Public Works Department Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Chhattisgarh government has posted on its website in a very hassle-free manner.
Public Works Department - PWD Tender
Opening Date
5 Mar 2019Closing Date
31 May 2019Tender Amount
₹ 5,31,34,49,000Costs
EMD
₹ 5,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
50270Bid Award Id
ViewTender No
50270Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwd.cg.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Extra rate for lead for every 50m lead or part there of and upto 150 m beyond 50 m free lead and 1.5 m free lift by manual means only. 1.9.1 ) For Soils
9091
-
-
Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers NOt exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M.
316519
-
-
Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers NOt exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete
106771
-
-
Providing filling and compacting local earth (from approved source pit) in layers NOt exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.
226552
-
-
Supplying chlorpyriphos/ Lindane emulsifiable concentrate of 20% in sealed containers including delivery as specified.
110517
-
-
Diluting chemical emulsion (chlorpyrifos/ lindane) in water as per manufacturers recommendation and injecting for pre-constructional curative cum preventive anti-teRmtite treatment:(Five year service guarantee bond to be signed by contractor) 1.25.1 ) Surface treatment by spreading emulsion under floor, over the plinth area before laying base concrete @ 5 litres / sqm
80465
-
-
Treatment of inside of plinth masonry wall on using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameterholes in plinth wall below plinth protection at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand).
18708
-
-
Treatment of outer side of plinth masonry wall using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameterholes in plinth wall at the junction of floor at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand).
18807
-
-
Carriage by mechanical transport for 5 km lead: 1.26.1) Earth
15204
-
-
Extra for mechanical transport for every one km or part thereof beyond first 5 km lead. 1.27.1) Earth
2120
-
-
Providing and fixing foRmtwork including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for : 2.1.1) Foundations, footings, base of columns and plinth beam in any shape and size.
145884
-
-
Wall of any thickness including attached pilasters, buttresses etc.
36422
-
-
Edge of slab, breaks in floor and walls upto 200mm.
23283
-
-
Columns, Pillars, Piers and likes- rectangular or square in shape
164308
-
-
Columns, beams & walls- circular or any other geometrical shape other than square and rectangular in all sizes
2388
-
-
Suspended floors, roofs, access platfoRmt, balconies (plain surfaces) and shelves (cast in situ)
129653
-
-
Beams, lintels, cantilevers & walls
158331
-
-
Vertical and horizontal fins individually or foRmting box, louvers bands, almirah shelves and likes
1283
-
-
Weather shade, chhajja, Cornices and mouldings
16640
-
-
Stair cases of all types excluding spiral and folded plate type, including risers and landing
7168
-
-
Extra for additional height every 1m or part thereof where height of staging for foRmt work exceeds 4.0 metre with adequate bracing, propping etc at all levels, for suspended floor, roof, landing, beam and balcony. (only plan area is to be measured):
21898
-
-
Extra for providing fixing and removing of propping from lower floor upwards for the concreting. Propping should be provided two floors below. The props of lower floor must be 50% of the props of the floor above including wedging etc. complete. In case propping is done in one floor below, only half the rate shall be paid
2220
-
-
Extra for unsupported individual columns with height more than 4.0 m from the immediate lower level in every floor.
(full area of column is to be paid)
8928
-
-
Providing and laying NOminal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of foRmt work. 3.1.2) 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm NOminal size).
6473
-
-
1:3:6 (1cement :3 coursed sand : 6 graded stone aggregate 20mm NOminal size )
12886
-
-
1:2:4 (1cement :2 coursed sand : 4 graded stone aggregate 40mm NOminal size )
12459
-
-
Providing and laying design mix reinforced cement concrete with crushed graded stone aggregate 20mm NOminal size using batching plant, transit mixer and concrete pump, in all works upto plinth level excluding cost of foRmt work.: 3.3.1) M-20 Grade
1645
-
-
M-25 Grade
99130
-
-
M-30 Grade
13667
-
-
Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
67058
-
-
Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire All complete: 3.12.2) TheRmto-Mechanically treated bars FE 500D
16222866
-
-
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm NOminal size) including foRmt work.
493
-
-
Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer
231484
-
-
Applying a coat of hot bitumen VG-10 using @ 1.7kg/ sqm on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
8710
-
-
Making 50mm thick plinth protection of plain cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm NOminal size) over 75mm bed of dry brick ballast 40mm NOminal size well rammed and consolidated and grouted with sand including finishing the top smooth.
19586
-
-
Providing and laying 25mm thick eves board/ facia made with cement mortar 1:3 (1 cement: 3 coarse sand) and chicken mesh including cost of foRmt work required but excluding steel reinforcement.
498
-
-
Extra for precast PCC/ RCC work of any mix including foRmt work, hoisting and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but excluding reinforcement
133
-
-
Providing and fixing in position impregnated fibre board confiRmting to IS: 1838 in expansion joints, including cost of primer, sealing compound all complete. 3.21.2) 25mm thick
2107
-
-
Providing and applying for heRmtetically water proof sealing of vertical / horizontal expansion joint with approved make Poly Sulphide Sealant compound (two component elastomeric sealant) having 80% tensile modulus elongation, proper bonding with building surface complete with cleaning and preparing of building surface, applying polymer solvent primer, providing and fixing PU back up rod of suitable dia in expansion joint for core making, filling with Poly Sulphide Sealant (Sealant filling depth should be minimum half of the joint gap), finishing and smoothing the surface etc complete. The application shall be got done through the authorised applicator of the manufacture of compound: 3.24.3 ) For gap 50 mm wide
6237
-
-
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar confoRmting to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's peRmtanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm NOminal size) complete as per design.
736
-
-
Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for underground structures using rough Kota stone and consisting of:
i) 1st layer of 22mm to 25mm thick approved rough Kota stone slab over a 25mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound confoRmting to IS:2645 over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound.
ii) 2nd layer of 25mm thick cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound.
iii) Finishing top with stone aggregate of 10mm to 12mm NOminal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.
3295.52
-
-
Providing and laying integral cement based treatment for water proofing on the vertical surface at all levels by fixing 22 mm to 25mm thick rough Kota stone slab with cement slurry mixed with water proofing compound confoRmting to IS:2645 with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand) with neat cement punning mixed with water proofing compound complete.
927
-
-
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of WC, kitchen and the like consisting of : i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound confoRmting to IS 2645 including rounding off junction of vertical and horizontal surface.
ii) 2nd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound including rounding off junction of vertical and horizontal surface.
iii) 3rd course of applying blown or residual bitumen applied hot @ 1.7 kgper sqm of area.
iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kgper sqm of area.
5811
-
-
Providing and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with NOn-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ltr and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under :Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane NOt less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147.
54883
-
-
Extra for covering top of membrane with Geotextile, 120gsm NOn woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrane with inteRmtittent touch by heating the membrane by Butane Torch as per manufactures recommendation
69498
-
-
Providing and placing in position suitable PVC water stops confoRmting to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete : 4.4.1 ) Serrated with central bulb (225mm wide, 8 11mm thick).
1343
-
-
Providing and fixing broken glazed tiles on top of hot bitumen @ 1.00 kg/ sqm (0.80 kg-85/25 grade and 0.20 kg-80/100 grade) and joint filled with cement mortar 1:2 (1 cement :2 marble dust) mixed with water proofing compound complete.
61918
-
-
Providing and mixing in cement concrete, triangular polyester fiber Recron 3s (Anti-shrinkage Admixture) of 12 mm length of approved make like Reliance industries Ltd etc. in proportion as recommended by manufacturer.
12395
-
-
Random rubble masonry with hard stone in foundation and plinth in Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand: 12 stone aggregate 20mm NOminal size) upto plinth level.
1954
-
-
Brick work with modular fly-ash lime bricks (FALG Bricks) confiRmting to IS:12894-2002 of class designation 4.0 in foundation and plinth & super structure in; 7.5.4 ) Cement Mortar 1:6(1 cement : 6 coarse sand) (Upto Plinth & foundation)
65179
-
-
Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
65581
-
-
Extra for brick work in square and rectangular pillars. (size NOt more than 600mm in any direction)
260
-
-
Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confiRmting to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level: 7.11.2) Cement Mortar 1:4 (1 cement : 4 coarse sand)
11863
-
-
Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level:
16151
-
-
Extra for providing and placing in position hopping 25x1.60 mm or 2 NOs 6mm dia MS bars reinforcement at every third course of half brick masonry.
11863
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. 8.1.1) Teak wood
49
-
-
Sal, bijasal, benteak, khair, haldu
539.9
-
-
Providing 40x5mm iron hold fast 40cm long including fixing to frame with 10mm bolts nuts and wooden plug and embedding in Cement Concrete 1:2:4 in blocks of size 30x10x15cm
42826
-
-
Providing and fixing Dash fastener (for fixing door/ window frames) on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete .8.4.2 ) Dash fastener 10x75mm
69453
-
-
Providing and fixing 40mm thick paneled or glazed or paneled and glazed shutter frames for doors excluding hinges and paneling. (Area of shutter to be measured without deducting paneling area) 8.6.1 ) Teak wood
686
-
-
Bijasal, benteak, khair, haldu
1569
-
-
Providing and fixing 35mm thick glazed shutter frames for windows, clerestory windows, ventilators etc. using glass panes including M.S. butt hinges with necessary screws but excluding glass panes. (Area of shutter to be measured without deducting paneling area). 8.9.1 ) Teak wood
150
-
-
Bijasal, benteak, khair, haldu wood.
108
-
-
Providing and fixing glass panes in glazed or paneled and glazed shutters of doors and window, clearstory windows etc (Only area of glass panes to be measured). 8.11.2 ) 5 mm thick
108
-
-
6mm thick
8703
-
-
8mm thick
266
-
-
Providing and fixing flush door shutters, confoRmting to IS 2202 (Part 1), interior grade, commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges. 8.13.1 ) 40 mm. thick (single leaf)
6635
-
-
35 mm. thick (single leaf)
2210
-
-
Extra for double leaf shutter instead of single leaf.
740
-
-
Providing and fixing flush door shutters, confoRmting to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges: 8.12.1 ) 40 mm. thick (single leaf)
1589
-
-
Providing and fixing lipping with second class teak wood lipping on all edges of shutters. 8.18.4 ) 40 x 6 mm size
36158
-
-
35 x 6 mm size
4489
-
-
Extra for cutting rebate in flush door shutter (total area of door shutter to be measured).
2152
-
-
Providing and fixing paneling in paneled or paneled and glazed shutters for doors etc. (only area of paneling to be measured). Paneling for or paneled and glazed shutters 25 mm to 40 mm thick: 8.22.1 ) Teak wood (16mm thick panel)
582
-
-
Bijsal, Haldu, Benteak, Khair (16mm thick panel)
140
-
-
Providing and fixing 35mm thick wire gauge shutter having top and style rail 95mm width, bottom and lock rail 197mm width, using galvanized M.S. wire dia of 0.45 mm for doors, windows, clerestory windows excluding hinges. 8.23.1 ) Teak Wood
429
-
-
Bijasal, Haldu, Benteak, Khair
3288
-
-
Providing and fixing teak wood jamb lining with necessary screws, priming coat on exposed surfaces etc complete. (only jamb lining area is to be measured) 8.33.2 ) 25 mm thick
1372
-
-
Providing and fixing in wall lining 12mm thick flat pressed three layer (medium density) particle board pre-laminated one side decorative lamination on other side balancing lamination exterior Grade - I MDF Board 12 mm thick confiRmting to IS:14587 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete
394
-
-
Providing and fixing wall paneling frame made of commercial grade 12mm thick water proof ply strips 100mm wide at 600mm apart center to center vertically and horizontally with necessary screws, wooden plugs etc complete as required.
1300
-
-
Providing and fixing commercial grade water proof ply for wall paneling on wooden frame with necessary nails complete as required. 8.36.1) 19 MM
433.33
-
-
12 MM
650
-
-
6 MM
216.67
-
-
Providing and fixing approved shade veneering on wood wall paneling complete as required.
1300
-
-
Providing and fixing 25mm thick teak wood plain skirting with necessary screws and a priming coat with wood primer on unexposed surfaces.
108.33
-
-
Providing and fixing teak wood moulded beading to doors windows frames including necessary screws and primary coat on exposed surface. 8.39.5 ) 50x19mm
37900
-
-
25 x 12mm
990
-
-
Providing and fixing decorative curtain rod assembly made of 32mm dia aluminium pipe covered with decorative finish plastic sleeve, 2 NOs or more 100x50x20mm size decorative wooden bracket, 2 NOs 100x50mm dia decorative wooden rod holding end plugs and 50mm dia wooden curtain rings 1 NOs for every 100mm of length of curtain rod including PVC
rawl plugs etc complete
13582
-
-
Providing, and fixing M.S. round and square bars with MS flat of required pattern in wooden frames for windows & clerestory windows including applying a priming coat of red oxide zinc chromate primer, welding etccomplete 8.52.2 ) Ornamental grill
2160
-
-
Providing and fixing stainless steel wire mesh of average width of aperture 1.56mm with wire of dia 0.45mm to doors, windows and clerestory windows including 19x12mm teak wood beading etc. complete.
3960
-
-
Providing and fixing antique/ SS finished brass butt hinges with antique/ SS polished MS screw complete: 8.77.1 ) 125x85x5.50mm (Heavy Type)
60
-
-
75x65x4.00 mm (Heavy Type)
72
-
-
100x70x4.00 mm (Ordinary Type)
72
-
-
75x40x2.50 mm (Ordinary Type)
90
-
-
Providing and fixing M.S. bright finished or black enameled Butt hinges IS : 1341 marked with necessary iron screws: 8.94.1 ) 125 x 65 x 2.12 mm
150
-
-
Providing and fixing aluminium sliding door bolts with 16mm rod, necessary nickel plated iron nuts bolts and screws etc complete. 8.120.2 ) 250 x 16mm
198
-
-
Providing and fixing aluminium tower bolts (Barrel type) with necessary nickel plated iron screws etc complete 8.122.1 ) 250 x 10 mm
198
-
-
150 x 10 mm
198
-
-
Providing and fixing aluminium door handles 2.5mm thick with necessary nickel plated iron screws etc complete 8.123.1 ) 150 mm
396
-
-
Providing and fixing hanging aluminium door stopper with necessary nickel plated iron screws etc complete
. 8.124.2 ) Double
198
-
-
Providing and fixing antique/ SS finished brass parliamentary hinges with antique/ SS polished MS screw complete: 8.78.1 ) 150x125x27x5 mm
7173
-
-
125x125x27x5 mm
2391
-
-
Providing and fixing antique/ SS finished brass sliding door bolt with necessary bolts, nuts and antique/ SS polished MS screw complete: 8.79.1 ) 300x16mm
456
-
-
250 x 16mm
456
-
-
Providing and fixing antique/ SS finished brass door latch with antique/ SS polished MS screw complete: 8.80.1 ) 300 x16x5 mm
456
-
-
250x16x5 mm
456
-
-
Providing and fixing antique/ SS finished brass tower bolts (Barrel type) with antique/ SS polished MS screw complete: 8.81.1 ) 250 x10 mm
912
-
-
150 x 10 mm
912
-
-
Providing and fixing antique/ SS finished brass indicating bolt (Vacant/ engaged) with antique/ SS polished MS screw complete:
363
-
-
Providing and fixing antique/ SS finished brass handles with antique/ SS polished MS screw complete: 8.84.1 ) 125 mm
912
-
-
75 mm
912
-
-
Providing and fixing 100mm antique/ SS finished brass mortise latch and lock with six levers and a pair of lever handles with antique/ SS polished MS screw complete.
1424
-
-
Providing and fixing antique/ SS finished brass 100mm mortise latch with one dead bolt and pair of lever handles with antique/ SS polished MS screw complete.
259
-
-
Providing & fixing 150mm antique/ SS finished brass floor door stopper with rubber cushion and antique/ SS polished MS screw complete to suit the shutter thickness
1174
-
-
Providing and fixing antique/ SS finished brass hard drawn hooks and eyes with antique/ SS polished MS screw complete: 8.91.1 ) 300 mm
208
-
-
200 mm
164
-
-
Providing and fixing antique/ SS finished brass hasp and staple (safety type) with antique/ SS polished MS screw complete: 8.92.1 ) 150 mm
64
-
-
Providing and fixing antique/ SS finished brass hanging door stopper with necessary antique/ SS finished MS steel screws complete
30
-
-
Providing and fixing M.S. bright finished or black enameled Butt hinges IS : 1341 marked with necessary iron screws: 8.94.1 ) 125 x 65 x 2.12 mm
942
-
-
100 x 58 x 1.90 mm
150
-
-
Providing and fixing M.S. bright finished or black enameled sliding door bolts with bolts, nuts and necessary iron screws: 8.99.1 ) 300 x 16 mm
132
-
-
Providing and fixing M.S. bright finished or black enameled door latch with necessary iron screws: 8.100.1 ) 300 x 20 x 6 mm
100
-
-
Providing and fixing stainless steel butt hinges IS : 12817 marked with necessary stainless steel screws etc complete
.8.132.2 ) 125 x 2.5 mm (heavy)
5189
-
-
100 x 2.5 mm (heavy)
198
-
-
75 x 2.5 mm (heavy)
72
-
-
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 8.137.1 ) 300 mm
6384
-
-
Providing and fixing stainless steel door latch with 12mm rod, 2.5mm thick flap, necessary stainless steel screws etc complete. 8.138.1 ) 300 mm
6118
-
-
Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 8.139.1 ) 250 x10 mm
6681
-
-
150 x10 mm
6214
-
-
Providing and fixing stainless steel door handles having flap thickness2.5mm, necessary stainless steel screws etc complete. 8.140.1 ) 150 mm
13139
-
-
100 mm
99
-
-
Providing and fixing Stainless steel "D" shape door handles made of 10mm dia rod with necessary stainless steel screws etc complete. 8.141.1) 200 mm
112
-
-
Providing and fixing stainless steel hooks and eyes with 5.6mm dia rod with necessary stainless steel screws etc complete 8.142.1 ) 200 mm
88
-
-
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. 8.143.1) Single
1468
-
-
Double
5128
-
-
Providing and fixing factory made 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mm X 25mm or less as per requirement with an average wall thickness of 1mm ± 0.3mm. PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. An M.S. tube having dimensions 19mm x 19mm is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25mm X 11mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures' specification
680
-
-
Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 NOs of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge.
