Cleaning Tenders

Description: Condemned Civil Structure Consisting Of 1] Cond. Qtr No. 109, 8 Unit, 2] Cond. Qtr No. 115, 6 Unit, 3] Cond. Qtr No. 58a, 20 Unit, 4] Cond. Qtr No. 57, 28 Unit, 5] Cond. Qtr No. 58, 24 Unit, 6] Cond. Qtr No. 39, 10 Unit, 7] Cond. Qtr No. 59b, 20 Unit, Total 116 Units, Total Qty- 01 By Lot. Free Delivery Period [fdp] For This Lot Has Been Fixed As 80 [eighty] Days. Above Mentioned Condemned Structure Are Offered Excluding Common Wall Of Adjacent Another Unit And Boundary Wall If Any Which Has Not Been Offered Or Sold . Therefore Such Type Of Cases Should Be Dealt With Proper Care During Dismantling So That Adjacent Unoffered And Unsold Unit Are Not Damage Or Broken In Any Way. Condition-1] Before Bidding Purchaser Are Invariably Advised To See The Lot And Also Check Whether Any Unit Of The Offered Lot Is Occupied In Any Way. If Found Occupied , In That Case It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office [ I.e. Sr.dmm/hwh ] In Writting At Least 24 Hours Prior To The Start Of Auction For Taking Further Necessary Action. 2] No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale Is Completed. 3] The Sold Lot Will Be Handed Over To The Purchaser In Presence Of Concerned Custodian , Isa-sv, Rpf, Cdms And Other Personnel As The Case May Be , 4] Dismantling Work Of Sold Structure Is To Be Done By The Purchaser On His Own Arrangement By Providing Tools, Safety Gears, Machinery And Labour Required For The Purpose. 5] Purchaser Should Ensure To Keep A Safety Banner Around The Work Spot. 6] Any Loss / Damage That May Arise During Dismantling Work Due To Accident Etc, Shall Be The Sole Responsibility Of The Purchaser And No Claim On This Account Will Be Entertained By The Railways Under Any Circumstances, 7] Dismantling Of The Sold Lot Is Allowed Only Up To The Ground Level Of The Condemned Structures. 8] Dismantling Of The Condemned Structures [sold Lot] Will Take Place In Presence Of Engg. Officials. 9] Purchaser Shall Ensure That Dismantling Work Does Not Affect Or Endanger Safety Of Life And Railway Property In Near Vicinity.10] No Explosives Can Be Used For Demolishing, 11] Custodian / Engg. Official Has To Ensure That Debris Arisen Out Of Dismantling To Be Cleared By Purchaser In Proportion Of Delivery Of Released Materials And He Will Invariably Certify In Sale Completion Report That All Debris/waste Etc. Generated Has Been Cleared By Purchaser And The Land Is Made Clean, Clear And Level For Further Use.

