Industries And Commerce Department Tender

Supply/Erection/Testing & Commisioning of Translator module, shall allow addressable loop communication to 32 wireless field devices, system devices can be configured throughtranslator module or software, loop powered, two orthogonal antennas for safe and reliable wireless communication, shall have high wireless tranmission range with wireless field devices of max. 150 meter in open space, maximum radiated power 5dBm (3mW), enabled with 7 operating frequency channels for bi-directional wirelesss communication,operating frequency range 865MHz, IP 65 rated.Approved by LPCB for EN 54-18 and EN 54-25 standard complete as per directions of Engineer In charge.

Supply/Erection/Testing & Commisioning of Mounting Accessories like back box for detectors, devices & cable glands, etc. complete as per directions of Engineer In charge.

Supply/Erection/Testing & Commisioning of Intelligent Analogue Optical Smoke Detector with advanced optical chamber and smoke inlet design to provide resistance to entry of dust to provide immunity to false alarms, programmable multiple smoke senstivity level setting, bi-directional in-built short circuit isolator to protect against cable faults, dual bi-colour LED's with 360o view of status,auto addressable/ electronically addressed, utilises fully digital communication addressable protocol with high noise rejection. Approved by LPCB for EN 54-7 & EN 54-17 standard complete as per directions of Engineer In charge.

Supply/Erection/Testing & Commisioning of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-Complete as per the direction of Engineer-in- charge.

Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface)

Supply/Erection/Testing & Commisioning of Standard Detector Base for mounting the compatible addressable detectors complete as per directions of Engineer In charge.

Supply/Erection/Testing & Commisioning of Intelligent Sounder Interface Module allows to connect conventional Sounder or Sounder Beacon to addressable loop, with in-built short circuit isolator, allows for two stage alarm capability,addressed through auto and manual options. Approved by LPCB for EN 54-17 & EN 54-18 standard complete as per directions of Engineer In charge.

Supply/Erection/Testing & Commisioning of Intelligent Analogue Multi-Criteria (combination of smoke and heat) Detector with special algorithms to utilise information from both smoke and heat sensing elements to ensure high level of immunity to false alarms without compromising genuine alarm sensing performance,programmable multiple smoke senstivity level and 9 modes of operation, bi-directional in-built short circuit isolator to protect against cable faults, dual bicolour LED's with 360o view of status, autoaddressable/electronically addressed, utilises fully digital communication addressable protocol with high noise rejection. Approved by LPCB for EN 54-5, EN 54-7, & EN 54-17 standard complete as per directions of Engineer In charge.

Supply/Erection/Testing & Commisioning of Intelligent Analogue Manual Call Point with resettable operating element, with in-built bidirectional short circuit isolator. Bi-Colour LED for local indication of device status, single action operation, reset to normal condition using special reset key, clearly visible alarm flag in the activated state. Approved by LCPB for EN 54-11 standard.Complete as per the direction of Engineer-in- charge.

Supply/Erection/Testing & Commisioning of Wall mounted automatic Powder based 6 kg Capacity Fire extinguisher using two heat sensing quartzoid bulb with valves for detection & extinguishing of fires, Extinguishing Media - Powder Based (as per IS 4308 ), Expellant Medium - N2 Based,Extinguishing Agent of Powder Based Fire Extinguisher - ABC MAP 90,Discharge Mechanism - Automatic,Cylinder/Vessel Material - Mild Steel,Valve Material - Stainless Steel, Class of fire for which Fire Extinguisher is suitable- Class A,Class B, Class C, Class D, Class E, Fire Rating for Class -A Fire Extinguisher as per EN3 - 21A,Fire Rating for Class -B Fire Extinguisher as per EN3 -113 B,Warranty 5 years,Capacity 6kg. Complete as per the direction of Engineer-in- charge.

Less Credit for old material.

Supply/Erection/Testing & Commisioning of Wireless Intelligent Photo-Electric (Optical) Smoke Detector with advanced dual path optical chamber design, optimised performance utilising internal algorithm, programmable three sensitivity levels/settings (High, Normal, and Low), 7 operating frequency channels for bi-directional wireless communication with compatible translator/expander module, operating wireless frequency 865MHz, maximum radiated power 14 dBm (25mW), communication range of max. 200 meter in open space, two tri-colour (Red/Amber/Green) LED's provided for functional and battery level status indication, support magnet test or aerosol based tester, dual trap/filter to prevent entry if insects and dust particles, provided with dual lithium batteries (primary and secondary power source). Approved by LPCB for EN 54-7 and EN 54-25 standard complete as per directions of Engineer In charge.

Supply/Erection/Testing & Commisioning of 2C x 1.5 Sq.mm PVC insulated copper conductor armoured cable complete as per directions of Engineer In charge.

Supply/Erection/Testing & Commisioning of Single Loop Analogue Addressable Fire Alarm Control Panel, with a single loop driver card, loop current 500mA maximum per loop, dual flash based microprocessor, supports to connect 240 addressable devices one each loop via fully digital communication protocol, equipped with a white backlit display (240x64 pixel resolution) graphical LCD Display with atleast 6 lines of information, 200 fire zones (soft zones), fully programmable via alphanumeric keypad or configuration software, dedicated USB and RS-232 serial port for direct or PC connection. 5500 events storage, loop current 500 mA, panel shall be equipped with in-built multi-meter for live monitoring of loop current, earth voltage, loop voltage etc., installer's logo application, can be networked to compatible addressable panels and repeater panels by adding a network card, features battery charger status and temperature, supports programmable cause / effect on outputs, panel housing meets IP30 ingress protection classific complete as per directions of Engineer In charge.

Supply/Erection/Testing & Commisioning of Intelligent Analogue Class-P Heat Detector with two thermal senstivity level, the two level corresponds to rate-of-rise (ROR) A1R Class (most sensitive) and Class BS (least sensitive), thermal alarm threshold for ROR A1R Class 58oC and BS Class 78oC, bi-directional in-built short circuit isolator to protect against cable faults, dual bicolour LED's with 360o view of status, autoaddressable/electronically addressed, utilises fully digital communication addressable protocol with high noise rejection. Approved by LPCB for EN 54-5 & EN 54-17 standard complete as per directions of Engineer In charge.

Supply/Erection/Testing & Commisioning of Wireless Intelligent resettable type Manual Call Point, 7 operating frequency channels for bidirectional wireless communication with compatible translator/expander module, operating wireless frequency 865MHz, maximum radiated power 5 dBm (3mW),communication range of max. 150 meter in open space. Approved by LPCB EN 54-11, and EN 54-25 standard complete as per directions of Engineer In charge.

Supply of Wireless Heat (Thermal) Detector with heat/thermal sensor for optimised performance utilising internal algorithm, thermal sensor alarm temperature of 58oC (Class A1R ROR) or 78oC (Class BS High Temperature), programmable multiple sensitivity level, 7 operating frequency channels for bi-directional wireless communication with compatible translator/expander module,operating wireless frequency 865MHz, maximum radiated power 14 dBm (25mW), communication range of max. 200 meter in open space, two tricolour (Red/Amber/Green) LED's provided for functional and battery level status indication, support magnet test or aerosol based tester, dual trap/filter to prevent entry if insects and dust particles,provided with dual lithium batteries (primary and secondary power source). Approved by LPCB EN 54-5, and EN 54-25 standard.