2346
-
-
Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc complete
1832
-
-
Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanized M.S screws including drilling holes in masonry work /CC/ R.C.C by drilling machine and making good etc complete. 8.160.4 ) 50 mm long
400
-
-
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll foRmting process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) NOte: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be acceptable. 8.163A.1 ) Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of
appropriate dimension. (Area of window above 0.75 sqm)
127
-
-
Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of
appropriate dimension. (Area of window above 0.75 sqm)
52
-
-
Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm).
52
-
-
Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll foRmting process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately).
NOte: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be acceptable. 8.164B.1 ) Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm)
2067
-
-
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension Comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ±0.2 mm thick galvanized mild steel section made from roll foRmting process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and
of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) NOte: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 8.165D.2 ) Three track three panels sliding window with fly proof SS wire mesh (Two NO glazed & one NO wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).
728
-
-
Three track three panels sliding window with fly proof S.S wire mesh (Two NO glazed & one NO wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).
4601
-
-
Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll foRmting process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved
quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). NOte: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 8.167F.1 ) Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm)
72
-
-
Three track three panels sliding door with fly proof S.S wire mesh (Two NO glazed & one NO wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm)
266
-
-
Providing and fixing clear float toughened glass door or partition to required thickness frameless in appropriated sizes includive of edge molding polish and making required size slot or hole for patch fitting / hardware etc. The glass to be assembled together with patch fitting and hardware in proper alignment with all lobour tools and tackles etc complete.( Patch fitting and hardware to be paid seperately). 9.63.3 ) 6 mm thick for glazing etc
7579
-
-
10 mm thick for door / partition
338
-
-
12 mm thick for door / partition
8
-
-
Structural steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer
8500
-
-
Structural steel work riveted or bolted or welded in built-up sections, trusses and frames work upto a height of 5m above plinth level, including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer.
37415
-
-
Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holdingdown bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. 9.3.2 ) Electric resistance or induction butt welded tubes Grade-300
470956
-
-
Extra for hoisting trusses and placing in position over height above 5m for every 2.5 m height or part thereof
1978424
-
-
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. 9.6.1 ) In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete
44681
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
973246
-
-
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer.
6096
-
-
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat of red oxide zinc chromate primer
196717
-
-
Providing and fixing factory made ISI marks steel doors, windows and ventilators side/ top/ centre hung made up of standard rolled steel section confoRmting to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints mitred and flash butt and sash bars teNOned and riveted/ welded with 10 Cm long lugs of size 15x3mm embedded in cement concrete block 15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone aggregate 20 mm NOminal size) or rawl plugs and screws or with bolts and nuts as required including providing and fixing of hinges, pivots, handles, pegs, stays, rolling devices, locking arrangements, spring catch etc., as required complete including applying a priming coat of red oxide zinc chromate primer.
966
-
-
Providing and Fixing Plain frosted glass film over glazed door, window and partitions etc. complete
6459
-
-
Providing and Fixing special designer glass film over glazed door, window and partitions etc. complete
1428
-
-
Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring. 9.27.1 ) 80x1.25mm M.S. Laths
1035
-
-
Providing and fixing 27.5cm long wire spring for rolling shutters
460
-
-
Providing and fixing M.S. sheet top cover for rolling shutter 9.29.1 ) 1.25mm thick
786
-
-
Providing and fixing ball bearing for rolling shutters
234
-
-
Providing and fixing mechanical device chain and crank operation for operating rolling shutters
113
-
-
Providing and fixing M.S. fan clamp/ hook for ceiling fan made out of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop.
5314
-
-
Providing and fixing concertina coil fencing with required dia 610 mm (having 50 NO round per 6 metre length) up to 3m height of wall with existing angle iron Y shaped placed 2.4 m or 3.00 m apart tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-incharge with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
2310
-
-
Providing and fixing NETLON insect screens with 25mm wide Hook and loop tape all around to wooden/ aluminium/ steel windows, ventilators and the like complete.
405
-
-
Providing and placing in position angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for required length and drilling holes upto 10 mm dia as per requirement including priming coat with red oxide zinc chromate primer and placing the post/ strut in cement concrete block.
2500
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) confoRmting to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be aNOdized transparent or dyed to approved shade according to IS: 1868, minimum aNOdic coating shall be of grade AC-15. (Glazing and panelling to be paid for separately 9.47.1 ) For fixed portion
7610
-
-
For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately).
2368
-
-
Extra for polyester powder coated (minimum 50 micron) aluminium sections instead of aNOdized
9978
-
-
Providing and fixing 12mm thick pre-laminated particle board flat pressed with decorative lamination and balancing lamination on specified sides exterior Grade – I MDF Board 12 mm thick confiRmting to IS:14587, including fixed in aluminium doors, windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete. 9.50.1) With decorative lamination on one side and balancing lamination on other side.
120
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): 9.51.1 ) With float glass panes of 4 mm thickness
106
-
-
With float glass panes of 6 mm thickness
270
-
-
With float Toughened glass panes of 5mm thickness
7969
-
-
Providing and fixing aNOdized aluminium framed grill (minimum aNOdic coating of grade AC 15)of approved shape, pattern and design including cutting, bending, hoisting and erecting/ fixing to door, window frame or to wall with fixing clips or hold fasteners or bolts and nuts as required etc. complete.
839
-
-
Providing and fixing of six/seven levers branded and approved mortise lock.
40
-
-
Providing and fixing of floor spring IS: marked (Everite, Door link or any equivalent make) with stainless steel cover plate including cutting and making good the floor etc. complete.
60
-
-
Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete. 9.57.2 ) SS Grade 304
177600
-
-
Extra for providing and fixing tinted glass panes in aluminium door, window, ventilator shutters and partitions instead of float glass. 9.58.3 ) 6 mm thickness
216
-
-
Extra for providing and fixing reflective glass panes in aluminium door, window, ventilator shutters and partitions instead of float glass 9.59.3) With float glass panes of 6 mm thickness
100
-
-
Designing, providing and fixing aluminium frame work made of special aluminium section on building face with M.S. angle iron brackets fixed on RCC structure with S.S. hold fasteners, including providing and fixing two sided structural adhesive tape of appropriate grade (NORTON or equilent), on aluminium sections for fixing aluminium/ glass panel, sealing on periphery of frame work, by providing EPDM gasket, silicon weather sealant between aluminium frame and building structure including hire charges of double scaffolding complete.
1096
-
-
Supply and fixing of polymer precoated galvalume profile sheets (PPGL) of approved size, shape and pitch of corrugation, total coated thickness (TCT) 0.60 mm +/- 5%, epoxy primer on both side of the sheet and colour polyester top coat 18-20 microns and 6-7 microns on bottom. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameterwith bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
730
-
-
Providing and fixing semi transparent polycarbonate compact sheet roofing of approved colour to make any NORmtal shape of roofing / covering of any pitch and fixing with specially designed powder coated aluminium section with 60mm wide flange of standard design weighing NOt less than 1.1 kg/ m at spacing NOt more than 1.2 m centre to centre with EPDM gasket and silicon sealant on all four edges of aluminium section fixed with self drilling stainless steel screws all complete including aluminium edge angle 40 mm x 40 mm x3mm as per manufacture specification and as per direction of Engineer-in-Charge. 10.28.2 ) 10 mm thick twin wall
205
-
-
Providing and fixing 18mm thick insulating board ceiling of approved quality with necessary nails etc., complete (Frame work to be paid separately). 10.31.3 ) Flame retardant face insulating board
730
-
-
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design
33821
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm NOminal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete.
1644
-
-
Providing and laying Manglore pattern tiles 20 mm thick (without hip or ridge tiles) on steel/ wooden frame (frame work to be paid separately)
8411
-
-
Providing and laying Manglore pattern hips and ridge tiles fixed in cement mortar 1:6 etc. complete
774
-
-
Providing and fixing Terracota tiles of approved design and size over and including 20mm thick cement plaster 1:3 including floating coat of cement slurry on bed and filling joints with neat cement slurry mixed with pigment to match the shade of tiles complete.
5510
-
-
Providing and fixing ISI Marked designer tiles of approved design and size confiRmting to IS: 13801 over and including 20mm thick cement plaster 1:3 including floating coat of cement slurry on bed and filling joints with neat cement slurry mixed with pigment to match the shade of tiles complete
255
-
-
Providing and fixing steel grid for false ceiling made from M.S. rectangular hollow tubes of 50x25x1.25mm (wall thickness) as main runners to be jointed to cross runners of same size by electric arc welding with spacing NOt exceeding 610x610mm in any direction. The frame to be screwed to the wall using wooden plugs and wood screws of size 50x8mm at an interval of NOt more than 300mm centre to centre. The grid to be supported using 6mm M.S. hanger bars at 1200mm centre to centre both ways bent, hooked, fixed to existing R.C.C. roof with fastner or to the truss as the case may be and bolted to the grid with the help of suitable M.S. holding cleats, complete.
3317
-
-
Providing and fixing at all height false ceiling consisting of frame work W / U/ L sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeterchannels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeterof ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeterchannels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board confoRmting to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting.
25656.5
-
-
Providing and fixing of aluminium panel false ceiling of approved colour consisting of panels 300mm wide x 30 mm deep x 0.7mm thick with bevel edge and length up to 6.0 metre. The panels are made from corrosion resistance aluminium alloy AA 3005 (Al. Mg) (for higher strength and good roll foRmting characteristics) sheet chromatised for maximum bond between metal and paint, enamel painted twice under high temperature, one side with a full primer and finish coat and the other side (inner side) with a primer coating and Skin Coat on a Continuous Paint Line. Panel shall be fixed by clipping to panel carrier of size 41.5mm wide x 62mm deep x 0.95mm thick in standard length of upto 5 metre made of doubled baked black enamelled aluminium alloy AA 5050 (Al. Mg) with cut outs to hold the 300mm wide panels fixed at a distance of 0.3 m from wall and 2.4 m from centre to center. Panel carrier shall be suspended by means of G.I. suspension rod 4mm dia and a Galvanised suspension spring clip at a distance of 1.7 m centre to center. Wall trim box of size 15x30x15mm made from 0.4mm thick aluminium alloy sheet to be provided all along the wall to hold panels (only surface area of false ceiling is to be measured and NO deductions for lights, diffusers, columns etc shall be made) 10.64.2 ) With long perforated panels having perforation with 2.0mm dia and 5mm center to center and pasted with NOn woven tissue on the back side
3318
-
-
Providing and fixing of aluminium tile false ceiling comprising of Tile of size 600 x 600mm x 0.7mm. The Tile ends will be raised with pips and stops to ensure positive engagement into the spring to enable for demounting of individual panels. The Tile sides will be sufficiently high to ensure a minimum deflection across the length of Tile. All Tiles will be bevel edged. The Tile shall be powder coated. The Tile shall be clipped into clip-in profile made of 0.5mm thick G.I sheet. The clip-in profile shall be supported from slab by means hold on clamp with clip and 4mm dia G.I. rod fixed to ceiling rigidly. Wall trim box of size 15x30x15mm made from 0.4mm thick aluminium alloy sheet to be provided all along the wall to hold panels
(only surface area of false ceiling is to be measured and NO deductions for lights, diffusers, columns etc shall be made) 10.65.2 ) With perforated tiles having perforation with 2.5mm dia and 5mm center to center and pasted with NOn woven tissue on the back side
1406
-
-
Providing and making 6 mm thick cement plaster of mix: 11.1.1 ) In Cement mortar 1:3 (1 cement : 3 fine sand)
121186
-
-
Providing and making 12 mm thick cement plaster of mix: 11.2.4 ) In Cement Mortar 1:6 (1 cement : 6 fine sand)
171942
-
-
Providing and making 15 mm thick cement plaster on the rough side of single or half brick wall of mix: 11.3.2 ) In Cement Mortar 1:4 (1 cement : 4 fine sand)
9430
-
-
In Cement Mortar 1:6 (1 cement : 6 fine sand)
171942
-
-
18 mm thick cement plaster with under layer of 12mm thick cement plaster 1:5 (1 cement : 5 fine sand) finished with a top layer of 6mm thick cement plaster 1:3 (1 cement : 3 fine sand).
303935
-
-
Extra for providing and mixing water proofing materials in cement plaster work in proportion as recommended by manufacturer.
31709
-
-
Providing and mixing in cement mortar, triangular polyester fiber Recron 3s (Anti-shrinkage Admixture) of 6 mm length of approved make like Reliance industries Ltd etc. in proportion as recommended by manufacturer.
4188
-
-
Extra for plastering of exterior walls when height exceeds 10m above ground level for every additional height of 3.0m or part thereof
13334
-
-
Extra for plastering on circular work NOt exceeding 6.0metres in radius
2093
-
-
Extra for plastering done on mouldings, cornices or architraves including neat finish to line and level
165
-
-
Providing and making 12mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand) per cm width: 11.31.2 ) Sunk Bands
20307
-
-
Raised Band
20406
-
-
Providing and making 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand) per cm width: 11.32.2 ) Sunk Bands
12153
-
-
Raised Band
12157
-
-
Drip course
12350
-
-
Providing and making moulded mortar band in cement mortar 1:4 (1 cement : 4 fine sand) per cm width: 11.33.1 ) 12 mm thick
43866
-
-
18 mm thick
43444
-
-
Extra for lining over plaster to imitate stone or concrete block walling
91129
-
-
Making grove in cement plaster while plastering upto10 mm deep and 10 mm wide
14596
-
-
Providing and fixing chicken mesh weighting NOt less than 250 gms/ sqm as per IS : specification in the required width with 10mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. complete before plastering upto 10mts in height.
39293
-
-
Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 kg/ sqm for receiving cement concrete floor including roughening cleaning etc complete.
83348
-
-
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement.. 12.3.1 ) 40 mm thick
2373
-
-
50 mm thick
6534
-
-
52 mm thick cement concrete flooring with under layer of 40mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm NOminal size) and top layer of 12 mm thick cement metallic hardener concrete mix 1:2 (1 cement hardener mix : 2 stone aggregate of 6 mm size by volume) with metallic hardening compound of approved quality mixed with cement in ratio of 4:1 (4 cement : 1 metallic floor hardening compound by weight) including finishing etc. complete.
1130
-
-
Extra for making chequers of approved pattern on cement concrete flooring, landing, pavement etc.
6701
-
-
Cement plaster skirting upto 30 cm. height with cement mortar 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement including rounding of junction with floor. 12.6.1 ) 18 mm thick in two layers of 12mm and 6mm
955
-
-
Providing and fixing ceramic glazed wall tiles confoRmting to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing in white cement mixed with matching pigment complete. 12.7.2 ) Size above 200x300mm
24808
-
-
Providing and fixing rectified glazed ceramic floor tiles of 1st quality confoRmting to IS : 15622 of approved make in all colours, shade laid on 20 mm thick Cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3 kgper sqm including pointing in white cement mixed with matching pigment etc., complete. 12.74.3 ) Size 600x600mm thickness 8 to 9mm
3560
-
-
Providing and laying double charge/ multi charge ( minimum 2.0mm thick layer ) vitrified floor tiles with water absorption less than 0.05% and confoRmting to IS : 15622 of 1st quality of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 12.79.1 ) Size 600x600mm thickness 9 to 10mm
57153
-
-
Size 1000x1000mm thickness 10 to 12mm
7002
-
-
Extra for providing and laying vitrified floor tiles with 2-5mm grove in between the tiles including grouting the grove with water resistant epoxy compound or with white cement and approved pigments etc. complete. 12.14.1 ) Size 600x600mm
57153
-
-
Size 1000x1000mm
7002
-
-
15mm thick Marble stone slab flooring over 18mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including grinding rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) 12.38.3 ) Agaria White
106
-
-
Wonder marble.
255
-
-
15mm thick Marble stone slab in, tread & risers of steps, skirting, dado, walls and pillars on 12mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry including matching pigment, rubbing and polishing etc. complete. (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 M). 12.39.3 ) Agaria White
17
-
-
Wonder marble.
19
-
-
Extra for NOsing in marble stone for treads
15
-
-
Extra for NOsing in Granite stone for treads
14288
-
-
15 mm thick Table rubbed polished Granite stone slab flooring laid over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) 12.45.2 ) Granite stone black
4589
-
-
Granite stone lakha red/ shahi red
8609
-
-
15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (Average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m). 12.46.2 ) Granite stone black
4058
-
-
Granite stone lakha red/ shahi red
5204
-
-
25 mm thick KOTA stone slab flooring over 20mm (average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing etc. complete (Area of slab to be over 0.20 sq.m and upto 0.50 sq.m)
11027
-
-
KOTA stone slab 25mm thick in risers and treads of steps, skirting dado and pillar laid in 12mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. (single stone is to be used for riser and treads of steps and the width of stone for skirting and dado shall be equal to the height of skirting/ dado with a minimum length of 1.0 M.)
5192
-
-
Extra for NOsing in steps and treads of Kota stone slab.
3183
-
-
Extra for necessary grinding and polishing to get mirror finish on KOTA/ Marble Stone flooring/ steps/ treads instead of NORmtal grinding and polishing.