Description: 12261ms24i, 98050011, Quantity- 17.320 Mts. Scrap Condemned Unserviceable Ms Bed Plates, Water Tanks And Water Tank Cut Pieces, Ms Path Plates, Foot Path Plates, Sheets, Bin Cut Parts, Rack And Roller Path, Air Tank Cover Parts, Striker Casting Wear Plates, Sliding Doors, Swing Doors, Flap Doors, Ms Chequered Plates, Expansion Tank Parts, Ms Plates, Plate Cuttings, Wagon Doors, Dsl Engine Long Hood, Dummy Bogie Cut Parts, Cast Iron Surface Plates And Base Plates, Axle Counter Ms Frames, Baking Oven Cut Pieces, Ocb Duct, Welding Machine Outer Body, Inverter Empty Body, Tap Changer Ms Spares And Empty Body, Manipulator, Shaping Machine Ms Body, Ms Gates, Collapsible Gates, Base Plate, Short Hood Cabin Cut Parts, Tables, Racks, Lavatory Chute Brackets, Ms Travelling Base, Ms Danger Boards, Radiator Ms Spares, Ms Die Blocks, Ms Body Of Radiator Fan Motor, Capacitor Ms Body, Auxiliary Transformer Ms Empty Body, Ducts, Dust Bin Stand, Ht Load Brake Switch Body, Ms Transformer Body, Ventilator Motor Frames, Transformer Top Plate, Air Receiver, Storage Box Cut Parts, Coach Body Parts, Dust Bins, Lockers, Cattle Guard, Incinerator Chimney Parts, Incinerator Oven, Incinerator Cut Parts, Boxes, Wagon Doors Cut Pieces, Wagon Bfr End Plates And Cut Pieces, Ms Fuel Tanks [fire Prone], Boiler Tank Cut Pieces, Angles, Girder, Sheets Cut Pieces, Portable Stands, Channels ,fabricated Structures And Other Corroded Heavy Melting Scrap Of Different Thickness Of Sorts And Sizes, With Or Without Attachments. Note- 1. Gas Cutting Permitted For The Purpose Of Loading Only. 2. It Is The Responsibility Of The Purchaser To Ensure That Fuel Tanks To Be Filled With Water And Cleaned Thoroughly Free From Flammable Substances Before Cutting To Avoid Explosion Or Any Casualties. 3. Private Crane Permitted For Loading. Special Note- Gas Cutting For Fuel Tank Should Be Done In Open Area [cutting Must Be Kept Clear And Free Of Flammables] And Away From Bins [free From Recognized Hazards That Are Causing Or Are Likely To Cause Serious Harm] And Should Follow Fire-prevention And Fire-protection Measures. Location- [bin No- 261, Left Side Of Road No- 2]. Hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery As Per Mv Act 1988

Description: CATEGORY: EP3091B 03172901-165PACKING FOR BREATHER , EP3091B 1158700GASKET FOR AIR CLEANER , EP3091B- 3168400GASKET FOR FUEL PUMP , EP3091B-3172 900GASKET FOR BREATHER PIPE , EP3091B 317450OGASKET FOR TIMING GEAR , EP3091B 3199200GASKET FOR BEARING FLANGE , EP3091B- 3204200GASKET TOP CYLINDER HEAD COVER , EP3091B- 40007300FUEL FILTER ELEMENT , EP3091B-400217000 RING FOR DIP STICK , EP3091B 400232000 RING 31X40X4 POINT 5 FOR PROTECTION , EP3091B-40032701FUEL TANK CAP , EP3091B-40034100OIL SEAL 50X65 X8 , EP3091B 40034700OIL SEAL 70X85X8 , EP3091B-3064402PLUG FOR OIL FILTER HOUSING , EP3091B-3169103DARIN PLUG , EP3091B-3171700PLAIN WASHER DISC COLLAR , EP3091B 3183000COLLAR NUT , EP3091B 40050200-00 CIRCLIP 9 CBC DE COMP , EP3091B-50001100JOINT WASHER M-12 , EP3091B-50001200JOINT WASHER M-14 , EP30918- 50001500JOINT WASHER M-A 21X26 , EP3091B- 50019400CIRCLIP FOR GOVERNER SPINDLE LEVER , EP3091B-50022900HEX NUT M8 , EP3091B-50133800 O RING 23 X29X3 FOR CAP SCREW , EP3091B-50222900 O RING 100X108X4 , EP3091B 50257110FUEL INJECTION PUMP , EP3091B-50257210 INJECTOR ASSEMBLY , EP3091B- 80401978DELIVERY VALVE , EP3091B-80401981ELEMENT , EP3091B-805500VENT VALVE , EP3091B-40033800OIL SEAL 53 X47 X7 , EP3091B-49038000PACKING FOR AIR FILTER , EP3091B 50019500-00CIRCLIP 12X1 DIN 471 FOR CAM FOLLOWER SPI , EP3091B 50020800 CIRCLIP 30X1 POINT 2 , EP3091B-50128200INJECTOR FLANGE WASHER , EP3091B 50013000BALL BEARING 6007 , EP3091B-50014200BALL BEADING 6206 , EP3091B-50015300BALL BEARING 16014 , ES6015D-1001162SEALING RING 90X110X13

Description: CATEGORY: Filter engine oil 60034226 , Fuel filter 60208878 , Fuel Filter 60208879 , Diesel Fuel cleaner FS B222100000751 , Oil suction filter 60200364 , Air filter with lockerPFG2-BSSY 60193268 , AUXILIARY CARTRIDGE A222100000599 , AIR MASTER FILTER A222100000600 , ELECTROMAGNETIC REVERSE VALVE 21011660 , COIL B249900000689 , CHANGE VALVE-DG4V-3-2A-M-U B220400000079 , B240700000472 RELAY 056700-8170 , B240700000473 RELAY 056800-3060 , RELAY-4RD-007-903-021 21003566 , Master switch of power supply 60125384 , DC CONTACTOR MZJ- 50A 006 21004310 , ROPE CLAMP A219900000037 , COUPLING PIN-I XZ150.1.3A-2 10082813 , PULLEY- Q150.60.2-2 21003391 , BEARING-NJ1024GB283 21003164 , OIL NIPPLE A210804000002 , SWITCH ASSEMBLY A2B 60083173 , QUICK CONNECTOR A229900006322 , QUICK CONNECTOR A229900006321 , QUICK ADAPTOR B229900003313 , FEMALE QUICK COUPLING B229900003543 , MALE QUICK CONNECTOR 60100274 , FEMALE QUICK CONNECTOR 60100273 , BELT 60034238 , DENTIFORM BELT XPA1180 A230106000394 , THIRTY ONE TILTSENSOR ASSY A810299000932 , FUEL SENSOR 60206737 , PRESSURE MEASURING ADAPTOR B210770000083 , PRESSURE MEASURING JOINT B210780001748 , EP220 GEAR OIL 50LTR SLSP00002P4 , COOLANT 10L A429900000195P1 , HEAVY DUTY GREASE 18KG 60058034P1 , ALARM LIGHT 60114539 , SIGNAL LAMP ASSEMBLY KT43-6210Y 60016932 , KEY SWITCH XB2-BG61 B241200000484 , BUZZER 60061039 , ALARM LIGHT 60220899 , OBLIQUITY SENSOR 60159795 , ELECTROMAGNETIC REVERSING VALVE 60060839 , PROPRNL PRESSURE-REDUCING VALVE 60065222 , CONNECT 60118612 , LEVER CONTROL DEVICE 10183944 , ELECTRIC OPERATION HANDLE ASSY 60345994 , PEDEAL ELECTRONIC THROTTLE 60018079FC , STARTER MOTOR 60209557 , GENERATOR 60281067 , ANEMOMETER 12835019 , ALARM LAMP 60114540 , ASSEMBLY SENSOR ANGLE 11442964 , Oil Return Filter 60010514 , ELECTROMAGNETIC VALVE BODY 60313036 , DC Contactor A240700000339 , COIL 60263974 , PRESSURE SENSOR 140502000198B , PRESSURE SENSOR 140502000185B , PULLING FORCE SENSOR 60167211 , LIFT HEIGHT LIMIT SWITCH 12889713 , TRACK PAD CRAWLER , ENGINE OIL- 60024666P2 , AC BY PASS-B222100000660K , AC MAIN FILTER-B222100000711K , HYDRAULIC OIL 210L B420106000017P3

Description: CATEGORY: Elite 580 Diluent , ELITE 580 LYSE I 3x500ml , ELITE 580 LYSE II 3x500ml , ELITE 580 LYSE III 3x1000ml , Elite 580 Control H N L , ELITE H CLEAN 4x50ml , Calibrator Elite 580 , Glucose XL System Pack 10x44ml , UREA XL System Pack 5x44ml , Creatnine XL System Pack 5x44ml , Uric Acid XL System Pack 5x44ml , Chloride XL System Pack 10x12ml , Cholesterol XL System Pack 10x44ml , Triglycerides XL System Pack 5x44ml , HDL XL System Pack 4x30ml , Total Bilirubin XL System Pack 6x44ml , Direct Bilirubin XL System Pack 6x44ml , Protein XL System Pack 10x44ml , Albumin XL System Pack 10x44ml , SGOT XL System Pack 6x44ml , SGPT XL System Pack 6x44ml , Alkaline Phosphates XL System Pack 2x44ml , Amylase XL System Pack 5x22ml , Lipase XL System Pack 1x44ml , CKMB XL System Pack 2x44ml , CKNAC XL System Pack 2x44ml , HbA1C with Cali Set XL System Pack 2x15ml , FERRRITIN 2x14.5ml , FERRITIN Calibrator 1x1ml , FERRITIN Control 1x1ml High , FERRITIN Control 1x1ml Low , XL CRP WITH CALI 2x22ml , XL ASO WITH CALI 1x22ml , XL RF WITH CALI 1x22ml , ERBA Auto Wash System Xl System Pack 10x100ml , ERBA NORM 4x5ml , ERBA PATH 4x5ml , XL AUTOWASH AC AL KIT 5x44ml , XL MULTICAL 4x3ml , Erba Protime LS 2 x5 ml , Erba Actime LS 6x5ml , Estimation of PT pack of 5 ml

Description: BOQ ITEMS: Supply of 19 mm thick class O nitrile rubber insulation size-1.2mtrX10mtr,Aluminum foil pasting, Supply of 19 mm thick class O nitrile rubber insulation size-1.2mtrX10mtr,Without aluminum foil pasting, Supply of 6 mm thick class O without foil pasting nitrile rubber insulation, Supply of ball valve, CI, Lever operated, PN 16,25 mm dia., Supply of ball valve, CI, Lever operated, PN 16,32 mm dia., Supply of ball valve, CI, Lever operated, PN 16,40 mm dia., Industrial grade Adhesive for nitrile rubber insulation, 50 mm wide 3 mm thick nitrle rubber insulation tape, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.size-50, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance Size A-35, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance Size A-28, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.size A-29, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-62, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-36, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-38, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-57, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-53, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-47, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-23, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-46, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-42, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-43, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-49, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-52, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-45, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-60, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-27, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-51, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-37, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-39, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-40, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-31, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.B-61, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.B-64, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.B-48, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-33, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.B-50, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-26, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-34, Aluminum ladder-Foldable, rust free, Heavy duty, durable, safe stepping,Size-8 ft, Aluminum ladder-Foldable, rust free, Heavy duty, durable, safe stepping,Size-10 ft, Synthetic gear oil for Cooling Tower, Lag coating for AC ducting insulation Temperature-80 Deg.C,30 Ltr Drum, Wheel bearing Grease, AHU TEFC drive motor (EF1 efficiency) ,1.1KW,1410 RPM, AHU TEFC drive motor (EF1 efficiency) ,2.2 KW 1450 RPM, AHU TEFC drive motor (EF1 efficiency) ,3.7 KW 1450 RPM, AHU TEFC drive motor (EF1 efficiency) ,5.5 KW 1450 RPM, PVC Service brush for copper pipe cleaning, Masonry Drill bit HSS, Size 1 to10mm 10 Pcs set, Polyurethane foam sheet density 36 to 40 kg per Cubic meter, Steel Screw Driver, CRC 2-26,500 ML can,metal application

Description: BOQ ITEMS: Inj Lignocaine HCl 2% without adrenaline vial of 30 ml, Lignocaine Hcl Inj 2 percentage Solution With Adrenaline 1 80000 In 2ml Cartridge Pkt Of 50, Electrolyte Solution bott of 05 litre for Disinfectant Generating System, Dycal calcium hydroxide pkt of two tubes, Antiseptic mouth wash containing Sodium Fluoride and Triclosan Bottle of 100 ML, Gel for root canal preparation containing water soluble lubricant EDTA, Urea, Hydrogen peroxide tube of 3.5 gm, Clove Oil bottle of 50 Ml, Desensitizing Paste (Stannous Fluoride /Potassium Nitrate / Sodium Mono fluorophosphates)tube of 50 gm, Chlorohexidine Mouth wash 0.2% bott of 100 ML, Post Extraction Dressing (alveogyl), Pulp Devitalizer non arsenic (CAUSTINERF FORTE), Triamcinolone acetonide 0.1% for oral use tube of 5 gm, Periodontal pack (non eugenol) two paste system, Sodium hypochlorite 5% bott of 500 ml, Sterillium bott of 500 ml, Cetrimide & Chlorhexidine gluconate bott of 01 ltr, Spirit (Alcohol) bott of 500 ml for spirit lamp, Hydrogen peroxide solution bott of 500 ml, Paraformaldehyde Tab pkt of 100, Povidone iodine 5% bott of 100 Ml, Dextrose Monohydrate for oral use pack of 100 gm, Gelatin sponge, Disposable Gown, Shoe cover disposable pkt of 100, Sugical gloves size 8, Knife BP handle No 10 Pkt of 6, Knife BP handle No 11 Pkt of 6, Knife BP handle No 12 Pkt of 6, Knife BP handle No 15 pkt of 6, Syringe disposable 2 ml pkt of 100, Syringe disposable 5 ml pkt of 100, Syringe disposable 10 ml pkt of 100, Diamond bur round for airotor pkt of 05, Diamond bur inverted cone for airotor pkt of 05, Diamond bur straight for airotor pkt of 05, Antiseptic pain relieving gel for dental tube of 15 gm/m, Cloth glass polishing (Bleached Calico cotton white) 1X1/2 metres, Denture adhesive powder bottle of 10-15gm, Bite registeration paste silicone based set of two cart of 48-50ml each, Lubricant spray bott of 300 ml, Cloth Napkin absorbant dental disposable 15x15cm pkt of 500, Plaster of Paris special Dental-Grade 1pkt of 01 kg, Articulating paper, Patient bib plastic, Sintered Diamond burs for grinding metal for SHP assorted, Suction cleaning solution bott of 1 ltr, MTA based root canal sealer pack of 2-3gm, Cold mould seal bott of 500 ml, Crown and bridge polishing compound for NP alloys 200gm cake, Crown and bridge polishing emery for NP alloys grain size 120microns 50m roll, Disc, abrasive rubber wheel for polishing metal, pkt of 100, Dental stone pkt of 01 kg, Pumice powder superfine bag of 1 kg, Self-cure acrylic powder pink shade bott of 110gm with rapid repair liquid 110ml, Self-cure acrylic powder clear shade bott of 110gm with rapid repair liquid 110ml, Wheel wool polishing, Oral surgical bur straight for SHP, Spray anaesthetic surface bott of 100ml, Syringe hypodermic cartridge type needle 22mm long presterilized disposable pkt of 100 for, Syringe hypodermic cartridge type needle 35 mm long presterlised disposable pkt of 100, Polishing cup rubber, mounted soft for RAHP pkt of 12, Impression alginate material pkt of 450 gms, Paste Impression pkt of two tubes containing ZnO Base125-165 gm & catalyst, Die stone pkt of 100 gm, Crown preparation Kit containing 14-16 points, Elastomeric impression material pkt of light body, Broach nerve canal barbed assorted size pkt of 12, Dental nano composite restorative kit photo cure complete, Flowable light-cure Composite kit, GP Point 2% 15 To 40, GP Point 4% 15 To 40, Hand Niti File assorted length 21 mm, Light cure Calcium hydroxide, De-soft denture relining material, Medicament root canal formocresol-bott of 5ml, Sodium hypochlorite 2%, Matrix retainer SS (Ivory pattern) Band for, pkt of 12, Outfit Matrix SS (Siqveland) bands narrow for, Paper Point assorted 15 To 40, Root canal sealer paste for obturation containing two tubes/preloaded syringes, Self-Etching Bonding system, Mineral trioxide aggregate MTA) pkt of 1 gm, Rotary NiTi file assorted size Sx F3 length 21 mm, Rotary NiTi file assorted size Sx F3 length 25 mm, Endodontic access burs-set of 06, K files stainless steel size No 8 length 25 mm set of 6, K files stainless steel size No.10 length 25 mm set of 6, K files stainless steel length 25 mm size no 15-40, K files stainless steel length 25 mm size no 45-80 set of 6, H file stainless steel Size No 15-40 , length 21 mm set of 06, H file stainless steel Size No 45-80, length 21 mm set of 06, GP solvent-bott of 10 ml, Gauze Ribbon Absorbant Folded 2.5 Cm X 100 Meters, Pad abdominal swab 40x25cm, Pad, cotton wool, dental box of 100, Wool cotton rolls absorbent size dental pkt of 100, Nitrile gloves size small pkt of 50 pair, Nitrile gloves size medium pkt of 50 pair, Nitrile gloves size large pkt of 50 pair, Bioresorbable demineralized bone graft substitute 0.5-1cc freeze-dried bone 0.20-0.25gm x 2 vial (Dental bone graft), Dentin replacement material consisting of calcium silicate based powder & calcium chloride liquid in box of 5 capsules & 5 liquid tubes (Biodentine), Interdental Brush Pkt of 05, Dental Floss, Zirconomer restorative material, Gum Paint

Description: BOQ ITEMS: Inj Lignocaine HCl 2% without adrenaline vial of 30 ml, Lignocaine Hcl Inj 2 percentage Solution With Adrenaline 1 80000 In 2ml Cartridge Pkt Of 50, Electrolyte Solution bott of 05 litre for Disinfectant Generating System, Dycal calcium hydroxide pkt of two tubes, Antiseptic mouth wash containing Sodium Fluoride and Triclosan Bottle of 100 ML, Gel for root canal preparation containing water soluble lubricant EDTA, Urea, Hydrogen peroxide tube of 3.5 gm, Clove Oil bottle of 50 Ml, Desensitizing Paste (Stannous Fluoride /Potassium Nitrate / Sodium Mono fluorophosphates)tube of 50 gm, Chlorohexidine Mouth wash 0.2% bott of 100 ML, Post Extraction Dressing (alveogyl), Pulp Devitalizer non arsenic (CAUSTINERF FORTE), Triamcinolone acetonide 0.1% for oral use tube of 5 gm, Periodontal pack (non eugenol) two paste system, Sodium hypochlorite 5% bott of 500 ml, Sterillium bott of 500 ml, Cetrimide & Chlorhexidine gluconate bott of 01 ltr, Spirit (Alcohol) bott of 500 ml for spirit lamp, Hydrogen peroxide solution bott of 500 ml, Paraformaldehyde Tab pkt of 100, Povidone iodine 5% bott of 100 Ml, Dextrose Monohydrate for oral use pack of 100 gm, Gelatin sponge, Disposable Gown, Shoe cover disposable pkt of 100, Sugical gloves size 8, Knife BP handle No 10 Pkt of 6, Knife BP handle No 11 Pkt of 6, Knife BP handle No 12 Pkt of 6, Knife BP handle No 15 pkt of 6, Syringe disposable 2 ml pkt of 100, Syringe disposable 5 ml pkt of 100, Syringe disposable 10 ml pkt of 100, Diamond bur round for airotor pkt of 05, Diamond bur inverted cone for airotor pkt of 05, Diamond bur straight for airotor pkt of 05, Antiseptic pain relieving gel for dental tube of 15 gm/m, Cloth glass polishing (Bleached Calico cotton white) 1X1/2 metres, Denture adhesive powder bottle of 10-15gm, Bite registeration paste silicone based set of two cart of 48-50ml each, Lubricant spray bott of 300 ml, Cloth Napkin absorbant dental disposable 15x15cm pkt of 500, Plaster of Paris special Dental-Grade 1pkt of 01 kg, Articulating paper, Patient bib plastic, Sintered Diamond burs for grinding metal for SHP assorted, Suction cleaning solution bott of 1 ltr, MTA based root canal sealer pack of 2-3gm, Cold mould seal bott of 500 ml, Crown and bridge polishing compound for NP alloys 200gm cake, Crown and bridge polishing emery for NP alloys grain size 120microns 50m roll, Disc, abrasive rubber wheel for polishing metal, pkt of 100, Dental stone pkt of 01 kg, Pumice powder superfine bag of 1 kg, Self-cure acrylic powder pink shade bott of 110gm with rapid repair liquid 110ml, Self-cure acrylic powder clear shade bott of 110gm with rapid repair liquid 110ml, Wheel wool polishing, Oral surgical bur straight for SHP, Spray anaesthetic surface bott of 100ml, Syringe hypodermic cartridge type needle 22mm long presterilized disposable pkt of 100 for, Syringe hypodermic cartridge type needle 35 mm long presterlised disposable pkt of 100, Polishing cup rubber, mounted soft for RAHP pkt of 12, Impression alginate material pkt of 450 gms, Paste Impression pkt of two tubes containing ZnO Base125-165 gm & catalyst, Die stone pkt of 100 gm, Crown preparation Kit containing 14-16 points, Elastomeric impression material pkt of light body, Broach nerve canal barbed assorted size pkt of 12, Dental nano composite restorative kit photo cure complete, Flowable light-cure Composite kit, GP Point 2% 15 To 40, GP Point 4% 15 To 40, Hand Niti File assorted length 21 mm, Light cure Calcium hydroxide, De-soft denture relining material, Medicament root canal formocresol-bott of 5ml, Sodium hypochlorite 2%, Matrix retainer SS (Ivory pattern) Band for, pkt of 12, Outfit Matrix SS (Siqveland) bands narrow for, Paper Point assorted 15 To 40, Root canal sealer paste for obturation containing two tubes/preloaded syringes, Self-Etching Bonding system, Mineral trioxide aggregate MTA) pkt of 1 gm, Rotary NiTi file assorted size Sx F3 length 21 mm, Rotary NiTi file assorted size Sx F3 length 25 mm, Endodontic access burs-set of 06, K files stainless steel size No 8 length 25 mm set of 6, K files stainless steel size No.10 length 25 mm set of 6, K files stainless steel length 25 mm size no 15-40, K files stainless steel length 25 mm size no 45-80 set of 6, H file stainless steel Size No 15-40 , length 21 mm set of 06, H file stainless steel Size No 45-80, length 21 mm set of 06, GP solvent-bott of 10 ml, Gauze Ribbon Absorbant Folded 2.5 Cm X 100 Meters, Pad abdominal swab 40x25cm, Pad, cotton wool, dental box of 100, Wool cotton rolls absorbent size dental pkt of 100, Nitrile gloves size small pkt of 50 pair, Nitrile gloves size medium pkt of 50 pair, Nitrile gloves size large pkt of 50 pair, Bioresorbable demineralized bone graft substitute 0.5-1cc freeze-dried bone 0.20-0.25gm x 2 vial (Dental bone graft), Dentin replacement material consisting of calcium silicate based powder & calcium chloride liquid in box of 5 capsules & 5 liquid tubes (Biodentine), Interdental Brush Pkt of 05, Dental Floss, Zirconomer restorative material, Gum Paint

Description: Condemned Civil Structure Consisting Of 1] Cond. Qtr No. 108, 8 Unit, 2] Cond. Qtr No. 114, 3 Unit, 3] Cond. Qtr No. 266, 4 Unit, 4] Cond. Qtr No. 268, 1 Unit, 5] Cond. Qtr No. 203, 8 Unit, 6] Cond. Qtr No. 283, 2 Unit, 7] Cond. Qtr No. 317, 4 Unit, 8] Cond. Qtr No. 318, 2 Unit, 9] Cond. Qtr No. 320, 2 Unit, 10] Cond. Qtr No. 321, 4 Unit, 11] Cond. Qtr No. 92, 3 Unit, 12] Cond. Qtr No. 284, 4 Unit, 13] Cond. Qtr No. 213, 2 Unit, 14] Cond. Qtr No. 170, 3 Unit, Total 50 Units, Total Qty- 01 By Lot. Free Delivery Period [fdp] For This Lot Has Been Fixed As 80 [eighty] Days. Above Mentioned Condemned Structure Are Offered Excluding Common Wall Of Adjacent Another Unit And Boundary Wall If Any Which Has Not Been Offered Or Sold . Therefore Such Type Of Cases Should Be Dealt With Proper Care During Dismantling So That Adjacent Unoffered And Unsold Unit Are Not Damage Or Broken In Any Way. Condition-1] Before Bidding Purchaser Are Invariably Advised To See The Lot And Also Check Whether Any Unit Of The Offered Lot Is Occupied In Any Way. If Found Occupied , In That Case It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office [ I.e. Sr.dmm/hwh ] In Writting At Least 24 Hours Prior To The Start Of Auction For Taking Further Necessary Action. 2] No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale Is Completed. 3] The Sold Lot Will Be Handed Over To The Purchaser In Presence Of Concerned Custodian , Isa-sv, Rpf, Cdms And Other Personnel As The Case May Be , 4] Dismantling Work Of Sold Structure Is To Be Done By The Purchaser On His Own Arrangement By Providing Tools, Safety Gears, Machinery And Labour Required For The Purpose. 5] Purchaser Should Ensure To Keep A Safety Banner Around The Work Spot. 6] Any Loss / Damage That May Arise During Dismantling Work Due To Accident Etc, Shall Be The Sole Responsibility Of The Purchaser And No Claim On This Account Will Be Entertained By The Railways Under Any Circumstances, 7] Dismantling Of The Sold Lot Is Allowed Only Up To The Ground Level Of The Condemned Structures. 8] Dismantling Of The Condemned Structures [sold Lot] Will Take Place In Presence Of Engg. Officials. 9] Purchaser Shall Ensure That Dismantling Work Does Not Affect Or Endanger Safety Of Life And Railway Property In Near Vicinity.10] No Explosives Can Be Used For Demolishing, 11] Custodian / Engg. Official Has To Ensure That Debris Arisen Out Of Dismantling To Be Cleared By Purchaser In Proportion Of Delivery Of Released Materials And He Will Invariably Certify In Sale Completion Report That All Debris/waste Etc. Generated Has Been Cleared By Purchaser And The Land Is Made Clean, Clear And Level For Further Use.

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm2 16867 With Available Items [refer Enclosure For The Approximate Weight And Material Composition].location-available At Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc. Custodian-sse/diesel/goc.re-claimable Items [1] Wheel Set Complete [msu Tubes, Gear Wheel And Axle Boxes With Bearings]-6 Sets. [2] Lubricating Oil Cooler [ptloc] - 1no. S.1539 No.124441 Dt.01.10.2024. Note-[1] Delivery To Be Made On As Is Where Is And Lot Basis. [2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane,only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot.special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property. [8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery, Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean,free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12] The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc)