of power and data cabling etc. as required. Suitable fixing arrangement , Foundation as required complete in all respect as per direction of Engineer-in-Charge.
10
-
-
... More
LINEATE 12W DMX 25⁰ :
Supply, Installation, Testing and Commissioning of exterior rated LED RGBW Wall grazing light luminaires with dedicated optics for architectural lighting. Luminaire has a choice of architectural floodlighting optics with beam angles of 25°/40°/60°/80°/30X65°. Wattage not exceeding 10-15W,with system lumen output of minimum 650 lumen with all LED ON and operating voltage of 24 V DC. Fixture should have aluminium alloy body, powder-coated finish of RAL7040 with Clear tempered glass lens and should have 12 no. of LED,s. Luminaire lifetime of 70,000 hours at 50 degree Centigrade @L70 and IP 66 & IK7 protection against weather. Fixture should have Height 81 mm±1% including surface mount base width 43 mm ±1%, length 500 mm ±1% with constant locking hinges for simple position control from various angles without special tools. The light fixture should be programmable using 8 bit control DMX512 protocol with Operating Temperature Range from -35ºC to 50ºC. LED make should be only Nichea, Osram, Cree, Lumiled. Work should be complete with necessary factory made weather proof cable, lenses, and external power and data supply [if any], wiring, junction boxes, provisioning of power and data cabling etc. as required. Suitable fixing arrangement , Foundation as required complete in all respect as per direction of Engineer-in-Charge.
10
-
-
... More
COMPASS 28W DMX 40° :
Supply, Installation, Testing and Commissioning of exterior rated round LED wall washing RGB flood light luminaires with dedicated optics for architectural lighting. Luminaire has a choice of architectural floodlighting optics with beam angles of 10°/25°/40°/60°. Wattage not exceeding 25-30W, with system lumen output of minimum 1000 lumen with all LED ON and operating voltage of 100- 277V AC. Fixture should have Die-cast Aluminium, powder-coated finish of RAL9023 with Clear tempered glass lens and should have 24 no. of LED,s. Luminaire lifetime of 70,000 hours at 50 degree Centigrade @L70 and IP 66 & IK7 protection against weather. Fixture should have Height 208 mm±1% including surface mount base and outer dia of 224 mm±1% with constant locking hinges for simple position control from various angles without special tools. The light fixture should be programmable using 8 bit control DMX512 protocol with Operating Temperature Range from -35ºC to 50ºC. LED make should be only Nichea, Osram, Cree, Lumiled. Work should be complete with necessary factory made weather proof cable, lenses, and external power and data supply [if any], wiring, junction boxes, provisioning of power and data cabling etc. as required. Suitable fixing arrangement , Foundation as required complete in all respect as per direction of Engineer-in-Charge.
6
-
-
... More
RANGER 120W DMX 40° :
Supply, Installation, Testing and Commissioning of exterior BIS Registered rated LED wall washing RGB flood light luminaires with dedicated optics for architectural lighting. Luminaire has a choice of architectural floodlighting optics with beam angles of 10°/25°/40°/60°/25X60°. Wattage not exceeding 110-120W,with system lumen output of minimum 4000 lumen with all LED ON and operating voltage of 100- 277V AC. Fixture should have Die-cast Aluminium, powder-coated finish of RAL7040 with Clear tempered glass lens and should have 72 no. of LED,s. Luminaire lifetime of 70,000 hours at 50 degree Centigrade @L70 and IP 66 & IK7 protection against weather. Fixture should have Height 364 mm±1% including surface mount base width 188 mm±1% , length 390 mm ±1% with constant locking hinges for simple position control from various angles without special tools. The light fixture should be programmable using 8 bit control DMX512 protocol with Operating Temperature Range from -35ºC to 50ºC. LED make should be only Nichea, Osram, Cree, Lumiled. Work should be complete with necessary factory made weather proof cable, lenses, and external power and data supply [if any], wiring, junction boxes, provisioning of power and data cabling etc. as required. Suitable fixing arrangement , Foundation as required complete in all respect as per direction of Engineer-in-Charge.