12097
-
-
Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250
kg/sq.cm 12.65.1 ) Plain/ NORmtal coloured precast interlock concrete block
70307
-
-
25mm wooden planking tongued and grooved in flooring including fixing with iron screws complete with: 12.68.1 ) Teak wood
310
-
-
38 mm thick parquet (wood blocks) flooring of teak wood laid over 25mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm NOminal size) to be paid separately coated with thin layer of hot bitumen (blown type) @ 2.45 kg/ sqm including fixing blocks after dipping in hot bitumen (blown type) upto half depth planned, leveled, smooth and finished complete.
133
-
-
Extra for plaining the lower surface of wooden planking
265
-
-
Providing and fixing 2mm thick homogeneous polyvinyl chloride sheet in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesive @ 0.25 kgper sqm of approved quality and manufacturer like Dunlop S-758, Fevicol SR 998 or equivalent including rolling with light wooden roller weighting about 5 kgall complete in approved colour and shade.
1109
-
-
Providing and fixing in position homogeneous P.V.C. quartz reinforced floor covering tiles confoRmting to I.S. 3462/1986 of size 300x300 mm over existing smooth and finished surface including removal of dust etc. from existing floor and laying approved adhesive (Dunlop S- 758, Fevicol SR 998 or equivalent) at the rate of 0.25 kg/ sqm including rolling with light wooden roller weighing about 5 kgetc. complete 12.72.2 ) 2.0 mm thick tiles (Weight 3.80 kgper sqm)
316
-
-
15 mm thick Marble work (machine cut, table rubbed & polished) for kitchen platfoRmt, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with
matching pigment including rubbing and polishing to edge moulding to give high gloss finish. 13.3.5) Udaipur green marble
283
-
-
15mm thick Granite work (machine cut, table rubbed & mirror polished) for wall lining (veneer work) in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with cement mortar 1:2 (1 white cement: 2 marble dust) mixed with matching pigment. (Area of slab should be over 0.5 sqm). 13.4.2 ) Granite stone black
142
-
-
Granite stone lakha red/ shahi red
322
-
-
15mm thick Granite work (machine cut, table rubbed & mirror polished) for kitchen platfoRmt, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish. 13.6.2 ) Granite stone black
1998
-
-
Granite stone lakha red/ shahi red
406
-
-
Extra for providing edge moulding to 15mm thick stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 13.19.1 ) Marble work
696
-
-
Granite work
4779
-
-
Extra for fixing marble /granite stone in facia and drops of width upto 150 mm with epoxy resin based adhesive instead of cement mortar including cleaning etc. complete.
5079
-
-
Extra for making opening of required size & shape for wash basins/ kitchen sink in kitchen platfoRmt, vanity counters and similar location in marble/Granite/stone work including making necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.
1375
-
-
Mirror polishing on marble work/ Kota stone/ Granite work where ever required to give high gloss finish complete. 13.22.2 ) On kitchen platfoRmt, sills and similar
9017
-
-
Providing and fixing (Table Rubbed & polished) 30mm thick jali throughout (without sunk or moulded in jali slab) in white cement mortar 1:2 (1 white cement : 2 marble dust) with and admixture of pigment to match the marble shade, jali pattern to be cut square to jali slab without any chamfers as per drawings & designs and patterns approved by the Engineer-in-charge. 13.23.6 ) Pink plain marble
200
-
-
Providing and fixing one side polished 25 mm thick RAJIM SAND STONE shelves fixed in walls in cement mortar 1:3 (1 cement : 3 coarse sand) including finishing complete. 13.25 ) One side polished
80
-
-
Providing and applying plaster of paris putty over plastered wall surface including scaffolding complete 14.1.1 ) Upto 2 mm thickness to make surface even and smooth in line and level.
311566
-
-
More than 2 mm thickness to make surface even and smooth in true plumb and line and level.
14325
-
-
Providing and applying plaster of paris putty over plastered ceiling surface including scaffolding complete. 14.2.1 ) Upto 2 mm thickness to make surface even and smooth in line and level
95795
-
-
More than 2 mm thickness to make surface even and smooth in true plumb and line and level.
2733
-
-
Providing and making plaster of paris moulding bend in approved pattern in ceiling / wall in line and level including scaffolding complete. 14.3.1 ) Upto 50 mm width and 10mm thick
30935
-
-
Above 50 mm and upto 100 mm width and 10mm thick
15465
-
-
White washing with lime to give an even shade. 14.5.1 ) On new work (Three or more coats)
2936
-
-
Distempering with acrylic washable distemper to give an even shade 14.9.1 ) On new work (Two or more coats)
93300
-
-
Wall painting with acrylic luxury emulsion (plastic) paint of required shade to give an even shade 14.11.1 ) On new work (two or more coats)
350431
-
-
Applying one coat of cement primer on wall surface.
291974
-
-
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even
184928
-
-
Finishing walls with water proofing cement paint to give an even shade 14.14.1 ) On new work (Two or more coats )
13242
-
-
Painting exterior surface with PREMIUM ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with: 14.16.1 ) On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
167757
-
-
Painting exterior surface with TEXTURED exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with 14.17.1) On new work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm
115324
-
-
Providing and applying synthetic/ acrylic plaster giving protective layer and decorative finish on any surface in approved design and shade as per manufacturer's specifications: 14.18.1 ) 2.0mm thickness (average) having design scratched with special roller
38573
-
-
Finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including priming coat with epoxy primer, preparation of surface, etc. complete.
9334
-
-
Applying priming coat on wood work with ready mixed primer.
8273
-
-
Applying priming coat on steel work with red oxide zinc chromate primer
647
-
-
Painting on new work (two or more coats) to give an even shade with: 14.22.1 ) Satin synthetic enamel paint
97549
-
-
Providing and laying French sprit polish on new wood work after preparing the surface by rubbing down smooth with sand papers, covering the kNOts, if visible, applying a coat of wood filler, cleaning the surface, applying 50 or more coats of French spirit polish till the surface gives high gloss.
2134
-
-
Providing and laying Melamine polish on new wood work (two or more coats) with spray machine after preparing surface by rubbing down smooth with sand papers, preparation of surface, applying 5 to 10 coats of french sprit polish, applying two coats of Melamine sealer and finally applying two coats of Melamine clear as per manufacturers specifications complete:
5531
-
-
Providing and laying PU polish on new wood work (two or more coats) with spray machine after preparing surface by rubbing down smooth with sand papers, preparation of surface, applying 5 to 10 coats of French sprit polish, applying two coats of PU sealer and finally applying two coats of PU clear as per manufacturers specifications complete:
566
-
-
Clearing and Grubbing Road Land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 m including removal and disposal of top organic soil NOt exceeding 150 mm in thickness if required and as per relevant clauses of section-200. A.) Area of light jungle
67.24
-
-
Excavation for roadway in soil using including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000metres as per relevant clauses of section 300.
12025
-
-
Excavation in Soil (by Mechanical Means.) Excavation for roadway in soil using mechanical means including loading in tipper for carrying of cut earth to embankment site and unloading with all lifts and lead upto 1000metres as per relevant clauses of section 300
422112.24
-
-
Removal of Unserviceable Soil with Disposal up to 1000metres including loading and unloading
77674
-
-
Add extra over item 3.1 to 3.2 & 3.7 to 3.8 above for transportation for disposal beyond 1.0 Km lead upto 10.0Km Vide item NO1.2 d of Chapter 1
77674
-
-
Construction of embankment/sub grade with Material Obtained from Borrow Pits (Construction of embankment with approved material/selected soil having C.B.R. 5 (unless specified otherwise in the contract) obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading slope &compacting to meet requirement of table 300-2)
975789
-
-
Construction of sub-grade with Material Obtained from Borrow Pits/Borrow Area (Construction of sub-grade with approved material/selected soil having C.B.R.8 (unless specified otherwise in the contract) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2)
117108
-
-
Construction of Embankment with Material Deposited from Roadway Cutting (Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2)
208107
-
-
Compacting Original Ground
Compacting Original Ground supporting sub grade Loosening of the ground upto a level of 500 mm below the subgrade level , watered, graded and compacted in layers to meet requirement of table 300-2 for sub grade construction
12025
-
-
Compacting Original Ground supporting embankment Loosening, leveling and compacting original ground to facilitate placement of first layer of embankment, scarified to a depth of 150mm, mixed with water at O.M.C. and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction
31525
-
-
Construction of shoulders as per Clause 408 with selected soil from borrow pits / borrow areas having CBR NOt less than 12 and shall have L.L. And P.I. NOt more than 25% and 6% respectively, inclusive of all leads and lifts, including clearing and scrapping of existing surface, providing required cross fall, compacting watering rolling and royalty charges etc. complete A ) With Vibratory Roller
6799
-
-
Granular Sub-base
Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in unifoRmt layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401 A) Plant mix method (with Mechanically crushed stone only) (a) For Lower Sub-base with i) Grading-III Material
4822
-
-
For Sub-base cum drainage layer or upper sub-base with (i) Grading-V Material
53194
-
-
Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in unifoRmt layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406.)
33719
-
-
Providing & laying precast interlocking concrete blocks of minimum compressive strength of 300 kg/sq.cm and approved size , shape/ pattern over coarse sand bed of thickness upto 40 mm and joints thick filled with fine sand including leveling with surface vibrator, temping and sweeping etc. complete as per IRC-SP-63-2004. D ) 60mm thick Polymer coated coloured precast interlock concrete blocks
79605
-
-
Footpaths and Separators (Construction of footpath/separator by providing a 150 mm compacted granular sub base as per clause 401 and 75 mm thick cement concrete base with PCC grade M-15, over laid with precast cement concrete tiles 25mm thick fixed in 20mm thick cement mortar 1:3 including provision of all drainage arrangements but excluding kerb channel excluding cost of GSB.) as per clause 410
4009
-
-
Providing and fixing guard stones 200 x 200 x 900 mm made of precast RCC M-20 grade fixed at 300 mm into the ground in P.C.C. 1:3:6 blocks of size 400 x 400 x 400 mm and given two coats of paint with white and black bands including excavation
50
-
-
Providing and fixing kerb stones 100 mm thick and 600 mm wide chisel dressed cut stones fixed in CC 1:3:6 (block size 250 x 225 mm) including all excavation
1000
-
-
Providing and Laying Pitching Stone / Boulder on slopes laid over prepared filler media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical Specifications as per Clause 2504.
49373
-
-
Prime coat (Providing and applying primer coat with oil based bitumen emulsion (SS-1, grade confiRmting to IS:8887) on prepared surface of granular Base including clearing of road surface and spraying primer using mechanical means as per clause 502. (i) on WBM/WMM surface @0.85 kg/sqm
157879
-
-
Tack coat Providing and applying tack coat with bitumen emulsion (RS-1, grade confiRmting to IS:8887) using emulsion pressure distributor on the prepared bitumiNOus/granular surface cleaned with mechanical broom and as per clause 503. (i) BitumiNOus Surface @ 0.25 kg/ sqm
24050
-
-
Granular surfaces treated with primes @ 0.30 kg/sqm
24050
-
-
Dense BitumiNOus Macadam (Providing and laying dense bitumiNOus macadam with minimum 40-60 TPH capacity HMP using crushed aggregates of specified grading, premixed with bitumiNOus binder @ 4.0 to 4.5% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause NO505 complete in all respects A ) With sensor paver finisher (ii) for Grading-II(26.5 mm NOminal size bitumen content 4.50%)
7894
-
-
BitumiNOus Concrete (Providing and laying bitumiNOus concrete with minimum 40-60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bitumiNOus binder @ 5.0 to 6.0% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause NO 507 complete in all respects) A ) With sensor paver finisher (iii) for Grading II (13.2 mm NOminal size) with bitumen 6.0 %
602
-
-
for Grading-I(19 mm NOminal size) with bitumen 5.5 %
4015
-
-
Seal Coat (Providing and laying seal coat for sealing the voids in a bitumiNOus surface laid to the specified levels, grade and cross fall including rolling and finishing using Type A and B seal coats as per clause 511) A ) Type-A (Providing and laying liquid seal coat comprising of an application of a layer of binder followed by a cover of stone chips of 6.7mm size)
24050
-
-
Direction and Place Identification signs upto 0.9 sqm size board. (Providing and erecting direction and place identification retro-reflectorized sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 2 mm thick with area NOt exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm fiRmtly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing)
40
-
-
Direction and Place Identification signs with size more than 0.9 sqm size board. (Providing and erecting direction and place identification retro- reflectorized sign asper IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 NO fiRmtly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing)
109
-
-
Type - A, W: Metal Beam Crash Barrier (Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanized by hot dip process, all fittings to confoRmt to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811.3)
1240
-
-
Construction of RCC open drain (i) Construction of RCC open drain 1.0m x 1.0m inside dimension lined with 150 mm thick RCC M-20 walls, 150 mm thick CC M-20 foundation, over 100 mm thick (Av) leveling course in PCC M-15 including excavation , dressing of sides and bottom, provision of HYSD reinforcement consisting 10 mm dia horizontal bars @ 150 mm c/c and L-shaped 10 mm dia vertical bars @ 150 mm c/c (L=1400 mm) including cutting, bending and binding wire, placing in position, providing shuttering and concreting by using concrete mixer, compaction by vibration etc complete as per drawings and technical specifications
13697.66
-
-
Construction of RCC open drain 0.60m x 0.60m inside dimension lined with 120 mm thick RCC M-20 walls, 120 mm thick CC M-20 foundation, over 100 mm thick (Av) leveling course in PCC M-15 including excavation , dressing of sides and bottom, provision of HYSD reinforcement consisting 8 mm dia horizontal bars @ 150 mm c/c and L-shaped 8 mm dia vertical bars @ 150 mm c/c (L= 800 mm) including cutting , bending and binding wire, placing in position , providing shuttering and concreting by using concrete mixer, compaction by vibration etc complete as per drawings and technical specifications
100
-
-
Providing and laying Reinforced Cement Concrete pipe NP 3 / prestressed concrete pipe. (Laying Reinforced cement concrete pipe NP3 /prestressed concrete pipe for culverts including fixing collar with cement mortar 1:2 but excluding bedding below pipes, excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . ) A) 450 mm dia
1070
-
-
Providing and laying of a reinforced cement concrete pipe duct, 300 mm dia., across the road ( new construction ) , extending from drain to drain in cuts and toe of slopes to toe of slopes in fills, constructing head walls at both ends, providing a minimum fill of granular material over top and sides of RCC pipes as per IRC: 982011, bedded on a 0.3 m thick layer of granular material free of rock pieces , outer to outer distance of pipes at least half dia of pipe subject to minimum 450 mm in case of double and triple row ducts , joints to be made leak proof, invert level of duct to be above higher than ground level to prevent entry of water and dirt, all as per IRC:98-2011 and approved drawings (ii) Double row for two utility service
1456
-
-
Plain cement concrete complete as per drawing and Technical Specifications PCC Grade M 15
11648
-
-
Manufacturing, supply & fixing of precast kerb stone of size 400mmx259mmx200mm thick made of M-20 concrete rectangular in shape with one corner chamfered by 100 mm x 100 mm as approved design i/c cost of all material, labour and curing etc. complete
20636
-
-
Construction of RCC Drain/Cover/Chamber (ii) Construction of RCC drain/chamber cover, placing in position, providing shuttering and concreting by using concrete mixer, compaction by vibration etc complete as per drawings and technical specifications excluding reinforcement. with RCC M-20
4136
-
-
Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in drain/cover/chamber complete as per Drawing and Technical Specifications. MT
414
-
-
Road Marking with Hot Applied TheRmtoplastic Compound with Reflectorizing Glass Beads on BitumiNOus Surface (Providing and laying of hot applied theRmtoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .finished surface to be level, unifoRmt & free from streaks & holes.)
8940
-
-
Providing & Fixing Delineator made of M.S. Hollow Rectangular Pipe (ConfoRmting to IS:4923) of cross section 96mmx 48mm of 1.20metrelength. The top of the hollow pipe, welded and closed with 16 gauge M.S. Sheet. The height of the Delineator above ground level should be between 0.8metreand 1.0metre. The bottom of the delineator should be provided with holdfast of length 15 cm on each side. Delineator should be painted with coat of Zinc Chromate stoving Prime and two coats of BIack Stove Enamel ( Oven Baked) paint with 3NO 15 cm bands of white Retro- Reflective Sheeting Of Engineering Grade pasted around the pipe and 2 NO High intensity Grade Retro Reflective Sheeting of size 8 cm X 10cm pasted on the top of each side of Delineator and treated With HLVA & fixing the same in M-15 grade concrete block of size 30X3OX3Ocms including transportation etc. complete. The construction and placement of the delineator must be asperlRC:79
500
-
-
Cast in Situ Cement Concrete M20 kerb (Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in PCC M20 grade on PCC M10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409)
28760
-
-
Cast in Situ Cement Concrete M20 Kerb with Channel (Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in PCC M20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409)
18019
-
-
Providing and fixing of retroreflectrorized cautionary, mandatory and infoRmtatory sign as per IRC:67-2012 made of Micro prismatic grade type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 1.5 mm thick supported on a mild steel frame of size 40 x 40 x 5 mm and mild steel angle iron post 75 mm x75 mm x 6mm fiRmtly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45cm x 60cm, 60 cm below ground level as per approved drawing) (I) 90 cm equilateral triangle (Cautionary/Warning Signs)
64
-
-
60 cm circular (Mandatory/Regulatory Signs)
64
-
-
90 cm high octagon (Stop Sign)
32
-
-
Painting on Concrete Surfaces A) Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces
25382
-
-
KilometreStone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) (ii) Ordinary Kilometerstone (Precast)
18
-
-
Hectometerstone (Precast)
72
-
-
Road Markers/Road Stud with Lens Reflector (Providing and fixing of road stud 100x 100 mm, die cast in aluminum, resistant to corrosive effect of salt and grit, fitted with lens reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bitumiNOus grout or epoxy mortar, all as per BIS:873, part-IV:1973)
711
-
-
Providing & Fixing; Object Marker of size 30 cm equilateral Triangle made of 1.5 mm thick Aluminum sheet pasted with High intensity Grade Retro Reflective Sheeting duly treated with HLVA complete with post of angle size 50x50x5 mm of 0.75 m and fixing the same in M 15 concrete block of size 30x30x30cm including transportation etc. complete.
96
-
-
For Roofs With Land Scaping / Terrace Garden treatment / area covered by solar reflective tiles: :
Providing and applying solvent free two component Polyurethane spray applied waterproofing system (manufactured by BASF India Ltd or equivelent product from Fosroc chemicals India Pvt.Ltd MYK Schomborg or Ardex endura India Pvt.Ltd ) on Landscape on horizontal and verticle face at 2mm total thickness . I/c applying moisture insensitive epoxy primer broadcasted with sand after necessary surface preparation followed by applying waterproofing membrane using specialized 2 component spray machine as per manufactures specifications . The mixed product should have 100% solid content as per DIN 53213, density of 0.9-1.0g/cm3, tensile strength of 8-10 Mpa as per DIN 53504, fast SETting less than 1 min and green certified
18217
-
-
Anti Root Barrier: Providing and laying anti root barrier membrane of M/s. E.I. Dupont (India) Pvt. Ltd., Master Seal 975 from BSF ,OR equivelent approved to the locations as shown in the drawings or as directed complete all as per manufactures specifications. Root Barrier shall be consisting of green colored Elvalloy polymer layer of approx. 25 GSM, fused onto Typar NOn woven polypropylene geotextile layer of 300 GSM, so that the total weight of the membrane is approx. 325 GSM with NOminal thickness of 0.8 mm. The membrane shall be loosely laid over the surfaces with an overlap of 50 mm between the adjoining rolls.
3028
-
-
For terraces over pre layed PUF insulation : 3.1 ) Providing and laying roof insulation with 60 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation confoRmting to IS - 12432 Pt. III (density of foam being 40-45 kg/ cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, Waterproofing shall be spray applied directly above PUF insulation (as per specifications, Payable extra) protection of waterproofing shall be done using 400 G polythene sheet and providing a wearing course with average 75 mm thick cement screed 1: 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm NOminal size) in chequered rough finish, in panels of 2.5 m x 2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge.
17774
-
-
For exposed area of walls(U.V. STABLE TOP COAT) .Protection of exposed waterproofing membrance with 2K-PU top coat , high solids, pigmented, UV stable for roofing systems and smooth surfaces. Providing and applying of Masterseal TC269 which is a pigmented , low viscosity , two component polyurethane topcoat. It cures to a elastic tough , hard wearing , glossing finish used over as top coat on Masterseal M800 water proofing system, coverage appx0.15-.20 kg/sqm ( characterics : Elongation at break ( after 14 days) DIN53504 - 165 : Tensile strength (after 14 days) DIN53504 - 12 : Tear resistance (after 14days) DIN 53515 -70 manufactured by BASF India Ltd or equivelent product from Fosroc chemicals India Pvt.Ltd MYK Schomborg or Ardex endura India Pvt.Ltd )
1847
-
-
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 10 mm) with SRI (solar refractive index) 78, solar reflection 0.70 and initial emittance 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kgof organic coated filler of desired shade (0.10 kgof hardener and 0.20 kgof resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.
13018
-
-
The cleaning and preparation of the substrate on which the waterproofing coating is applied must be carried out thoroughly by water jetting or grit blasting to leave a sound base for the application. Any laitance present on the surface must be removed mechanically. Release oil and other contaminants which may impair adhesion must be removed prior to the application. Surface moisture shall be below 4% prior to commencing application of this modified polyurethane waterproof membrane system 6.1 ) External wall and floor Water proofing Application of waterproofing Coating :
Providing and applying a Liquid, cold-applied elastomeric waterproofing membrane system such as, MasterSeal HLM 5000 (manufactured by BASF India Ltd or equivelent product from Fosroc chemicals India Pvt.Ltd MYK Schomborg or Ardex endura India Pvt.Ltd )strictly to the written application guidelines of the manufacturer. The elastomeric, seamless waterproof membrane shall exhibit the following key perfoRmtanceproperties. Applied in 2 coats to a DFT of 1.5mm thick Having an elongation capacity over 600% , Tensile Strength: 150 psi (1.0 MPa), ASTM D412. with solid content more than 85% applied on the RCC surface, As per specification. And complying to ASTM C 836 Coverage – 2.5 kg/ sqmt
745
-
-
INTERNAL WATERPROOFING (Walls and floors):
Providing and applying equivelent to MasterSeal 551 of BASF from M/S Fosroc or Grace , system as follows, Surface preparation, prewetting the surface and applying elastomeric cementitious waterproof coating, in two coats, second coat to be applied on the first coat. The material shall be mixed and applied fully in accordance with the manufacturer's instructions. The product shall exhibit at least 40% elongation at ambient & 30% elongation in under water condition with tensile strength greater then 20 kg/cm2.The product shall resist 1.5 bars pressure when tested as per DIN 1048 at 2mm DFT. When applied at 2mm DFT, elastomeric coating shall be able to bridge crack up to 0.5mm width, etc complete as per manufacturer’s specifications.
632
-
-
PROTECTIVE COATING Providing and applying Masterprotect 1818 (manufactured by BASF India Ltd or equivelent product from Fosroc chemicals India Pvt.Ltd MYK Schomborg or Ardex endura India Pvt.Ltd )a NOn-toxic, high build epoxy coating, solvent-less, taint free potable grade, protective coating. The product shall exhibit excellent bond strength with the substrate at least exceeding 1.5 MPa, when tested as per ASTM D4541. The product shall be foRmtulated to have high build thickness exceeding 200 microns per coat on average and shall be applied to achieve overall thickness of 400 microns in two coats. The product must be approved by reputed institute such as CFTRI for use in contact with potable water.
551
-
-
Sealing around Preinstalled pipes: Grouting and sealing around the periphery joints of pipes passing through the floor and walls in various locations by filling micro concrete in the gap between the cut outs in the slab and the pipe surface applying HYDROSWELL HDPS swellable sealant around the pipe in the centre of the cutout and applying Pre packed NON SHRINKAGE POLYMER MODIFIED MORTAR , waterborne, liquid applied seamless treatment in 2 coats, around the periphery joints of the pipes at the top etc. complete. (Approved manufacturers BASF ,SIka or Grace) (NOte: pipe diameter75mm to 150mm in 100 mm to 200mm thick wall or slab)
453
-
-
Providing and fixing ISI marked 50mm flush door shutters confoRmting to IS :2202 (Part I) decorative type, core of block board construction with frameof 1st class hard wood and well matched teak 3 ply veneering with verticalgrains or cross bands and face veneers on both faces of shutters.
487
-
-
Providing and Fixing 304 grade SS wiremesh in uPVC doors and windows including the cost of all required accessories complete.
2848
-
-
Providing and Fixing glass fiber wire mesh in uPVC doors and windows including the cost of all required accessories complete.
589
-
-
Supply and fixing of SS Ball Bearing Hinges of size 102x72x3xmm with four bearings equivelent to DHS 234 S of Kich in SS 316 Garde with necessary screw etc.scomplete
1317
-
-
Supplying and fixing dry cladding system with HPL from M/S FundeRmtax , Stylam Industries Ltd.(Fascia )or with Century Exterior HPL Exteria -high-quality exterior grade decorative cladding for balconies and building facades with NOn corresive rivets. The material should confiRmt to EN 438-6 type EDF (resistance against extreme climatic conditions and UV) and rates of fixing ,includes base frame which consist of aluminium frame size 25mmX50mm , fixed in grid size 600mm c/c with necessary powder coated bolts, caps etc, complete
3644
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with inteRmtediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, cation and direction of the Engineer in Charge but excluding the cost of painting, it shall be fixed in a direction perpendicular to G.I. inteRmtediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeterchannels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeterof ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeterchannel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recomme-nded jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeterchannels suitably fixed, all complete as per drawings, specification. 12.1 ) 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.
6961
-
-
Providing and fixing at the locations shown in the drawings false ceiling system equivelent to Ecophon FOCUS LP - Linear profile grids system for highlighting direction in a room with 20 mm thick tiles , easily demountable , option of daily dusting & vacuum cleaning, weekly wet wiping , manufactured from High density glass wool utilizing 3RD techNOlogy with the visible surface has an Akutex FT coating and the back of the tile covered with glass tissue . 85% light reflectance (of which 99% is diffuse reflection). Tiles should be classified under absorption class A with "alpha w " value of 0.9 at minimum 75mm O.D.S. The system should have Sound Absorption NRC value of 0.9 (according to EN ISO 11654). Tiles should withstand a peRmtanent ambient RH up to 95% at 30 * C without sagging , warping or delaminating (ISO 4611). Certified by the Indoor Climate Labelling, emission class M1 for building materials and recommended by the Swedish Asthma and Allergy Association. Granted the NOrdic Swan eco-label. Fully recyclable. The glass wool core of the tiles should be tested and classified as NOncombustible according to EN ISO 1182 with reaction to fire classification class A2 s1 d0 according to EN 13501 - 1 - European Standard. Systems are classified as fire protective covering according to NT FIRE 003.
Rate shall be inclusive of all labour ,material ,T&P including staging and scoffolding complete for sizes 600x300 /600x 600 /1200x 300 or 1200x 600 mm
3401.5
-
-
Providing and fixing at the locations shown in the drawings wall panel system equivelent to Ecophon Wall Panels A Akutex FT ,using wooden batten (Local) of 28mm Thick and 1.5 inch width as per wall panel size and then take the gripper (PVC) & wooden batten and nail them in the wall. Then cut the wall panel from the back side (Just a little bit) and make the grove .Nail the wood batten and griper(PVC) in the wall and make it 40mm.Apply SR998/ Moccsudal SF 200 and paste the wall panel. Tag the fabric in the griper (PVC) as per design.Ecophon WALL PANEL A Akutex FT 1200 x 2700 mm with 40 mm natural square edge, demountable panels with standard approved fabric wrapped around in concealed system with grippers, option of Daily dusting, vacuum cleaning. Panel is manufactured from high density glass wool utilizing the 3RD techNOlogy. Tiles classified under absorption class A with alpha w value of 0.9 at minimum 40mm O.D.S.. Classification according to EN ISO 11654, & single value ratings for NRC value 0.9 & SAA according to ASTM C 423. Panels withstand a peRmtanent ambient RH up to 95% at 30*C & RH upto 75% at 30*C without sagging, warping or delaminating (EN13964).Certified by the Indoor Climate labeling, emission class M1 for building materials & recommended by Swedish Asthma & Allergy Association. Granted The NOrdic Swan eco-label. Fully recyclable. The glass wool core of the tiles should be tested and classified as NOncombustible according to EN ISO 1182 with reaction to fire classification class A2 s1 d0 according to EN 13501 - 1 - European Standard.Rate shall be inclusive of all labour ,material ,T&P including staging and scoffolding complete .
4471
-
-
Providing and laying anti skid rectified Ceramic glazed floor tiles of size 600x600 mm (thickness to be specified by the manufacturer) of 1st quality confoRmting to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4Coarse sand), including pointing the joints with white cement and matching pigment etc, complete.
6156
-
-
Providing and fixing Ist quality joint free digital ceramic wall highlighter tiles of 300 X 600 mm in size and confoRmting to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing in white cement mixed with pigment of matching shade complete.
21701
-
-
Supplying and fixing in position at the location as shown in the drawings or as directed by Engineer Incharge following type of satin finish stainless steel signages 316 Grade with counter sunk S.S.316 grade Screws complete. 17.1 ) S.S.316 Grade Sign Plate of 120 X 120 X 1.5 mm - for direction and Disabled signages etc.
69
-
-
S.S.316 Grade Sign Plate of 120 X 120 X 1.5 mm - for male&/female ,Fire,Pull ,Fire Exit signages etc.
110
-
-
Design, supplying and installing PVDF coated aluminium louvered panel equivelent to Luxalon® 132S sun louver system as manufactured by Hunter Douglas India Pvt. Ltd or equivalent . The system shall consist of Z -shaped panels fixed on aluminium extruded brackets. The panels shall be of dimension 98.5mm X 132mm with back rolled round edges and manufactured from 0.6mm thick aluminium coil coated with scratch resistant Luxacote® finish. The clamps belonging to the system and aNOdized to 20 microns shall be fixed to the approved substructure as per required 150mm module size. Clamps shall be fixed at 150 mm from panel edges and maximum center-to-center spacing of 750MM TO 1000MM all properties and specifications shall comply with ECCA directives and more specifically EN 1396:1996. The front side of the panel shall be of approved colour having Luxacote® finish consisting of 3 layers of coating 24- 30microns thick and the backside shall have standard white polyester coating.( Flat area of the surface covered with louvers shall be measured and payed for.)
1664
-
-
Providing and fixing Glass Reinforced Concrete (G.R.C) screens in approved size, pattern, design, thickness and approved color from f M/S UniStone or equivalent approved. The screens should be made from 53 grade Cement manufactured by JK Cement or equivalent, Fine graded Quartz & Silica Sand, Alkali Resistant Glass Fiber manufactured by N.E.G. JAPAN or equivalent, Super Plasticizers manufactured by BASF or equivalent, Polymers manufactured by BASF or equivalent and U.V resistant Synthetic iNOrganic pigments should be used for pigmentation manufactured by BAYFERROX (GeRmtany) or equivalent. The material casting should take place in FRP Mould or equivalent. The fixing of Screens should be done with Dry fixing methodology i.e. to be done with M.S. Galvanized L shaped Clamps, dash fasteners and pins, as per approved shop drawings from Engineers in charge.Rates are inclusive of all the operations described above for all heights and leads including all scaffolding ,staging ,T&P and sundries eic.
2627
-
-
Supply and fixing of Stainless steel AISI 316 grade satin finished door Hinges with four bearings, of size 127x76x3xmm and SS self tapping philips cross head screws , equivelent to Kich DH 235S.
18497
-
-
Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness confoRmting to IS : 13592 (4kg/sqcm) including required couplers & Fittings, jointing with seal ring confoRmting to IS : 5382 leaving 10 mm gap for theRmtal expansion etc complete. Type A for Rain Water and Type B for Soil and Waste 110 mm dia pipe
26582
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes in concealed in wall, having theRmtal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints including cutting chases and making good the walls etc complete as per direction of Engineer in Charge. 15 mm NOminal outer dia .Pipes.
11910.57
-
-
20 mm NOminal outer dia .Pipes.
16575.07
-
-
25 mm NOminal outer dia .Pipes.
5928.15
-
-
Providing and laying above terrace/inside shaft / in trenches G.I. pipes medium class complete with G.I. fittings including if required excavation of trenches, refilling the same and testing of joints complete: 25 mm dia. NOminal bore
1632.04
-
-
32 mm dia. NOminal bore
26265.69
-
-
40 mm dia. NOminal bore
2010
-
-
50 mm dia. NOminal bore
9636
-
-
Painting G.I. pipes and fittings with synthetic enamel white paint over a red oxide zinc chromate priming coat, both of approved quality for new work : 25 mm dia. NOminal bore
1432.04
-
-
32 mm dia. NOminal bore
26265.69
-
-
40 mm dia. NOminal bore
2010
-
-
50 mm dia. NOminal bore
9636
-
-
Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end):
25 mm dia
525
-
-
32 mm dia
2323
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm NOminal bore
124
-
-
20 mm NOminal bore
123
-
-
25 mm NOminal bore
373
-
-
Constructing masonry Chamber 90x90x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C. I. surface box 100 mm. top diameter, 160 mm bottom diameterand 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm NOminal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm NOminal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :
85
-
-
Providing and fixing gun metal NOn- return valve (vertical type) of approved quality (screwed end) :
50 mm dia
374
-
-
Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm NOminal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm NOminal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :
776
-
-
Making Khurra 45x45 cm with average minimum thickness of 5cm cement concrete 1:4 (1 cement: 2coarse sand: 4 graded stone aggregate of 20mm NOminal size) over PVC Sheet 1m x 1m x 400 micron, finished with 12mm cement plaster 1: 3 (1 cement: 3coarse sand) and a coat of neat cement, rounding the edge and making and finishing the outlet complete.
956
-
-
Providing and fixing gun metal NOn- return valve (horizontal type) of approved quality (screwed end) : 50 mm NOminal bore
402
-
-
Providing and placing in position C.I. double acting air valve of approved make. 50 mm dia
174
-
-
Providing and fixing enclosed type wateRmtetre(bulk type) confoRmting to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) :
80 mm dia NOminal bore
388
-
-
Providing and fixing C.I. dirt box strainer for bulk type wateRmtetrewith nuts, bolts, rubber insertions etc. complete confoRmting to IS : 2373 : 80 mm dia
388
-
-
Providing and fixing vitreous china pedestal type water cloSet(European type) with inbuilt 10 litre low level vitreous china flushing cistern, ISI marked plastic seat and lid (same colour), mosquito proof coupling complete:
619
-
-
Providing and fixing water cloSetsquatting pan (Indian type W.C. pan), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) confoRmting to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Orissa pattern W.C. pan of size 580x440 mm
479
-
-
Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :
White Oval or round size 560x410mm.
855
-
-
Providing and fixing 15 mm NOminal bore C.P. brass fittings of approved make and confoRmting to IS:8931 including C.P. brass extension if required:
Basin mixer pillar tap with spout (1000 grams)
988
-
-
Health foscet (hand jet) with flexible connection pipe (for WC)
870
-
-
CP brass water jet to be fixed in seat cover of WC with flexible connecting pipe
1
-
-
Bib cock (400gms)
1277
-
-
Toilet paper holder
817
-
-
Towel Ring (150 mm Dia)
765
-
-
Angle valve for basin mixer, geyser points, WC Cistern (450gms)
1738
-
-
Wall mixer with elegant kNOb (1400gms)
354.5
-
-
Shower rose (revolving type) (150mm)
709
-
-
Wall mixer (tele-phonic type) with crutch arrangement for hand shower (1400gms)
354.5
-
-
Stop cock (concealed) (600gms)
347.6
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
25 mm dia. NOminal bore
285
-
-
Providing and fixing 15 mm NOminal bore uplasticised PVC connection pipe with PTMT nuts and PVC bush of approved quality and colour: 45 CM length
1738
-
-
Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete:
Flat back half stall urinal of size 460x380x250mm
344
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :
560x410 mm bowl depth 215 mm.
500
-
-
Providing and fixing 15 mm NOminal bore C.P. brass fittings of approved make and confoRmting to IS:8931 including C.P. brass extension if required: Bottle trap Setwith extension pipes
855
-
-
Kitchen sink mixer with cast swivel spout (1000 grams)
500
-
-
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete 32 mm dia
500
-
-
40 mm dia
500
-
-
Providing and fixing PVC waste coupling in wash basin/ sink. 25mm
500
-
-
40 mm dia
500
-
-
Providing and fixing cast iron grating for gully trap. 150x150mm square
1000
-
-
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
5mm thick mirror
769.5
-
-
Providing and fixing on wall face or under floor UV stabilized
Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall
thickness confoRmting to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring confoRmting to IS : 5382 leaving 10 mm gap for theRmtal expansion etc complete.
75 mm dia pipe
600
-
-
Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes confoRmting to IS : 13592 (heavy) jointing with seal ring confoRmting to IS : 5382 leaving 10 mm gap for theRmtal expansion.
Tee/ Tee with door/ Bend 45°/ Bend 90° 75 mm dia
960
-
-
110 mm dia
9384.76
-
-
Double "Y" with or without door 75 mm dia
240
-
-
110 mm dia
1428.57
-
-
Vent covel 75 mm dia
240
-
-
110 mm dia
1764
-
-
P trap 110mmx110mm long
1277
-
-
Nahani trap 110x75mm
1277
-
-
Multi floor trap 110
127.7
-
-
Providing and fixing stainless steel drain jali of approved make/quality.
2554
-
-
Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
110 mm dia
3506.87
-
-
Providing and laying G.I. pipes medium class complete with G.I. fittings including if required excavation of trenches, refilling the same and testing of joints complete: 32 mm dia. NOminal bore
7515
-
-
40 mm dia. NOminal bore
2010
-
-
50 mm dia. NOminal bore
24109
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
300000
-
-
Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: (dia of main line to be measured)
25 mm NOminal bore
880
-
-
32 mm NOminal bore
440
-
-
50 mm NOminal bore
440
-
-
60 mm dia. NOminal bore
429
-
-
Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality
65 mm dia. NOminal bore
429
-
-
Providing and constructing brick masonry road gully chamber 50x45x60 cm with well burnt modular clay bricks crushing strength NOt less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per
standard design.
1572
-
-
Constructing brick masonry manhole with fly ais crushing strength NOt less than 35kg/ cm² in cement mortar 1:4 ( 1 cement : 4 coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm NOminal size), foundation in cement concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm NOminal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm NOminal size) finished with a floating coat of neat cement complete as per standard design : Manhole of depth 0.91m.
122.5
-
-
Providing and constructing extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m and upto 1.67m
122.5
-
-
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar confoRmting to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's peRmtanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm NOminal size) complete as per design. ( Type D )
1217
-
-
Supplying and fixing C.I. cover without frame for SUMP TANK & O.H.T. :
455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be NOt less than 23 kg
204
-
-
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm NOminal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 250 to 300 mm diameter
119
-
-
For pipes 350 to 450 mm diameter
6
-
-
Providing and constructing brick masonry chamber for underground C.I. inspection chamber and bends with well burnt modular clay bricks crushing strength NOt less than 35kg/cm² in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be NOt less than 38 kg(weight of cover 23 kgand weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm NOminal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm NOminal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :
2200
-
-
Providing, lowering, laying, aligning, fixing in position at and jointing at all level/ depths ISI marked HDPE pipes of PE-100 grade and PN 6 for sewer application as per IS 14333-1996 (amended upto date) in trenches in complete including all material, labour, testing and commissioning as per
direction of Engineer.
150mm dia
7869.6
-
-
200mm dia
8755
-
-
Cutting holes more than 20x20 cm and upto 30x30 cm in walls including
making good the same :
5000
-
-
Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm NOminal size) including finishing complete so as to make it leak proof.
7500
-
-
Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
7500
-
-
Making hole upto 20x20 cm and embedding pipes upto 150 mm diameterin masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm NOminal size) including disposal of malba.
3000
-
-
Providing and laying Reinforced Cement Concrete pipe NP 3 / prestressed concrete pipe on first class bedding. (Laying Reinforced cement concrete pipe NP3 /prestressed concrete pipe for culverts on first class bedding of granular material including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets).
450 mm dia
11173
-
-
Supply, erection, jointing, testing and commissioning of C class MS pipe (as per IS: 1239 ) including necessary specials such as tees, bends, flanges, reducers, nuts, bolts, gaskets etc., complete on wall/ ceiling. The pipes to be erected on wall or suspended from beam/ RCC roof slabs with suitable size MS bars/ angle irons including painting of metal part except pipe line
80 mm Dia
220
-
-
100mm dia.
2
-
-
150mm dia.
300
-
-
Painting for M.S. pipe with a coat of red oxide primer and two or more coats of synthetic enamel paint of approved colour and Quality to give an even shade including surface preparation. 80 mm Dia
220
-
-
100mm dia.
2
-
-
150mm dia.
320
-
-
Supply, erection, jointing, testing and commissioning of C class MS pipe (as per IS: 1239 ) including necessary specials such as tees, bends, flanges, reducers, nuts, bolts, gaskets etc., in ground including excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar / asphaltic tape as per IS:10221, refilling the trench etc. complete of following sizes as required. 150mm dia.
3300
-
-
Providing and applying one coat of 4 mm thick anti rust pipe protection including approved primer as per manufacturers specifications and lap of 25 mm to make an impeRmteable layer on MS pipes in trenches or on structural/masonary members complete including surface preparation
150 mm dia
3300
-
-
Supplying and fixing single headed internal/ external hydrant valve with instantaneous Gun metal couplings of 63 mm dia with cast iron wheel ISI marked confoRmting to IS 5290 (Type ‐ A) with blank Gunmetal cap and chain.
84
-
-
Supplying and fixing 63 mm dia, 15 mtr. long Flax canvas hose pipe with 63 mm dia Male and Female Stainless Steel‐IS:3444 rade‐1 couplings duly binded with GI wire, rivets etc. confoRmting to IS 636 (Type ‐A) as required.
168
-
-
Supplying & fixing 63 mm dia Stainless Steel IS: 3444 Grade‐1 branch pipe with 20 mm (NOminal internal diameter) size Gun Metal NOzzle confoRmting to IS 903, suitable for instantaneous coupling connection to connect hose pipe coupling as required.
84
-
-
Supplying and fixing of MS hose cabinet box of size 900 mm x 600 mm x 500 mm made of 2mm MS sheet and 40 x 40 x 5mm angle iron with front openable cover having 6 mm thick glazed glass doors i/c necessary locking arrangement on existing wall/ brick platefoRmt etc. suitable to accommodate external hydrant with butterfly valve, 2 NO 15 mtr. long Hose
84
-
-
Providing, installation, testing and commissioning of dual plate NOn return valve of following sizes confiRmting to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 80mm dia
4
-
-
150mm dia
22
-
-
Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, duly ISI marked complete with Nuts, Bolts, washers, gaskets, confoRmting to IS 13095 of following sizes as required.
80mm dia
40
-
-
150mm dia
2
-
-
Providing and fixing brass/ GM ball valve (full bore type) with plastic coated lever and screwed female ends tested to 20 kg/ cm2 of approved quality as specified.
50 mm dia
2
-
-
Providing and fixing fire brigade 63mm dia GM suction coupling to 100/ 150 mm dia suction pipe complete
2
-
-
Supplying and fixing 150mm dia CI foot valve in suction line from water tank complete
2
-
-
Supplying and fixing 150mm dia CI strainer in suction line from water tank complete
2
-
-
Supplying, fixing, testing and commissioning of following size Y-STRAINER of Ductile CI Body flanged ends with stainless steel strainer for for chilled water/ hot water line duly insulated to the same specifications as the connected piping and adequately supported as per specifications.
80mm dia
2
-
-
150mm dia
6
-
-
Providing and fixing M.S. structural work fabricated from standard sections, (MS rounds, angles, channels etc.) including cutting to size,drilling welding including cost of steel (Hilti) fasteners, clamp in RCC structural members as directed, including two or more coats of synthetic enamel paint over one coat of red oxide primer after surface preperation including cutting and making good walls.
1000
-
-
Providing and fixing C.I. double flanged sluice valves rated to PN 1.6 with C.I. Wheel bolts, nuts,washers 3mm thick insertion rubber gasket including matching flanges table E, complete. 80 mm / 100mm dia
4
-
-
150 mm dia
12
-
-
Supplying and fixing 4 way fire brigade connection of cast iron body with 4 NO Gun metal male instantaneous inlet couplings complete with cap and chain confoRmting to IS 904 as reqd. Including connection to existing MS pipe line complete as required.
2
-
-
Providing and constructing masonry chamber 90x90 x100 cms inside with 3.5 class designation fly ash brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for wateRmtetre/ sluice valve/ etc, M.S. cover of size 600mm x 600mm with M.S. frame and 6mm thick sheet with locking arrangement etc complete.
2
-
-
Providing and fixing gunmetal single acting air release valve with screwed inlet 25 mm dia. and with necessary G.I. Coupling
8
-
-
Providing and fixing standard fireman's axe ( tested for 20000 Volts) with heavy insulated rubber handle.( ISI marked)
84
-
-
Providing and fixing pressure switch with suitable for 1‐10 kg/cm2 including 12/15 mm dia isolation valve, G.I. Nipple, elbow, electrical connections SETting of Cut‐In and cut‐Off pressure complete in all respects.
12
-
-
Supplying and installing Air Vessel of 300 mm dia, 1.5m in height made of 5mm thick MS sheet including painting with one primer and two finish coats complete as per specification.
2
-
-
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required
10
-
-
Providing and fixing heavy duty PVC insulated, PVC aRmtoured aluminium conductor cables 1100V grade including necessary support clamps and connection lugs complete in all respects.
Power cable 3core 16 sqmm.
128
-
-
Power cable 3.5 core 70 sqmm.
92
-
-
Supply and erecting following ISI marked Fire extenguishers on wall/ column including erecting bracket etc complete.
ABC type 6 kg
70
-
-
CO2 type 4.5 kg
70
-
-
Supply, installation, testing and commissioning of 150 mm dia flanged type water flow alaRmt check valve with ductile iron body, bronze seat ring and cast iron/ductile iron clapper, suitable for operation in working pressure range of 1.4 bars to 20 bars complete with pressure gauges with brass isolation valves, by-pass check valve, main drain valve, alaRmt test valve, turbine principled alaRmt gong, strainer and test teRmtinal box as per technical specifications and all requirements of contract works.
2
-
-
Providing and fixing inspector 25mm dia test assembly complete with test valve, sight glass sectional drain valve, union; necessary piping, threading, jointing & with corrosion resistant orifice all complete as per technical specifications and all requirements of contract works.
2
-
-
DESIEL ENGINE PUMP Supplying, Installation, Testing and Commissioning of Diesel engine driven main fire pump suitable for automatic operation and consisting of following: complete in all respect as required. Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm at highest and farthest outlet at specified flow of 2280 lpm at 60 m. head confoRmt Suitable of 50 BHP, 1500 RPM water cooled with radiator, diesel engine confoRmting to relevant BS& IS standard complete with auto starting mechanism, 12 volts/24 Volts electric staring equipment, Diesel Tank, exhaust pipe extended upto 1 m. outside pump house. M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered with anti vibration pads.
2
-
-
ELECTRICAL PUMP Supplying, Installation, Testing and Commissioning of Electric driven main fire pump suitable, for automatic operation and consisting of following: complete in all respect as required. Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm at highest and farthest outlet at specified flow of 2280 lpm at 75m head, 60 HP Squrrel cage induction motor, TEFC, synchroNOus speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, confoRmting to IS:325.
M.S fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered with anti vibration pads.
2
-
-
JOCKEY PUMP Supplying, Installation, Testing and Commissioning of Electric driven pressurisation pump suitable for automatic operation and cosisting of following: complete in all respect as required. Horizontal type, singlestage, centrifugal pump of cast iron body and bronze impelier with stainless steel shaft, mechnical seal and flow of 180 lpm at 75 m. head confoRmting to IS : 1520. Suitable 10HP Squrrel cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, confoRmting to IS : 325.M.S fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered with anti vibration pads.
2
-
-
Fabricating, supplying, Installation, testing and commissioning of electrical control panel of cubicle construction, floor mounted type, fabricated out of 2 mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and veRmtin proof, cable alley inter connection, having switchgears and assessories mounting and internal wiring, earth teRmtinals, numbering etc. complete in all resects, suitable for operation on 415 V, 3 phase, 50 Hz AC supply with enclosure protection class IP 42 as required.
2
-
-
Providing and Fixing, testing and commissioning of white vitreous china wall mounting cascade type water cloSetJaquar Cat NO DRS-37951 with CP bolts, nuts, CI chair hanging arrangements, seat & soft close seat cover with CP hinges & rubber buffers, CP brass screw, washer, P/S trap/bend, bracket, connection to main pipe on shaft with all accessories, connectors with rubber lip / buffer and side gap filled with silicon sealant wherever required with concealed type dual flush cistern & Plate & Rack Bolt Screw- Jaquar Cat NO JCS-WHT-2400FS & JCP-CHR-352415 & ZPS-MST-RB02 comprising of actuator button facia assembly including brass / SS screws , fastner,and washer complete, cutting and making good the walls floors wherever required .
209
-
-
Providing and fixing water cloSetsquatting pan ( Orissa type W.C. pan ) Jaquar Cat NO ECS-WHT-451 LE, with 100 mm sand cast Iron P or S trap, with concealed type dual flush cistern & Plate - , Cat NO JCS-WHT-2400WS & JCP-CHR-352415 comprising of actuator button facia assembly including brass / SS screws , fastner,and washer complete, cutting and making good the walls floors wherever required with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
58
-
-
Providing and Fixing, testing and commissioning of vitreous china white over counter wash basin of Jaquar Cat NO DRS-WHT-37601 with 32 mm dia C.P. brass bottle trap Jaquar Cat NO ALD769L300X190 with CP brass waste Jaquar Cat NO ALD727, wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required.
254
-
-
Providing and Fixing, testing and commissioning of CP brass Central single hole /Single lever basin mixer of Jaquar Cat NO VGP-81005NB without pop up waste with 600mm long braided hose complete including cutting and making good the walls where required.
326
-
-
Providing and fixing Jaquar Cat NO ACN-1161N robe hook fixed to PVC rawl plug with CP brass screws as per direction of Engineer in Charge.
68
-
-
Providing and Fixing, testing and commissioning of hand spray (Health faucet) of Jaquar Cat NO ALD573 with flexiable hose connection, regulator with flexible pipe 1.2 m long, wall hooked complete as required, with Two way Bib Cock Jaquar Cat NO VGP-CHR-81041
267
-
-
Providing and fixing 15mm dia. C.P. brass Short body bib cock of Jaquar Cat NO VGP 81037 including cutting and making good the walls wherever required complete as per directions of Engineer incharge.
335
-
-
Providing and fixing C.P brass toilet paper holder of Jaquar Cat NO ACN1153N including cutting and making good the walls wherever required complete as per directions of Engineer incharge.
267
-
-
Providing and fixing of towel ring of Jaquar Cat NO ACN1121BN complete in all respects including cutting and making good the walls required. Only attached Toilets
252
-
-
Providing and fixing, jointing and testing of 15mm dia C.P. brass angle valve of Jaquar Cat NO VGP 81053 with C.P. brass wall flange with any other items complete including cutting and making good the walls wherever required as per direction of Engineer-Incharge.
535
-
-
Providing and fixing steel grab bar of Jaquar Cat NO AHS1507
12
-
-
Providing and Fixing, testing and commissioning of CP Braided hoses connection of Jaquar Cat NO ALD805B of 450 mm long including nuts and washers and making connection to fixtures and fittings complete as required.
535
-
-
Providing and fixing white vitreous china URS-WHT-13261 having water inlet from, top with Presmatic PRS-CHR-077 , Bottle trap- ALD-CHR-769L300X190 , Waste Coupling ALD-CHR 705. including fixing to wall with suitable brackets all as per manufacturers specification and direction of brackets all as per manufacturers specification and direction of engineer-in -charge.
8
-
-
Providing and fixing vitreous china flat back urinal basin Jaquar Cat NO URS-WHT-13253O with C.I. Hangers, C.P. spreader with short bent, electronic flushing system comprising of electronic & electrical items including infrared photo cells eyes, electronically operated soleNOid valve, step down equipment, electric operated, concealed copper piping etc.with P-trap siphon and concealed urinal sensor of Jaquar Cat NO SNR-STL-51087 & connection kit for urinal and any other item required to provide satisfactory functioning, waste and jali to prevent napthelene balls from going inside the pipe and connecting pipe to wall with C.P. flange complete including cutting and making good the walls and floors where required.
171
-
-
Providing and Fixing, testing and commissioning of ABS+PMMA Whirlpool Combi system, of Jaquar Cat NO Fusion JWP-WHT-GMI140CX, 1400 x 1400 x 450 with 10 water jets, 12 air jets, 1hp water pump, Air pump of 0.5 hp, over flow cum pillar, whitel light, electronic control, level censor frame with head rest and angular panel JWA-WHT-FUSNCPX, and composite Divertor, FLR-CHR-5671HF , Shower rail SHA-CHR-1197N, Flexi tube with 12mm dia and 1.5m long with nuts SHA-CHR-549D12, Hand Shower 32 mm round shape, straigth design, Dual flow with Rubit cleaning system- HSH-CHR-5541, Wall outlet, 30mm, 40mm long round, shape with 15mm thread to coinnect Hand shower pipe and flange- SHA-CHR-1195R, and along with wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required. .
4
-
-
Providing and Fixing, testing and commissioning of ABS+PMMA Built in Bath tub, of Jaquar Cat NO Fusion JBT-WHT-KUBIX180X, 1800 x 800 x 470 with head rest- JWA-BLK-HRCP750GAC06 and Front panel JWA-WHT-KUBIXFPX, side panel JWA-WHT-KUBIXSPX, and bath tub filler ,with hand Shower divertor and filler - JWA-CHR-ACC00820X including complete SET, drain connection pipe with overflow- JWA-CHR-DRNPIPE70, on Atlas frame IWA-CHR-ACC0051SSX, along with wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required. .
25
-
-
Providing and fixing S.S finish Countertop Manually operated liquid soap dispenser with glass bottle Jaquar Cat NO CAN-CHR-1135 .
252
-
-
Providing and fixing fully automatic hand drier of / Jaquar Cat NO HDR-SAP-M99ACS complete to the satisfaction of Engineer in charge suitable to operate on 220 volts, single phase 50 hz, A.C. power supply.
196
-
-
Providing and fixing CP brass Sink Mixer Cock- Wall Mounted (Jaquar Cat. NO VGP-CHR-81165 , including cutting and making good the walls wherever required.
31
-
-
Providing and fixing CP brass Sink Mixer Cock- PlatfometeRmtounted with dual flow and pulled down mouth (Jaquar Cat. NO AKF-CHR-77175B , including cutting and making good the walls/ platfometer/ stone finish wherever required.
4
-
-
Providing and Fixing, testing and commissioning of shower Panel of Jaquar Cat NO JPL-WHT-G0843JAX including wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required. .
39
-
-
Providing and Fixing, testing and commissioning of shower Panel of Jaquar Cat NO GPL-SSF-ST88158B including wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required. .
8
-
-
Providing and Fixing, testing and commissioning of shower Cubicle of Jaquar Cat NO JSE-CHR-ENNAT1512X including wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required. .
40
-
-
Providing and Fixing, testing and commissioning of Steam module of Jaquar Cat NO ASG-WHT-PIUVAP1117 - 6 KW including wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required. .
4
-
-
Providing and Fixing, testing and commissioning of Steam Cabin of Jaquar Cat NO ASG-WHT-BOXJAQ1201 including All showers, vertical body SPA, steam, themeterostat, chromo therapy lights, Aroma Therapy, Control Touch Panel with Entertaintment system and necessary wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required. .
2
-
-
Providing and Fixing, testing and commissioning of Towel Rack of Jaquar Cat NO AHS-CHR-581H with flexiable hose connection, regulator with flexible pipe 1.5 m long, wall hooked complete as required.
32
-
-
Providing and Fixing, testing and commissioning of Jaquar Cloth Liner AHS- CHR-1565 with flexiable hose connection, regulator with flexible pipe 1.5 m long, wall hooked complete as required.
9
-
-
Providing and Fixing, testing and commissioning of Magnifying Mirror of Jaquar Cat NO ACN-1193N with flexiable hose connection, regulator with flexible pipe 1.5 m long, wall hooked complete as required.
20
-
-
Providing and Fixing, testing and commissioning of Sauna- 4 Persons of Jaquar Cat NO ASU-NAW-1102A220 including inside outside control panel, themeteral heater, stove heater, hygometre, themeterometer, laddle and bowl, lumber support, chromotherapy light, ambient light, entertaintment system, glass enclosure, Cedar wood inside and outside and also wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required. .
2
-
-
Providing and Fixing, testing and commissioning of Hot Water Solutions with M.S. 425 litre centralised Geyser- VRN-DUN-425 Verna high capacity 425 litre, with Powder coated body, and Blue lined diamond coating including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required. .
2
-
-
Solar Water Heating System of 500 Litres/ Hr Capacity with Combined Heat Pump TechNOlogy or 2000 LPD Conventional Package solar water heating system based on a closed circuit indirect heat transfer system and capable of producing specified quantity of water at 60 deg C during peak winters. The system shall essentially consist of insulated storage tank, collector panels, insulated interconnecting pipe work, electric booster, supporting structure, electrical back up all complete.
1
-
-
Supllying and Fixing, Testing and Commissioning of 15mm Air release valve, Zoloto-1094 or Equivalent
210
-
-
Providing, fixing, jointing and testing UPVC soil, waste, vent pipework comprising UPVC pipe confometering to IS :4985-1983 and of required class as specified below and fittings (moulded as well as fabricated) like elbows, bends, reducers, threaded tail pieces, caps, suitable elbow with suitable extension piece for drain point and other specials jointing with cement solvent, chasing, cutting and making good the walls & floors, pipes laid in floors shall be encased with 40 mm thick concrete all around, complete in all respects including testing of complete installation.
40 mm dia 6 kg/cm2 (Class III )
5
-
-
50 mm dia 6 kg/cm2 (Class III )
5
-
-
Providing and fixing M.S. puddle flanges fabricated of 750 mm long pipe pieces to R.C.C. water tanks wall / slab. The entire fitting shall be hot dipped galvanised (Flanges shall confimeterto BS10 Table E) . 32 mm dia (Screwed ends MS plate 6 mm thick; 100 mm x 100 mm plus dia of pipe).
22
-
-
50 mm dia (Screwed ends MS plate 6 mm thick; 100 mm x 100 mm plus dia of pipe).
18
-
-
80 mm dia (Flanged ends MS plate 6 mm thick; 100 mm x 100 mm plus dia of pipe).
14
-
-
100 mm dia (Flanged ends MS plate 6 mm thick; 250 mm x 250 mm plus dia of pipe).
14
-
-
Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of NOt less than 2 mm thick CRCA MS sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmetres, ammetres etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as required. (Only face area is to be measured) 9.19.1 Upto 300 mm deep
129
-
-
Supply, installation, testing and commissioning of 4 pole (3 phase + neutral) aluminium bus bars in existing cubicle type compartmentalized wall/ floor mounted panel board along with suitable size and shape insulators, necessary bolts and nuts etc complete as required. 9.20.2 200amp (30x5mm)
806
-
-
300 amp (50x5mm)
354
-
-
500 amp (75x6mm)
372
-
-
Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 11.1.12 3 pole MCCB, 400A, Adjustable TheRmtal - Magnetic Release, 35KA
14
-
-
3 pole MCCB, 100A, Adjustable TheRmtal - Magnetic Release, 25KA
145
-
-
3 pole MCCB, 25-63A, Fixed TheRmtal Release, 10KA
1194
-
-
3 pole MCCB, 160A, Fixed TheRmtal Release, 25KA
20
-
-
3 pole MCCB, 200A, Adjustable TheRmtal - Magnetic Release, 25KA
140
-
-
Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as required.
408
-
-
Providing and fixing penal mounting following rating digital type ammetre of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as required.12.19.4 0-500 amps
119
-
-
Providing and fixing penal mounting 0-500 volt voltmetre of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as required. 12.20.2 diital type
129
-
-
Providing and fixing penal mounting selector switch in existing cubical panel including, connections, testing and commissioning etc. as required. 12.21.1 for voltmetre
129
-
-
For ammetre
129
-
-
Supplying and fixing on surface/ recess following way, 240 volts SP&N MCB distribution board consumer unit of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as required. (But without MCB/RCCB/Isolator) 11.3.2 2+8 way double door
48
-
-
2 + 12 way, Double door
26
-
-
2 + 16 way, Double door
298
-
-
Supplying and fixing on surface/ recess horizontal type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as required. (But without MCB/RCCB/Isolator) 11.4.5 6way double door
66
-
-
4 way double door
28
-
-
8 way double door
444
-
-
Supplying and fixing TP&N MCB, 440 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as required. 11.16.4 50 amps
84
-
-
63 amps
444
-
-
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required 11.18.1 40 amps
474
-
-
63 Amps
714
-
-
Supplying and fixing SP MCB, 240 volts, 'C' series, suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required 11.11.2 6 amps to 32
18208
-
-
Supplying and fixing DP MCB, 240 volts, C series, suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required 11.11.2 63 amps
1200
-
-
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required
1247.3
-
-
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed PVC conduit as required. 3.13.6 3 X 4 sq. mm in 25mm conduit
9700
-
-
3 X 6 sq. mm in 25mm conduit
16600
-
-
3 X 10 sq. mm in 25mm conduit
27000
-
-
Supplying and laying following sizes one number PVC insulated/ XLPE, PVC sheathed, steel aRmtoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with 1 mm thick GI saddle as required. 17.5.3 2x10 sq.mm
1550
-
-
3.5 x 25 sq. mm.
1600
-
-
3.5 x 35 sq. mm.
1950
-
-
4 x 10 sq. mm.
10800
-
-
4 x 16 sq. mm.
20500
-
-
Supplying and laying following sizes one number, steel aRmtoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with M.S flat clamp and steel dash fastener/ G.I. bolts and nuts as required. 17.6.1 3.5 x 50 sq. mm.
4200
-
-
3.5 x 70 sq. mm.
2200
-
-
3.5 x 95 sq. mm.
700
-
-
3.5 x 120 sq. mm.
900
-
-
Supplying and laying following sizes one number, steel aRmtoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with M.S flat clamp and steel dash fastener/ G.I. bolts and nuts as required. 17.6.1 3.5 x 150 sq. mm.
1100
-
-
3.5 x 70 sq. mm.
2800
-
-
3.5 x 95 sq. mm.
4000
-
-
3.5 x 120 sq. mm.
6500
-
-
Supplying and making end teRmtination with brass compression gland and aluminum lugs for following size aRmtoured aluminum conductor power cable of 1.1 KV grade as required 17.23.3 2x10 sq.mm
330
-
-
3½ X 25 sq. mm (25 mm)
76
-
-
3½ X 35 sq. mm
78
-
-
4 X 10 sq. mm
330
-
-
4 X 16 sq. mm
320
-
-
3½ X 50 sq. mm
64
-
-
3½ X 70 sq. mm
48
-
-
3½ X 95 sq. mm (38 mm)
34
-
-
3½ X 120 sq. mm (45 mm)
24
-
-
3½ X 150 sq. mm (45 mm)
24
-
-
3½ X 185 sq. mm (50 mm)
30
-
-
3½ X 240 sq. mm (57 mm)
40
-
-
3½ X 300 sq. mm (63 mm)
68
-
-
Supplying and installing following size powder coated, perforated M.S. cable trays with perforation NOt more than 17.5% rigidly suspended from the ceiling with M.S. suspenders at a distance NOt more than 2.5 metre and near every junction/ joint etc complete as required 20.1.1 100 mm width X 50 mm depth X 1.6 mm thickness
14000
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
8700
-
-
300 mm width X 50 mm depth X 1.6 mm thickness
2200
-
-
Supplying and fixing of following sizes PVC conduit along with accessories in concealed complete as required. 3.15.1 20mm
57600
-
-
25 mm
36200
-
-
32 mm
7900
-
-
40 mm
2100
-
-
50 mm
1400
-
-
Supplying and laying HDPE pipe of 4kg/sqcm in ground below road, path etc at a depth NOt less than 40 cm including excavation, dismantling of road if required and refilling the trench etc. as required 16.2.4 110 mm outer dia
1050
-
-
200 mm outer dia
750
-
-
Supplying and laying following size RCC Hume pipe class NP-2 (in standard length og 2 metre) with collar in ground below road, path etc at a depth NOt less than 50 cm including excavation, dismantling of road if required and refilling the trench etc. as required 16.4.2 150mm dia
2050
-
-
300 mm dia
1400
-
-
Wiring for light/ fan/ exhaust fan / call bell point with 1.5 sqmm FR PVC insulated stranded copper conductor single core cable in concealed PVC conduit, with 5 amp modular switch, modular base and cover plate, suitable size G.I. box and earthing the point with same size cable as required. 3.7.1 short point
14800
-
-
Medium Point
7900
-
-
Long Point
2350
-
-
Wiring for twin control light point with 1.5 sqmm FR PVC insulated stranded copper conductor single core cable in concealed PVC conduit, with 5 amp modular switch, modular base and cover plate, suitable size G.I. box and earthing the point with same size cable as required.
1020
-
-
Extra for providing and fixing light plug point on board in concealed PVC conduit point wiring with modular type 3 pin 5 amp socket outlet and 5 amp switch including cost of base and cover plate and G. I. box etc. as required.
2800
-
-
Wiring for light plug point with 2x2.5 sq mm FR PVC insulated stranded copper conductor cable in concealed PVC conduit along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size cable etc. as required 3.10.1 short point
6470
-
-
Medium Point
2880
-
-
Long Point
1340
-
-
Extra Long Point I
535
-
-
Extra Long Point II
335
-
-
Extra Long Point III
180
-
-
Wiring for power plug point with 2x4 sq mm FR PVC insulated stranded copper conductor cable in concealed PVC conduit along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size cable etc. as required. 3.11.1 short point
2203
-
-
Medium Point
1167
-
-
Long Point
614
-
-
Extra Long Point I
326
-
-
Extra Long Point II
195
-
-
Extra Long Point III
180
-
-
Wiring for power plug point with 2x6 sq mm FR PVC insulated stranded copper conductor cable in concealed PVC conduit along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size cable etc. as required. 3.11.1 short point
300
-
-
Medium Point
300
-
-
Long Point
150
-
-
Extra Long Point I
55
-
-
Extra Long Point II
20
-
-
Extra Long Point III
15
-
-
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed PVC conduit as required. 3.13.1 3 X1.5 sq. mm in 20mm conduit
13000
-
-
3 X 2.5 sq. mm in 20mm conduit
34000
-
-
6 X 2.5 sq. mm in 25mm conduit
5500
-
-
9 X 2.5 sq. mm in 32mm conduit
1700
-
-
12 X 2.5 sq. mm in 32mm conduit
1450
-
-
3 X 4 sq. mm in 25mm conduit
11000
-
-
3 X 6 sq. mm in 25mm conduit
15000
-
-
3 X 10 sq. mm in 25mm conduit
16600
-
-
Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 7.4.3 bell push
976
-
-
Telephone socket outlet
1417
-
-
T.V. antenna socket outlet
1352
-
-
25/32 amp A.C. Starter switch
1335
-
-
Supplying and fixing modular stepped type electronic fan regulator (two module size) moving all rounds on the existing modular plate and switch box including connections but excluding modular plate etc. as required
3184
-
-
Batten/ angle holder
810
-
-
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required
2300
-
-
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts A.C. supply, complete as required. 7.7.2 deluxe
976
-
-
Supplying, fixing and testing of approved make bulk head luminaire consisting of pressure die cast Alu. Housing, lamp holder, prismatic glass cover, rubber gasket and wire guard delux type including fixing on wall as required, with necessary material complete.
1700
-
-
Supplying, installation, testing and commissioning of following surface/ concealed type fluorescent fitting (luminaries) complete with electronic ballast/ copper ballast glow type starter but without fluorescent lamp, on ceiling/ wall surface, earthing the fitting etc. as required. 8.9.2 4 x 40 watt single box
2375
-
-
Supplying, fixing, testing and commissioning of following 230/250 volts fluorescent lamp (tube) in existing lighting luminaries as required. 8.12.1 4' x36/40watt
2375
-
-
Supplying, fixing, testing and commissioning of following LED lamps with inbuilt electronic driver heat sink and all other accessories in existing holder/ luminaries as required and furnishing 2 Yrs Guarantee certificate from manufacturer.8.22.3 7 watt
1920
-
-
9 Watt
5150
-
-
Supplying and fixing of wall/ cabin fan of 400mm sweep including connection etc. as required
220
-
-
Supplying, installation, testing and commissioning of following sizes ceiling fan including wiring the down rods of standard length up to 30 cm with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, earthing etc. complete as required. 8.1.2 1200 mm sweep
3434
-
-
Supplying, installation, testing and commissioning of following sizes heavy duty (continuous running) exhaust fan in existing opening in wall including earthing etc. complete as required 8.6.1 300 mm sweep
1370
-
-
450 mm sweep
210
-
-
Supplying, installation, testing and commissioning of following LED fitting (luminaries) down lighters in round/ square shape complete with electronic driver heat sink capacitor and all other accessories on surface/ in false ceiling etc. as required and furnishing 2 Yrs Guarantee certificate from manufacturer. 8.20.3 12 watt
2200
-
-
15/16 Watt
4050
-
-
Supplying, installation, testing and commissioning of following sleek LED panel down lighters (luminaries) in round/ square shape complete with electronic driver heat sink capacitor and all other accessories on surface/ in false ceiling etc. as required and furnishing 2 Yrs Guarantee certificate from manufacturer. 8.21.2 36 watt size 600x600mm
1020
-
-
Supplying, installation, testing and commissioning of following 230/250 volts LED BOLLARD fitting with electronic driver, heat sink, capacitor and all other accessories on existing foundation/ pole bracket complete as required and furnishing 2 Yrs Guarantee certificate from manufacturer. 8.25 6 watt
1470
-
-
9 watt
1340
-
-
Supplying and fixing following sizes of down rod of 15/20mm dia M.S. pipe of thickness 1.6mm to ceiling fan including painting with matching colour etc. as required .8.2.2 60 cm long
1300
-
-
120 cm long
2334
-
-
Supplying and fixing wall mounted storage type electric geyser, complete with inner copper container, heating element, theRmtostat, indicating lamp including inlet / outlet water pipe connection, electric connection testing and commissioning etc. as required. 27.20.3 15 Ltr. Capacity with 1000 watt heater element 5 star
129
-
-
25 Ltr. Capacity with 1500 watt heater element 5 star
64
-
-
Supplying and fixing of following sizes PVC conduit along with accessories in concealed complete as required. 3.15.1 20mm
23300
-
-
25mm
41700
-
-
32mm
4490
-
-
50 mm
1840
-
-
Supplying and drawing UTP 4 pair Cat 6 LAN cable in existing surface/ concealed steel/ PVC conduit as required.
129188
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 6.4.1 75mmx75mm (1module)
2000
-
-
Supplying and fixing metal box of following sizes (NOminal size) in recess with suitable size pheNOlic laminated sheet cover in front including painting etc as required. 6.1.4 150 mm X 150 mm X 60 mm deep
850
-
-
200 mm X 150 mm X 60 mm deep
270
-
-
Supplying and drawing following co-axial TV cable PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ concealed steel/ PVC conduit as required 5.13.1 RG-6 grade, 0.7 mm solid copper conductor
51250
-
-
Supplying and installing following size powder coated, perforated M.S. cable trays with perforation NOt more than 17.5% rigidly suspended from the ceiling with M.S. suspenders at a distance NOt more than 2.5 metre and near every junction/ joint etc complete as required. 20.1.1 100 mm width X 50 mm depth X 1.6 mm thickness
4900
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
3320
-
-
Supply, installation, testing & commissioning of Networkable Intelligent Addressable Fire AlaRmt Control Panel (EN/UL Approved) having following NO of loop, each loop capable of connecting upto 99 detector and 99 devices, with minimum 200 character LCD display, multiple access levels, event history file in NOn-volatile memory (EEPROM) to store 20000 events, including Loop driver cards, network card, in-built battery backup for 72 hrs in standby mode & 30 min in alaRmt condition mode in metal enclosure and other required accessories 29.1.2 Two loop panel
4
-
-
Supply, installation, testing & commissioning of follwing type Addressable detectors (EN/UL approved) with detector mounting base and other required accessories. 29.6.2 Multi-Sensor combined (Photo + TheRmtal) detectors
450
-
-
Rate of Rise TheRmtal (Heat) detectors
40
-
-
Supply, installation, testing & commissioning of follwing Addressable devices (EN/UL approved) with mounting base and other required accessories. 29.7.1 Break Glass Type Manual Call Points in having Break glass message embedded on the glass.
50
-
-
Pull Station Type Manual Call Points.
28
-
-
Isolator module (Fault / Loop)
26
-
-
Monitor Module
28
-
-
Control Module (for access triping off)
28
-
-
Response indicator
200
-
-
Supply, installation, testing & commissioning of Analogue Addressable BEAM TYPE FIRE detectors suitable for minimum 30m span with detector mounting base & required accessories.
14
-
-
Supply of spare / additional break glasses for break glass type MCP.
28
-
-
Supply, installation, testing & commissioning of Strobe cum Sounder in ABS plastic body having sound adjustible Db level upto 90 dBs and a multi tone facility and light ajustable to 110 candelas complete with mounting base, enclosure & required accessories.
28
-
-
Supply, Installation, Testing and Commissioning of Work station with PC with Printer and with GUI based network software (License FOR 250 devices) capable of graphically representing each facility being monitored with floor plans and icons depicting the actual locations of the various sensors locations or device locations with Required communication Network modules to Run the GUI based Building Integrator.
8
-
-
Supply, installation, testing & commissioning of Networkable Intelligent Analogue Addressable Fire AlaRmt Active Repeater Panel with 40 characters LCD display metal enclosure & required accessories.
6
-
-
Supplying and fixing of following sizes PVC conduit along with accessories in concealed complete as required. 3.15.1 20mm
5500
-
-
25mm
5300
-
-
32mm
1000
-
-
Supplying and fixing of following sizes PVC conduit along with accessories in surface complete as required. 4.15.1 20mm
2300
-
-
25mm
900
-
-
32mm
300
-
-
Providing installation testing and commissioning weather & dust proof IP based FIXED LENS true day/ night Camera (IP 66) with IR LED 20-25m range , 1.3 Mega pixel, 1/3 CCD/CMOS, ICR, 0.1 Lux/F1.2, 2.8 - 12mm / F1.4 Vari-focal Lens, Gigabit Ethernet, PoE, 24VAC/12VDC, UL certified on ceiling/ wall or other desired location with mounting accessories.
440
-
-
Providing installation testing and commissioning IP based BOX PoE Camera (IP 66) with variable focal lens (2.8-9 mm) on ceiling/ wall or other desired location with mounting accessories.
104
-
-
Providing installation testing and commissioning weather & dust proof (IP66) IP based DOME PTZ (Pan Tilt & Zoom) true day& night Camera zoom 18 X optical zoom (5-15mm lens),360 degree tilt, 1.3 mega pixel, 0.1 Lux, IR Range 80m, ±0.1° preSetaccuracy, 0-90 tilt range, with complete accessories, UL certified on ceiling / wall or other desired location with mounting accessories.
96
-
-
Providing installation testing and commissioning of following channel NVR (Network Video Recorder) with specified capacity HDD having space for fixing 4 NOs HDD including all connections as required. 30.7.1 8 channel 1 TB HDD
71
-
-
16 channel, 2 TB HDD
43
-
-
24 channel, 4 TB HDD
28
-
-
Providing installation testing and commissioning following size LCD MONITOR at desired location including all accessories, connections etc as required. 30.8.3 42
86
-
-
Supplying and fixing of following sizes PVC conduit along with accessories in concealed complete as required. 3.15.1 20mm
10200
-
-
25mm
16600
-
-
Supplying and fixing of following sizes PVC conduit along with accessories in surface complete as required. 4.15.1 20mm
4200
-
-
25mm
4720
-
-
Supplying, installation, testing and commissioning following rating single phase, 230 volts OFF-LINE UPS (sine wave) with built-in battery including connection as required. 13.1.3 1.5 KVA
5
-
-
1.0 KVA
14
-
-
Supplying, installation, testing and commissioning following rating SMF (Sealed Maintenance Free) lead acid battery including connection as required. 13.4.2 60 AH
5
-
-
45 AH
14
-
-
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as required.
458
-
-
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including soldering, excavation and refilling the trench etc. as required
1350
-
-
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode at 0.5 metre depth below ground level including excavation and refilling the trench etc. as required
1050
-
-
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
250
-
-
Earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required
3000
-
-
Supplying and laying 25 mm X 6 mm G.I. strip at 0.50 metre below ground as strip earth electrode, including soldering, excavation and refilling the trench etc. as required.
14900
-
-
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode at 0.5 metre depth below ground level including excavation and refilling the trench etc. as required.
5900
-
-
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
6910
-
-
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ concealed conduit/ submain wiring/ cable as required.
41400
-
-
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as required.
54
-
-
Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required.
9600
-
-
Providing maintenance free earthing with following size GI pipe including making bore pit of minimum 150mm dia, providing and laying approved make Earthing Electrode of Pipe-in-Pipe techNOlogy as per IS 3043-1987 made of corrosion free G.I. Pipes having outer pipe of 80mm dia and inner pipe of 50mm dia and filling with specified qty highly conductive compound around pipe and above that with soft soil in bore pit complete and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. as required: 14.20.1 With 3 metre long GI Pipes and 50 kgback filling compound.
220
-
-
Suppy, installation, testing & commissitioning and putting into operation and final testing of MACHINE ROOM LESS TYPE automatic lift complete with ARD and all standard equipments, accessories and control equipments as per manufacturer's design and as per CPWD specification (Part III LIFTS) 1981and fulfilling following requiRmtents on turn key basis. A. Type : Passenger lift
. Load : 8 passenger/ 544 kg C. Speed : 1.5 metre per second D. Contol : ACVVVF E. Operation : Microprosser based simplex collective selective with/without lift attendent
F. Total rise : About 9 mtrs
G. Landings : 4 All on same side H. Floors served : G,1,2,3
I. Signals : Digital car position indicator, car travel direction indicator in car & at all landings
J. Lift shaft size : About 1400 mm width X 1200 mm depth, finished with plaster K. Lift car size : About 1800 mm width X 1760 mm depth L. Car entrance : Clear opening 800 mm wide X 2000 mm high protected with car door
M. Landing entrance: Clear opening 800 mm wide X 2000 mm high protected with landing doorN. Car door : Stainless steel two pannel centre opening flush type O. Landing door : Stainless steel two pannel centre opening flush type P. Door operation: Automatic electric power operated door with infra red protection Q. Car interior : Stainless steel pannel with hair line/ moon rock finish on all sides R. Car floor : Hard wood covered with PVC/ marblex tiles S. Car ceiling & lighting : Fluorscent lighting concealed by suspended false ceiling with plain acrylic diffuser. The frame of suspended false ceiling shall be of powder coated aluminium
T. Car ventilation : Pressure fan with aNOdised aluminium grill U. Emergency lighting in car: Battery operated Emergency lighting in the lift car V. Intercom system : Battery operated Intercom system in lift car, machine room and control room W. Emergency alaRmt : Battery operated alaRmt bell system in lift car & contol room
X. Electric power supply : AC 415 Volts 3 phase 50 Hz teRmtinated in machine room
Y. Fire man switch : Fire man switch at main landing teRmtanal
25.18) Add or deduct for providing all additional parts/ equipments or for enhancing the capacity of parts/ equipments in MACHINE ROOM LESS TYPE automatic lift for 8 persons, speed 1.5 m/sec for every additional floor beyond initial G+3 floors.
Rs. 1950000/-
(-) 93750/-
-----------------
Rs. 1856250/-
5
-
-
Supplying, installation, testing and commissioning of centrifugal type moNO-block electric pump Setfor water supply system having following capacity three phase, 415 volts AC induction motor and pump including suitable channel iron base frame, suitable C.C. foundation and connection of suction and delivery line etc. as required. 26.2.2 3 HP, 420 LPM, 20 m head, suction size 65 mm, delivery size 50 mm
14
-
-
5 HP, 750 LPM, 20 m head, suction size 80 mm, delivery size 65 mm
7
-
-
Supplying, installation, testing and commissioning of submersible pump Setfor water supply system with submersible motor directly coupled to multi-stage submersible pump of specified discharge capacity, head, delivery size in existing bore well including 2 SETs of suitable size holding clamps made out of 50 mm X 6 mm MS flat, connection with suitable submersible cable of standard length etc. as required.26.6.3 2.0 hp single phase
10
-
-
3.0 HP, three phase
8
-
-
5.0 HP, three phase
5
-
-
Supplying and fixing following dia HDPE pipe PE-80 Grade (8kg/sqcm) in single length in the suction/ delivery line of water supply pump etc. as required. 26.6.2 50 mm outer dia
1800
-
-
63 mm outer dia
1650
-
-
Supplying and fixing of following sizes GM gate valve ISI mark in the suction/ delivery line etc. as required. 26.7.4 50 mm dia
18
-
-
40 mm dia.
10
-
-
32 mm dia.
5
-
-
Supplying and fixing of following sizes GM NOn return valve ISI mark in the suction/ delivery line etc. as required. 26.8.4 50 mm dia
18
-
-
40 mm dia.
10
-
-
32 mm dia.
5
-
-
Supply, installation, testing and commissioning of 5-7.5 HP 3 phase submersible motor starter cum control wall/ floor mounted type made out of NOt less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection inter-connection etc. as required. a) Phase indicating lamps with fuses and toggle switches 1 SET b) 5/7.5 HP 3 phase DOL starter with over load and NO volt relay 1 NO c) 32 A C curve TPMCB 1 NO d) Voltmetre 0-500 V with selector switch 1 SET e) Ammetre 0-10 A with CT's and selector switch 1 SET.
4
-
-
Supply, installation, testing and commissioning of 1-3 HP 1 phase submersible motor starter cum control wall/ floor mounted type made out of NOt less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection inter-connection etc. as required. a) Phase indicating lamps with fuses and toggle switches 1 SET b) 1/2/3 HP 1 phase DOL starter with over load and NO volt relay 1 NO c) 25 A C curve DPMCB 1 NO d) Voltmetre 0-250 V 1 SET e) Ammetre 0-10 A 1 SET
8
-
-
Supplying and fixing M.S. clamp 50 cm long made of 50mmx5mm thick M.S. Flat for holding the pipes and submerable pump Setas required.
242
-
-
Supplying and fixing 300 mm dia 2 mm thick M.S. sheet cover with 3 cm edge in two past on tube well bore pipe as required
16
-
-
Supplying, laying and fixing following size submersible cable along with GI/PVC/HDFC pipe line or laid in ground etc as required 26.14.2 3x2.5 sqmm
200
-
-
3x4.0 sqmm
260
-
-
3x6.0 sqmm
210
-
-
Supplying and making water proof joint with heat shrinkable joint kit including copper ferrules for following size of 3 core submersible copper conductor cable of 1.1 KV grade as required. 26.15.1 3x1.5 sqmm
12
-
-
3x2.5 sqmm
16
-
-
3x4.0 sqmm
17
-
-
3x6.0 sqmm
15
-
-
Supplying and laying of approved make stainless steel wire rope of 6 mm dia for support of submersible pump Setcomplete with tying to pump Setand pump holding clamp.
1250
-
-
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate having 4 NOs holes for fixing etc. complete as required.
129
-
-
Making jointing of copper tape (with aNOther copper tape, base of the finial or any other metallic object) by reverting, sweating and soldering/ nut bolting of as required.
496
-
-
Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
2375
-
-
Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
1250
-
-
Providing and fixing testing joint, made of 20 mm X 3 mm thick copper strip, 125 mm long, with 4 NO of tinned brass bolts, nuts, chuck nuts and spring washers etc. complete as required.
650
-
-
Providing and laying copper tape 32 mm X 6 mm from earth electrode directly in ground as required.
1650
-
-
Supplying, installation, testing and commissioning of following capacity diesel Generating Set(alternator directly coupled to diesel engine) compete in all respect broadly comprising of following and as per specification. A. Alternator : Self excited, brush less type, of following capacity, 3 phase, 415 volts 50 Hz, 4 pole, AC alternator complete with all accessories. B. Engine : water cooled diesel engine of suitable BHP for rated alternator at 1500 rpm, turbo charged, direct injection type, 4 stroke, 4/6 cylinder including specified size fuel tank of approved design and shape duly calibrated and painted with one coat of primer and two coats of synthetic enameled paint of approved colour, residential type silencer with exhaust MS pipe (upto 2 metre beyond silenser) duly wrapped with asbestos rope of legging of specified quality and specification. C. AMF Panel : Cubical, compartmentalized, AMF panel board with all suitable size power and control contactors, switches, metres and other accessories, internal wiring, connection, inter-connection etc. for trouble free smooth functioning of DG Setcomplete with battery charger and leads as required. D. Base Plate : Common base plate of required size for mounting of engine alternator Setfabricated from MS channel and vibration damping arrangement with cushy foot mounting i/c painting etc. as required. 24.3.5 160 KVA
2
-
-
500 KVA
4
-
-
Supplying and spreading hard stone aggregate 25mm size in out door switch yards as per direction of Engineer-in-charge.
260
-
-
Providing and erecting floor mounted sand/ water bucket stand for keeping 4 NO of fire bucket, 1500 mm in length and 900 mm in height made out of 30 X 30 X 4 mm angle iron welded with 4 hooks and duly painted with one coat of zinc cromate primer and 2 coat of synthetic enamel paint of post box red colour etc complete.
10
-
-
Supplying G.I. Fire buckets with round bottom having at least 9 lit. capacity duly painted with one coat of zinc cromate primer and 2 coat of synthetic enamel paint of post box red colour and filled with dry sand and kept on provided wall hook or stand etc complete.
10
-
-
Supply and laying SMC chequere plate in size 1m x 1m x 2.5mm (thick) to withstand 22 KV Electrical stress near LT or 11 KV HT panel etc complete.
37
-
-
Supply and erecting following ISI marked Fire extenguishers on wall/ column including erecting bracket etc complete. 24.8.1 Co2 type 2 kg
8
-
-
CO2 type 3 kg
8
-
-
CO2 type 4.5 kg
12
-
-
ABC type 4 kg
12
-
-
ABC type 6 kg
16
-
-
Supplying and erecting chain link mesh fencing for electric sub-station switch yard of 2.5 m approx. height from ground level using angle iron size 50 X 50 X 6 mm erected in C.C. foundation 15 X 15 X 40 cm deep at every 2 metre fitted with flat iron support of size 25 X 6 mm on top, bottom and mid way and chain link mesh 50 x 50 mm aparture and 4 mm dia G.I. hard wire securing and screwing with 2mm dia G.I. wire, G.I. staples, G.I.U-nails or steel pins to the angle iron at every distance of 30 cms, by iron studs complete duly painted with one coats of red oxide and two coats of approved colour paint. (Area of fencing i.e. height x length is to be measured)
295
-
-
Supplying and erecting MS gate of approx. size 3.0 m (W) x 2.0 m (H) in two laps for electric sub-station switch yard fencing frame made of angle iron size 50 X 50 X 6 mm on top bottom and sides fitted with flat iron support of size 25 X 6 mm on mid way horizontaly and square bar of size 8 mm at every 100mm vertically including 3 SETs of heavy duty MS hinges and aldrop complete duly painted with one coats of red oxide and two coats of approved colour paint.
10
-
-
Supplying and laying following sizes one number XLPE, steel aRmtoured, aluminium conductor power cable of 11 KV grade in existing RCC/ HUME/ STONEWARE/ METAL pipe as required. 18.3.8 3x240 sqmm
1386
-
-
3 x 300 sq mm
1390
-
-
Supplying and making INDOOR cable end jointing with heat shrinkable cable jointing kit including lugs and other jointing materials, for following size of 3 core, XLPE aluminum conductor cable of 33 KV grade as required : 18.12.8 240 sqmm
22
-
-
300 sq. mm
19
-
-
Supplying and making OUTDOOR cable end jointing with heat shrinkable cable jointing kit including lugs and other jointing materials, for following size of 3 core, XLPE aluminum conductor cable of 33 KV grade as required : 19.13.8 240 sqmm
14
-
-
300 sq. mm
9
-
-
Supplying, installation, including suspension, testing and commissioning of following capacity bus trunking with aluminium bus bars in 1.6mm thick sheet steel enclosure in convenient sections for use on, 3 phase, 4 wire, 415 volts, 50 Hz, A.C. supply including jointing of sections, flexible joints, expansion joints, bends and earthing with 2 runs of galvanised iron strips, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required. 10.3.1 800 amps
200
-
-
1000 amps
150
-
-
1250 amps
80
-
-
1600 amps
80
-
-
2500 amps
60
-
-
Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of NOt less than 2 mm thick CRCA MS sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmetres, ammetres etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as required. (Only face area is to be measured) 9.19.4. 750 mm deep
320
-
-
900 mm deep
170
-
-
1200 mm deep
80
-
-
Supply, installation, testing and commissioning of 4 pole (3 phase + neutral) aluminium bus bars in existing cubicle type compartmentalized wall/ floor mounted panel board along with suitable size and shape insulators, necessary bolts and nuts etc complete as required. 9.20.7 800 amps (100x6mm)
1130
-
-
1000 amp (100x10mm)
240
-
-
1200 amp (125x10mm)
200
-
-
1600 amp (2X100x6mm)
140
-
-
2000 amp (2X125x10mm)
80
-
-
Providing and fixing approved make, Electrically Operated, draw out type, 415/500 volts, 4 pole air circuit breaker complete with all standard accessories as per manufacturers specifications including drilling holes on the board, connections, earthing the body, testing and commissioning etc. as required. 12.2.1. 800 amps 4 pole 50ka
24
-
-
1250 amps, 4 pole, 50 KA
22
-
-
1600 amps, 4 pole, 50 KA
16
-
-
2000 amps, 4 pole, 50 KA
12
-
-
Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.11.1.4. 3 pole MCCB, 100A, Adjustable TheRmtal - Magnetic Release, 25KA
550
-
-
3 pole MCCB, 160A, Adjustable TheRmtal - Magnetic Release, 25KA
266
-
-
3 pole MCCB, 200A, Adjustable TheRmtal - Magnetic Release, 25KA
238
-
-
3 pole MCCB, 250A, Adjustable Microprocessor Release, 35KA
200
-
-
4 pole MCCB, 400A, Adjustable Microprocessor Release, 50KA
87
-
-
4 pole MCCB, 630A, Adjustable Microprocessor Release, 50KA
22
-
-
3 pole MCCB, 800A, Adjustable Microprocessor Release, 50KA
24
-
-
Providing and fixing metal clad, TP&N 4 pole automatic change over switch unit, 415/500 volts, including drilling holes on the board, connections, earthing the body, testing and commissioning etc. as required. 12.9.5 630 amps
16
-
-
800 amps
16
-
-
1000 amps
10
-
-
Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as required.
370
-
-
Providing and fixing penal mounting following rating digital type ammetre of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as required. 12.19.3 0-200 amps
175
-
-
0-500 amps
175
-
-
0-1000 amps
22
-
-
Providing and fixing 4 pole, 415/500 volts following rating (AC-1 Duty) power contactor in existing starter/ cubical panel including, connections, testing and commissioning etc. as required. 12.14.4 100 amps
40
-
-
200 amps
70
-
-
315 amps
18
-
-
400 amps
18
-
-
Providing and fixing following rating current transfoRmter in existing cubical panel including, connections, testing and commissioning etc. as required. 12.15.5 400/5 amps
155
-
-
500/5 amps
103
-
-
800/5 amps
17
-
-
1000/5 amps
11
-
-
Providing and fixing penal mounting following rating digital type ammetre of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as required. 12.19.3 0-200 amps
175
-
-
0-500 amps
140
-
-
0-1000 amps
16
-
-
Providing and fixing penal mounting 0-500 volt voltmetre of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as required. 12.20.2 Digital type
20
-
-
Providing and fixing penal mounting selector switch in existing cubical panel including, connections, testing and commissioning etc. as required. 12.21.2 for voltmete
20
-
-
For ammetre
20
-
-
Providing and fixing following Time switch (timer) in existing panel including connection, testing and commissioning as required. 12.22.1 Digital
16
-
-
Supplying and laying following sizes one number PVC insulated/ XLPE, PVC sheathed, steel aRmtoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as required. 17.3.11 3.5x25 sqmm
6700
-
-
3.5 x 35 sq. mm.
4750
-
-
3.5 x 50 sq. mm.
8000
-
-
3.5 x 70 sq. mm.
7200
-
-
3.5 x 95 sq. mm.
2300
-
-
3.5 x 120 sq. mm.
1800
-
-
3.5 x 150 sq. mm.
2050
-
-
Supplying and laying following sizes one number PVC insulated, PVC sheathed, unaRmtoured, copper conductor controle cable of 1.1 KV grade on surface/ existing cable tray with 1 mm thick GI saddle as required. 17.15.1 2x1.5 sqmm
12500
-
-
4 x 1.5 sq. mm
10300
-
-
6 x 1.5 sq. mm
1850
-
-
Supplying and making end teRmtination with brass compression gland and aluminum lugs for following size aRmtoured aluminum conductor power cable of 1.1 KV grade as required.17.23.12 3½ X 25 sq. mm (25 mm)
572
-
-
3½ X 35 sq. mm (28 mm)
560
-
-
3½ X 50 sq. mm (32 mm)
360
-
-
3½ X 70 sq. mm (35 mm)
248
-
-
3½ X 95 sq. mm (38 mm)
230
-
-
3½ X 120 sq. mm (45 mm)
130
-
-
3½ X 150 sq. mm (45 mm)
194
-
-
Supply of hot dipped galvanized (in single dip to average 70 micron) octoganal pole made of 3mm thick steel plate having base plate 210x210x12mm, window and flush cover with locking arrangement at suitable height from base for cable teRmtination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, including template and anchor plate 240x240x3mm with 4 NOs 16mm dia 450mm long foundation bolts bolts (EN8 grade).21.6.1 3 metre high, minimum dia 130mm at bottom and 60mm at top
220
-
-
4 metre high, minimum dia 130mm at bottom and 60mm at top
180
-
-
5 metre high, minimum dia 130mm at bottom and 60mm at top
100
-
-
6 metre high, minimum dia 130mm at bottom and 60mm at top
1305
-
-
Supply of hot dipped galvanized (in single dip to average 70 micron) octoganal pole made of 3mm thick steel plate having base plate 240x240x16mm, window and flush cover with locking arrangement at suitable height from base for cable teRmtination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, including template and anchor plate 240x240x3mm with 4 NOs 20mm dia 700mm long foundation bolts (EN8 grade).21.7.3 9 metre high, minimum dia 155mm at bottom and 70mm at top
80
-
-
Supply of hot dipped galvanized (in single dip to average 70 micron) octoganal pole made of 3mm thick steel plate having base plate 310x310x16mm, window and flush cover with locking arrangement at suitable height from base for cable teRmtination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, including template and anchor plate 270x270x3mm with 4 NOs 20mm dia 750mm long foundation bolts (EN8 grade). 21.8.3 12 metre high, minimum dia 200mm at bottom and 100mm at top
641
-
-
Supply and fixing following street light pole bracket on existing pole made out of 50 mm dia MS "B" class pipe welded to 300 mm long MS pole caNOpy of suitable dia at a angle of 102.50 including having MS triangular stiffner of size 150 X 50 X 5 mm thick, making arrangement for tightening the bracket with pole by providing suitable size heavy duty nuts and bolts in caNOpy, painting with one coat of approved steel primer etc. as required. 21.9.1 Single Over Hang 0.75 metre Long
60
-
-
Single Over Hang 1.00 metre Long
90
-
-
Single Over Hang 1.50 metre Long
1085
-
-
Double Over Hang 0.75 metre Long
60
-
-
Double Over Hang 1.00 metre Long
140
-
-
Double Over Hang 1.50 metre Long
1282
-
-
Erection of GI octogonal/ tubular pole on existing cement concrete foundation having grouted bolts and nuts, aligning in true vertical position as required. 21.11.1 3 mtr high
220
-
-
4 metre high
140
-
-
5 metre high
80
-
-
6 metre high
965
-
-
9 metre high
180
-
-
12 metre high
841
-
-
Designing and providing suitable RCC foundation in Cement Concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm NOminal size) for 3 mere to 12 metre high GI octagonal pole including steel reinforcement (minimum 90kgper cum), foRmt work, embeding 2 NOs 50mm dia PVC pipe for cable entry in each foundation, excavation disposal of surplus soil and curing etc. as required.
2347
-
-
Providing and making suitable CC pole collar (muffing) in Cement Concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm NOminal size) of size 0.4 m dia and 0.4 m height from existing CC foundation.
2347
-
-
Supplying and fixing water tight teRmtinal box made of 1.6mm thick M.S. sheet with detachable gland plate in bottom, hinged front open able cover, rubber gasket, having 1 NOs 4way connector and 1 NO SPMCB inside the box for cable connection, fixed to pole with 2 NOs clamp made from 40x3mm M.S. flat with 2 NO nut bolt dully painted with 2 coat of red oxide paint and 2 coat aluminium paint complete as required. 21.16.2 30x20x15 cms
2347
-
-
Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 5 KV surge protection on pole bracket complete as required and furnishing 2 Yrs Guarantee certificate from manufacturer. 8.30.2 40-45 watt
1365
-
-
90 watt
1282
-
-
120 watt
360
-
-
135 watt
260
-
-
Supplying, installation, testing and commissioning of following 230/250 volts LED BOLLARD fitting with electronic driver, heat sink, capacitor and all other accessories on existing foundation/ pole bracket complete as required and furnishing 2 Yrs Guarantee certificate from manufacturer. 8.25.1 6 watt
3769
-
-
9 watt
4965
-
-
HT Panel Single Input/Output 33KV, 630A, 26.40KV for 3 second, indoor type incomer VCB 33 KV metreing Cubicle for 33/0.4 KV Transfromer 25/5A, 10VA, Class of accuracy 0.2s, 33000/V3/110/V3, VA 50, Class 0.2 (Make-Hupen/CSPDCL Approved Vender)
2
-
-
CAPACITOR PANEL (480 KVAR) Supplying, installation, testing and commissioning of free standing, front operated cubical type capacitor control panel with aluminium bus bars of current density 0.8Amps/sq.mm. & rupturing capacity(50KA), LED indicating lamps interconnections with under NOted switch gears as per technical specifications and drawings complete as required. All MCCB shall have rotary operating handles. (capacitor control panel) 1 NO800A ,TPN ,MCCB with electronic releases 800 Amps. TP&N aluminium bus bars (50 KA) 12 NO 100 Amps. TPN MCCB(50 KA) with theRmto magnetic releases. 12 NO 40 KVAR TP Shunt capacitor with discharge register and 7% D-tuned HaRmtonic reactor filter
2
-
-
CAPACITOR PANEL (300 KVAR) Supplying, installation, testing and commissioning of free standing, front operated cubical type capacitor control panel with aluminium bus bars of current density 0.8Amps/sq.mm. & rupturing capacity(50KA), LED indicating lamps interconnections with under NOted switch gears as per technical specifications and drawings complete as required. All MCCB shall have rotary operating handles. (capacitor control panel) 1 NO400A ,TPN ,MCCB with electronic releases 400 Amps. TP&N aluminium bus bars (50 KA) 12 NO 63 Amps. TPN MCCB(50 KA) with theRmto magnetic releases. 12 NO 25 KVAR TP Shunt capacitor with discharge register and 7% D-tuned HaRmtonic reactor filter
2
-
-
CAPACITOR PANEL (200 KVAR) Supplying, installation, testing and commissioning of free standing, front operated cubical type capacitor control panel with aluminium bus bars of current density 0.8Amps/sq.mm. & rupturing capacity(50KA), LED indicating lamps interconnections with under NOted switch gears as per technical specifications and drawings complete as required. All MCCB shall have rotary operating handles. (capacitor control panel) 1 NO400A ,TPN ,MCCB with electronic releases 400 Amps. TP&N aluminium bus bars (50 KA) 8 NO 63 Amps. TPN MCCB(50 KA) with theRmto magnetic releases. 8NO 25 KVAR TP Shunt capacitor with discharge register and 7% D-tuned HaRmtonic reactor filter
2
-
-
Supply, Installation, Testing & Commissioning of compact sub-station including of11 kv SF6 insulated compact switchgear with VCB as protection to transfoRmter and L.T. Switchgear. The unitised/compact sub station shall be outdoor type,floor mounted with facility for internal lighting,earthing,padlocks etc. The connection of HT switchgear to transfoRmter shall be with the help of 3C X 95 sqmm of aluminium XLPE cables and from TransfoRmter to LT switchgear with the help of suitable size of copper bus bars. Further details are as 1. HT side extensible SF6 insulated compact switch gear of 12 KV 630 A RmtU with 02 NO LBS and 01 NO VCB for transfoRmter protection having fault rating of 21 KA for 3 Sec. including fault passage indicator on both LBS.
2. 11/.433 Kv 500 KVA Oil Type TransfoRmter having doubled wound copper winding with A Class insulation with Energy Efficiency Level-2.
3. LT Side having 01 NO 800 amp 04 Pole ACB with breaking capacity 50 KA with O/C, E/F protection and 04 NO 400 amp capacity 04 pole 50 KA breaking capacity adjustable microprocessor release MCCB 415 V, 50 Hz, (ICS=ICU) for outgoing. 4. RmtU, TransfoRmter Chamber and LT Chamber shall be IAC tested for 21 KA for 1 Sec. The equipment shall be SCADA compatible having communication port and having provision of DT metreing within it, completeness
18
-
-
Supplying, fixing, testing, and commissioning of following LED box decorative fitting with inbuilt electronic driver heat sink and all other accessories 1 X 20 watts LED box decorating fitting
2275
-
-
Supply, installation, testing & Commsioning of Modulating outdoor Heat Pump (Cooling/ heating) units based on inverter technology as per specifications with invertor scroll compressors with special pre-coated fins, panel, corrosion resistant coated condenser, inverter / digital based condenser fan, M.S. hot dip galvanised stands / supports, electrical & microprocessor panel, isolating valves, vibration isolators and all the necessary accessories for proper functioning of the units, having following actual cooling (HP) capacities. Eco friendly refrigerent(R-410) shall be used with the VRF/VRV system. The unit capacities shall be considerd after taking deration into account due to copper piping lengths as per site conditions and as per outside design conditions. 8 HP
14
-
-
10 HP
14
-
-
14 HP
3
-
-
22 HP
30
-
-
28 HP
6
-
-
30 HP
1
-
-
32 HP
14
-
-
34 HP
3
-
-
36 HP
2
-
-
40 HP
4
-
-
Supply, Installatuion, testing and commissioning of VRF based indoor units complete with cordess remote, Drain pump and all accessories, Vibration isolators & supports of following minimum cooling capacities CasSETte Type - 4.0 TR
25
-
-
CasSETte Type - 3.3 TR
49
-
-
CasSETte Type - 3.0 TR
173
-
-
CasSETte Type - 2.3 TR
41
-
-
CasSETte Type - 2.0 TR
225
-
-
CasSETte Type - 1.65TR
170
-
-
CasSETte Type - 1.3 TR
61
-
-
CasSETte Type - 1.0 TR
129
-
-
CasSETte Type - 0.8 TR
14
-
-
High wall Type - 2.0 TR
12
-
-
High wall Type - 1.5 TR
4
-
-
Supply, installation and testing of Accessories as under Decorative Panel for CasSETte AC
887
-
-
Cordless Remote.
903
-
-
Y Branch for IDUs
912
-
-
Y Branch for ODUs
90
-
-
Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each Setof indoor & outdoor units as per specifications, all piping inside the building shall be properly supported. 41.3 mm OD ( insulation 19mm)
785
-
-
34.9 mm OD ( insulation 19mm)
1425
-
-
28.58 mm OD ( insulation 19mm)
1425
-
-
22.2 mm OD ( insulation 19mm)
1425
-
-
19.4 mm OD ( insulation 19mm)
1385
-
-
15.88 mm OD ( insulation 13mm)
1425
-
-
12.7 mm OD ( insulation 13mm)
1415
-
-
9.52 mm OD ( insulation 13mm)
1415
-
-
6.35 mm OD ( insulation 13mm)
2800
-
-
Additional Refrigerant Top Up & Lifting/Shifting of Units
16
-
-
Covered GI cable tray with 16 Gauge GI Sheet cover for exposed piping (on terrace)
785
-
-
Rigid UPVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation. 32 mm dia
5850
-
-
25 mm dia
800
-
-
Providing & fixing control cum transmission wiring of 2 core x 1.5 sqmm copper in suitable conduits between indoor and out door unit.
11400
-
-
Supply, Installation, Testing and Commissioning of Stands for ODUs
90
-
-
ups 10 kva on line
11
-
-
ups 20 kva
10
-
-
ups 30 kva
8
-
-
solar water heating system
20
-
-
Supply and laying of 2 x 1.5 mm² MICC mineral insulated copper cable complete with all accessories required e.g. shaddles, thimbles etc. directly clamped either on surface or recess or above false ceiling or concealed in wall etc. for control cabling of Fire detection and alaRmt devices and interconnecting them with panels etc.
9000
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements