Cleaning Tenders

Description: BOQ ITEMS: Inj Lignocaine HCl 2% without adrenaline vial of 30 ml, Lignocaine Hcl Inj 2 percentage Solution With Adrenaline 1 80000 In 2ml Cartridge Pkt Of 50, Electrolyte Solution bott of 05 litre for Disinfectant Generating System, Dycal calcium hydroxide pkt of two tubes, Antiseptic mouth wash containing Sodium Fluoride and Triclosan Bottle of 100 ML, Gel for root canal preparation containing water soluble lubricant EDTA, Urea, Hydrogen peroxide tube of 3.5 gm, Clove Oil bottle of 50 Ml, Desensitizing Paste (Stannous Fluoride /Potassium Nitrate / Sodium Mono fluorophosphates)tube of 50 gm, Chlorohexidine Mouth wash 0.2% bott of 100 ML, Post Extraction Dressing (alveogyl), Pulp Devitalizer non arsenic (CAUSTINERF FORTE), Triamcinolone acetonide 0.1% for oral use tube of 5 gm, Periodontal pack (non eugenol) two paste system, Sodium hypochlorite 5% bott of 500 ml, Sterillium bott of 500 ml, Cetrimide & Chlorhexidine gluconate bott of 01 ltr, Spirit (Alcohol) bott of 500 ml for spirit lamp, Hydrogen peroxide solution bott of 500 ml, Paraformaldehyde Tab pkt of 100, Povidone iodine 5% bott of 100 Ml, Dextrose Monohydrate for oral use pack of 100 gm, Gelatin sponge, Disposable Gown, Shoe cover disposable pkt of 100, Sugical gloves size 8, Knife BP handle No 10 Pkt of 6, Knife BP handle No 11 Pkt of 6, Knife BP handle No 12 Pkt of 6, Knife BP handle No 15 pkt of 6, Syringe disposable 2 ml pkt of 100, Syringe disposable 5 ml pkt of 100, Syringe disposable 10 ml pkt of 100, Diamond bur round for airotor pkt of 05, Diamond bur inverted cone for airotor pkt of 05, Diamond bur straight for airotor pkt of 05, Antiseptic pain relieving gel for dental tube of 15 gm/m, Cloth glass polishing (Bleached Calico cotton white) 1X1/2 metres, Denture adhesive powder bottle of 10-15gm, Bite registeration paste silicone based set of two cart of 48-50ml each, Lubricant spray bott of 300 ml, Cloth Napkin absorbant dental disposable 15x15cm pkt of 500, Plaster of Paris special Dental-Grade 1pkt of 01 kg, Articulating paper, Patient bib plastic, Sintered Diamond burs for grinding metal for SHP assorted, Suction cleaning solution bott of 1 ltr, MTA based root canal sealer pack of 2-3gm, Cold mould seal bott of 500 ml, Crown and bridge polishing compound for NP alloys 200gm cake, Crown and bridge polishing emery for NP alloys grain size 120microns 50m roll, Disc, abrasive rubber wheel for polishing metal, pkt of 100, Dental stone pkt of 01 kg, Pumice powder superfine bag of 1 kg, Self-cure acrylic powder pink shade bott of 110gm with rapid repair liquid 110ml, Self-cure acrylic powder clear shade bott of 110gm with rapid repair liquid 110ml, Wheel wool polishing, Oral surgical bur straight for SHP, Spray anaesthetic surface bott of 100ml, Syringe hypodermic cartridge type needle 22mm long presterilized disposable pkt of 100 for, Syringe hypodermic cartridge type needle 35 mm long presterlised disposable pkt of 100, Polishing cup rubber, mounted soft for RAHP pkt of 12, Impression alginate material pkt of 450 gms, Paste Impression pkt of two tubes containing ZnO Base125-165 gm & catalyst, Die stone pkt of 100 gm, Crown preparation Kit containing 14-16 points, Elastomeric impression material pkt of light body, Broach nerve canal barbed assorted size pkt of 12, Dental nano composite restorative kit photo cure complete, Flowable light-cure Composite kit, GP Point 2% 15 To 40, GP Point 4% 15 To 40, Hand Niti File assorted length 21 mm, Light cure Calcium hydroxide, De-soft denture relining material, Medicament root canal formocresol-bott of 5ml, Sodium hypochlorite 2%, Matrix retainer SS (Ivory pattern) Band for, pkt of 12, Outfit Matrix SS (Siqveland) bands narrow for, Paper Point assorted 15 To 40, Root canal sealer paste for obturation containing two tubes/preloaded syringes, Self-Etching Bonding system, Mineral trioxide aggregate MTA) pkt of 1 gm, Rotary NiTi file assorted size Sx F3 length 21 mm, Rotary NiTi file assorted size Sx F3 length 25 mm, Endodontic access burs-set of 06, K files stainless steel size No 8 length 25 mm set of 6, K files stainless steel size No.10 length 25 mm set of 6, K files stainless steel length 25 mm size no 15-40, K files stainless steel length 25 mm size no 45-80 set of 6, H file stainless steel Size No 15-40 , length 21 mm set of 06, H file stainless steel Size No 45-80, length 21 mm set of 06, GP solvent-bott of 10 ml, Gauze Ribbon Absorbant Folded 2.5 Cm X 100 Meters, Pad abdominal swab 40x25cm, Pad, cotton wool, dental box of 100, Wool cotton rolls absorbent size dental pkt of 100, Nitrile gloves size small pkt of 50 pair, Nitrile gloves size medium pkt of 50 pair, Nitrile gloves size large pkt of 50 pair, Bioresorbable demineralized bone graft substitute 0.5-1cc freeze-dried bone 0.20-0.25gm x 2 vial (Dental bone graft), Dentin replacement material consisting of calcium silicate based powder & calcium chloride liquid in box of 5 capsules & 5 liquid tubes (Biodentine), Interdental Brush Pkt of 05, Dental Floss, Zirconomer restorative material, Gum Paint

Description: BOQ ITEMS: Supply of 19 mm thick class O nitrile rubber insulation size-1.2mtrX10mtr,Aluminum foil pasting, Supply of 19 mm thick class O nitrile rubber insulation size-1.2mtrX10mtr,Without aluminum foil pasting, Supply of 6 mm thick class O without foil pasting nitrile rubber insulation, Supply of ball valve, CI, Lever operated, PN 16,25 mm dia., Supply of ball valve, CI, Lever operated, PN 16,32 mm dia., Supply of ball valve, CI, Lever operated, PN 16,40 mm dia., Industrial grade Adhesive for nitrile rubber insulation, 50 mm wide 3 mm thick nitrle rubber insulation tape, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.size-50, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance Size A-35, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance Size A-28, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.size A-29, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-62, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-36, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-38, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-57, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-53, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-47, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-23, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-46, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-42, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-43, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-49, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-52, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-45, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-60, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-27, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-51, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-37, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-39, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-40, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-31, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.B-61, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.B-64, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.B-48, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-33, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.B-50, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-26, Supply of V belts for AHU motor blower set,Rubber, 8mm thickness, 13mm wide, heat and oil resistance.A-34, Aluminum ladder-Foldable, rust free, Heavy duty, durable, safe stepping,Size-8 ft, Aluminum ladder-Foldable, rust free, Heavy duty, durable, safe stepping,Size-10 ft, Synthetic gear oil for Cooling Tower, Lag coating for AC ducting insulation Temperature-80 Deg.C,30 Ltr Drum, Wheel bearing Grease, AHU TEFC drive motor (EF1 efficiency) ,1.1KW,1410 RPM, AHU TEFC drive motor (EF1 efficiency) ,2.2 KW 1450 RPM, AHU TEFC drive motor (EF1 efficiency) ,3.7 KW 1450 RPM, AHU TEFC drive motor (EF1 efficiency) ,5.5 KW 1450 RPM, PVC Service brush for copper pipe cleaning, Masonry Drill bit HSS, Size 1 to10mm 10 Pcs set, Polyurethane foam sheet density 36 to 40 kg per Cubic meter, Steel Screw Driver, CRC 2-26,500 ML can,metal application

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm2 16867 With Available Items [refer Enclosure For The Approximate Weight And Material Composition].location-available At Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc. Custodian-sse/diesel/goc.re-claimable Items [1] Wheel Set Complete [msu Tubes, Gear Wheel And Axle Boxes With Bearings]-6 Sets. [2] Lubricating Oil Cooler [ptloc] - 1no. S.1539 No.124441 Dt.01.10.2024. Note-[1] Delivery To Be Made On As Is Where Is And Lot Basis. [2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane,only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot.special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property. [8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery, Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean,free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12] The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdg3a 13286 With Available Items Without Traction Motors [06 Nos] [refer Enclosure For The Material Composition].location-diesel Loco Shed Goc. Custodian-sse/diesel Shed/goc. Re-claimable Items - [1] Wheel Set Complete [axle, Wheel Disc, Bull Gear, Msu Tube, Axle Boxes With Bearings]-6 Sets.[2]hood Lock Assembly - 25 Nos. S.1539 No.738155 Dt.29.11.2024. Note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane,only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot.special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property. [8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery, Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean,free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12] The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Diesel Loco Shed Goc)

Description: Condemned Civil Structure Consisting Of 1] Cond. Qtr No. 108, 8 Unit, 2] Cond. Qtr No. 114, 3 Unit, 3] Cond. Qtr No. 266, 4 Unit, 4] Cond. Qtr No. 268, 1 Unit, 5] Cond. Qtr No. 203, 8 Unit, 6] Cond. Qtr No. 283, 2 Unit, 7] Cond. Qtr No. 317, 4 Unit, 8] Cond. Qtr No. 318, 2 Unit, 9] Cond. Qtr No. 320, 2 Unit, 10] Cond. Qtr No. 321, 4 Unit, 11] Cond. Qtr No. 92, 3 Unit, 12] Cond. Qtr No. 284, 4 Unit, 13] Cond. Qtr No. 213, 2 Unit, 14] Cond. Qtr No. 170, 3 Unit, Total 50 Units, Total Qty- 01 By Lot. Free Delivery Period [fdp] For This Lot Has Been Fixed As 80 [eighty] Days. Above Mentioned Condemned Structure Are Offered Excluding Common Wall Of Adjacent Another Unit And Boundary Wall If Any Which Has Not Been Offered Or Sold . Therefore Such Type Of Cases Should Be Dealt With Proper Care During Dismantling So That Adjacent Unoffered And Unsold Unit Are Not Damage Or Broken In Any Way. Condition-1] Before Bidding Purchaser Are Invariably Advised To See The Lot And Also Check Whether Any Unit Of The Offered Lot Is Occupied In Any Way. If Found Occupied , In That Case It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office [ I.e. Sr.dmm/hwh ] In Writting At Least 24 Hours Prior To The Start Of Auction For Taking Further Necessary Action. 2] No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale Is Completed. 3] The Sold Lot Will Be Handed Over To The Purchaser In Presence Of Concerned Custodian , Isa-sv, Rpf, Cdms And Other Personnel As The Case May Be , 4] Dismantling Work Of Sold Structure Is To Be Done By The Purchaser On His Own Arrangement By Providing Tools, Safety Gears, Machinery And Labour Required For The Purpose. 5] Purchaser Should Ensure To Keep A Safety Banner Around The Work Spot. 6] Any Loss / Damage That May Arise During Dismantling Work Due To Accident Etc, Shall Be The Sole Responsibility Of The Purchaser And No Claim On This Account Will Be Entertained By The Railways Under Any Circumstances, 7] Dismantling Of The Sold Lot Is Allowed Only Up To The Ground Level Of The Condemned Structures. 8] Dismantling Of The Condemned Structures [sold Lot] Will Take Place In Presence Of Engg. Officials. 9] Purchaser Shall Ensure That Dismantling Work Does Not Affect Or Endanger Safety Of Life And Railway Property In Near Vicinity.10] No Explosives Can Be Used For Demolishing, 11] Custodian / Engg. Official Has To Ensure That Debris Arisen Out Of Dismantling To Be Cleared By Purchaser In Proportion Of Delivery Of Released Materials And He Will Invariably Certify In Sale Completion Report That All Debris/waste Etc. Generated Has Been Cleared By Purchaser And The Land Is Made Clean, Clear And Level For Further Use.

Description: CATEGORY: Glucoce Kit Erba 5x60 ml , BUN Erba 5x20 ml , Cholesterol kit Erba 5x20 ml , Protein Erba 5x50 ml , Albumin Erba 5x50 ml , Alk.phosphatage Erba 6x6 ml , S Calcium Erba 2x50 ml , Widal Kit test Tulip 2x2X5 ml , Cell pack 20 Lt Transasia , Stromatolyzer 500 ml Transasia , Thermal roll paper for Hematology Analys , Glucostrips SD BIOSENSOR or Abbott 100 str , Trop I Card Amickek 10 TEST , PLAIN TUBE NON VACCUM , EDTA TUBE NON VACCUM , micro Tips Box Small , Malaria Card J Mitra , Hbs Ag Card Tulip , Dengue Kit Card J Mitra , Urine contenair Urine contenair 30 ml , Disposible ESR Tube , Multixtix 10 sg 100 sprips Peerless , Pregnancy Test Card oscar 50 test , MIICRO PIPPETE 5 to 50 MU , MIICRO PIPPETE 10 to 100 MU , Creatinine Erba 4X60 ML , Triglycerides Erba 5x20 ml , S Bilirubin Erba 4x60 ml , SGPT Erba 5x20 ml , SGOT Erba 5x20 ml , Uric Acid kit Erba 5x20 ml , RA Factorc Test kit Tulip 35 test , CRP KIT TULIP 35 test , Blood Group Sera Anti ABD arkray 3x10 ml , Cell Clean 50 ml sysmex , PLAIN TUBE VACCUM , EDTA TUBE VACCUM , FLORIDE TUBE VACCUM , FLORIDE TUBE NON VACCUM , Vaccutainer needle , VDRL Card , MIICRO PIPPETE 100 to 1000 MU , TRIGLYCERIDES 6 x 50ML , SGOT 5 x 40 plus 1 x 50ML , SGPT 5x40 plus 1x50ML , CHOLESTEROL 6x50ML , CREATNINE 3x50 plus 3x50ML , URIC ACID 6x50ML , GLUCOSE 6x50ML , BLOOD UREA 6x40 plus 6x10 ML , ALBUMIN 6x50ML , PROTEIN 6x45ML , ALKLINE PHAPATASE 5x40 plus1x50ML , CALCIUM 6x50ML , EXTRA WASH 4x50ML , SYSTEMIC SOLUTION 4x50ML , MULTI CALIBRATOR 6x3ML , QUALITY CONTROL 4x50ML , TOTAL BILIRUBIN 5x40 plus 1x50ML , DIRECT BILIRUBIN 5x40 plus 1x50ML

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3a 16457 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/ernakulam, Custodian-sse/dsl/ers.re-claimable Items [1]wheel Set Complete [axle,wheel Disc,bull Gear,rsp Tubes, Axle Boxes With Bearings]- 6 Sets.[2]locomotive Batteries- 8 Nos. S.1539 No.534322 Dt.07.12.2024.note-[1]delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition- [1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12]further Stripping Of Sub Assemblies Such As Motors, Alternators, Turbo, Lube Oil Cooler, Compressor, Etc. Should Be Strictly Prohibited In Railway Premises To Prevent Unnecessary Delays And Pollution.[13]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [14] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [15] Part Delivery Is Not Permitted Against Part Payment. (location: Diesel Loco Shed Ernakulam)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3d 11149 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/erode, Custodian-sse/dsl/ed.re-claimable Items [1] Wheel Set Complete [axle, Wheel Disc, Bull Gear, Rsp Tube, Axle Boxes With Bearings]-6 Sets.[2]head Light -1 Nos S.1539 No.636452 Dt.28.12.2024.note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay.[12]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. [15]if Any Hsd Oil/lube Oil Available In Fuel Tank/oil Sump Of The Said Locos, The Same May Be Returned To The Custodian. (location: Diesel Loco Shed Erode)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3d 11121 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/erode, Custodian-sse/dsl/ed.re-claimable Items [1] Wheel Set Complete [axle, Wheel Disc, Bull Gear, Rsp Tube, Axle Boxes With Bearings]-6 Sets. S.1539 No.636451 Dt.28.12.2024.note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay.[12]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment.[15]if Any Hsd Oil/lube Oil Available In Fuel Tank/oil Sump Of The Said Locos, The Same May Be Returned To The Custodian. (location: Diesel Loco Shed Erode)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3a 16405 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/ernakulam, Custodian-sse/dsl/ers.re-claimable Items [1]wheel Set Complete [axle,wheel Disc,bull Gear,rsp Tubes, Axle Boxes With Bearings]- 6 Sets.[2]locomotive Batteries- 8 Nos. S.1539 No.534321 Dt.07.12.2024.note-[1]delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition- [1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12]further Stripping Of Sub Assemblies Such As Motors, Alternators, Turbo, Lube Oil Cooler, Compressor, Etc. Should Be Strictly Prohibited In Railway Premises To Prevent Unnecessary Delays And Pollution.[13]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [14] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [15] Part Delivery Is Not Permitted Against Part Payment. (location: Diesel Loco Shed Ernakulam)