4
-
-
... More
RANGER 70W DMX 60° :
Supply, Installation, Testing and Commissioning of exterior rated LED wall washing RGB flood light luminaires with dedicated optics for architectural lighting. Luminaire has a choice of architectural floodlighting optics with beam angles of 10°/25°/40°/60°/25X60°. Wattage not exceeding 65-75W,with system lumen output of minimum 2700 lumen with all LED ON and operating voltage of 100- 277V AC. Fixture should have Die-cast Aluminium, powder-coated finish of RAL7040 with Clear tempered glass lens and should have 54 no. of LED,s. Luminaire lifetime of 70,000 hours at 50 degree Centigrade @L70 and IP 66 & IK7 protection against weather. Fixture should have Height 364 mm±1% including surface mount base width 188 mm±1% , length 390 mm ±1% with constant locking hinges for simple position control from various angles without special tools. The light fixture should be programmable using 8 bit control DMX512 protocol with Operating Temperature Range from -35ºC to 50ºC. LED make should be only Nichea, Osram, Cree, Lumiled. Work should be complete with necessary factory made weather proof cable, lenses, and external power and data supply [if any], wiring, junction boxes, provisioning of power and data cabling etc. as required. Suitable fixing arrangement, Foundation as required complete in all respect as per direction of Engineer-in-Charge.
2
-
-
... More
Engross 27W DMX 10° :
Supply, Installation, Testing and Commissioning of high strength exterior rated LED RGB Ground Buried Uplighter luminaires with dedicated optics for architectural lighting. Luminaire has a choice of architectural floodlighting optics with beam angles of 10°/25°/40°/60°. Wattage between 26-34W,with system lumen output of minimum 1072 lumen with all LED ON and operating voltage of 100- 277V AC. Fixture should have high pressure Die-cast Aluminium body with cover of stainless steel and buried barrel of high-quality corrosion resistant nylon with high strength toughened glass which can withstand a weight of 2500 KG and should have 24 no. of LED,s. Luminaire lifetime of 70,000 hours at 50 degree Centigrade @L70 and IP67 & IK10 protection against weather. Fixture should have Height 185 mm±1% and outer dia. of 240 mm±1%. The light fixture should be programmable using 8 bit control DMX512 protocol with Operating Temperature Range from -10ºC to 50ºC. LED make should be only Nichia, Osram, Cree, Lumiled. Work should be complete with necessary factory made weather proof cable, lenses, and external power and data supply [if any], wiring, junction boxes, provisioning of power and data cabling etc. as required. Suitable fixing arrangement , Foundation as required complete in all respect as per direction of Engineer-in-Charge.
2
-
-
... More
Engross 15W DMX 10° :
Supply, Installation, Testing and Commissioning of high strength exterior rated LED RGB Ground Buried Uplighter luminaires with dedicated optics for architectural lighting. Luminaire has a choice of architectural floodlighting optics with beam angles of 10°/25°/40°/60°. Wattage between 14-18W,with system lumen output of minimum 520 lumen with all LED ON and operating voltage of 100- 277V AC. Fixture should have high pressure Die-cast aluminium body with cover of stainless steel and buried barrel of high-quality corrosion resistant nylon with high strength toughened glass which can withstand a weight of 2500 KG and should have 12 no. of LED,s. Luminaire lifetime of 70,000 hours at 50 degree Centigrade @L70 and IP67 & IK10 protection against weather. Fixture should have Height 185 mm±1% and outer dia of 240 mm±1%. The light fixture should be programmable using 8 bit control DMX512 protocol with Operating Temperature Range from -10ºC to 50ºC. LED make should be only Nichia, Osram, Cree, Lumiled. Work should be complete with necessary factory made weather proof cable, lenses, and external power and data supply [if any], wiring, junction boxes, provisioning of power and data cabling etc. as required. Suitable fixing arrangement , Foundation as required complete in all respect as per direction of Engineer-in-Charge.
4
-
-
... More
DMX Controller (UE7) :
Supply, Installation, Testing and Commissioning of DMX Controller for the system including all other accessories required for the running of the system Controller should have Input Power 5-5.5V DC 0.6A and Output Protocol DMX512 (x2). It should be compatible for Programmability with PC, Mac, Tablet, Smart phone. It must have Connections Mini USB, XLR3, XLR5, Ethernet, 2x HE10, battery. There should be provision for Memory microSD card. Operating Temperature is 0°C - 50°C. Dimensions should be 79x92x43mm and weight should not be more than 120g. OS Requirements for the controller is Mac OS X 10.8-10.12, Windows 7/8/10. Standards should be EC, EMC, ROHS. The controller should have a variety of features including 1024 DMX channels, clock/calendar, iPhone/iPad/Android remote control, Ethernet facilities, dry contact port triggering and multi-zone SD card memory. Network synchronization of one area across hundreds of universes with the possibility of 250 scenes across 5 areas with auto clock triggering for sunrise and sunset and as per the festivals for specific occasions, The controller should be supplied along the at least 6 port network hub along with the controller which can be connected on cloud server and integrated with the Android device for controlling various scenes. Equivalent Havells DMX Pro, Philips iPlayer 3 with data enablers and splitters as required.
1
-
-
... More
Programming and Commissioning (1 Job)
1
-
-
... More
One and Half Inch PVC Conduit :
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed (32mm)
500
-
-
... More
3c X 0.75 Flexible Copper Cable (Annealed Bare Copper Conductor PVC Insulated Tinned Copper Braided (Screened) :
supply and laying of 3 core 0.75 sqmm PVC insulated armoured copper cable including cost, conveyance, all taxes and labour charges etc., complete and with cable route indicators. WHMFDSKB3X75 ,HSN CODE: 8544.
500
-
-
... More
CCTV Camera :
Installation and commissioning of CCTV Cameras with all relevant accessories including the Cable laying and conduits
1
-
-
... More
St. Thomas Church - Sub Head 27 - Plumbing Works
-
-
-
... More
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) pipe having national sanitation foundation (NSF) seal for potable water of following dia. Nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc., complete (B) 20 mm
7.5
-
-
... More
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) pipe having national sanitation foundation (NSF) seal for potable water of following dia. Nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc., complete (C) 25 mm
56.26
-
-
... More
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) pipe having national sanitation foundation (NSF) seal for potable water of following dia. Nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc., complete (F) 50 mm
47.47
-
-
... More
Providing and fixing 20 mm pop up sprinkler system including support pipe including material and labour
6
-
-
... More
Providing and fixing Gun metal check or non-return full way wheel valve (B) 20mm dia
6
-
-
... More
Supply & Fixing of new water cooler (Tank SS 304 & Outer Body 202) with Storage capacity 120 Lt. and Cooling capacity 80 Lt/hr including Transportation including material and labour
1
-
-
... More
RCC water Tank :
Providing and laying cement concrete of 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) and curing complete including the cost of form work in (A) Independent piers, columns, and pillars, upto floor two level
0.58
-
-
... More
RCC water Tank :
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
10.14
-
-
... More
RCC water Tank :
Providing and fixing 18 mm thick gang saw cut, river washed, pre-moulded and pre-polished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
11
-
-
... More
RCC water Tank :
Providing and applying 12 mm (average) thick cement plaster of 1:4 of mix complete as per Engineer-in-Charge.
21
-
-
... More
RCC water Tank :
Providing and fixing Rectangular cover 455x610 mm with frame (medium duty) including with cost of material and labour
1
-
-
... More
RCC water Tank :
Providing and fixing Plumbing work of water tank pipe and fittings including with cost of material and labour as required
1
-
-
... More
St. Thomas Church - Sub Head 28 - Fire Fighting System
-
-
-
... More
Pumps and Equipment - Main Pump Fire Pump : Installation testing & Commissioning of ELECTRIC MOTOR DRIVEN, horizontal split casing, centrifugal fire duty operation pump, (with mechanical seal, bronze Impeller & carbon steel EN-8shaft) capable for a DISCHARGE of 1620 L.P.M at a HEAD of 55 M head with 40 HP, coupled through fixable coupling (I/C coupling guard) with totally enclosed squirrel cage 4 pole Induction motor suitable for operation on three phase AC supply of 415+or- 10% volts, 50 HZ, fixing the couple pump and motor on a common structural base frame, making a suitable cement concrete foundation and mounting the complete pump-motor set on the foundation using suitable numbers of anti-vibration mounting and as per the detailed specifications Make: Kirioskar
1
-
-
... More
Pumps and Equipment - Jokey Fire Pump :
Installation testing & Commissioning of ELECTRIC MOTOR DRIVEN, horizontal split casing, centrifugal fire duty operation pump, (with mechanical seal, bronze Impeller & carbon steel EN-8shaft) capable for a DISCHARGE of 180 L.P.M at a HEAD of 55 M head with 12.5 HP, coupled through fixable coupling (I/C coupling guard) with totally enclosed squirrel cage 4 pole Induction motor suitable for HZ, fixing the couple pump and motor on a common structural base frame, making a suitable cement concrete foundation and mounting the complete pump-motor set on the foundation using suitable numbers of anti-vibration mounting and as per the detailed specifications Make: Kirioskar
1
-
-
... More
Pumps and Equipment - SITC of Main Electrical Panel :
Supply, Installation, Testing and commissioning of dust, damp and vermin proof free floor standing factory built sheet steel enclosed non-draw out modular firefighting panel, fabricated out of suitable sized square tubular section and covered with 2.0mm thick CRCA sheet, hinged doors of 2 mm thick CRCA sheet, duly painted completed with Aluminium bus bars, Inter-connection with solid copper conductor wires/Aluminium stips, neutral links, earth bus etc. necessary metering protection & Indications
1
-
-
... More
Electrical Works - SLFTC of conductor cable :
Supply, laying, fixing, end termination, testing and commissioning of following sizes of PVC insulated PVC sheathed armoured 3 ½ Core x 35 Sq. mm aluminium conductor cable of 1.1 KV grade on existing cable tray/surface as required.
60
-
-
... More
Electrical Works - SLFTC of conductor cable :
Supply, laying, fixing, end termination, testing and commissioning of following sizes of PVC insulated PVC sheathed armoured 3 Core x 10 Sq. mm aluminium conductor cable of 1.1 KV grade on existing cable tray/surface as required.
30
-
-
... More
Electrical Works - SLFTC of conductor cable :
Supply, laying, fixing, end termination, testing and commissioning of following sizes of PVC insulated PVC sheathed armoured 2 Core x 1.5 Sq. mm aluminium conductor cable of 1.1 KV grade on existing cable tray/surface as required
100
-
-
... More
Piping And Accessories - SLFTC of MS pipes on surface :
Supplying, laying, fixing and commissioning of 100 mm dia (NB) of ISI marked C- class GI pipes including cutting, threading, wielding etc. and providing all fittings e.g. elbows, reducers, clamps hangers, flanges, gaskets, nuts, bolts, and washers etc. including painting of pipes and fitting with red paint over a coast of ready mixed primer, both of approved quality complete in all respect as required. Make: TATA/JINDAL
180
-
-
... More
Piping And Accessories - SLFTC of MS pipes on surface :
Supplying, laying, fixing and commissioning of 80 mm dia (NB) of ISI marked C- class GI pipes including cutting, threading, wielding etc. and providing all fittings e.g. elbows, reducers, clamps hangers, flanges, gaskets, nuts, bolts, and washers etc. including painting of pipes and fitting with red paint over a coast of ready mixed primer, both of approved quality complete in all respect as required. Make: TATA/JINDAL
60
-
-
... More
Piping And Accessories - SLFTC of MS pipes on surface :
Supplying, laying, fixing and commissioning of 25 mm dia (NB) of ISI marked C- class GI pipes including cutting, threading, wielding etc. and providing all fittings e.g. elbows, redusers, clamps hangers, flanges, gaskets, nuts, bolts, and washers etc. including painting of pipes and fitting with red paint over a coast of ready mixed primer, both of approved quality complete in all repect as required. Make: TATA/JINDAL
60
-
-
... More
SITC of butterfly valves :
Supplying, laying, fixing, testing and commissioning of butterfly valves of PN 1.6 rating of 100 mm dia with nitrile seat and stainless steel stem with lever/gear operation and cast iron body in powder coated finish for firefighting application complete in all respects as required
4
-
-
... More
SITC of butterfly valves :
Supplying, laying, fixing, testing and commissioning of butterfly valves of PN 1.6 rating of 80 mm dia with nitrile seat and stainless stell stem with lever/gear operation and cast iron body in powder coated finish for firefighting application complete in all respects as required
4
-
-
... More
SITC of cast Iron flanged Non returns valves :
Supplying, laying, fixing, testing and commissioning of cast iron and flanged Non return valves of PN 1.6 rating of 100mm dia conforming to relevant IS specifications and providing and fixing nuts, washers, gaskets etc. complete as required
1
-
-
... More
SITC of cast Iron flanged Non returns valves :
Supplying, laying, fixing, testing and commissioning of cast iron and flanged Non return valves of PN 1.6 rating of 80mm dia conforming to relevant IS specifications and providing and fixing nuts, washers, gaskets etc. complete as required
1
-
-
... More
SITC of Foot valves :
Supplying, laying, fixing, testing and commissioning of butterfly valves of PN 1.6 rating of 100mm dia with nitrile and stainless stell stem with lever/gear operation and cast iron body in powder coasted finish for firefighting application complete in all respects as required.
1
-
-
... More
SITC of Foot valves :
Supplying, laying, fixing, testing and commissioning of butterfly valves of PN 1.6 rating of 80mm dia with nitrile and stainless steel stem with lever/gear operation and cast iron body in powder coasted finish for firefighting application complete in all respects as required.
1
-
-
... More
SITC of Brass Ball Valves :
Supplying, laying, fixing, testing and commissioning of 25 mm dia forged brass ball valves with brass body nickel coated, brass ball, hard chrome plated, suitable for firefighting complete in all respects
8
-
-
... More
SITC of Pressure Switches :
Supplying, laying, fixing, testing and commissioning of pressure switches suitable for operating with fire hydrant systems for working pressure of 14.0 kg/cm2 including electrical control wiring with suitable copper conductor PVC insulated and sheathed control cable upto panel, connections etc. complete as required.
2
-
-
... More
SITC of pressure gauge :
Supplying, laying, fixing, testing and commissioning of 100mm dia Bourden type, Stainless steel dial type pressure gauge including brass isolation valve and plpe having calibration of 0-16 Kg/cm2
3
-
-
... More
SITC Two way fire brigade Inlet :
Supply, Installation, Testing and commissioning of instantaneous two way fire brigade inlet connection conforming to relevant IS amended up to date consisting of 63 mm Gun metal Quadra plate, male inlet coupling with plug& cap, chain bends and other accessories etc. complete as required.
1
-
-
... More
SITC Fire hose :
Supply, Installation, Testing and Commissioning 100% synthetic flax canvas Non-percolating FIRE hose (Type B) ISI marked 63mm dia 25m long with stainless steel male& female couplings (ISI marked) bound & riveted to hose pipes with copper rivets and copper wire as required.
8
-
-
... More
SITC Short branch pipe :
Supply, installation, testing and commissioning gun metal 63mm dia. Short brach pipe (ISI Marked) with 20 mm dia nozzle as required
4
-
-
... More
SITC landing Valve :
Supply, installation, testing and commission of single headed gun metal ISI marked oblique pattern landing valve Type ‘A’ with 80mm dia flanged inlet & 63 mm dia instantaneous type female outlet complete with A.B.S plastic cap and chain twist release type lug and all accessories complete as required
4
-
-
... More
SITC Fire- Aid-Fire Hose reel :
Supply, Installation, testing and commissioning of First-Aid –dire. Hose reel wall mounting swing type complete with drum, bracket, 20 mm dia, 30m long high pressure hose reel tub+ B82ng with grunmetal shutoff nozzle conforming to IS: 8090-1976 the hose reel shall be as per IS:885-1985
2
-
-
... More
SITC weather proof cabinet for hose :
Supply, Installation, and commissioning of weather proof Double Door cabinet for hose fabricated out of 1.6mm thickness M.S. sheet complete with glass in front having locking arrangement, suitable to accommodate all the necessary pipes, accessories, fitting etc. including sign writing etc.
4
-
-
... More
SITC of Air Release Valve :
Supplying, laying, fixing, testing and commissioning of 25 mm dia Air Release Valves with brass body nickel coated suitable for firefighting complete in all respects.
3
-
-
... More
SITC of Air Release Valve :
supply, laying, fixing, testing and commissioning of 3 MM Pipe Wrapping Coat Sheet for Pipes complete in all respects
200
-
-
... More
SITC of Fire Alarm Panel - Conventional System :
Supply, installation, testing and commissioning of Fire Alarm System - 2 Zone conventional Micro Processor Based Main Fire Alarm Control Panel with power supply, battery backup 2 x 12 V DC, 15 AH Set.
1
-
-
... More
SITC of Fire Alarm Panel - Conventional System :
Supply, Installation, testing and commissioning of Manual Call Points
4
-
-
... More
SITC of Fire Alarm Panel - Conventional System :
Supply, Installation, testing and commissioning of hooters
4
-
-
... More
SITC of Fire Alarm Panel - Conventional System :
Supply and laying of 2 C x 1.5 sq.mm flexible FRLS Multi stand cable including accessories
200
-
-
... More
Fire Extinguishers :
Supply, installation of Co2 (Carbon Dioxide) 4.5kg Capacity Fire Extinguishers
3
-
-
... More
Fire Extinguishers :
Supply, installation of ABC (stored Pressure Type) 6 kg Capacity Fire Extinguishers
10
-
-
... More
Fire Extinguishers :
Providing and fixing of Fire Buckets Stand Set (4 Buckets) including with cost of material and labour
4
-
-
... More
Transportation Charges for Fire Fighting System
1
-
-
... More
Pump House :
Providing 20mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two levelled and finished even and smooth in (iii) cement mortar 1:3 (1 Cement, 3 Mortar)
69.25
-
-
... More
Pump House :
Providing and laying water proofing treatment in sunken portion of WCs, bathroom ,water tank etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.)
45
-
-
... More
Pump House :
Providing and laying protection coat of Cement mortar 1:4 (1cement: 4 fine sand).
11.19
-
-
... More
Pump House :
Providing and laying of Rectangular cover 455x610 mm with frame (low duty) including with cost of material and labour
1
-
-
... More
Pump House :
Providing and fixing Plumbing work of Pump House pipe and fittings including with cost of material and labour as required
1
-
-
... More
St. Thomas Church - Sub Head 29 - Landscape
-
-
-
... More
Preparing the ground with soil mix and vermicomposting manure in 2:1 proportion, dressing the ground; supply and planting of ground cover / lawn
500
-
-
... More
Preparing the ground with soil mix and vermicomposting manure in 2:1 proportion, dressing the ground; supply and planting of ground cover / lawn to attain slope
300
-
-
... More
Shrubs/ Trees :
Preparing the ground with soil mix and vermicomposting manure in 2:1 proportion, dressing the ground and planting of shrubs
85
-
-
... More
Shrubs/ Trees : Providing and Planting of Bougainvillea glabra including cost of the plant, excavation of 0.3x0.3x0.3 m pit, back filling with garden soil and farmyard manure (3:1 ratio), application of required pesticides for anti-termite treatment. Planting of 0.6 m height healthy saplings with required stacking and maintaining it for 3 year. (which is well drained soil specific, should be fully exposed to sun can be used for garden decorative purpose complete)
75
-
-
... More
Shrubs/ Trees :
Providing and Planting of Hamelia patens including cost of the plant, excavation of 0.3x0.3x0.3 m pit, back filling with garden soil and farmyard manure (3:1 ratio), application of required pesticides for anti-termite treatment. Planting of 0.6 m height healthy saplings with required stacking and maintaining it for 3 year. (which is well drained soil specific, should be fully exposed to sun can be used for garden decorative purpose complete)
75
-
-
... More
Shrubs/ Trees :
Providing and Planting of Murraya exotica including with including cost of the plant, excavation of 0.3x0.3x0.3 m pit, back filling with garden soil and farmyard manure (3:1 ratio), application of required pesticides for anti-termite treatment. Planting of 0.6 m height healthy saplings with required stacking and maintaining it for 3 year. (which is well drained soil specific, should be fully exposed to sun can be used for garden decorative purpose complete)
100
-
-
... More
Shrubs/ Trees :
Providing and Planting of Neiurm oleander including cost of the plant, excavation of 0.3x0.3x0.3 m pit, back filling with garden soil and farmyard manure (3:1 ratio), application of required pesticides for anti-termite treatment. Planting of 0.6 m height healthy saplings with required stacking and maintaining it for 3 year. (which is well drained soil specific, should be fully exposed to sun can be used for garden decorative purpose complete)
50
-
-
... More
Shrubs/ Trees :
Providing and Planting of Nerium oleander dwarf including with including cost of the plant, excavation of 0.3x0.3x0.3 m pit, back filling with garden soil and farmyard manure (3:1 ratio), application of required pesticides for anti-termite treatment. Planting of 0.6 m height healthy saplings with required stacking and maintaining it for 3 year. (which is well drained soil specific, should be fully exposed to sun can be used for garden decorative purpose complete)
75
-
-
... More
Shrubs/ Trees :
Providing and Planting of Pandanus gold dwarf including with including cost of the plant, excavation of 0.3x0.3x0.3 m pit, back filling with garden soil and farmyard manure (3:1 ratio), application of required pesticides for anti-termite treatment. Planting of 0.6 m height healthy saplings with required stacking and maintaining it for 3 year. (which is well drained soil specific, should be fully exposed to sun can be used for garden decorative purpose complete)
200
-
-
... More
Providing and Planting of Thevetia peruviana including cost of the plant, excavation of 0.3x0.3x0.3 m pit, back filling with garden soil and farmyard manure (3:1 ratio), application of required pesticides for anti-termite treatment. Planting of 0.6 m height healthy saplings with required stacking and maintaining it for 3 year. (which is well drained soil specific, should be fully exposed to sun can be used for garden decorative purpose complete)
40
-
-
... More
Providing and laying of Paspalum grass including cost of the grass, excavation & filling with garden soil including with cost of material and labour
400
-
-
... More
Providing and laying of zoyasia matt including cost of the matt, excavation & filling with garden soil including with cost of material and labour
125
-
-
... More
Plinth Steps - Hard landcape :
Providing and laying River-washed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 25 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge
616
-
-
... More
Paved Areas & Passage :
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos / Lindane E.C. 20% with 1% concentration
796.12
-
-
... More
Paved Areas & Passage :
Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge.
796.12
-
-
... More
Paved Areas & Passage :
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge
334
-
-
... More
Paved Areas & Passage :
Providing and laying Paver Cobble Rajula Stones 75 mm thickness ( of 10x10,14x14 or 20x14 cm) sizes as per design over 1:3 cement mortar (1 cement : 3 graded medium coarse sand) bedding of average 50mm thickness, floated with thick and neat cement paste with consumption of cement @4.4kg/ sqm and 2 kg /sqm for joints mixed with approved pigment to match the shade of the stone including dressing, rubbing, curing, rounded edges, wedge, tapering, cleaning etc. complete with no more than 15mm floor top level variation (the rate shall be for different patterns and details provided by the Architect. No extra amount will be paid for residues to be used to achieve the pattern). All sides of stone to be 25mm deep machine cut to achieve best edge quality and as design.
462.36
-
-
... More
Paved Areas & Passage :
Providing and laying at or near ground level Rajula kerb stone of size 600X300X150 mm in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves as per approved pattern and setting in position complete etc. as per direction of Engineer-in-charge
7.9
-
-
... More
St. Thomas Church - Sub Head 30 - Gabion Furniture landscape seating to be designed (existing seating to be Discarded)
-
-
-
... More
Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12(D=100 mm with tolerance of ±2%), Zinic+10% Al alloy +PVC coated, Mesh wire diameter 2.7/3.7mm (ID/OD), mechanically edged/ selvedge with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(ID/OD), supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per directions of Engineer-in-charge.
2.51
-
-
... More
Supply and installation of Wood Plastic Composite size of plank 4 ft x 8 ft mm. including with cost of material and labour
8
-
-
... More
Providing and fixing of Victoria Bench – with FRP & Cast iron with powder coating. Length : 4 Ft including with cost of material and labour
15
-
-
... More
Providing and fixing of Ms Gate 2mx2.5m as per approved drawing including cost of material and labour
1
-
-
... More
Providing and fixing of Access ramp 3.5Mx2m as per approved drawing including with cost of material and labour
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements