Public Works Department Tender

SITC of Dual Channel 400W Power amplifier, Amplifier Type: Class D, Nos. of channels 2, Power output : 2 × 200 W @ 4 ohms, 8 ohms, 70 /100 V, THD 20Hz-20kHz at 1 W <0.1% or better, Signal-to-noise ratio>106 dBA or better, Channel separation at 1 kHz >70 dB, Frequency Response 20 Hz - 20 kHz, Max. output current 11 Arms, Common Mode Rejection (CMR) 50 dB. complete in all respect as desired byh the Engineer in charge of work at site. For Column speakers

SITC of Dual Channel 240Watts Power amplifier, Class D Nos. of Channel : 2 Power output per channel : 240 W @ 4 ohms, 8 ohms, 70 /100 V Distortion, 1/8 rated power <0.05%, THD 20Hz-20kHz at 1 W <0.5% or better Signal To Noise Ratio: >97 dBA Channel separation (Crosstalk) >85 dBA High-pass filter 80 Hz HPF Frequency Response : 20 Hz to 20 kHz Energy Star Rated. Complete in all respect as desired byh the Engineer in charge of work at site. For Ceiling speakers Mix Match facility

SITC of DSP Processor, AEC Mic / Line Input: min 10 No's, Line Output: min 6 No's, USB Audio Interface 24Bit, 48Khz GPIO Contcats: 6 No's, Built in Digital Audio DANTE Network with 32 x 32 Channel, Frequency Response: 20Hz to 20KHz, Ethernet Port: Yes, RS232 connector for interfacing with 3rd party control systems, Crosstalk (inter-channel @ 1 kHZ): < -75 dB, Common mode rejection: Typically, -60 dB at 1 kHz, Latency: <1.8ms, Maximum output level: -31 dBu to +24 dBu, THD+N : <0.005%, Dynamic range: > 105 dB, Class-compliant USB connection for integration with soft codec conferencing applications. Complete in all respect as desired byh the Engineer in charge of work at site. For Audio conference & Media

SITC of Cardioid Condenser Boundary Microphone with Local or Remote Switching, ELEMENT: Fixed-charge back plate, permanently polarized condenser with two-state RGB LED indicator, Pick up Pattern: Cardioid Frequency Response : 20 - 20,000 Hz, Impedance : 130 ohms ornetter, Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa, Maximum Input Sound Level:130 dB SPL, 1 kHz at 1% T.H.D., Dynamic Range: 104 dB, 1 kHz at Max SPL, Signal-to-Noise Ratio: 68 dB, 1 kHz at 1 Pa, Touch-sensitive capacitive-type switch for three operating modes: touch-on/touch-off, press to talk, and press to mute. External contact closure capability allows a user to trigger an external device, RFI shielding, LOW FREQUENCY ROLL-OFF: 80 Hz, 18 dB/octave Microphone complete with 7.5 meter cable. (Each Microphone shall be share bewteen two participants). Complete in all respect as desired byh the Engineer in charge of work at site.

SITC of UHF Wireless Handheld microphone system, Cardioid Dynamic, Frequency Response : 35 Hz to 15,000 Hz Total Harmonic Distortion: 1.0 % or less, Dynamic Range 115 dB or higher, Switch function : Mute/unmute Multifunction button to switch to a backup frequency, Operating range: 100 m, RF Power Output High: 30 mW, Low: 10 mW (switchable), No. of Channel : 40 channels per band or better, UHF tuning bandwidth : 50 MHz or better, Antenna Input : BNC type, 50Ω, Microphone capsule : Interchangable industry standard thread, Auto squelch, Frequency Scan & IR sync for easy setup. Accessories Included: detachable Antennas, Rack mount kit. Complete in all respect as desired byh the Engineer in charge of work at site.

SITC of Two-Bay Recharging Station to recharge NiMH batteries in two handheld transmitters and/or Bodypack transmitters in any combination, Built-in safety feature monitors cell voltage and automatically turns off the unit if problems are detected, Automatic shut-off if alkaline (non-rechargeable) batteries are installed Automatic shut-off if damaged batteries are installed, Maintenance charging prevents battery self-discharge until the transmitter is removed from charger, Transmitters power off automatically when placed in the charging station and power on automatically when removed, Indicator LEDs for easy monitoring of power and charging status. Complete in all respect as desired byh the Engineer in charge of work at site.

SITC of Gooseneck Microphone with Quick-Mount Anti Shock Microphone Desk Stand for Podium Cardioid Condenser, Gooseneck Length: 18" - 20", Frequency Response : 30 - 20,000 Hz, Impedance : 250 ohms Maximum Input Sound Level: 139 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range: 114 dB, 1 kHz at Max SPL Signal-to-Noise Ratio: 70 dB, 1 kHz at 1 Pa, Low Frequency Roll-off: 80 Hz, 18 dB/octave, RFI Shielding Technology, Desk stand with On/Off switch facility, Desk Stand Should Effectively isolates microphone from noise, shock and vibration transmitted through the mounting surface. Complete in all respect as desired byh the Engineer in charge of work at site. For Podium

SITC of UHF Wireless Lavalier microphone system Cardioid Condenser, Frequency Response : 35 Hz to 15,000 Hz Total Harmonic Distortion: 1.0 % or less, Dynamic Range 115 dB or higher, Switch function : Mute/Unmute Multifunction button to switch to a backup frequency, Operating range: 100 m, RF Power Output High: 30 mW, Low: 10 mW (switchable), No. of Channel : 40 channels per band or beter, UHF tuning bandwidth : 50 MHz, Antenna Input : BNC type, 50Ω, Auto squelch, Frequency Scan & IR sync for easy setup. Accessories Included: detachable Antennas, Rack mount kit. Complete in all respect as desired byh the Engineer in charge of work at site.

SITC of UHF Wireless Headworn microphone system, Omnidirectional Condenser, Frequency Response : 35 Hz to 15,000 Hz, Total Harmonic Distortion: 1.0 % or less, Dynamic Range 115 dB or higher, switch function : Mute/unmute, Multifunction button to switch to a backup frequency, Operating range: 100 m RF Power Output High: 30 mW, Low: 10 mW (switchable), No. of Channel : 40 channels per band or better UHF tuning bandwidth : 50 MHz, Antenna Input : BNC type, 50Ω, Auto squelch, Frequency Scan & IR sync for easy setup. Accessories Included: detachable Antennas, Rack mount kit. Complete in all respect as desired byh the Engineer in charge of work at site.

Supply and erection of Digital Podium Top & Body: Top and Body should be Metal, Mechanism: The system should have a Top Sliding Mechanism, Keyboard/Mouse Tray: It should have sliding Tray for Keyboard/Mouse, Visualiser Tray: It should have a Provision for Visualiser with a Sliding Tray, Wheels: Its should have Wheels for easy movement, Rack Space: Its should have Rack Space for keeping Amplifier, CPU, Microphone receiver or more equipment, Screen Size: The system should consist of 21.5 Inches Touch Screen Monitor, Type: The monitor should be LED backlit, Resolution: The monitor should have a native resolution of 1920x1080, Port: The monitor should come with a USB port for PC Connection, Brightness: The monitor should have a Luminosity of 250 cd/m^2 or more, Input port: The monitor should have a VGA, HDMI or DVI Input port, Supply: The monitor should support Power Supply of 100-250VAC, Laptop Interface: The system should consist of the atleast following ports on the interface with integrated Switcher having following Poer in charge of work at site. Wall Platem (1/8in) TRS Stereo, Output Video Encoding HDBaseT Class B, Encoding Data Rate 10.2Gbps, End to End Latency 10µs (micro seconds), Audio Formats HDMI Out: 2ch Analog/PCM | Multichannel: LPCM up to DTS-X and Dolby Atmos Audio Out/De-embed: 2ch Analog/PCM, Video Resolutions (Max) 3840x2160p @60Hz 8bit 4:2:0, Supported Standards DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100, Maximum Pixel Clock 297MHz. HOMI HDMI | HDCP 2.2 | EDID | CEC Pass-through | DVI/D supported with adapter, MaseT HDMI | USB | HDCP 2.2 | EDID | 1-way PoH (RX power

SITC of NUC PC for Podium - i5 or better intel processor, 10th or better generation, 8GB or more DDR4 RAM, 256GB or more SSD drive, 2GB or better Graphic card, Connectivity: HDMI, USB, RJ-45 port complete with Keyboard and Mouse. Complete in all respect as desired by tegh Engineer in charge of work at site.

SITC of Flip Up In-Desk Connectivity with 1x Mains, USB Charging, 2x HDMI, USB-C & RJ-45 Passthrough, Two USB ports for Phone/ Tablet Device Charging, USB-C Port Connection for Laptops or other Devices HDMI Port Connections for Laptops or other Devices, Video Passthrough (Max): HDMI: 3840x2160 @60Hz 4:4:4 8bit, USB-C: 3840x2160 @60Hz 4:4:4 8bit, USB Charging: 5v 2.4a per port. Complete in all respect as desired by tegh Engineer in charge of work at site. Cable cubby on table

SITC of 18Gbps 4K HDR HDBaseT Extender with HDCP 2.2 and 2-way PoH, high frame rate HDR-10 and HLG content to be transmitted over standard 10Gbps HDBaseT, both visually losslessly and without latency. 4K UltraHD extender set, HDBaseT™ Class B transmission of 4K HDR up to 70m/230ft, Full UHD 4K transmission supporting HDMI 2.0 video standards, Supports all high definition resolutions including 4K HDR @60Hz 4:2:0 10bit, Transmits discreet wide-band bidirectional IR/RS-232 control signals together with HDMI over a single Cat5e/6 cable, Supports 2ch PCM and 7.1 multichannel audio up to DTS-X and Dolby Atmos, 2-way PoH (Power over HDBaseT™), HDCP 2.2 compliant, 3D compatible, Threaded bushings allow use of both standard and locking DC power plugs, Transmitter Inputs: 1x HDMI In: 19-pin type A, Outputs: 1x HDBT Out: 8-pin RJ-45 Female, 1x HDMI Loop Out: 19-pin type A, Receiver Inputs: 1x HDBT In: 8-pin RJ-45 Female, Outputs: 1x HDMI Out: 19-pin type A, Supported Standards: DCI | RGB | Dolby Vision @ 30Hz | HLer In charge of work at site. wall plate HDMI: 600MHz | HDBaseT: 297MHz, HDMI: HDCP 2.2 | EDID | DVI/D supported with adapter (not included), HDBaseT: HDMI | HDCP 2.2 | EDID | 2-way PoH | Bidirectional IR, and RS-232, CEC: CEC Pass-through – Requires CEC compatibility between source and display, IR: 1x IR TX: 3.5mm (1/8in) TS Mono | 1x IR RX: 3.5mm (1/8in) TRS Stereo. Complet in all respect as desired by the engineer in charge of work at site.

SITC of 4K HDR 8x8 Pure HDMI Matrix with Scaling Outputs, Audio De-embed & ARC, Uncompressed HDMI signal distribution supporting full 18Gbps bandwidth and 4K60 444 video content, HDR video standards including HDR10, HDR10+ Dolby Vision and HLG, Balanced analog and digital S/PDIF audio de-embed for distributing audio to an amplifier or DSP, Each HDMI output supports 4K to 1080p downscaling to support mixed resolution systems, Output downscaling controlled intuitive web UI or API commands, Automatic or manual CEC power triggering of displays through HDMI, outputs via API. Allows custom CEC commands to expand compatibility with isplays. Audio Return Channel supported on all 8 outputs allowing up to 5.1 audio from smart TV apps to be distributed to external audio systems such as an AVR or stereo amplifier. Supports AV Mute for enabling disabling HDMI outputs per zone, API triggered standby mode puts unit into low power state during downtime, EDID Management through API or front panel buttons, 1U 19” chassis forer in charge of work at site. Wall platem (1/8in) TRS Stereo, Output video Encoding HDBaseT ClassB, Encoding Data Rate 10.2Gbps,End to End latency 10µs (Micro seconds), Audio Forma

SITC of 3-Input In-wall HDBaseT™Transmitter with USB Host & CEC Trigger. 2-gang US/UK Back-box, 3-switchable inputs: 2 HDMI and USB-C supporting: 4K/30 4:4:4 & RGB or 4K/60 4:2:0 8-bit, Latest HDR standards, HDR-10 and Dolby Vision™ at 30Hz, HDCP 2.2 encryption, 4K UHD content and sources, HD Multichannel audio up to DTS:X and Dolby Atmos™, USB-C port supports alt-mode functionality for A/V and USB data, USB-C charging for connected devices up to 2A, Compatible with DVI-I and DP++ v1.3 signals, 2ch analog audio input for sending separate stereo audio to RX, USB2.0 host port, Automatic or manual CEC triggering, Transmission Encoding:HDBaseT Class C | PAM16 Encoding, End to End Latency: 10µs, Maximum Transmission Bit Rate: 10.2Gbps, HDMI: v2.0b TMDS | 340MHz Maximum, Maximum Sampling Rate: 192KHz, Maximum Audio Channels: 32, USB Host (HDMI Inputs): 1x Type B host | Maximum data throughput: 190Mbps, HDCP: Pass-through, 2.3 Supported, EDID: Pass-through, from RX. Complet in all respect as desired by the engineer in charge of work at site. Wall Plate

SITC of 4K UHD HDBaseT™ Receiver with Bidirectional IR, RS-232 and PoH (4K: 35m/115ft | 1080p: 70m/230ft), Compatible with 4K HDR source content, Compatible with HDCP 2.2 protected content, 2-way PoH enabled for convenient PSU-free installation, RS-232 and IR passthrough for control of peripheral equipment, Output Video Encoding: HDBaseT Class B, End to End Latency (Max): 10μs (micro seconds), Decoding Data Rate: 10.2Gbps, Maximum Pixel Clock: 297MHz, Supported Standards: DCI | RGB | HDR10 | BT.2020, Audio Formats : 2ch PCM | Up to DTS-X and Dolby Atmos, Maximum Sampling Rate: 192KHz, Communication and Control HDMI: v2.0 TMDS | HDCP 2.2 | EDID | DVI/D Supported with adapter, HDBaseT: HDCP 2.2 | EDID | PoH 2-way | Bidirectional IR, RS-232, IR: 1x IR TX 3.5mm (1/8in) Mono | 1x IR RX 3.5mm (1/8in) Stereo | Bidirectional over HDBaseT, RS-232: 1x 3-pin Phoenix Connector | Bidirectional over HDBaseT. complete in all respect as desired by the Engineer in charge of work at site.For wall plate

SITC of 22U - 28U AV Floor Rack with power distribution unit, mounting hardware, shelf trays, fan units, floor rack Ventilation for heat dissipation, Front glass access door, movement wheels facility complete with standard accessories. Complete in all respect as desired by the Engineer in charge of work at site.

SITC of 4K HDR 4:4:4 60Hz HDMI 1.0 Mtr. Cable with Ethernet and VW-1 Rating, Audio and Video Inputs: 1x HDMI: 19-pin type A Male, Outputs: 1x HDMI: 19-pin type A Male, Output Video Encoding: Uncompressed, Encoding Data Rate: 18Gbps, Max End to End Latency: Zero, Supported Standards: DCI | Dynamic HDR | Static HDR | HDR10+ | SL-HDR1 | Dolby Vision | HLG | PQ | BT.2020 | BT.2100, Audio Return Channel (ARC): Supported, Audio Formats: 2ch PCM | Multichannel LPCM | DTS-X | Dolby Atmos, Maximum Sampling Rate: 192KHz, Complete in all respect as desired by the Engineer in charge of work at site.

SITC of 4K HDR 4:4:4 60Hz HDMI 2.0 Mtr. Cable with Ethernet and VW-1 Rating, Audio and Video Inputs: 1x HDMI: 19-pin type A Male, Outputs: 1x HDMI: 19-pin type A Male, Output Video Encoding: Uncompressed, Encoding Data Rate: 18Gbps, Max End to End Latency: Zero, Supported Standards: DCI | Dynamic HDR | Static HDR | HDR10+ | SL-HDR1 | Dolby Vision | HLG | PQ | BT.2020 | BT.2100, Audio Return Channel (ARC): Supported, Audio Formats: 2ch PCM | Multichannel LPCM | DTS-X | Dolby Atmos, Maximum Sampling Rate: 192KHz, Complete in all respect as desired by the Engineer in charge of work at site.

SITC of 2 Mtrs Flexible 4K, 18 GBPS USB-C Cable Jacket Material : PVC Connector Nickel-plated Supports device charging up to 60 watts @ 3 amps. Complete in all respect as desired by the Engineer in charge of work at site.

SITC of USB-A to USB-A Cable - 2 Mtrs, - USB3.1 Gen 1, 3A/5V/15W. Complete in all respect as desired by the Engineer in charge of work at site.

SITC of Speaker Cable, 2 core 1.5 Sq mm Speaker Cable(as per actual). Complete in all respect as desired by The Engineer in charge of work at site.

SITC of Microphone Cable, 2 core sheilded 20/22 AWG Microphone Cable (as per actual). Complete in all respect as desired by The Engineer in charge of work at site.

SITC of Shielded/ twisted pair CAT5e/6A/7 cable (as per actuals). Complete in all respect as desired by The Engineer in charge of work at site.

SITC of Various Connectors & Accessories complete with standard accessories. Complete in all respect as desired the Engineer in charge of work at site.

SITC of 86 Inch or Higher LED Back Lit Panel, Panel Technology: IPS, Native Resolution: 3840 x 2160 (UHD)4K, Brightness: 500cd/m2 or more, Contrast: 10,00,000 : 1 or more, Operating System: WebOS, Orientation: Portrait & Landscape, Viewing Angle(H x V): 178 x 178, Operation Hours: 24x7 Hrs, Haze: 28%, IP Rating: IP5X, Surface Treatment: 3H Antiglare treatment on surface, Internal Memory: 16 GB Storage, Key Features: Temperature Sensor, Auto Brightness Sensor, Embedded CMS (Local Contents Scheduling, Group Manager), Multi-Screen (PIP, PBP (4)), Screen Share, Video Tag (4), Play via URL, Rotation (Screen Rotation, External Input Rotation), Gapless Playback, Tile Mode Setting (Max. 15 × 15), Connectivity - Input Ports Digital: HDMI -3 or more , DVI-D-1 or more Display Port-1 or more, External Control: RS232C(1), RJ45(1), IR(1, Internal), Built WIFI: Yes, Audio Power: 20W(10W x 2) ) or above, Power Supply: 100 – 240 V, 50/60 Hz, Certifications(Safety/EMC/ER): UL/CB,FCC ,BIS, Warranty: 3 years on site comprehensier in charge of work at site. Wall Platem (1/8in) TRS Stereo, Output video Encoding HDBaseT Class B, Encoding Data Rate 10.2Gbps,End to End latency 10µs (Micro seconds)

SITC of 5UM5N, Screen Size: 65 Inch or Higher LED Back Lit Panel, Panel Technology: IPS, Native Resolution : 3840 x 2160 (UHD)4K, Brightness: 500cd/m2 or more, Contrast(Dynamic): '1000000:1, Operating System: WebOS, Orientation: Portrait & Landscape, Viewing Angle(H x V): 178 x 178, Operation Hours: 24x7 Hrs support, Haze: 28%, RAM: 2 GB, 16 GB Storage, Connectivity - Input Ports Digital: HDMI -3 or more , Display Port-1 or more, External Control: RS232C(1), RJ45(1), IR(1, Internal), USB: 1 or more, Output Ports Digital: HDMI -1 or more, External Control: Main : RS232C(1), Built WIFI: Yes, Audio Power: 20W(10W x 2) ) or above, Power Supply: 100 – 240 V, 50/60 Hz, Certifications(Safety/EMC/ER): CB,FCC ,BIS, Warranty: 3 years on site comprehensive warranty, Wall mount: Required, Accessories: Remote control, Standard cable. Complete in all respect as desired by the Engineer incharge of work at site.

SITC of 4 Channel Network video recorder. complete in all respect as desired by the Engineer in charge of work at site.

SITC of 4 MP ColorVu with Smart Hybrid Light Fixed Turret Network Camera, High quality imaging with 4 MP resolution,Support Human and Vehicle Detection, Smart Hybrid Light: advanced technology with long range, Efficient H.265+ compression technology,Support on-board storage up to 512 GB (SD card slot) (Optional),Built-in microphone for real-time audio security, Water and dust resistant (IP67). complete in all respect as desired by the Engineer in charge of work at site.

SITC of 4-Port Unmanaged PoE Switch provides seamless connectivity and power distribution for up to four devices, optimizing your network efficiency, High-Speed Data Transmission: With 100Mbps data transfer speeds, Plug-and-Play Setup. Complete in all respect as desired by the Engineer in charge of work at site.

SITC of 2TB Surveillance HDD for recording, AllFrame technology, Form Factor 3.5 inch, AF Yes, Recording Technology CMR, Interface Sata 6gb/Sec, ROHS compliant, Max Drive Bay support 8.. Complete in all respect as desired by the Engineer in charge of work at site.

SITC of6U Network Rack. Complete in all respect as desired by the Engineer in charge of work at site.

SITC of 24 Port POE 193 Watt 10/100/1000 Mbps Smart Data switch having IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, 802.1p priority, Energy Efficient Ethernet, Switching capacity 76 Gbps, HOL blocking prevention, 802.1p priority based, hardware queues, priority queuing and Weighted Round-Robin (WRR) Jumbo frame 2 No. SFP UPLINK 1GBPS Complete in all respect as desired by the Engineer in charge of work at site

SITC of 24 Port Fully loaded CAT6 Patch Panel with numbering, cable manager, inlcudingpunching , termination and testing Complete in all respect as desired by the Engineer in charge of work at site

SITC of 1 mtr. Long UTP patch cord having RJ 45 connector on both ends, speed of 1000 Mbps. Complete in all respect as desired by the Engineer in charge of work at site.

SITC of 2 mtr. Long UTP patch cord having RJ 45 connector on both ends, speed of 1000 Mbps. Complete in all respect as desired by the Engineer in charge of work at site.

SITC of CAT6 UTP Networking Cable of 10/100/1000Mbps DCC in existing PVC conduit complete in all respect as desired by the engineer in charge at site.

SITC of OEM manufactured Wall Mount bracket for above PTZ Cameracomplete in all respect as desired by the Engineer in charge of work at site.

SITC of 1080p60 PTZ Conference Camera with USB 3.0, HDMIOut, Auto Framing & Presenter Tracking, driver-less setup, Compatible with popular meeting software such as Skype, Teams, Zoom, HDMIoutputfor passthrough to local monitor, 1/2.7inch, 2.07M CMOS sensor that captures crystal clear 1080p HD video, 12xoptical and 16x digital zoom, Dualvideo output via USB 3.0 or network connection, Network output supports HTTP, RTSP, RTMP & Multicast, Integrated web interface with live video preview and intuitive configuration options, Free PC control and configuration software, Flexible control options via the RS-232, LAN or IR, Video Inputs/Outputs: 1xUSB3.0 Type B female, 1x8-pin RJ-45 Female, 1xHDMI female Type A, VideoResolutions (Max): 1920x1080p @60Hz, USB 3.0: 2m (passivecable) 15m (with CAB-UAOC-15), Cat5eorHigher: 100m/328ft, Output Video Encoding: MJPEG/YUY2|UVC1.5, Network 65/MJPEG/CBR or VBR upto 2Mbps Lens: 12x, f=3.5mm~42.3mm, F1.8~F2.8, Shutter: 1/30s~1/10000s, White Balance: Auto, Indoabove material, cutting and filling up of chases (with finishing the surface):-2 | EDID | DVI/D supported with adapter (not included), HDBaseT: HDMI | HDCP 2.2 | EDID | 2-way PoH | Bidirectional IR, and RS-232, CEC: CEC Pass-through Requires CEC compatibility between source and display, IR: 1x IR TX: 3.5mm (1/8in) TS Mono | 1x IR RX: 3.5mm (1/8in) TRS Stereo. Complet in all respect as desired by the engineer in charge of work at site.e should come up with standard 3 PIN

SITC of 4-Input 4K Presentation Switcher with USB C 60W PD and Matrix Outputs, USB 3.0, MST, Multiview & Wireless Casting, USB 3.0 switcher, support for a wireless host through Wireless Dongle, Automatic or manual switching of 4 connected sources (2 HDMI & 2 USB-C), with assignable USB host connection, 60W PD on the USB C Ports, Supports input resolutions up to 4K30 4:4:4 via USB-C or HDMI, Wireless screensharing via Apple Airplay or Miracast, Dual output via HDMI Multiview processing up to 4 simultaneous sources, Analog audio output allows extraction of Audio, Compatible with all major conference software including Zoom, Microsoft Teams, Cisco WebEx and more, Built-in USB 3.0 hub for connection of peripheral devices such as speakerphones or cameras, Seamless switching in both single view and Multiview modes, USB-C input supports alt-mode for both A/V (MST Supported), Ethernet, and Data communication over a single cable, API uses Telnet over TLS for secure and encrypted communication, Integrated webserver forabove material , cutting and filling up of chases (with finishing the surface);- oding HDBaseT Class B, Encoding Data Rate 10.2GBPS, End to End latency 10µs (micro seconds), Audio formats HDMI ot: 2Ch Analog/PCM, Video Resolutions (Max) 3840x2160p @60Hz 8bit 4:2:0, Supported Standards: DCI | RGB| HDR| HDR10|Dolby vision up to 30Hz |HLG| BT.2020| BT.2100, Maximum Pixel Clock 297MHz, HDMI HDMI|HDCP 2.2|EDID| CEC pass-Trhough |DVI/D supportd with adapter, HDBaseT HDMI USB|HDCP 2.2 |EDID/1- Way PoH (RX powers Tx) | Bidirctional RS-232 | CEC, USB 4x Type A (device) USB Hub compatible|Maximum: 7 Devices, 23 Endpoints maximum Uplink speed: 190MBPS. Complete in all respect as desired by the Engineer in charge of work at site. TKIP, AES, WPA.

SITC of 4K HDR 4:2:0 60 Hz HDBaseT2.0 Receiver with USB Device Inputs, Ethernet PoH (4K: 35m/115ft) Content up to 4K/60 4:2:0 & RGB 8-bit Ũ The latest HDR standards, including HDR-10, HLG and Dolby Vision at 30Hz Ŭ HDCP 22 encryption technology ensuring compatibility with the latest 4K UHD content and sources Ű HD Multichannel audio up to DTS:X and Dolby Atmos via HDMI Ŭ 2160p 4:2:0 60 Hz HDR content from a source to a display or projector using HDBaseT up to 35m/115ft Compatible with DVI-I and DP++ v1.3 signals from compatible devices. USB 2.0 passthrough offering 190Mbps transfer and HID extension, Features 4 USB device ports Supports analog audio pass -through from transmitter to receiver Supports analog audio de -embed from HDMI output, Bi-directional RS-232 and CEC pass-through communication Backwards compatible with HDBaseT 1.0 transmission and receiving devices (lowest denominator takes priority). PoH from RX>TX, Input 1x HDBT In: 8-pin RJ-45 Female 4x USB Type A (Device), Output 1x HDMI Out: labove material, cutting and filling up of chases (with finishing the surface):-2 | EDID | DVI/D supported with adapter (not included), HDBaseT: HDMI | HDCP 2.2 | EDID | 2-way PoH | Bidirectional IR, and RS-232, CEC: CEC Pass-through -Requires CEC compatibility between source and display IR: 1x IR TX: 3.5mm (1/8in) TS Mono | 1x IR RX: 3.5mm (1/8in) TRS Stereo. Complet in all respect as desired by the engineer in charge of work at site e should come up with standard 3 PIN XLR Connector, Certifications: It should have CE, FCC and RoHS. complete in all respect as desired by tegh Engineer in charge of work at site.s TX) | Bidirectional RS-232 | CEC, USB 4x Type A (device) USB hub compatible | Maximum: 7 devices, 23 ednoints Maximum uplink speed: 190Mbps.. Complete in all respect as desired by the Engineer in charge of work at site