Nava Raipur Atal Nagar Vikas Pradhikaran Tender

Highback chair for Deputy Commissioner, Assistant Commissioner
Providing supplying and Installation of Higback chair . Chair seat made up of 1.5 ±0.1cm. thick hot-pressed plywood or plastic and upholstered with fabric upholstery covers and moulded Polyurethane foam. back is made up of injection moulded frame, inner frame upholstered with mesh fabric and mounted on the main assembly, back adjustable lumbar support for achieving comfortable seating posture, the chair should have valid certificate of Indoor advantage gold Overall chair size: minimum W 63cm , D 63cm , H101.5cm-111cm , minimum seat size 44.5cm depth, 46.4cm width, minimum back size 51cm cm width., effective back height from Seat - 55 (approx), polyurethane foam for seat having minimum density 45±2 kg/m3 , Armrest top is mounted on Armrest structure made of glass filled Nylon/injection mouled. Armrest Top is PU moulded over glass filled Nylon insert., armrest height adjustable up to minimum 4.5 cm in min. 3 steps 360 degree revolving type,centre tilt synchro mechanism, tilt adjustment for back in 3 position locking with antishock feature, pneumatic height adjustment of 8.5cm(minimum). The pedestal shall be made of nylon base. It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 660 mm pitch-centre-dia (700-720mm with castors). The twin wheel castors shall be made of Nylon injection moulded in black color. The Headrest sub-assembly is made up of injection moulded glass filled Polypropylene

Backunit for Deputy Commissioner, Assistant Commissioner
Providing , suplying and placing of STORAGE UNIT. with overall dimensions : 1050 Wx450Dx695H
wooden Body : Body is made from 18mm PLB with all the edges sealed with 0.8 mm
thick PVC Edgeband. The Back panel is 9mm White PLT. The entire construction
is ready to assemble unit and is assembled with suitable KD fittings.
The shelves and separator panels ( if available ) is made from 18 mm white PLT
and edges are sealed with 0.8 mm edge band. The bottom shelf is fixed and
other shelves have one step adjustment for optimizing the space.
Doors : Door Panels are made from 18 mm PLB with 2 mm Edge band on all
edges ad a flush Plastic handle is fitted vertically at the center of the door. The
hinge door has suitable hinges and HDU is fitted with an adjustable fitting for
height adjustment. The SDU runs in a PVC track mounted on the TOP and
Bottom panel of the Body.
All the storages are fitted with a 6 mm leveler at bottom for leveling.

Corner Table for Secretary room
Providing, supplying of corner table Dimensions W x H x D (cm) - 150 x 40 x 80
Finish Color - Remini Walnut
Primary Material - Engineered Wood
Primary Material Subtype - Prelaminated Particle Board
Net Weight (kg) - 43

Midback chair for Clerical Staff, PA & Staff, PA & Staff for Joint comm, PA & Staff to Secretary Sir, PA to Comm Sir, PA to Spl Comm Sir, Consultant office & Programer Section
Providing, supplying and placing of Mid Back Chair.The seat is made up of 1.5 ± 0.1 cm thick hot - pressed plywood upholstered with fabric and moulded polyurethane foam.seat size 50.00CM (W) X 48.70CM(D). Tolerance +/-3cm
The Back is injection moulded in Glass filled Polypropylene which is upholstered with Mesh fabric.The back consist of adjustable lumbar support made of injection moulded Polypropylene having a nominal thickness of 0.3 ±0.02 cm.
back size 47.00 cm(W) x 57.60 cm(H). Tolerance +/- 3cm The polyurethane foam for seat is of density= 48 ± 3kg/m.
ARMRESTS (FIXED): The armrest is made of injection moulded Polypropylene which is connecting seat and back .
MECHANISM : The mechanism is designed with the following features: 360° revolving type. Centre - Tilt.*Tilt with upright lock.
The pneumatic height adjustment has a stroke of 10 ± 0.5cm. The pedestal is injection moulded Polyamide and fitted with 5 nos.twin wheel castors. The pedestal is 66.1 ±0.5 cm P.C.D.The twin wheel castors are injection moulded in black Polyamide having 6.0± 0.1 cm wheel Diameter. Overall dimensions: HEIGHT (H) - 88.5-98.5 CMSEAT HEIGHT (SH) - 41.0-51.0 CM

Coffee Table for rest room of commissioner and special commissioner
Dimensions W x H x D (cm)-120 x 45 x 60
Material : 18 mm thk prelaminated particle board
Shade : Remini Walnut
Construction : Knock down
Finish :
1) MIP lamination in Remini Walnut shade with
matching lipping in Matt finish
2) MIP lamination in Remini Black ink shade with
matching lipping in Matt finish

Compactor Storage for Record Room
Providing, supplying and placing of compactor Overall Dimensions for single body 1200mm(W)x400mm(D)x2082mm(H)- Total no of Single Body-2, TwinBody-1 The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS : 513.Each body shall have a main unit plus add on units (1,2,3,4,5). Final finish consists of epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of minimum 40 microns.Shelf construction made of 0.7 thk CRCA steel conforming to IS: 513 Gr.D or DD.Uniformly distributed load capacity of 100 Kg . Undercarriage shall have construction in welded frame CRCA sheet 2 mmthk conforming to IS:513. Movement of units achieved by pushing or pulling 'C' tyep plastic handle (mounted on each double & single movable units) & rigidly fixed at suitable height on body side. y. Each movable body also has an understructure with 4 nos. of antifriction ball bearings for rolling on channels. The twin moving body, i.e. TM, has 4 nos. of bearing fitted horizontally to restrict the lateral movement of the body on rail while the single moving body, i.e. SL, body has 2 nos. of a special anti-tilt bearing assembly fitted to the understructure which not only restricts lateral movement but also prevents SL from toppling. A Centralized locking arrangement is provided through Locking Stiffener mounted onto back of Single Last unit, i.e. SL body. It gets locked into the channels when all the units are brought together, and the lock is turned. The Recess handle lock is of Godrej make & placed at a height of 940mm from ground level. The locking stiffener is made of 1.2 mm thk conforming to IS:513.Hinged doors have Recessed Die cast Handle cum lock with 3 way locking through a lever & shooting bolts.The nuts & bolts are galvanized / blackodized / Zn Plated. Label Holder: It is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover of body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the aluminium extrusion. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a transparent plastic of corresponding length of 150-200 micron polythene is to be inserted.

Coffee Table for Commissioner room
Providing, supplying of coffee table with Dimensions W x H x D (cm) - 120.1 x 41.1 x 59.4
Finish Color - Wenge
Primary Material - Tempered Glass
Number of Shelves - 4

Net Weight (kg) - 31
Style - Contemporary & Modern
Delivery Condition - Knock Down

3 Seater Sofa for Special Commissioner Room
Providing, supplying and placing of three seater sofa. SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette.
BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette.
UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose.
LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.
Width (W): 206.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM.

Sofa for secretary rest room
Providing and placing of sofa Overall Size :Width : 87.5cm Depth : 78cm Height : 81.5cm Seating Height : 38cm
Upholstery:Material : PVC .Shade : Black ,Thickness : 1 mm ,Weight (GSM) : 575 ,Tear strength (kg/5cm) : wrap : 34.1 weft : 19.78 ,Breaking strength (Kg/cm2): wrap : 3.92 Kg weft : 2.59 Kg ,Adhesion of coating kgf/5cm : warp : 3.05 Kg weft : 3.02 Kg , Colour Fastness to Rubbing (Dry/Wet) (scale 1-5) : Dry = 3 Wet = 3 Frame :Material : Pine Wood , Moisture content : 10 -12 % ,Thickness of Plywood used : 12 mm & 18 mmSeat Foam :Material : Slab stock ,Density : 32 kg/m3 at seat and 28 kg/m3 at backWebbing : Material : Nylon Thickness : 2 mmLegs Material : PVC with 4 mm bush

Backunit for Joint Commissioner
Providing, Supplying and placing in position Back unit of the following specifications.1800x500x1100 Top Panel-Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.
Slide Door Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves.
Shutters are made of 25mm thick MDF one side pre-laminate board confirming to
IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening.Storage is provided with lock for security

Book racks for Library
Providing, supplying and installation of racks Overall Size WxHxD - Single Body 1200W : 1200 x 2078** x 300
25mm WILL BE ADDED ON BOTH SIDE FOR WOODEN FRONT
Body - a. Side panels, Frame & Cross L bracket are made using 0.8 mm CRCA (IS:513).
The assembly consists of 2 tie rods, 4 fixing brackets and 2 turnbuckles. The tie rods are fixed in a shape of ‘X’
The tie rods are made of 4mm diameter rods of MS while fixing brackets are made of 2mm thick. CRCA IS:513 Grade.
Optional wooden panel of 25mm thk PLT, E1-P2 grade board for PLT
ref. Specification - FF04/DSN/STD/101, edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue
Under Structure - Under structure is made of 0.8m CRCA (IS:513).
b. Sizes of under structure for single body :
1. 1200W x 295D x 80H
2. 2400W X 295D X 80H
Shelves - a. Shelves used are 10 bend panel made of 0.8mm CRCA (IS:513).
b. Shelf panels are placed on shelf support and then fixed using nut and bolts from below.
c. Standard config. consists of 6 loading levels formed by 5 no of adjusted shelf for each main and add on unit.
d. Uniformly Distributed Load Capacity per each shelf is 80 Kg maximum.
Construction- Completely Knock down construction
Finish- All MS sheetmetal and metal frame components are powder coated with epoxy polyester powder to the min thickness of min 45 microns.
Stackability- The add-on units can be stacked width wise to form a bank of racks having common side panel up to 4800W
Shelves back stiffener - At the rear side of the shelves back stiffeners are provided. These act as separators made of 0.8mm THK CRCA (IS:513).
Label Holder -It is an aluminum extrusion of length 296mm for single body bookrack , fitted on to front of body. The Paper is 300GSM matt finish, to be inserted into the aluminum extrusion. The length of paper is 296mm for single body bookrack.
Optional Accessory - Rollout shelf: Rollout shelf accessory is a pull-out tray which has 2 nos. ‘C shaped brackets of 1.2mm thk. Firmly mounted on shelf support with adjustable height. Slides are then fixed on these C brackets and rollout shelf assembly is mounted on the slides. This shelf opens outwards up to 250mm & has load capacity of 40 KG UDL.
b) Book Separator: Book separator is made of 2mm thk. CRCA sheet (IS:513) and is used to as a partition and support for books placed vertically on a shelf.

Sofa for Secretary room
Overall Size :Width : 181m Depth : 78cm Height : 81.5cm Seating Height : 38cmUpholstery:Material : PVC .Shade : Black ,Thickness : 1 mm ,Weight (GSM) : 575 ,Tear strength (kg/5cm) : wrap : 34.1 weft : 19.78 ,Breaking strength (Kg/cm2): wrap : 3.92 Kg weft : 2.59 Kg ,Adhesion of coating kgf/5cm : warp : 3.05 Kg weft : 3.02 Kg , Colour Fastness to Rubbing (Dry/Wet) (scale 1-5) : Dry = 3 Wet = 3 Frame :Material : Pine Wood , Moisture content : 10 -12 % ,Thickness of Plywood used : 12 mm & 18 mmSeat Foam :Material : Slab stock ,Density : 32 kg/m3 at seat and 28 kg/m3 at backWebbing : Material : Nylon Thickness : 2 mmLegs Material : PVC with 4 mm bush

Sofa for ADF Finance
Porviding, supplying and instllaiton of sofa Dimensions W x H x D (cm) -190 x 61.50 x 76
Finish Color- Dark Brown
Seat Height (cm)- 41.5
Secondary Material- Pinewood
Primary Material- Solid Wood
Delivery Condition- Knock Down
Upholstery Material- Fabric

Visitor chair for Additional Commissioner, ADF Finance Room, Joint Commissioner
Providing, supplying and installation of visitor Chair. Seat should be made up of 1.2 ±0.3cm. thick hot-pressed plywood or plastic , upholstered with fabric upholstery covers and moulded Polyurethane foam., back made up of injection moulded frame, inner frame upholstered with mesh fabric and mounted on the main assembly, minimum seat size 47cm width , 45cm depth, back size 48 cm width, 55.0 cm height, polyurethane foam for seat moulded with density minimum 45±3 kg/m3, The armrest support is made of injection molded in Glass filled Polypropylene which is fixed to tubular frame. tubular frame should be cantilever type made of MS ERW round tube having outer dia 24mm (approx.) and thickness 2mm(approx) including powder coating of 40-60 microns, base shoes on fixed on frame etc.all complete as per manufacturers specification.

Sofa for rest room of Additional Commissioner and Joint Commissioner
Providing, supplying and installation of sofa- Overall Size :Width : 171cm Depth : 82cm Height :85cm Seating Height : 44cm
Upholstery Material : Synthetic leather/PVC
Thickness : 1 mmWeight (GSM) : 575
Frame :•Material : Pine WoodMoisture content : 10 12 %
Foam :Material : Slab stockDensity : Seat 32 kg/m3 and 28 kg/m3 with recron filler Back 28 kg/m3
Webbing :Material : Nylon
•Thickness : 2 mmLegs :Material : PVC with 70 mm bush

1 seater sofa for Secretary room
Providing, supplying and installation of Dimensions W x H x D (cm)- 885 x 860 x 790
Style- Contemporary & Modern
Storage Included- No
Net Weight (kg)- 41
Seat Height (cm)- 43
Primary Material- Solid Wood
Delivery Condition- Knock Down
Upholstery Material- Fabric
angular backrest • Sturdy understructure made of pinewood with plywood cross-section. • fabric upholstery

Premium highback chair for Commissioner
Providing, supplying and installation of the premium chair The Cushioned seat inner is made of injection moulded glass filled poly-amide.Upholstered seat sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m³, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. seat size 48.5cm. (D) x 55.4cm. (W). Tolerance +/3 cm The Cushioned back is made of PU Foam with Polypropylene Injection molded Plastic Inner. back size 53.5 cm. (W) x 78.8cm. D tolerance +/3 cm The armrest having four range of adjustment
· Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other adjustment are provided in adjustable arm top sub assembly. Up-Down adjustment has 8 position (10.5±0.5cm range)
· Arm top swivel adjustment- 2 position, 12°±2° swivel inside
· Arm top width adjustment - Any position (2.0±0.5cm range each arm top)
· Arm top To - Fro Adjustment- any position (4.0±0.5cm range)
· Armrest top is made up of high density PU molded over glass filled Poly-amide inner.
The adjustable tilting mechanism is designed with the following features:360° revolving type.Forward tilt of sesat and back.
· Upright tilt lock. Tilt tension adjustment can be operated in seating position.3-position Tilt limiter.
: Seat depth adjustment is housed below the seat and integrated with the mechanism with help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0±0.5 cm.
: Back Assembly is connected to buff polish die cast aluminum Spine with an Up-Down mechanism assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5±0.5 cm.
: The heavy duty class 4 pneumatic height adjustment has an adjustment stroke of 13.0±0.3 cm.
: The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. 5 Nos. twin wheel soft castors are injection moulded in Poly-amide with PU lining, having 6.5±0.1cm wheel Diameter and assembled to pedestal. , Overall Dimensions :WIDTH (W): 74.0 CM. DEPTH (D): 74.0 CM.Height: 96.0 - 116.0 CM. SEAT HEIGHT (SH): 44.5 - 58.0 CM.

Storages for Record Room
Providing, supplying and installation of storages of overall width Height: 1950mm, Width: 900mm, Depth: 450 mm
Construction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing Hinge
Handle - Asthetically appealing handle made of Aluminum
Cam Lock - 3 Way locking provision.Click action mechanism.
- Key removable in locked and unlocked positions.
- Zinc alloy die cast housing.Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 55kg UDL for 900W unit The product should be preferabbly IAQ Gold certified.
4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels
900 w = 10 no of filesFinish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron).

Corner Table for commissioner room
Providing, supplying and installation of corner table Net Weight (kg) - 9.4
Sales Package - 1 Corner Table
Primary Material - Tempered Glass
Finish Color - Black
Style - Contemporary & Modern

Maximum Load Capacity (kg) - 20
Wheels Included - No
Delivery Condition - Knock Down
• Fibreglass reinforced plastic is used to make the base material, giving it a luxurious smooth finish. • Tempered glass top .

Corner Table for Special Commissioner
Providing, supplying of corner table with overall Dimensions W x H x D (cm)
45 x 45 x 45
Material : 18 mm thk prelaminated particle board
Shade : Remini Walnut
Construction : Knock down
Finish :
1) MIP lamination in Remini Walnut shade with
matching lipping in Matt finish
2) MIP lamination in Cloud Grey shade with
matching lipping in Matt finish

Midback chair for visitors of Special Commissioner
Providing, supplying and placing of Mid Back Chair. SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette.Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK SIZE: 47.7 cm. (W) x 60.1 cm. (D)
The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps.ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features:360' revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated.Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. : Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need.
The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter.
Overall Dimensions of Chair Seat Height -43.1-53.1cmHeight -96.5-114.0.cm.

Highback chair for cubicle for consultant, Inspector and Officers work force, Officers Grade Cubicle
Providing, supplying and placing of High Back Chair.The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric.
The Back is injection moulded in glass filled Polypropylene which is upholstered with Mesh fabric.
The back consist of adjustable lumbar support made of injection moulded Polypropylene having an adjustment
of 3.0 ±0.1 cm. Back Size : 45.5 cm. (W) x 54.0 cm. (H) Seat Size : 48.5 cm. (W) x 49.0 cm. (D). Tolerance +/3 cm
The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m³, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The

Café table PU Coated for canteen
Providing and Placing in position Canteen table of the following specifications. 4 Seater PU Coated size shall be 1135 Width mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking .

Cabin Table for Deputy Commissioner
Providing, Supplying and installation of cabin table with overall Woktop Dimensions Main Table: 1800 W x 750 D, ERU SIde Table: 900W x 600D, Height:750mm. The legs are fabricated by Argo Shield & available for work top level 750 mm from base. Wire Management Single Power box with raiser for Manager Modules, Single tables (8+3 Anchor Roma). Soft closing access flap with brush. Metal modesty: Metal modesty is made from 0.8 mm thick CRCA. Metal modesty are mounted on the worktop with the help of the modesty mounting brackets made of 3 mm thick HRWorktop: 25mm thk prelaminated partical board with pvc lipping Providing and fixing pedestal unit with size of 646 ht X 390 w X 435 d- 3DR BOX + BOX + FILE . Pedestal will be welded assembled with 0.8 mm CRA Body and shell, 1.2 mm CRCA for Top and bottom stiffener and Dr front in 0.6 mm. All Dr with double extension precision ball slides , Dr suitable for storing full case in depth wise manner and A4 files in width wise manner. Cam lock and central RH locking with actuator lever & locking channel mechanism for Box Box File. Castor swiveling non lockable mounted below the body shell. Pedestal finish epoxy polyester powder coated to the thickness of micron ( +/-10)

Fullback chair for Conference room of Commissioner, Command Center and secretary sir
Providing, supplying and placing of full back Chair SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair.back size 51.5 cm. (W) x 85 cm. (H). Seat size E 56.5 cm. (W) x 54.0 cm. (D). Tolerance +/3cm The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. The adjustable armrest is designed with the following feature Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)Armrest top is mounted on Armrest structure made of glass filled Nylon.· Armrest Top is PU moulded over glass filled Nylon insert.CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type.3 position locking with anti shock mechanism.Tilt tension adjustment The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm . The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors). The twin wheel castors are injection moulded in Black Nylon. Overall DimensionsHEIGHT (H): 113.5-123.5 CM. SEAT HEIGHT (SH): 46.0-56.0 CM.

Chair for Canteen Area, Library
Providing, supplying and placing of Cafe Chair.The single piece seat back shell is made up of injection moulded high impact strength glass filled polypropylene polymer compound The powder coated (DFT 50±10 microns) welded tubular frame is made from ∅ 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm M.S. E.R.W tube. The 0.16 ± 0.008 cm thk CRCA sheet is welded to tubes for fixing shell to the frame. The shoe is made of high impact strength polypropylene polymer compound and are fitted at the end of the tubular frame. Minimum Seat Size 44cm (W) x 48cm (D), Back Size 44cm (W) x 38 (H), Seat Height: 45cm Overall Height: 81cm ± 2cm.

Workstation for Inspector and Officers work force
* PROVIDING AND PLACING 52.4MM THICK 1200 MM HIGH PANELS IN SYSTEM. WITH COMBINATION OF METAL RACEWAY AT BOTTOM, TWO INTERMEDIATE FABRIC BLOCKS, TOP TILE - FABRIC TACKABLE, WHITE BOARD, FABRIC MAGNETIC. PROVIDING POWDER COATED LEGS. PENTAGONAL WORKSURFACE - 1500 W1 X 1500 W2 X 600 D - PROVIDING 25 MM THICK PRELAMINATED PENTAGONAL WORKTOP WITH PVC LIPPING made of 3 mm thick HR . Providing and fixing pedestal unit with size of 646 ht X 390 w X 435 d- 3DR BOX + BOX + FILE . Pedestal will be welded assembled with 0.8 mm CRA Body and shell, 1.2 mm CRCA for Top and bottom stiffener and Dr front in 0.6 mm. All Dr with double extension precision ball slides , Drawer suitable for storing full case visa files in depth wise manner and A4 files in width wise manner. Cam lock and central RH locking with actuator lever & locking channel mechanism for Box Box File. Castor swiveling non lockable mounted below the body shell. Pedestal finish epoxy polyester powder coated to the thickness of micron ( +/-10)

Backunit for special commissioner
Supplying and placing in position Back unit of the following specifications.Overall Dimension 2350x500x1800 Top Panel:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Slide Door Unit:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves.Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.
Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening.
Storage is provided with lock for security.
Display/Storage Unit:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side,back and shelves.
Doors are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.
Top panel of display unit Made of 25mm thick MDF one side pre-laminate board confirmin to IS-14587:1998 with 0.4mm PVC membrane pressed on to top

Visitor Chair for Conference room, cubicle for consulatants
Providing ,suplying and placing of aiota certified visitore chair.the seat is upholstered with fabric and moulded polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric. seat size: 47.0cm. (W) x 48.0 cm. (D) Tolerance +/- 3cm * back size : 50.0 cm. (W) x 42.0cm. (H). Tolerance +/-3cm
2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. TUBULAR FRAME : The powder coated (DFT 40-60 micron) tubular frame is cantilever type & made of Ø2.5±0.03 cm x 0.2±0.016 cm thk MS ERW tube.

Executive Table for Speical Commissioner
Providing, Supplying and placing in position Main Table,ERU & pedestal of the following specifications. Overall Dimension 2350x2350x750 Primary Work Surface:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.
Secondary Work Surface:Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.
Softclosing access flap with in-build power box are provided on work surface for wire management.
Modesty Panel:Made of 25mm thick MDF one side laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to topUnder- structure:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.
Integrated Pedestal:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM.
Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening.
Pedestal is provided with lock for security.

Chair for guard room
Providing and placing Mid Back chairs for Chair seat made up of 1.2 ± 0.3 cm thick hot - pressed plywood. upholstered with fabric and moulded polyurethane foam., Back is injection moulded in Glass filled Polypropylene which is upholstered with Mesh fabric.The back consist of adjustable lumbar support made of injection moulded Polypropylene having a nominal thickness back adjustable lumbar support for achieving comfortable seating posture, minimum Seat size 45cm depth, 44 cm width, minimum back size 46cm width minimum effective back height from Seat - 55 cm, polyurethane foam for seat having minimum density 45±3 kg/m3, armrest top injection moulded in polyurethane and mounted on the. The armrest is made of injection moulded Polypropylene which is connecting seat and back, 360 degree revolving type, tilt with upright lock The pedestal shall be injection moulded and fitted with 5 nos. twin wheel castors. The size of the pedestal shall be 660-670mm The twin wheel castors shall be made of Nylon injection moulded in black color.

Corner Table for rest room of Additional Commissioner and Joint Commissioner
Providing, supplying and instalaltion of The corner table has a simple and minimal silhouette, making it adaptable to different kinds of décor. It is portable and can be quickly and easily moved around based on the requirement in flexible room arrangements. With a wood finish having visible wood grain combined with contrasting tapered legs, this table adds an element of charm to your living space.Colour & Material -ENGINEERED WOOD, Dimensions W x H x D (cm)- 44.5 x 45.6 x 44.5, Delivery Condition- Knock Down, Style - Contemporary & Modern

Executive Table for Secretary
Providing, Supplying and placing in position Main Table,ERU & pedestal of the following specifications. 2350x2350x750 Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management
Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.
Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.
Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.
Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade
confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.
Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to
IS-14587:1998 with 0.4mm PVC membrane pressed on to top
Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal
Panel Drawer Slides. Drawer extension is 325 MM.
Drawers have a soft closing & anti slam mechanism.
Handles are provided for ease of opening.
Pedestals are provided with lock for security.

Sofa for Additional Commissioner
Providing, supplying and installation of sofa with Dimensions W x H x D (cm)- 175 x 83.5 x 80
Finish Color - Crush Brown
Seat Height (cm) - 46.5
Upholstery Material - Synthetic Leather
Primary Material - Leatherette
mid-back backrest . • Rounded armrests with soft foam seating provide ergonomic comfort. • synthetic leather or fabric

Sofa for Additional Commissioner
Providing, supplying and installation of sofaDimensions W x H x D (cm)- 81 x 83.5 x 80 .
Finish Color - Crush Brown
Seat Height (cm) - 46.5
Upholstery Material - Fabric
Primary Material -Pinewood
mid-back backrest . • Rounded armrests with soft foam seating provide ergonomic comfort. • synthetic leather or fabric

Executive table for Additional Commissioner and ADF Finance
Providing, Supplying and placing in position Main Table,ERU & pedestal of the following specifications. Overall Dimension 2100x2250x750 Primary Work Surface:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.
Secondary Work Surface:Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Soft closing access flap with in-build power box are provided on work surface for wire management. Modesty Panel:Made of 25mm thick MDF one side laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to topUnder- structure:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening.
Pedestal is provided with lock for security.

Visitor chair for Assistant Commissioner, Deputy Commissioner, Officers Grade Cubicle
Providing ,suplying and placing pf visitore chair.the seat is upholstered with fabric and moulded polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric. seat size: 47.0cm. (W) x 48.0 cm. (D) Tolerance +/- 3cm * back size : 50.0 cm. (W) x 42.0cm. (H). Tolerance +/-3cm2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. ARMs(FIXED): The arm is made of injection molded in Glass filled Polypropylene which is connection to seat & back together. Caps are provided to hide Armrest tubular frame joinery. TUBULAR FRAME : The powder coated (DFT 40-60 micron) tubular frame is cantilever type & made of Ø2.5±0.03 cm x 0.2±0.016 cm thk MS ERW tube.The Shoe is made of injectionmolded in Glass filled Polypropylene, fixed on the tubular frame from bottom side.ARMREST SUPPORT : The armrest support is made of injection molded in Glass filled Polypropylene which is fixed to tubular frame. Overall Dimensions HEIGHT (H) 93.30 CM SEAT HEIGHT (SH)45.50 CM

Highback chair for PA's of Commisioner, Secretary, Additional Commissioner, Special Commissioner, Joint Commissioner
Providing and placingHighback chairs for Chair seat made up of 1.2 ± 0.3 cm thick hot - pressed plywood. upholstered with fabric and moulded polyurethane foam., Back is injection moulded in Glass filled Polypropylene which is upholstered with Mesh fabric.The back consist of adjustable lumbar support made of injection moulded Polypropylene having a nominal thickness back adjustable lumbar support for achieving comfortable seating posture, minimum Seat size 45cm depth, 44 cm width, minimum back size 46cm width minimum effective back height from Seat - 55 cm, polyurethane foam for seat having minimum density 45±3 kg/m3, armrest top injection moulded in polyurethane and mounted on the. The armrest is made of injection moulded Polypropylene which is connecting seat and back, 360 degree revolving type, tilt with upright lock. The pedestal shall be injection moulded and fitted with 5 nos. twin wheel castors. The size of the pedestal shall be 660-670mm The twin wheel castors shall be made of Nylon injection moulded in black color.

Table for Guard Room
Supplying and placing in position office table of the following specifications.Its size shall be 1199 Width x 590 Depth x 735 Height . The top panels shall be made from 18 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall be dia. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mm thick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic.

Table with pedestal for Staff's of Commisioner, Secretary, Additional Commissioner, Special Commissioner, Joint Commissioner
Providing and supplying of table with worktop dimensions: Width: 1200mm, Depth: 600mm, Height: 750mm Worktop: 25mm thk prelaminated partical board with pvc lipping . Wire Tray with integrated power box & switch plate (8+3 Anchor Roma). Soft closing access flap with brush. . Metal modesty: Metal modesty is made from 0.8 mm thick CRCA. Metal modesty are mounted on the worktop with the help of the modesty mounting brackets made of 3 mm thick Providing and fixing pedestal unit with size of 646 ht X 390 w X 435 d- 3DR BOX + BOX + FILE . Pedestal will be welded assembled with 0.8 mm CRA Body and shell, 1.2 mm CRCA for Top and bottom stiffener and Dr front in 0.6 mm. All Drawer with double extension precision ball slides , Drawer suitable for storing full case Godrej Ezee & visa files in depth wise manner and A4 files in width wise manner. Cam lock and central RH locking with actuator lever & locking channel mechanism for Box Box File. Castor swiveling non lockable mounted below the body shell. Pedestal finish epoxy polyester powder coated to the thickness of micron ( +/-10)

Backunit for near cubicles
Providing , suplying and placing of STORAGE UNIT. with overall dimensions : 1050 Wx450Dx1219H
wooden Body : Body is made from 18mm PLB with all the edges sealed with 0.8 mm
thick PVC Edgeband. The Back panel is 9mm White PLT. The entire construction
is ready to assemble unit and is assembled with suitable KD fittings.
The shelves and separator panels ( if available ) is made from 18 mm white PLT
and edges are sealed with 0.8 mm edge band. The bottom shelf is fixed and
other shelves have one step adjustment for optimizing the space.
Doors : Door Panels are made from 18 mm PLB with 2 mm Edge band on all
edges ad a flush Plastic handle is fitted vertically at the center of the door. The
hinge door has suitable hinges and HDU is fitted with an adjustable fitting for
height adjustment. The SDU runs in a PVC track mounted on the TOP and
Bottom panel of the Body.
All the storages are fitted with a 6 mm leveler at bottom for leveling.

Tables for conference room
Providing, Supplying and placing in position table for conference area of the following specifications. 1350W X 600D X 750H
Worktop-Made of 25mm Thick Pre-laminated board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap prefreffably can be provided on work surface for wire management. Metal modesty would be preferabbly should be made from 0.8 mm thick CRCA. Metal modesty are mounted on the worktop with the help of the modesty mounting brackets made of 3 mm thick Provision for standard size of 8 module electrical (Anchor Roma) should offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles.Power Box-Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma).

Cabin Table for Cubicles for Consultants, Officers Grade Cubicle
Providing, Supplying and installation of cabin table with overall Woktop Dimensions Main Table: 15000 W x 600 D, ERU SIde Table: 900W x 450D, Height:750mm. The legs are fabricated by Argo Shield & available for work top level 750 mm from base. Wire Management Single Power box with raiser Single tables (8+3 Anchor Roma). Soft closing access flap with brush. Metal modesty: Metal modesty is made from 0.8 mm thick CRCA. Metal modesty are mounted on the worktop with the help of the modesty mounting brackets made of 3 mm thick HRWorktop: 25mm thk prelaminated partical board with pvc lipping Providing and fixing pedestal unit with size of 646 ht X 390 w X 435 d- 3DR BOX + BOX + FILE . Pedestal will be welded assembled with 0.8 mm CRA Body and shell, 1.2 mm CRCA for Top and bottom stiffener and Dr front in 0.6 mm. All Drawer with double extension precision ball slides , Drawer suitable for storing full case visa files in depth wise manner and A4 files in width wise manner. Cam lock and central RH locking with actuator lever & locking channel mechanism for Box Box File. Castor swiveling non lockable mounted below the body shell. Pedestal finish epoxy polyester powder coated to the thickness of micron ( +/-10)

Corner Table for room of Additional Commissioner and Joint Commissioner
Providing, supplying and installation of corner table with Dimensions W x H x D (cm) -45 x 46.9 x 45 A compact corner table in a combination of glass and wood in two stylish contrasting finishes. The two shelves can be used for storing and displaying decorative items and knick-knacks. The corner table can be placed against the wall or independently, making it flexible to different kinds of room layouts.Colour & Material- ENGINEERED WOOD
Delivery Condition- Knock Down, Finish Color -Sonoma Oak , Primary Material- Engineered Wood , Sales Package- 1 Coffee Table

Coffee Table for rest room of Secretary
Providing, supplying and installation oftable L x W x H – 1100 x 600 x 450
Table-top – 18 mm thick PLT Board in Remini Walnut
PLT – 18 mm thick in Remini Walnut & Royal Ivory
Configuration – Shelf storage

Highback chair for Special Commissioner
Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette SIZE : 50.0 cm. (W) x 50.0 cm. (D) BACK SIZE: 50.7 cm. (W) x 79.4 cm tolerance +/-3cm
The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps.
ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features:
• 360' revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated.
SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm.
ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need.
PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm.
PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.)
TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter.
Overall Dimensions of Chair
Seat Height -43.1-53.1cmHeight -112.7-130.2cm.
Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm

Backunit for Additional Commissioner and ADF Finance
providing, Supplying and placing in position Back unit of the following specifications.Overall Dimension 1800x500x1100 Top Panel:Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to topSlide Door Unit:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shad confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves.
Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening.
Storage is provided with lock for security.

Sofa for Discussion room
Providing, supplying and installation of Dimensions W x H x D (cm)- 81 x 83.5 x 80 .
Finish Color - Crush Brown
Seat Height (cm) - 46.5
Upholstery Material - Fabric
Primary Material -Pinewood
mid-back backrest . • Rounded armrests with soft foam seating provide ergonomic comfort. • synthetic leather or fabric.

Sofa for Joint Commissioner
Providing, supplying and installation of SofaDimensions W x H x D (cm)- 81 x 83.5 x 80 .
Finish Color - Crush Brown
Seat Height (cm) - 46.5
Upholstery Material - Fabric
Primary Material -Pinewood
mid-back backrest . • Rounded armrests with soft foam seating provide ergonomic comfort. • synthetic leather or fabric

Highback Chairs for Conference Hall
Providing, supplying and placing of High Back Chair. The seat is made up of 12mm thick MR Grade plywood, layered with pocket spring coms, super soft foam of 32 kg/m3 density and edging foam of 28 kg/m3 dormity. A 200GSM soft touch fibre fill sheet is placed over foam sub-assembly and upholstered in natural leather or leatherette.
The back assembly is made up of a combination of pinewood members, 12mm thick MR Grade
plywood and 2mm thick cardboard, layered with slab stock foam of 28 kg/m3 density. A 200GSM soft touch fibre fill sheet is placed over foam sub-assembly and upholstered in natural leather or leatherette
The amped assembly is made up of 6mm thick MR Grade plywood fixed with MS powder-coated
brackets, Iayered with foam of 60 kg/m3 density, A 200GSM soft touch fibre fill sheet is placed over foam sub-assembly and upholstered in natural leather or leatherette.: The mechanism centre tilt synchro is designed with the following features:
360 revolving type3 position lockingTill tension adjustment
The Class 4 pneumatic height adjustment has stroke of 100.3 cm
: The pedestal is made of high-pressure die-cast polished aluminum with a buffed outside surface and black color-coated internal surface, it is fitted with 5 castors and has a pitch-center diameter of 67.510.5 cm (77.5 10 cm with castors).
The twin wheel castors are injection moulded in Black polyamide. Overall Dimensions WIDTH (W) - 69.0cmDEPTH (D) - 77.8cmHEIGHT (H) - 123.5-133.5cmS EAT HEIGHT (SH) - 49.5-59.5 cm.

Cabin Table for Assistant Commissioner
Providing, Supplying and installation of cabin table with overall Woktop Dimensions Main Table: 1650 W x 750 D, ERU SIde Table: 900W x 450D, Height:750mm. The legs are fabricated by Argo Shield & available for work top level 750 mm from base. Wire Management Single Power box with raiser for Manager Modules, Single tables (8+3 Anchor Roma). Soft closing access flap with brush. Metal modesty: Metal modesty is made from 0.8 mm thick CRCA. Metal modesty are mounted on the worktop with the help of the modesty mounting brackets made of 3 mm thick HRWorktop: 25mm thk prelaminated partical board with pvc lipping Providing and fixing pedestal unit with size of 646 ht X 390 w X 435 d- 3DR BOX + BOX + FILE . Pedestal will be welded assembled with 0.8 mm CRA Body and shell, 1.2 mm CRCA for Top and bottom stiffener and Drawer front in 0.6 mm. All Dr with double extension precision ball slides , Drawer suitable for storing full case Godrej Ezee & visa files in depth wise manner and A4 files in width wise manner. Cam lock and central RH locking with actuator lever & locking channel mechanism for Box Box File. Castor swiveling non lockable mounted below the body shell. Pedestal finish epoxy polyester powder coated to the thickness of micron ( +/-10)

Recliner sofa 3 Str for rest room of Commissioner and Special Commissioner
Providing, suplying and placing of recliner .Overall size- H X W X D =1000 MM X 2130 mm X 850MM Upholstery
• Material : Half Leather ( Genuine Leather at touch points) and Syn
Leather (PVC) at non touch points. Leather Type : Pigmented
• Thickness : 1 mm Frame : Material : Combination of plywood and pine Wood Plywood thickness : 12 mm (moisture resistance and termite free) Pinewood cross section ( without knots) Moisture content : 10 -12 %
Foam Seat : Material : Slab stock foam Density : Base 28 kg/m3
Back : Material : Slab stock foam of density 28 kg/cubic m is pasted on back.
• The front of the backrest is made of loose conjugated polyester fibre which is
weighed & filled in the upholstery to make the required cushion
Armrest : Soft conjugated polyester fiber is filled in upholstery cushions
Webbing S springMechanism
• RMT manual mechanism. It is made up of mild steel linkages which are riveted
together. The reclining mechanism is tested for 158 kg load.
Legs : PVC bushes fitted at the bottom surface of reclining mechanism

Coffee Table for ADF Finance Room
Providing, supplying and instllation of table L x W x H – 1200 x 540 x 463
Table-top – 18 mm thick HDMR board in Gordion
PLT – 18 mm thick in Palau Teak
Configuration – Shelf Storage

Highback chair for Additional Commissioner
Providing, supplying and instalaltion fo Highback chairThe seat shall be made up of 1.5+/-0.3cm thick hot pressed plywood or plastic & upholstered with fabric and moulded medium density foam. The back is made up of injection moulded frame, inner frame upholstered with mesh fabric and mounted on the main assembly, back adjustable lumbar support for achieving comfortable seating posture, Overall chair size: Minimum W 63cm , D 63cm , H101.5cm-111cm, minimum seat size 44.5cm depth, 46.4cm width,back size 47cm width., effective back height from Seat - 55cm minimum, polyurethane foam for seat having density 45±2 kg/m3 (minimum), Armrest top is mounted on Armrest structure made of glass filled Nylon/injection mouled. Armrest Top is PU/injection moulded over glass filled Nylon insert., armrest height adjustable up to minimum 4.5 cm in minimum 3 steps 360 degree revolving type, active bio synchro mechanism, tilt adjustment for back in minimum 5 position locking with antishock feature, pneumatic height adjustment of 8.5cm.HEADREST: The Headrest sub-assembly is made up of injection moulded glass filled Polypropylene which is upholstered with moulded HR polyurethane foam and fabric. It has an adjustment of 3.0 ± 0.1cm. The pedestal shall be made of nylon base. It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 660 mm pitch-centre-dia (700-720mm with castors). The twin wheel castors shall be made of Nylon injection moulded in black color.

Conference Table for room of Commissioner and Command Center
Providing, supplying and installation of Conference table with Overall Worktop dimensions: 1500 Wx 1200 D x 750 H. Legs are fabricated by Argo Shield Wire Management Single Power box (8M+3M & 8M+3M Anchor Roma)with raiser and Soft closing dual access flap with brush. Worktop: 25mm thk prelaminated partical board with pvc lipping. Metal modesty is made from 0.8 mm thick CRCA. Metal modesty are mounted on the worktop with the help of the modesty mounting brackets made of 3 mm thick HRWorktop

Highback chair for Secretary sir
Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair.The chair seat & back size are
BACK SIZE 51.5 cm. (W) x 82.0 cm. (H)SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)
HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. The 3-way adjustable armrest is is made of die-castaluminium with buffing finish designed with the following features :
· Up-Down adjustment–7 steps (7.0 ± 0.5cm range)
· It has to & fro movement along with Swivel adjustment.
CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type.3 position locking with anti shock mechanism.Tilt tension adjustment
The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm.
: The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia.(77.0 ± 1.0cm with castors).TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 77.0 CM.DEPTH (D): 77.0 CM.HEIGHT (H): 110.5-120.5 CM.SEAT HEIGHT (SH): 44.5-54.5 CM.

Premium 3 Seater sofa for Commissioner Room
Providing, supplying and installation of 3 str sofa-Dimensions W x H x D (cm) - 208.5 x 90 x 82 Upholstery Material- Fabric + Syn LeatherSeatback: · Understructure: Understructure is made up of plywood & pinewood members. Plywood is 12±1mm thk. understructure is made by gluing, nailing & stapling. contact between the metal springs and the seat foam. This prevents seat foam from tearing. Complete purpose. Non woven fabric is stapled on the seat structure frame above the spring assembly to avoid direct 3.8mm is mounted on the seat structure using plastic spring mounting clip for support & additional cushioning 22x40mm, 22x75mm & 16X35mm without having major knots & defects on the surface. Zigzag spring of dia. [moisture resistance & termite proof as per IS:303]. Pinewood are of cross sections 22x64mm, 34x64mm · Foam: Seat is made of PU foam with density 28 kg/m3 of 75mm thickness with a two top layers of supersoft kg/m3 of thickness 6mm. Backrest top is glued with foam of density 28kg/m3 and 25mm thickness. 28kg/m3 and 10mm thickness and sides and the entire backrest are glued with the PU foam with density 60 PU foam with density 32 kg/m3 of 25mm thickness each. Seat front is glued with PU foam with density · Upholstery: Seat upholstery is made in polyester fabric and Black non-woven cloth with zipper for inserting non-woven of 30GSM with partitions. This laminated fabric is used on the upper backrest only. sandwitched laminated foam of density 32kg/m3 of 10mm thickness between a layer of fabric and white the loose seat foam. Backrest upholstery is made up of a combination of Polyester Fabric and Leatherite with.
3. Legs: Polypropylene legs with M8 stud in Black matt finish. 3 Seater with Corner Unit are assembled together with M8 bolts, nuts & .
Packet: Each packet contains one assembled sofa with the respective armrest without leg s and a separate hardware packet containing 4 nos. of plastic legs along with M8 bolts, nuts & washers. hardware packet containing 4 nos. plastic legs along with M8 bolts, nuts & washers

Coffee Table for room of Additional Commissioner, Joint Commissioner, Discussion room, waiting room
Providing, supplying and placing of A compact coffee table in a combination of glass and wood in two stylish contrasting finishes.The two shelves can be used for storing and displaying decorative items and knick-knacks. The corner table can be placed against the wall or independantly, making it flexible to different kinds of room layouts.Colour & Material- ENGINEERED WOOD Dimensions W x H x D (cm) -45 x 47.1 x 90. Delivery Condition- Knock Down
Finish Color -Sonoma Oak , Primary Material- Engineered Wood , Sales Package- 1 Coffee Table
Style- Contemporary & Modern

Coffee Table for rest room of Additional Commissioner and Joint Commissioner
Providing, supplying and placing of coffee table has a minimal and clean aesthetic with simple shapes and lines that can blend easily in a variety of settings. The wood finish adds a touch of sophistication and the tapered legs provide a playful contrast.
The timeless look, sturdy shape and durable materials make it a long lasting addition to any home.
Colour & Material -ENGINEERED WOOD, Dimensions W x H x D (cm)- 44.5 x 45.6 x 111, Delivery Condition- Knock Down

Discussion forLibrary, open area
Supplying and placing in position of table with worktop 900W x 900Dx750Horktop is made of 25mm MDF OSR with pu matt finish on top side. Hardness on top surface is 2H.The under-structure consists of an InnerTube Assembly with Top Plate, for Worktop Mounting, & an Outer Tube Assembly with Round/Rectangle/Square Bottom Plate. The Inner & Outer Tube Assemblies are telescopically connected. The Top Plate is made of 5mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) & the bottom plate is made of 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062). The Inner Tube Assembly is made of 082.5 x 2thk ROUND ELECTRIC RESISTANCE WELDED Tubes (ERW)(As per IS:7138) and 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) welded together using TUNGSTEN INERT GAS Welding. The Outer Tube Assembly is made
of 089 x 2.5 thk and ROUND ELECTRIC RESISTANCE WELDED Tubes (ERW)(As per IS:7138) and 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) welded together using TUNGSTEN INERT GAS Welding. The whole structure is EPDXY POLYESTER Powder Coated (DFT 40-60 microns). The product has a knock-down construction. It is assembled using alloy steel hardware (blackened & coated with rust preventive oil).ube of diameter 90 and 2 mm thickness .

Corner table for ADF Finance
Providing ,suplying and placing of coffe table. Overall size- L x W x H – 1200 x 595 x 423
Table-top – 18 mm thick PLT board in Silver Oak PLT – 18 mm thick in Silver Oak & Pebble Stone
Configuration – Shelf storage + Display Space + Dual drawer concealed storage

Table for PA's of Commisioner, Secretary, Additional Commissioner, Special Commissioner, Joint Commissioner
Providing, supplying and installation of Table with Overall size- 1500W X 600D X 750H Main Worktop-Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management.
Return Worktop-Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty Panel-Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. legs should be fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded togesther by argo shield welding. This welded structure is coated with 50
micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm.Cross Members-Cross Members should be made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating.Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table.
Access Flap-Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) should be offered.Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles.Power Box-Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at
Pedestal should be there with table Door Storage Box+Files also with drawer and opening provision hinge provision for more storage with Drawer-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Door is fixed with slide on hinges and handle is provided for ease of opening. Drawer is provided with ebco metabox slide and lock for security.

Workstation for Clerical Staff, Consultant office & Programer Section
Providing and supplying workstaiton with worktop dimensions: Width: 1200mm, Depth: 600mm, Height: 750mm Worktop: 25mm thk prelaminated partical board with pvc lipping . Wire Tray with integrated power box & switch plate (8+3 Anchor Roma). Soft closing access flap with brush. Metal modesty: Metal modesty is made from 0.8 mm thick CRCA. Metal modesty are mounted on the worktop with the help of the modesty mounting brackets made of 3 mm thick PARTIAL Screen: Aluminum Extrusions frame partial screen with 26mm thk in 450mm ht. above worktop for back to back and 800mm on Aisle side. Providing and fixing pedestal unit with size of 646 ht X 390 w X 435 d- 3DR BOX + BOX + FILE . Pedestal will be welded assembled with 0.8 mm CRA Body and shell, 1.2 mm CRCA for Top and bottom stiffener and Dr front in 0.6 mm. All Drawers with double extension precision ball slides , Drawer suitable for storing full case visa files in depth wise manner and A4 files in width wise manner. Cam lock and central RH locking with actuator lever & locking channel mechanism for Box Box File. Castor swiveling non lockable mounted below the body shell. Pedestal finish epoxy polyester powder coated to the thickness of micron ( +/-10)

Café table PU Coated for canteen
Providing and Placing in position Canteen table of the following specifications. 4 Seater PU Coated size shall be 1734 Width mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking .

Backunit for secretary
Providing, Supplying and placing in position Back unit of the following specifications.2350x500x1800 Top Panel:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Slide Door Unit:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves. Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Shutters have a soft closing & anti slam mechanism.Handles are provided for ease of opening.Storage is provided with lock for security.Display/Storage Unit:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade
confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side,back and shelves.Doors are made of 25mm thick MDF one side pre-laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to top.Top panel of display unit Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top

Coffee Table for Rest room of Commissioner
Providing, suppplying of coffee table with Dimensions W x H x D (cm)-120 x 45 x 60
Material : 18 mm thk prelaminated particle board
Shade : Remini Walnut
Construction : Knock down
Finish :
1) MIP lamination in Remini Walnut shade with
matching lipping in Matt finish
2) MIP lamination in Remini Black ink shade with
matching lipping in Matt finish

Coffee Table for Special Commissioner Sir
Providing, supplying of corner tabble Dimensions W x H x D (cm)
45 x 45 x 45
Material : 18 mm thk prelaminated particle board
Shade : Remini WalnutConstruction : Knock down
Finish :1) MIP lamination in Remini Walnut shade with
matching lipping in Matt finish
2) MIP lamination in Cloud Grey shade with
matching lipping in Matt finish

Premium Executive Table for Commissioner
Providing ,Supplying and placing in position Main Table of the following specifications.3000 x 1050 x 740 MAIN WORKTOP :Made of 43mm Thick (±1) combination of MDF and particle board with top veneer facecoated with clear lacquer. All edges are edge banded with matching 1mm thick veneerlipping.ERU TOP PANEL: Made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping. Top panel is provided with elliptical cable cover which contains 2 USBs, 1 Universal socket, 1misc. cable grommet, 1 HDMI connector and 1 CAT-6 connector. RU HEIGHT ADJUSTABLE LEG: The Leg consist of Outer and Inner Aluminum Extrusions (AL 63400 - WP). The Worksurface moves up & down due to the extension and compression of smooth functioninggas lift with adjustable height and consistent motion during operation. The gas lift isactuated using lever mechanism, operated manually.WORKTOP SUPPORT FRAME: The Worktop Support Frame consist of two 25.4x25.4x1.2mm thk ERWTube (As per IS:7138) and Top support plate made of 2mm thk CRCA steel (As per IS: 513), weldedtogether. The gas lift is actuated using lever made of Dia 8 mm MS ROD (IS: 432) from either sides of the worktop.
LEATHER PAD:Made of 18mm Thick (±1) MDF with Leatherette wrapped around top surface. Thisleather pad is fixed to main top panel.DRAWER UNIT:Top panel and drawer unit modesty panel is made of 43mm Thick (±1) combination ofMDF and particle board with top veneer face coated with clear lacquer. All thicknessedges are edge banded with matching lipping.
Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade andapproved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thickPVC lipping. Bottom panel of drawer is 9mm thick particle board with leatherette on topsurface.
Drawer unit is provided with soft closing channels for smooth opening and closing.Drawer unit is secured with side central lock.
OPEN STORAGE UNIT:Top panel and open storage unit modesty panel is made of 43mm Thick (±1)
combination of MDF and particle board with top veneer face coated with clear lacquer. Allthickness edges are edge banded with matching lipping.Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade andapproved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thickPVC lipping.
MODESTY:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approvedshade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVClipping. Modesty is fitted with aluminum trims.
UNDERSTRUCTURE:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approvedshade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVClipping. Door is fixed with soft closing hinges and handle is provided for ease of opening.Also lock is provided on side panel for security.
ACCESS FLAP WITH POWER BOX:Soft closing access flap with power box contains 3 Universal Sockets, 2 USB powerpoints, 1 HDMI connection, 1 inbuilt misc. cable grommet and CAT 3 and CAT 6connections.

Sofa for Deputy Commissioner, Assistant Commissioner
Providing supplying of Sofa Overall Size :Width : 181m Depth : 78cm Height : 81.5cm Seating Height : 38cmUpholstery:Material : PVC .Shade : Black ,Thickness : 1 mm ,Weight (GSM) : 575 ,Tear strength (kg/5cm) : wrap : 34.1 weft : 19.78 ,Breaking strength (Kg/cm2): wrap : 3.92 Kg weft : 2.59 Kg ,Adhesion of coating kgf/5cm : warp : 3.05 Kg weft : 3.02 Kg , Colour Fastness to Rubbing (Dry/Wet) (scale 1-5) : Dry = 3 Wet = 3 Frame :Material : Pine Wood , Moisture content : 10 -12 % ,Thickness of Plywood used : 12 mm & 18 mmSeat Foam :Material : Slab stock ,Density : 32 kg/m3 at seat and 28 kg/m3 at backWebbing : Material : Nylon Thickness : 2 mmLegs Material : PVC with 4 mm bush

Overhead Storage Units
Providing, supplying and installation of Over Head Unit of Dimensions 900 Width x 310 D x 785H. The construction of material shoule be knockdown with aesthically appealing made from 0.5mm(+/- 0.07mm) THK CRCA as per IS-513 for back panel, side panel, , side end cover, panel, top panel, , bottom panel and bottom cover. The door should be of metal type made from 0.6mm(+/-0.07) THK CRCA as per IS-513. Shelving: The shelves should be made up of 10 bend panel made of 0.8mm of Thick CRCA (D Grade-IS-513 the shelf should be minimum loading capacity of 36 Kg. The finish shoulf be of Epoxy powder coated to the thickness of 50 microns (+/-10).

Sofa for rest room of Additional Commissioner and Joint Commissioner
Providing, supplying and installation of sofa- Overall Size :Width : 80cm Depth : 82cm Height :85cm Seating Height : 44cm
Upholstery Material : Synthetic leather/PVC
Thickness : 1 mmWeight (GSM) : 575
Frame :•Material : Pine WoodMoisture content : 10 12 %
Foam :Material : Slab stockDensity : Seat 32 kg/m3 and 28 kg/m3 with recron filler Back 28 kg/m3
Webbing :Material : Nylon
•Thickness : 2 mmLegs :Material : PVC with 70 mm bush

Highback chair for Joint Commissioner and ADF Finance
Providing, supplying and placing of High Back Chair. SEAT/BACK A SSEMBLY: The seat is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured.The Back is made up of injection mou1ded glass filled nylon & upholstered using Mesh fabric with high tenacity yarn. seat size: 47.0 cm. (W) x 51.5 cm (D)back size: 45.0 cm. (W) x 65.3 cm. (H)
HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and hardness 16 ± 2 kgf as per IS:7888 for 25% compression. The adjustable armrest is designed with the following features :
• Up-Down adjustment- 8 steps (8 0±0.Scm range)Height adjustable armrest structure which is Powder Coated & fitted with an armrest top.Fixed Armrest Top is PU moulded over metal insert.
: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric.The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pa6. Lumbar pad has an adjustment of 8.0 ± 0.5 cm in height.The adjustable tilting mechanism is designed
with the following features.360° revolving type.Single point control.Front-pivot for tilt with feet resting on ground ensuring more comfort.Tilt tension adjustment.4-position locking with anti-shock feature.Seat/back tilting ratio of 1:2.
PNEUMATIC HEiGHT ADJUSTMENT. The pneumatic height adjustment has an adjustment stroke oi 10.0 ± 0.3 cn°.
Pedestal Assembly : the pedestal is injection moulded in black 30% glass filled nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch center dia is 66.1± 0.5 cm.: The twin wheel castors are injection moulded in black Nylon.
NECKREST : The Neckrest assembly consist of polypropylene pad with moulded polyurethane foam & covered with polyester fabric Neckrest is fixed to Back Assembly through Neckrest connector Neckrest assembly has height adjustment of4.2 ± 0.5 cm and rotation adjustment of overall76°+ 2°. .The complete neckrest assembly is retro fit to the main chair.

Premium Chair midback for Commissioner
Providing, supplying and installation of the premium chair The Cushioned seat inner is made of injection moulded glass filled poly-amide.Upholstered seat sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m³, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. seat size 48.5cm. (D) x 55.4cm. (W). Tolerance +/3 cm The Cushioned back is made of PU Foam with Polypropylene Injection molded Plastic Inner. back size 53.5 cm. (W) x 64.8cm. D tolerance +/3 cm The armrest having four range of adjustment
· Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other adjustment are provided in adjustable arm top sub assembly. Up-Down adjustment has 8 position (10.5±0.5cm range)
· Arm top swivel adjustment- 2 position, 12°±2° swivel inside
· Arm top width adjustment - Any position (2.0±0.5cm range each arm top)
· Arm top To - Fro Adjustment- any position (4.0±0.5cm range)
· Armrest top is made up of high density PU molded over glass filled Poly-amide inner.
The adjustable tilting mechanism is designed with the following features:360° revolving type.Forward tilt of sesat and back.
· Upright tilt lock. Tilt tension adjustment can be operated in seating position.3-position Tilt limiter.
: Seat depth adjustment is housed below the seat and integrated with the mechanism with help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0±0.5 cm.
: Back Assembly is connected to buff polish die cast aluminum Spine with an Up-Down mechanism assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5±0.5 cm.
: The heavy duty class 4 pneumatic height adjustment has an adjustment stroke of 13.0±0.3 cm.
: The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. 5 Nos. twin wheel soft castors are injection moulded in Poly-amide with PU lining, having 6.5±0.1cm wheel Diameter and assembled to pedestal. Overall Dimensions :WIDTH (W): 74.0 CM. DEPTH (D): 74.0 CM.
Height: 96.0 - 116.0 CM. SEAT HEIGHT (SH): 44.5 - 58.0 CM.

Sofa for Discussion room
Providing, supplying and installation of sofa Dimensions W x H x D (cm)- 81 x 83.5 x 80 .
Finish Color - Crush Brown
Seat Height (cm) - 46.5
Upholstery Material - Fabric
Primary Material -Pinewood
mid-back backrest . • Rounded armrests with soft foam seating provide ergonomic comfort. • synthetic leather or fabric

Highback chair for room of Commissioner and Command Center
Providing, supplying and placing of High Back Chair.: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area. The chair seat & back size are BACK SIZE 51.5 cm. (W) x 82.0 cm. (H)
SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D) The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. The adjustable armrest is designed with the following features
· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range) Armrest top is mounted on Armrest structure made of glass filled Nylon.
· Armrest Top is PU moulded over glass filled Nylon insert. : The mechanism is designed centre tilt synchro mechanismwith the following features: 360° revolving type. 3 position locking with anti shock mechanism. Tilt tension adjustment
PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm
PEDESTAL ASSEMBLY : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors) : The twin wheel castors are injection moulded in Black Nylon.
WIDTH (W): 76.1 CM.DEPTH (D): 76.1 CM. HEIGHT (H): 113.5-123.5 CM.SEAT HEIGHT (SH): 46.0-56.0 CM.

Corner Table for rest room of Secretary
Providing, supplying and installatio of cornern table L x W x H – 600 x 450 x 623
Table-top – 18 mm thick PLT Board in Remini Walnut
PLT – 18 mm thick in Remini Walnut & Royal Ivory
Configuration – Shelf storage

Premium Sofa for Commissioner Room
Providing and supplyign of 1 str sofa-Dimensions W x H x D (cm) - 98 x 90 x 82 Upholstery Material- Fabric + Syn Leather
Seatback: · Understructure: Understructure is made up of plywood & pinewood members. Plywood is 12±1mm thk. understructure is made by gluing, nailing & stapling. contact between the metal springs and the seat foam. This prevents seat foam from tearing. Complete purpose. Non woven fabric is stapled on the seat structure frame above the spring assembly to avoid direct 3.8mm is mounted on the seat structure using plastic spring mounting clip for support & additional cushioning 22x40mm, 22x75mm & 16X35mm without having major knots & defects on the surface. Zigzag spring of dia. [moisture resistance & termite proof as per IS:303]. Pinewood are of cross sections 22x64mm, 34x64mm · Foam: Seat is made of PU foam with density 28 kg/m3 of 75mm thickness with a two top layers of supersoft kg/m3 of thickness 6mm. Backrest top is glued with foam of density 28kg/m3 and 25mm thickness. 28kg/m3 and 10mm thickness and sides and the entire backrest are glued with the PU foam with density 60 PU foam with density 32 kg/m3 of 25mm thickness each. Seat front is glued with PU foam with density · Upholstery: Seat upholstery is made in polyester fabric and Black non-woven cloth with zipper for inserting non-woven of 30GSM with partitions. This laminated fabric is used on the upper backrest only. sandwitched laminated foam of density 32kg/m3 of 10mm thickness between a layer of fabric and white the loose seat foam. Backrest upholstery is made up of a combination of Polyester Fabric and Leatherite with.
3. Legs: Polypropylene legs with M8 stud in Black matt finish. 3 Seater with Corner Unit are assembled together with M8 bolts, nuts & .
Packet: Each packet contains one assembled sofa with the respective armrest without leg s and a separate hardware packet containing 4 nos. of plastic legs along with M8 bolts, nuts & washers. hardware packet containing 4 nos. plastic legs along with M8 bolts, nuts & washers

Sofa for Secretary Sir
Providing, supplyinh of sofa with Dimensions W x H x D (cm)- 1980 x 860 x 790
Style- Contemporary & Modern
Storage Included- No
Net Weight (kg)- 41
Seat Height (cm)- 43
Primary Material- Solid Wood
Delivery Condition- Knock Down
Upholstery Material- Fabric
angular backrest • Sturdy understructure made of pinewood with plywood cross-section. • fabric upholstery

Premimum backunit for Commissioner Room
Providing and Supplying and placing in position Back unit Body of the following specifications.2400 x 470 x 2325 CONSTRUCTION AND MATERIAL:Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottompanel(0.5mm CRCA for 600W and 0.8mm CRCA for 1200W), Back panel(0.5mm CRCA),Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA).
Shelves are 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513).
4 nos of shelves for 1950H and 5 nos of shelves for 2325H back unit.
Storage body is powder coated with Epoxy Polyester to the thickness of 50 microns(+/-10 micron).
VENEER DOOR:Made of 12mm Thick (±1) MDF with 3.5mm veneer both side and face coated with clearlacquer. All edges are edge banded with matching 1mm thick veneer lipping. Door isprovided with soft closing hinge. Handle is also provided for ease of opening. Storage issecured with 3 way cam lock.
GLASS DOOR:Made from the combination of aluminium alloy (63400) extrusion and 4mm cleartoughened glass. Aluminium extrusion of glass doors are powder coated with EpoxyPolyester to the thickness of 50 microns (+/-10 micron). Handle is provided for ease ofopening. RH Glass Door is provided with 3 way cam lock for security.