Chandigarh Administration Tender

... More
The Chandigarh Administration has issued a formal invitation for competitive bids for Development Of City Forest At Colony No.4 Sukhna Choe Forest Industrial Area Phase-1, Chandigarh in Chandigarh, with an estimated contract value of Rs. 12,41,82,695. The bid opening date for this tender is 13-11-2026 and the last date for bid submission is 26-11-2026. Interested bidders for Chandigarh Administration tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Chandigarh Administration Tender - Chandigarh Tender

Opening Date13 Nov 2026
Closing Date26 Nov 2026
Tender Amount₹ 12,41,82,695 
Notes
Download

Costs

Description

Development Of City Forest At Colony No.4 Sukhna Choe Forest Industrial Area Phase-1, Chandigarh

AI Insights

Unlock AI Insights for this Tender

Sign in to request AI-powered insights, eligibility criteria and automated analysis for this tender.

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil

1629.8799999999994

172

281496.57

... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

19683.14

17

336975.36

... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

529.8000000000001

190

101038.16

... More
Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.

165.98000000000002

681

113130.31

... More
Preparation and consolidation of sub grade after loosening of the ground upto a level of 150 mm below the sub-grade level, watered, mechanically/manual means and compacted in layers to meet requirement of table 300-2 for sub-grade construction complete in all respect in all respects and to the entire satisfaction of the Engineer in charge. N.S.

2481.58

36

90329.51

... More
Providing, laying, spreading and compacting granular sub base material 100-200 mm thick compacted of natural sand, morrum, gravel crushed stone or combination thereof as per MORT&H specification confirming to clause 401 coarse graded grading – 3 as per table 400.1 of MORT&H specification, including spreading on the prepared sub grade with the help of tractor with planner of adequate capacity maintaining the requited slope and grade during operation, rolling with road roller 8-10 tone with the grade and cross fall (camber) to be checked and any high spot or depressing which becomes apparent, corrected by removing or adding fresh material, including cost of tools and plants, carriage of material from stacks, templates, barrier, lighting arrangement at night, chowkidar and maintenance of diversion etc. complete in all respect as per MORT&H specifications, density of GSB as laid 2 gms/cc complete in all respect and to the entire satisfaction of Engineer in charge.

1637.84

1977

3239074.28

... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete (DSR 5.9.1)

2360.1699999999996

381

900546.47

... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

210.67

902

190068.58

... More
Centering and shuttering including strutting, propping etc. and removal of form Shelves (Cast in situ)

1.67

902

1506.69

... More
Centering and shuttering including strutting, propping etc. and removal of form Lintels, beams, plinth beams, girders, bressumers and cantilevers

307.7099999999999

716

220480.37

... More
Centering and shuttering including strutting, propping etc. and removal of form Columns, Pillars, Piers, Abutments, Posts and Struts

278.76

935

260735.38

... More
Centering and shuttering including strutting, propping etc. and removal of form Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like

29.84

381

11385.75

... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR 5.22.6)

103913.69999999998

104

10904703.68

... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

9460.6

104

992795.36

... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth

219.19

729

159804.85

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR 4.1.10)

381.26000000000005

6342

2418179.68

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

1.56

7665

11958.62

... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm

169.4

1579

267521.56

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) (DSR 5.1.2)

764.87

8801

6732010.95

... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

29.73

10559

313946.42

... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

3.95

11194

44219.66

... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum

41.8

9248

386571.42

... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate I retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth levelConcrete of M30 grade with minimum cement content of 350 kg /cum

13.25

9395

124483.75

... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate I retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. Concrete of M30 grade with minimum cement content of 350 kg /cum All works above plinth level upto floor V level

55.42

9741

539848.44

... More
Add for using extra cement in the items of design mix over and above the specified cement content therein.

24.03

713

17150.21

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR No. 4.1.2)

0.5

8115

4057.82

... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (DSR 10.2)

94601.18

130

12306667.51

... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (DSR 10.25.2)

2638.41

167

443094.58

... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube

111.69

191

21387.52

... More
Galvanised Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (NS)

110349.45

154

17060024.97

... More
Providing and Fixing 1" dia Synthetic Manilla Rope on existing Bamboo Railing by looping it around the railing to give it enough strength to act as railing to the entire satisfaction of engineer in charge (NS)

5657.09

105

593994.45

... More
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.l. limpet washers or with G.l. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m2

254.92

1417

361428.13

... More
Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 × 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, non-combustible as per BS 476 (Part 4)-1970 and light reflectance of 85% (minimum), laid in true horizontal level suspended on interlocking hot dipped galvanised iron T-grid complete with main runners, cross runners, intermediate cross tees, hanger rods, dash fasteners, level adjusters, perimeter wall angle and all accessories, complete as per specifications, drawings and directions of the Engineer-in-Charge. With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles.

254.92

1855

473093.28

... More
Providing and fixing 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/tiles with GI framework, complete with jointing and finishing using recommended calcium silicate based jointing compound, fibre joint tape, primer etc., all complete as per manufacturer's specifications and as directed by the Engineer-in-Charge. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/tiles.

381.02

3033

1155793.69

... More
Providing and Fixing Synthetic Bamboo Railing of diameter 75mm & thickness 3mm of required length made up of 100% recyclable, ASA resins added material for high durability and strength having minimum warranty period of 10 Years. It should be fire resistant & should be tied with one another with screws and bamboo ropes to join the members together as per the site and structural strength to the entire satisfaction of Engineer in Charge (NS).

3676.49

1175

4321714

... More
Providing and Fixing Synthetic Bamboo Railing of diameter 55mm & thickness 3mm of required length made up of 100% recyclable, ASA resins added material for high durability and strength having minimum warranty period of 10 Years. It should be fire resistant & should be tied with one another screws and bamboo ropes to join the members together as per the site and structural strength to the entire satisfaction of Engineer in Charge (NS).

2713.42

956

2595114.89

... More
Providing and Fixing Synthetic Bamboo Railing of diameter 95mm & thickness 3mm of required length made up of 100% recyclable, ASA resins added material for high durability and strength having minimum warranty period of 10 Years. It should be fire resistant & should be tied with one another screws and bamboo ropes to join the members together as per the site and structural strength to the entire satisfaction of Engineer in Charge (NS).

344

1394

479742.4

... More
Providing and Fixing Wooden planks of 35mm thick second class teak wood (kiln seasoned) of size 4'0" x 0'9" tied together with Bamboo Rope having gap of 6" in between and engraved with required text and Colour as per the site requirements. The plank should be treated with anti-termite & should be Weather protected to the entire satisfaction of Engineer in Charge (NS).

16.72

14725

246210.36

... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red - Area of slab over 0.50 sqm (DSR no. 8.2.2.2)

7.21

4997

36032.84

... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (DSR No. 21.1.1.1)

42.01

481

20235.38

... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) (DSR no. 21.3.3)

8.08

1639

13250.31

... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

21.35

449

9604.72

... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mmthick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement

47.15

1364

64319.67

... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite / stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

3

952

2856.84

... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer in-charge: Profile B -Fixing with adjustable lugs with split end tail to each jamb (DSR No. 10.14.1.1)

340.84

567

193443.74

... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

30.89

2328

71913.46

... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality1.0 mm thick

61.77

873

53929.53

... More
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand)

87.05

8516

741337.82

... More
Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150 mm to 300 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to 18:2185(Part 3)in superstructure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately)

95.02

8108

770482.97

... More
Stoneworkin plain ashlar in superstructure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : Both face dressed Red sand stone

34.36

88830

3052200.17

... More
25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : Second class teak wood

26.66

4387

116963.02

... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete

32.63

2066

67426.96

... More
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Kiln seasoned and chemically treated hollock wood. 35 mm thick

15.01

3429

51479.5

... More
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).

21.35

103

2216.56

... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick shutters. with ISI marked M.S. pressed butt hinges bright finished of required size - Second class teak wood Kiln seasoned and chemically treated hollock wood 35 mm thick

30.89

2328

71913.46

... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick shutters. with ISI marked M.S. pressed butt hinges bright finished of required size - Second class teak wood Kiln seasoned and chemically treated hollock wood

15.01

4256

63895.77

... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm

7

210

1474.9

... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm

2

188

376.94

... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm

14

81

1142.82

... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 200x10 mm

14

67

945.42

... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150x10 mm

24

57

1388.16

... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 125 mm

44

38

1710.28

... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 100 mm

10

31

316.7

... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete Twin rubber stopper

22

70

1548.8

... More
25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places

3.98

2985

11884.24

... More
Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement , including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge.

14.63

677

9907.58

... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes (DSR no. 10.30.1)

11.36

1035

11767.82

... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR no. 4.2.5)

1.12

9059

10147.19

... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (DSR 12.50)

455.23999999999995

718

327185.54

... More
Providing and fixing 6mm thick polycarbonate multi wall sheet to be fixed on existing M.S. frame with Aluminum rivets complete in all respect to the entire satisfaction of Engineer-in-charge.

200.62

910

182634.42

... More
Providing and fixing top aluminium profile with rubber gasket to seal the joint of polycarbonate sheet with self drilling screws etc complete fixed in all respect and to the entire satisfaction of Engineer-in-charge.

120.34

315

37949.22

... More
Providing and fixing bottom aluminium profile with rubber gasket to seal the joint of polycarbonate sheet with self drilling screws etc complete fixed in all respect and to the entire satisfaction of Engineer-in-charge.

120.34

345

41535.35

... More
Providing and fixing 1500mmX140mmx19mm thick IPE wood decking planks, with eased edges and anti-slip grooves, fixed with SS 304 clips and screws over aluminium hollow box section 25x50x 1.65mm sub-frame grid laid @ 400mm c/c bothways. Aluminium pipes to be filled with soft wood battens of section 25mmx25mm for additional strength and screw holding. Grid supported on aluminium height riser pedestals adjustable 50-150mm for level and ventilation, fixed to RCC slab with anchor fasteners @ 600mm c/c. Gap 5-6mm between planks for drainage. All aluminium sections mill finish/6000 series alloy. Top surface finished with 2 coats of decking oil. Including cost of all materials, labour, T&P, wastage, etc complete in all respect to the entire satisfaction of Engineer- in -charge

114.76

8216

942868.16

... More
Providing and fixing 1500mmX140mmx19mm thick IPE wood planks , fixed over existing MS angle frame using SS 304 hex head nut-bolts 8mm dia x 50mm with SS washers and neoprene washers. Planks end sealed with wax sealer. Gap 5mm between planks for drainage. Top surface finished with 2 coats of UV resistant decking oil. Including cost of drilling, counter sinking, nut-bolting, wastage, labour, T&P, etc complete in all respect to the entire satisfaction of Engineer In Charge.

279.4

7265

2029841

... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :.Masonry work (first sort), in cement mortar 1:6 (1 cement : 6 coarse sand) (DSR 7.1.1)

205.23999999999998

7113

1460046.57

... More
Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR 7.2.1)

40.36

9025

364249.4

... More
Providing and laying 75 mm thick stone soling with hard stone aggregates 25-40mm size hand packed, with interstices filled with smaller stone chips (6-10 mm size), properly compacted with power road roller / plate vibrator compacter to required grade and camber on existing base of PCC, including spreading fine aggregates, watering and compaction, etc complete.

154.15

412

63509.8

... More
Providing and laying 20-25mm Kandla Grey natural stone flooring in required design and patterns, in linear , risers , skirting as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

149.61

3426

512578.82

... More
Brick edging 7 cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).

138.76

59

8215.98

... More
Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 1:4 (1 cement 1 : 4 coarse sand) (DSR 11.1.1)

1502.8799999999999

979

1472461.71

... More
Providing fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building.

204.01

684

139557.12

... More
Providing and fixing thermal insulation with Resin Bonded Fibre glass woolconforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrappedin 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge.

358.33

348

124992.67

... More
Providing and fixing 2400mm X146mmx 24mm thick WPC decking planks, with eased edges and anti-slip grooves, fixed with SS 304 clips and screws over aluminium hollow box section 25x50x 1.65mm sub-frame grid laid @ 400mm c/c bothways. Aluminium pipes to be filled with soft wood battens of section 25mmx25mm for additional strength and screw holding. Grid supported on aluminium height riser pedestals adjustable 50-150mm for level and ventilation, fixed to RCC slab with anchor fasteners @ 600mm c/c. Gap 5-6mm between planks for drainage. All aluminium sections mill finish/6000 series alloy. Including cost of all materials, labour, T&P, wastage, etc complete in all respect to the entire satisfaction of Engineer- in -charge

353.87000000000006

6143

2173823.41

... More
Providing and laying of gabion stone wall, edging, columns etc. crates of required Size with stone sizes 75-150mm thick hand packed tightly in wire crates made with 4mm dia GI wire conforming to IS: 280 & IS:4826 in 100mm x 100mm mesh (weaved diagonally, double twist at each inter section) including 10 percent extra for laps and joints complete in all resepect of MORT&H Specifications and to the entire satisfaction of the Engineer-in-charge. N.S.

364.11

6248

2275141.33

... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

471.37

1895

893552.54

... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete

87.51

2291

200495.91

... More
Providing and laying 1st quality ceramic glazed wall tiles of size 300x450 mm conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make, in all colours, shades as approved by Engineer-in-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand). The tiles are to be fixed by providing 2 mm thick spacer. The area of spacer is to be filled by using cement based grout of approved shade. The grooves are to be filled with cemenitious grout mix with proportion of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material complete in all respect and to entire statisfaction of Engineer-in-Charge.

417.51

1113

464897.39

... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

199.95

1639

327742.04

... More
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.

199.95

1657

331505.1

... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

6.71

367

2463.98

... More
Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe

2

128

256.58

... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.( DSR 12.22)

2

290

580.4

... More
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. (DSR 11.5)

294.71000000000004

1027

302852.84

... More
Extra for hiring of crane making , assembling the MS steel structure in their position

75

1200

90000

... More
Providing and fixing 2400mmX146mmx24mm thick WPC decking planks, fixed over existing MS angle frame using SS 304 hex head nut-bolts 8mm dia x 50mm with SS washers and neoprene washers. Planks end sealed with wax sealer. Gap 5mm between planks for drainage. . Including cost of drilling, counter sinking, nut-bolting, wastage, labour, T&P, etc complete in all respect to the entire satisfaction of Engineer In Charge.

824.48

5019

4138065.12

... More
Providing and fixing Synthetic Bamboo Thatch on existing GI sheet roof and joining the thatch properly with the existing roof with the help of Bamboo Ropes and Screws including Scaffolding, carriage and T & P in all respect to the entire satisfaction of Engineer In Charge (NS).

597.26

5093

3041845.18

... More
Providing and fixing Synthetic Bamboo Mats on existing GI sheet roof and joining the thatch properly with the existing roof with the help of Bamboo Ropes and Screws including Scaffolding, carriage and T & P in all respect to the entire satisfaction of Engineer In Charge (NS).

262.61

3296

865588.82

... More
Providing and fixing Synthetic Bamboo Panel Ceiling on existing Truss roof and screwing and installing the Ceiling properly with the existing truss with the help of necessary Screws, glue etc including Scaffolding, carriage and T & P in all respect to the entire satisfaction of Engineer In Charge (NS).

204.01

10014

2043058.15

... More
Providing, designing, fabricating, and installing FX Linearlux Wooden Grooved Acoustical Panel system or approved equivalent on wall and/or ceiling substrates, comprising 16mm thick high-density engineered wood panel (density 750–850 kg/m³) conforming to IS:12406 / EN 622-5, CNC-profiled with 4mm linear grooves at 28mm module (c/c) and finished in approved decorative laminates/veneers (Maple, Sea Beech, Ivory Coast, Classic Walnut, White Pine) with sealed edges and protective coating. Panels shall be acoustically optimized with 10mm dia rear perforations in calibrated pattern to achieve system NRC ≥0.78 (ASTM C423 / ISO 354) under installed conditions with specified backing. Fixing shall be executed over corrosion-resistant extruded aluminium sub-framing using concealed clip-in arrangement or direct mechanical fastening onto prepared substrate, ensuring tolerance-controlled alignment, modular continuity, and allowance for dimensional movement. Providing and fixing acoustical insulation comprising 50mm thick resin-bonded mineral wool/glass wool insulation of minimum 50 kg/m³ density in black finish/shade, conforming to relevant IS/ASTM standards for thermal and acoustic performance. Insulation shall be securely installed within a framework made of G.I. sections of approved size and gauge, duly suspended/fixed as per approved drawings and site requirements. The insulation shall be properly cut, fitted, and mechanically retained without sagging, gaps, or displacement, ensuring continuous acoustic coverage and enhanced sound absorption performance. The scope shall include all necessary G.I. framework members, supports, cleats, fasteners, anchors, and accessories required for complete installation, finished true to line, level, and plumb as directed by the Engineer-in-Charge.

204.01

5246

1070316.02

... More
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works.

8.31

65

544.97

... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work (DSR no. 13.61.1)

4267.07

151

647271.85

... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work (DSR 13.52.1)

123.07

235

28948.53

... More
Providing and laying 40-50mm thick random rubble flat stone flooring/walling in random pattern, stone dressed on top + sides, laid evenly on 25mm thick cement mortar bed 1:4, joint 8-12mm wide filled with 2-part epoxy resin grout, including cutting, cleaning, curing, finishing, complete as per IS 3316 & direction of Engineer-in-charge.

81.13

2380

193089.4

... More
Providing and laying antiskid vitrified floor tiles of size 600 x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade. The tiles are to be laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand). The tiles are to be fixed with 2 mm grove using spacers. The grove are to be filled with cementitious grout mix with proportion of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material complete in all respect and to entire statisfaction of Engineer in Charge.

53.07

1229

65228.34

... More
Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR no. 6.32.1)

69.82

9081

634066.84

... More
Half brick masonry with non modular fly ash bricks of class designation 10, conforming to IS :12894, in super structure above plinth upto floor V level. Cement mortar 1 : 3 (1 cement : 3 coarse sand) (DSR No. 6.45.1)

52.41

1101

57751.63

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4(1 cement :4 coarse sand) DSR 6.1.1

101.48

7171

727778.03

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)

162.49

6939

1127628.6

... More
12 mm cement plaster of mix: 1:6(1 cement: 6 fine sand)

558.37

337

188550.38

... More
15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand)

357.52

384

137530.79

... More
6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand)

199.95

292

58453.38

... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

357.52

166

59519.93

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

1115.84

151

169429.15

... More
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

9.75

1963

19140.42

... More
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre

1115.84

180

201565.34

... More
Providing and applying of CNC Laser cut on a Mild Steel Plate of thickness 3mm into required shape of animal and tree as required as per the entire satisfaction of Engineer in charge.

15.26

5700

86982

... More
Supply Installation Testing & commissioning of 533 mmc/c Fire Retardant fabric upholstered chair conforming to BIFMA standards. The chair to have MS tubular framework welded together with continous arc welding. The chair shall have powder coating of 65microns on all of the MS tubular framework . The seat shall have Polyurethane foam of density 55+3 KG/Cum & Back to have density of 50+3 Kg/CuM. The height of the back to be 950-1000mm from the ground to top of back & for Seat to be 400-450mm from the ground . The rear of back shell & bottom of seat shell to be Polypropylene plastic in black colour Polypropylene plastic cover. The wooden armrest to be of 80mm & 400mm length with melamie polished in black colour . The armrest between two chairs in a row to be shared & at the both ends to be individual. Including cost of suitable chemical expnasion fastners as required of Hilti/Fischer make. Make Penworkers/ Featherlite /Godrej.

102

13136

1339872

... More
PUBLIC HEALTH WORK

-

-

-

... More
Carriage of material by mechanical transport including loading, unloading and stacking.

-

-

-

... More
Earth upto 1 Km.

80.37

211

17012.72

... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.

-

-

-

... More
All kinds of soil

121.83

172

21041.26

... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

-

-

-

... More
All kinds of soil.

119.12

253

30169.52

... More
Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

-

-

-

... More
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

1776.2

342

608597.17

... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

41.46

190

7906.84

... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.

-

-

-

... More
All kinds of soil

100.97

123

12457.68

... More
CONCRETE WORK

-

-

-

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level.

-

-

-

... More
1:2:4 (1 cement : 2 coarse sand (zone-III) derived fromnatural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

7.54

7665

57799.98

... More
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived fromnatural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

17.28

6628

114533.22

... More
1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

5.08

6342

32220.41

... More
Providing & applying a coat of residual petroleum bitumen of gradeof VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

27.87

142

3963.11

... More
REINFORCED CEMENT CONCRETE

-

-

-

... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level

-

-

-

... More
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

31.95

8801

281208.24

... More
Centering and shuttering including shuttering, propping etc. and removal of form to:-

-

-

-

... More
Foundations, footings, bases of columns, etc. for mass concrete

10.22

381

3899.54

... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

109.25

819

89557.69

... More
Suspended floors, roofs, landings, balconies and access platform

44.57

902

40211.5

... More
Edges of Slab and breaks in slab and floor

-

-

-

... More
Unde 20 cm wide

202.42

202

41075.07

... More
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.

-

-

-

... More
Cold twisted bars

3282.4

104

344455.06

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

-

-

-

... More
Cement mortar 1:4 (1 cement : 4 coarse sand)

39.82

7171

285574.7

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

-

-

-

... More
Cement mortar 1:6 (1 cement : 6 coarse sand)

44.27

8860

392236.18

... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

-

-

-

... More
300 mm x 600 mm

50.17

1233

61895.73

... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

250

114

28545

... More
Steel work welded in built up ections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using tructural steel etc. as required.

-

-

-

... More
In gratings, frames, guard bar, ladder, railings, brackets,gates and similar works

100

167

16794

... More
Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete.

45

8363

376338.6

... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4(1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

33.44

1066

35678.47

... More
12 mm cement plaster of mix :

-

-

-

... More
1:6 (1 cement : 6 fine sand)

22.51

324

7301.12

... More
12 mm cement plaster finished with a floating coat of neat cement of mix :

-

-

-

... More
1:4 (1 cement: 4 fine sand)

17

414

7039.02

... More
Cement plaster (1:3) finished with a floating coat of neat cement.

-

-

-

... More
12 mm Cement Plaster

128.89

437

56377.77

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

-

-

-

... More
Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

9.9

220

2179.39

... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

-

-

-

... More
W.C. pan with ISI marked white solid plastic seat and lid

6

7790

46742.52

... More
Providing and fixing white vitreous china water closet squatting pan (Indian type) :

-

-

-

... More
Orissa pattern W.C. pan of size 580x440 mm

3

3083

9250.47

... More
Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge

13

339

4416.36

... More
Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.

-

-

-

... More
10 litre (full flush) capacity-white

3

2183

6549.51

... More
Providing and fixing soil, waste and vent pipes

-

-

-

... More
100 mm dia

-

-

-

... More
Centrifugal Sand cast iron S&S pipe as per iS : 3989

172.5

1148

198180.07

... More
75 mm dia

-

-

-

... More
Centrifugal Sand cast iron S&S pipe as per iS : 3989

90

1153

103858.2

... More
Providing and fixing heel rest sanitary bend

-

-

-

... More
100 mm dia

13

533

6940.57

... More
Providing and fixing collar :

-

-

-

... More
100 mm dia

-

-

-

... More
Sand cast iron S&S as per IS - 3989

17

499

8487.93

... More
75 mm dia

-

-

-

... More
Sand cast iron S&S as per IS - 3989

31

352

10920.37

... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.

-

-

-

... More
15 mm dia. nominal bore

105

356

37433.55

... More
20 mm dia. nominal bore

205

425

87225.45

... More
25 mm dia. nominal bore

130

536

69784

... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.

-

-

-

... More
25 mm dia nominal bore

85.65

455

38981.03

... More
32 mm dia nominal bore

395.33

525

207828.93

... More
40 mm dia nominal bore

179.83

600

107968.13

... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

-

-

-

... More
20mm nominal bore

13

525

6829.81

... More
25 mm nominal bore

13

605

7872.8

... More
32 mm nominal bore.

5

670

3354.9

... More
40 mm nominal bore

3

803

2411.4

... More
65 mm nominal bore

3

1695

5085.33

... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

-

-

-

... More
20mm nominal bore

6

450

2700.06

... More
25mm nominal bore

2

451

903.04

... More
Providing and fixing uplasticised PVC connection pipe with brass unions

-

-

-

... More
15 mm nominal bore

32

82

2646.72

... More
Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 :

-

-

-

... More
Up to 300 mm dia

4

8672

34689.96

... More
Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints :

-

-

-

... More
100 mm diameter pipe

-

-

-

... More
For Sluice Valves and Other specials

20

323

6460.8

... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :

-

-

-

... More
100 mm diameter

-

-

-

... More
Class II

5

4851

24256.15

... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :

-

-

-

... More
15mm nominal bore

26

309

8053.5

... More
20mm nominal bore

26

337

8773.44

... More
25m nominal bore

8

427

3419.12

... More
65 mm nominal bore

3

1106

3318.33

... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

17000

10

181900

... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 DSR 18.49

-

-

-

... More
15 mm nominal bore DSR 18.49.1

18

493

8876.16

... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 DSR 18.53

-

-

-

... More
15 mm nominal bore DSR 18.53.1

45

558

25145.55

... More
Providing and fixing of Extension nippple upto 1-1/2" length

62

72

4512.36

... More
Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523 :

-

-

-

... More
Up to 600 mm dia

2

19469

38938.88

... More
Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket :

-

-

-

... More
100 mm dia pipes

105

116

12203.1

... More
Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 :

-

-

-

... More
100 mm dia Ductile Iron Class K-7 pipes

527.3

1223

645330.83

... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :

-

-

-

... More
150 mm diameter S.W. pipe

150

1147

172198.5

... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :

-

-

-

... More
150 mm diameter S.W. pipe

513

723

370919.52

... More
200 mm diameter S.W. pipe

171

849

145336.32

... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

-

-

-

... More
100x100 mm size P type

-

-

-

... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

23

2634

60594.42

... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

-

-

-

... More
250 mm dia. R.C.C. pipe

152.4

875

133427.72

... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality

-

-

-

... More
HD - 20

-

-

-

... More
Circular shape 560 mm internal diameter

15

1630

24456.9

... More
MD - 10

-

-

-

... More
Square shape 450 mm internal dimension

16

1349

21585.76

-

-

-

... More
Supplying & installing following sizes of perforated Hot Dipped Galavanised Iron cable tray (Galavnisation thickness not less than 50 microns) with perfoaration more than 17.5 % in convenient sections, joined with connectors, suspended from ceiling with GI suspenderes including GI Bolts & nuts etc. as required

-

-

-

... More
50mm(H) x 300mm(W) x 50 mm(H) and 1.5 mm Thick

12

1062

12744

... More
50mm(H) x 150mm(W) x 50 mm.(H) and 1.5 mm Thick

12

803

9636

... More
Supplying & installing following sizes of perforated Hot Dipped Galavanised Iron cable tray "bends" (Galavnisation thickness not less than 50 microns) with perfoaration more than 17.5 % in convenient sections, joined with connectors, suspended from ceiling with GI suspenderes including GI Bolts & nuts etc. as required

-

-

-

... More
50mm(H) x 300mm(W) x 50 mm(H) and 1.5 mm Thick

2

1977

3954

... More
50mm(H) x 150mm(W) x 50 mm.(H) and 1.5 mm Thick

2

1368

2736

... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/submain wiring/cable as required

75

50

3750

... More
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)

-

-

-

... More
Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520

-

-

-

... More
Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.

-

-

-

... More
M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.

-

-

-

... More
Suitable cement concrete foundation duly plastered and with anti vibration pads.

-

-

-

... More
450 lpm at 35 m Head

2

91384

182768

... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

-

-

-

... More
25 mm dia

30

920

27600

... More
40 mm dia

60

1259

75540

... More
50 mm dia

25

1557

38925

... More
65 mm dia

3

1955

5865

... More
80 mm dia

3

2277

6831

... More
100 mm dia

30

3077

92310

... More
Supplying and fixing single headed internal hydrant valve with instantaneous Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank cap and chain as required :

-

-

-

... More
Single headed Stainless steel

3

6632

19896

... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

-

-

-

... More
80 mm dia

3

5406

16218

... More
100mm dia

4

7271

29084

... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :

-

-

-

... More
Stainless Steel (Grade 304)

6

4667

28002

... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.

-

-

-

... More
20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585

-

-

-

... More
20 mm nominal internal dia gun metal globe valve & nozzle.

-

-

-

... More
Drum and brackets for fixing the equipmets on wall.

-

-

-

... More
Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

-

-

-

3

9440

28320

... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :

-

-

-

... More
Stainless Steel (Grade 304)

3

3402

10206

... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :

-

-

-

... More
2 way-100 mm dia M.S. Pipe

1

7262

7262

... More
Supplying and fixing air vessel made of 250mm dia, 8mm thick MS sheet, 1200mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required

1

19402

19402

... More
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 °C with required accessories :

-

-

-

... More
Pendent Sprinkler

30

599

17970

... More
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.

-

-

-

... More
1000 mm

30

1703

51090

... More
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

2

1670

3340

... More
DUCTING, GRILLS,DIFFUSER AND INSULATION

-

-

-

... More
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, Splitler dampers,vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required and shall also confirm to the BIS specifications.

-

-

-

... More
0.63 mm (24 gauge) GSS

120

1191

142920

... More
0.80 mm (22 gauge) GSS

40

1382

55280

... More
Supplying, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/ round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, bends, transitions, reducers, end caps,collars etc as required complete in all respect in confirmation with IS : 655 and approved drawings and specifications of following sheet thickness complete as required.

-

-

-

... More
0.80 mm (22 gauge) GSS

50

1415

70750

... More
Supply, installation, testing and commissioning of Motorized (ON-OFF Type) duct mounted GI volume control damper with enthalpy sensor and necessary control wire for integration within AHU room complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc in confirmation to SMACNA/IS and as per specifications complete etc. as required.

-

-

-

... More
Fire damper

2

18377

36754

... More
Actuator

4

9793

39172

... More
Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications

1

9623

9623

... More
Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required

1.6

6285

10056

... More
Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.

4

12841

51364

... More
Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.

6

8595

51570

... More
Supplying and fixing of following thickness duly laminated aluminium foil of mat finish closed cell Nitrile rubber ( Class "O" ) insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints should be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.

-

-

-

250

810

202500

... More
Supplying, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :

-

-

-

... More
12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm

48

487

23376

... More
28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm

48

1157

55536

... More
Providing and fixing of Openable MS Cover for UGR with locking arrangement and frame made from MS Angle and Sheet, duly painted with two coats over primer complete to the satisfaction of EIC

60

120

7200

... More
Supplying, lowering, testing and commissioning of Openwell Submersible Pump 10 HP of approved make complete.

2

64104

128208

... More
Manufacturing, Supplying, Testing, Commissioning of Electrical Control Panel suitable for operation of 2 no's Submersible Pump Single or Both, independently at a time, complete with Voltmeter, Ammeter, Selector Switch, Indicator, MCB, Starter to the satisfaction of EIC

2

15045

30090

... More
Supplying, fixing, testing and commissioning of CI , Swing Type, Non Return Valve of size 100 mm of approved make complete.

2

10042

20084

... More
Supplying and laying of UPVC Pipe for Underground drainage and Sewerage, IS - 1538 approved make, complete with cost of solvent to the satisfaction of EIC

-

-

-

... More
110 mm Nominal Dia

544

551

299744

... More
160 mm Nominal Dia

513

1171

600723

... More
200 mm Nominal Dia

171

1847

315837

... More
Providing and fixing of Chinaware One piece EWC with slim soft close seat cover make CERA model Campbell or equivalent Model of any other approved make to the satisfaction of EIC

3

11453

34359

... More
Providing and fixing of Chinaware Two Piece Wall Hung Extended EWC Cistern with Twin flush fittings Campbell with slim soft close seat cover or equivalent Model of any other approved make to the satisfaction of EIC

4

19537

78148

... More
Providing and fixing of white vitreous chinaware urinal partitions of size 90x320x720 mm complete in all respect Make M-cera S4090101

4

3010

12040

... More
Providing and fixing of Chinaware Urinal of size 375 x 390 x 590 mm , CERA Capriana of equivalent model of other approved make.

7

6977

48839

... More
Providing and Fixing Chinaware Basin of following type / Make / Model or equivalent model of other approved makes Jaquar / Hindware / Kerovit

-

-

-

... More
Counter Top Basin Make CERA Model Clair

12

3904

46848

... More
Table Top Make CERA model CAFÉ

3

5893

17679

... More
Wall Hung with half pedestal Make CERA Model Clair

4

4272

17088

... More
Providing and fixing of Pressmatic Pillar Cock for Basin complete in all respect of make Jaquar / CERA / Hindware / Kerovit

18

3556

64008

... More
Providing and fixing of Self closing angle cock pressmatic for urinal with wall flange and 200 mm connecting pipe and spreader complete of approve make and model

7

3156

22092

... More
Providing and fixing of Spout as per approved design for water spouts

6

2590

15540

... More
Providing and fixing of looking glass mirror 5mm thick of approved make with PVC beading 1-1/4" x 3/4" with plastic Hard Board duly fixed on wall with screw/nuts/clips/rod plug

9.75

1802

17569.5

... More
Providing and fixing Mild Steel Grab Bar capable of moving to different position sitting to standing make Viking Model 56631 or equivalent

4

6746

26984

... More
Providing and fixing 32" dia ABS Grab Bar 24" long make Viking Model 56597 or equivalent

8

1039

8312

... More
Providing and fixing of Liquid Lotion Dispenser ( Wall Mounted ) of make Viking or equivalent to the satisfaction of EIC

-

-

-

... More
Capacity 200 ml

4

1231

4924

... More
Capacity 500 ml

12

1793

21516

... More
Supplying and Installation of 400 Ltrs Capacity Drinking Water Cooler having (+10%) following specification, full body stainless steel SS 304, ISI marked of approved make

2

124888

249776

... More
Storage Capacity: 400 Ltrs

-

-

-

... More
Cooling Capacity: 150 LPH

-

-

-

... More
Tank Material: SS 304, Body SS

-

-

-

... More
BIS Approval IS 1475

-

-

-

... More
Make Blue Star/Voltas/Climatrol approved by BIS

-

-

-

... More
Supplying & Fixing of Water Purifier with 3 Stage Purification system consisting of sediment filter, Activated Carbon Filter and Ultravoilet treatment having purification capacity of 200 LPH, water control sensor for automatic control of purifier as per level of water cooler and valve for back flushing of sediment filter complete of make Aquaguard to the satisfaction of EIC

2

19664

39328

... More
Supplying & Fixing of Voltage Stablizer with MCB, Voltmeter, Ampere Meter Copper Wound complete of approved make capacity 4 KVA

2

4990

9980

... More
Providing and fixing of HCI P.Trap complete in all respect

-

-

-

... More
100 mm

5

925

4625

31

700

21700

... More
Providing and fixing of G.I Tank Nipple complete in all respect

-

-

-

5

285

1425

14

170

2380

... More
Providing and fixing polished CP/SS P-Trap/Bottle Trap for Wash Basin complete of approved make to the satisfaction of EIC

18

2066

37188

... More
Providing and fixing of C.P. Steel Grating Heavy (With / without hole) size 4" i/d of approved make.

41

54

2214

... More
Providing and fixing of Drip Seal Joint to CI Pipes and Specials

-

-

-

... More
100 mm

100

140

14000

50

114

5700

... More
For Control of Terrace Pumps

-

-

-

... More
HOSE CABINET FOR 15 MTR. LONG HOSE REEL PIPE & BRANCH PIPE ETC.

-

-

-

... More
Providing and fixing of HOSE CABINET of Size: (600mm x 600mm x 450mm) made of 16 gauge MS sheet with 4mmthick glazed glass door i/c necessary locking arrangement suitable to accommodate 15 mtr. long hose reel pipe & branch pipe mounted on wall or raised bric platform & duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect as required of approved make.

3

4670

14010

... More
Supplying and fixing MS chequred Plate 5mm thick inclduing cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete in all respects

594

116

68904

... More
Fabrication, Supply, Installation, Testing and Commissioning of Electrical Control Panel of cubical construction, Floor/Wall Mounted type, Fabricated out of 2 mm thick CRCA Sheet, compartmentalized with hinged lockable door, dust and vermin proof, powder coated of approved shade , interconnection with suitable size copper condutor cable,having switchgears and accessories mountings and internal wiring, earth terminals, complete in all respect, suitable for Terrace Pump of 7.5 HP Capacity, complete as per CPWD specifications with the following Incoming/outgoings suitable for operation on 415 V / 3 Phase, 50 Hz Supply with enclosures protection.

1

45436

45436

... More
4 Pole MCB/TPN 40 Ampere Voltmeter with Selector Switch Ammeter with Selector Switch & CTs etc LED Type RYB Phase Indicating lamps, ON/OFF, Trip Indicating Lamps

-

-

-

... More
Starter suitable for 7.5 HP Pump with overload protection, Single phase preventor, complete with all accessories Internal wiring required and Sensor for automatic operation Selector Switch for auto/manual/off operation

-

-

-

... More
Supplying, installing, testing and commissioning of Copper Conductor Cables, XLPE Insulated, unarmoured IS 7098 (Part 1) marked of approved make Havells, Finolex, Polycab to the satisfaction of EIC

-

-

-

... More
2C x 1.5 Sqmm

25

118

2950

... More
3C x 2.5 Sqmm

25

238

5950

... More
4C x 4 Sqmm

15

439

6585

... More
From Mains to Electrical Panel

-

-

-

... More
Supplying, installing, testing and commissioning of C.I. Dual Plate Wafer type Non-return Valves PN 16 with SS 304 discs with Nitrile rubber lining as per with required flanges, nuts, bolts and gaskets etc. complete.

-

-

-

... More
100mm dia.

3

9168

27504

... More
Providing and fixing of G.I. tank Nipple Complete in all respect

-

-

-

... More
25 mm dia nominal bore

2

285

570

... More
65 mm dia nominal bore

4

1385

5540

... More
Supply, Installtion, Testing and Commissioning of Air Cooled Ducted split type air conditioning units with Scroll comperessors and first charge of refrigerant R410A or equivalent permitted green refrigerant, Cooling Coil of Copper with aluminium fins complete of approved make, to the satisfaction of EIC. The rates quoted should include lifting, shifting and positioning of Indoor and Outdoor unit as per site requirements, making hanging arrangement for Indoor Units and hanging arrangement/foundation for outdoor units. The units should be factory charged, however any top up required, Nitrogen leak testing, Oil Charging, Vacuumization, Canvass Connections should also be included in the rates quoted. Make Daikin, Voltas, Bluestar, Carrier, Toshiba

-

-

-

... More
8.5 TR (+/- 5%)

4

339291

1357164

... More
Providing and fixing of UPVC Pipe of Class 5 (10KG/CM2) of various sizes for condensed water drainage from Indoor unit to nearest disposal point as per site to the entire satisfaction of EIC.

-

-

-

... More
All necessary ,Supports ,civil works like cutting & chasing of walls/floor/ glass etc. and make them good thereof should be included in the rates quoted.

-

-

-

... More
40 mm dia with 6mm Class O Nitrile Insulation

40

127

5080

... More
32 mm dia with 6mm Class O Nitrile Insulation

80

83

6640

... More
Providing and fixing of LT Control Cable Copper, XLPE Insulated PVC Shielded unarmoured complete in all respect.

-

-

-

... More
4 core x 16 sqmm Aluminium Armoured

30

3010

90300

... More
4.0 core x 6 sqmm Copper Armoured

40

1215

48600

... More
4 core x 2.5 sqmm copper flexible

60

546

32760

... More
4 Core x 1.5 sqmm

60

340

20400

... More
Main Electrical Panel-1 (CPRI Approved) 

-

-

-

... More
Design,Supply,Installation,Testing and Commissioning Electrical Main Panel weather Proof outdoor Type Powder Coated Made out of TATA/SAIL/ESSAR/JINDAL/Reputed make sheet having thickness 2.0 mm for load bearing surfaces & 1.6 mm Non bearing surfaces duly processsed powder coated having Siemens grey colour or as approved by client or department (Outdoor Type with weatherproof canopy design)as per following specifications complete in all respect .

1

234773

234773

... More
INCOMING SUPPLY

-

-

-

... More
100-160Amps ,3Pole MCCB,36 KA with Microprocessor release.The MCCB shall be double break & the ICS=100% ICU = 1nos 

-

-

-

... More
Spreader Link with phase Barriers = 4sets

-

-

-

... More
Rotary Mechanism = 1nos 

-

-

-

... More
Metering Section

-

-

-

... More
Load Manager EM6400NG with RS485 Port or  Equivalent (Class 1.0, with RS485 Port, with Paramenters V, Amp, PF, % THD, F,W,WH,VA,VAH, VAR,VARH, Runhrs, ON hrs, Interupts = 1No.

-

-

-

... More
Control MCB SP C Curve= 3nos

-

-

-

... More
CT's 200/5 = 3nos

-

-

-

... More
Indication Lamps LED Type RYB = 3nos

-

-

-

... More
Outgoing Feeders - (4 Nos + 1 Spare )

-

-

-

... More
MCB TPN32- 40 Amps C Curve 10 KA -5nos

-

-

-

... More
ELCB 32-40 Amps 300 MA 4 Pole -5 Nos or as Required by OEM

-

-

-

... More
Outgoing Feeders - (4Nos + 1 Spare )

-

-

-

... More
MCB TPN 16 Amps or as per IDU rating C Curve 10 KA -5nos

-

-

-

... More
Multi function Meter EM 64xx 1.0 RS or equavalent for EMS/BMS compatibilty - 5 nos

-

-

-

... More
INDICATING LAMPS LED Type

-

-

-

... More
Control MCB SP C Curve for control

-

-

-

... More
CT's 30/5

-

-

-

-

-

-

... More
Fabrication of Powder Coated Enclosure made out of approved/reputed make CRCA sheet having 2 mm for load bearing surfaces & 1.6 mm for non load bearing surfaces ,duly processsed powder coated having Siemens grey colour. (Outdoor Type with weatherproof canopy design)

-

-

-

... More
Assembly charges of Aluminium Bus Bar 250A TPN Electrolite grade E91 having Suitable cross section Phase & Neutral  & Current carring capacity 1 A/Sq. mm2. inclusive of Insulators, colour coded Heat shrinkable Insulation sleeve (RYBN)

-

-

-

... More
Assembly of Hardware (PVC Channels/MCB Channels/Fibre-Glass/Gaskits/nuts/Bolts/washers/ Terminal blocks, etc)

-

-

-

... More
Complete Wiring inclusive of control wiring, power wiring, Aluminium Solid connections/interconnections including insulators, thimbles,etc

-

-

-

... More
Unloading at site, placement of Panel on the foundation, co-ordination during execution, rendering necessary guidance for execution, supervision, testing, commissioning and startup of above mentioned Panel.

-

-

-

... More
AMC FOR 03 YEARS AFTER DEFECT LIABILITY PERIOD OF 24 MONTHS (02 YEARS) FROM THE DATE OF HANDING OVER THE SYSTEM.

-

-

-

... More
Comprehesive Maintenance charges for Air Conditioning system including (routine and preventive maintenance with parts including consumables such as gas, oil, filters) and break down maintenance of high & low side of the air conditioning system comprising of all the machinery during FIVE years after expiry of Two year defect liablity period.

-

-

-

... More
Maintainence

-

-

-

... More
3rd year (1.5 % of Capital Cost)

1

38662

38662

... More
4th year (add 10% on 3rd Year maintenance cost i.e. 40,517/-)

1

42528

42528

... More
5th year (add 10% on 4rt Year maintenance cost i.e. 44,569/-)

1

46781

46781

... More
ELECTRICAL WORK

-

-

-

... More
SCHEDULE-A (ELECTRICAL INSTALLATION)

-

-

-

... More
DSR item No.1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

-

-

-

... More
Group C

121

1704

206184

... More
DSR item No.1.17 Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

-

-

-

... More
3 x 1.5 sq.mm

800

104

83200

... More
3 x 2.5 sq.mm

500

148

74000

... More
3 x 4 sq. mm

60

222

13320

... More
DSR item No.1.18 Supplying and drawing following pair 0.5 mm dia FRLS/HFFR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

-

-

-

... More
2 Pair

50

39

1950

... More
DSR 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

-

-

-

1200

168

201600

... More
DSR item No.1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

-

-

-

... More
Telephone Socket

2

168

336

... More
DSR 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

14

402

5628

... More
DSR 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

20

47

940

... More
DSR 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

-

-

-

... More
1 or 2 Module (75 mm x 75 mm)

2

354

708

... More
DSR 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

15

545

8175

... More
DSR item No.1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

19

659

12521

... More
DSR 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

15

104

1560

... More
DSR 1.38 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

4

112

448

... More
DSR item No.2.2 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required.

-

-

-

... More
100 A,30KA,FPMCCB

10

8127

81270

... More
125 A,36KA,FPMCCB

1

8644

8644

... More
200 A,36KA,FPMCCB

1

15956

15956

... More
DSR Item No. 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without (MCB/RCCB/Isolator)

-

-

-

... More
4 way (4 + 12), Double door

8

4377

35016

... More
6 way (4 + 18), Double door

1

5299

5299

... More
DSR Item No.2.5 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required).

-

-

-

... More
8 way (4 + 24), Double door

3

10724

32172

... More
DSR 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

-

-

-

... More
Single pole

169

285

48165

... More
Triple Pole

3

1070

3210

... More
Triple pole and neutral

15

1301

19515

... More
DSR item No.1.57 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

3

807

2421

... More
DSR 2.24 Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required.

-

-

-

... More
For 4 way, Double door TPN MCBDB

8

1177

9416

... More
DSR item No.2.25 Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required

3

1271

3813

... More
DSR 5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

26

7658

199108

... More
DSR item No.5.12 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

300

313

93900

... More
DSR 11.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

-

-

-

... More
4 X 16 sq. mm (28mm)

16

366

5856

... More
3 ½ x 35 Sq mm ( 32 mm)

6

437

2622

... More
3 ½ x 120 Sq mm ( 45 mm)

2

710

1420

... More
DSR item No.15.16 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

-

-

-

... More
63 mm dia (OD-63 mm & ID-51 mm nominal)

1700

289

491300

... More
90 mm dia (OD-90 mm & ID-76 mm nominal)

280

336

94080

... More
Civil DSR 10.18 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

14

215

3010

... More
DSR item No.8.7 LED Panel light 2x2 ft. (System lumen efficacy ≥120 <135 lm/Watt) (Recessed/ Surface type)

-

-

-

... More
Supplying, Installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5°C to 40°C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) <19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K

-

-

-

... More
(As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C)

-

-

-

... More
Powder Coated CRCA Sheet Body (Thickness > 0.50 mm)

-

-

-

... More
36 watt

11

2225

24475

... More
DSR item No.8.1 LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt )

-

-

-

... More
Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5°C to 40°C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI > 80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K /4000°K / 5700°K / 6500°K

-

-

-

... More
(As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C)

-

-

-

... More
Powder coated die cast /Extruded aluminium Body including trim

-

-

-

... More
22 watt

67

942

63114

... More
DSR item No.8.9 LED Batten light (System lumen efficacy ≥105 <120 lm/Watt).

-

-

-

... More
Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5°C to 40°C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20, CRI > 80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K

-

-

-

... More
(As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).

-

-

-

... More
Powder Coated CRCA Sheet Body (Thickness ≥ 0.50 mm)

-

-

-

... More
24- 26 Watt

7

639

4473

... More
DSR item No.8.16 LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥120 and <135 lm/Watt).

-

-

-

... More
Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5°C to 50°C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI > 70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement, suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K

-

-

-

... More
(As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 and <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).

-

-

-

... More
100 watt

8

2467

19736

... More
DSR item No.9.2 Brush Less Direct Current (BLDC) Fan without Remote

-

-

-

... More
Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al bodyPower Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req.

-

-

-

... More
1400mm, service value ≥ 6.0 CM/Min/Watt, air delivery 245 CM/Min (Minimum)

14

2737

38318

... More
Supply and fixing of 12 modules (200 mm x 150 mm) G.I box suitable for accommodate the following accessories along with modular base and cover plate for modular switches in recess/ surface etc as required for Computer Point with 4 Nos. 5/6 Amp. modular switch and 4 Nos. 3 pin 5/6 Amp. modular socket outlet. The job includes the cost of making interconnections with suitable copper wire, painting of box with approved paint and other petty material required to complete the job to the entire satisfaction of Engineer-in-Charge at site. The Modular accessories should be of Lauritz Knudsen (Entice) / ABB (Ivie) / Legrand (Myrius) / Crabtree (Athena)/ Norisys (Square series) make only.

7

1300

9100

... More
Supply & erection of Exhaust Fan (heavy duty motor with copper wound metallic body) following size complete with motor, metallic blades, double ball bearing with minimum power consumption, rigid frame with rubber mounting for silent operation, epoxy powder coating along with metallic louver to be installed in the existing opening including cost of making the hole to suit the size of above fan making good the damage, Carriage Charges connection, testing, commissioning etc. as required to complete the job to the entire satisfaction of Engineer-in-charge.

-

-

-

... More
Size 12 inch (300mm) Sweep, 900 RPM Heavy Duty Exhaust fan (Single Phase) with louver of Havells (Turbo Force SP) / Orient (Industrial Heavy Duty)/ Usha (Turbo HDEF)/ Crompton (EXHD300-6-1)/ Bajaj (Supreme Plus) make only.

15

4650

69750

... More
Supply & fixing of OEM made Junction box IP-66/67 made out of Polycarbonate with Glass fiber reinforced of size 210x155x90 (minimum) with 5 nos. OEM made connectors/ terminal blocks. The Jn. Box and connectors/ terminal blocks should be supplied by OEM. The terminal blocks/ connectors should be of Hensel/ Wago/ Elmax/ Siemens make only and junction box shall be of Hensel make KF-1616 G or its equivalent Clipsal/ Legrand/ Rittal/ Schneider/ ABB make only. The Junction box shall be fire retardant and self-extinguishing. The gasket material shall be polyurethane and the gasket shall be internally embedded. The job includes the cost of cable glands for cable entry, mounting kit for pipe and post installation, fixing screw, all labour and petty material required to complete the job to the entire satisfaction of the Engineer in Charge of work.

2

2850

5700

... More
S/E of angle iron bracket rectangle shape (1 mtr. x 0.6 mtr.) made out of 50mm x 50mm x 5mm with 4" dia 45 cm long GI pipe medium class canopy suitable for installation of 4 nos. LED flood lights. The bracket shall be welded to GI pipe canopy at the top of the pole. The bracket shall be provided with suitable size. nut/bolts crossed through out the pole & the bracket complete with washer etc. The angle iron shall have at least 3 nos. holes for erection and adjustment of flood lights. The bracket shall be painted with red oxide and then aluminium paint as required at site. The job includes making holes in pole and bracket at site as per the requirement. The job includes the cost of installation of angle iron bracket with canopy on existing pole upto 9 mtr. height with help of hydraulic ladder / Crain with bucket which shall be arranged by the firm at his own cost. The sample of the bracket is to be got approved at Workshop prior to carriage to site of installation to complete the job to the entire satisfaction of Engineer-in-charge. The GI pipe should be medium class ISI marked of Hindustan / Jindal / Tata / Sail/ Zenith only.

2

2570

5140

... More
Supply & erection of Wall Fan 400mm sweep oscillating type complete with blades with regulator. The fan should be of Havells (Swing)/ Usha (MAXX AIR)/ Orient (400mm Wall44)/ Crompton (WM Hiflo wave Plus)/ Bajaj (Esteem Double String) make only. The wall fan should be provided with double string i.e. one no. controlling oscillating and one for speed. The cost including connection with adjacent light points.

3

2930

8790

... More
Supply and laying of XLPE insulated PVC sheathed Aluminum conductor armoured cable of 1.1 KV grade as per IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid in existing Trench/Ducts/Cable Tray/ RCC/ HUME/ METAL/ DWC pipe / on surface with the help of MS clamps of suitable size/ as required at site to the entire satisfaction of Engineer-in-Charge. The job includes labour charges of laying the cable and making connections with suitable size aluminum lugs/thimbles etc. The cable shall be of Polycab / Havells / R.R. Kabel/ KEI/ Finolex make only.

-

-

-

... More
16 sq.mm 4 core In pipe

1320

352

464640

... More
35 sq.mm 3.5 core in pipe

600

532

319200

... More
120 sq.mm 3.5 core In pipe

300

1550

465000

... More
Supply and erection of 14 GMS sheet frame of suitable size for erection of 12”/15”/18” sweep exhaust fan. The holder should be suitable for 12”/15”/18” sweep exhaust fan shall be cut from the centre of the sheet and bedding ¼” round collar with round cut and duly fixed with existing ventilator frame with suitable arrangement after removing the existing glass. The exhaust fan frame shall be painted on both side with superior quality paint after one coat of primer. The job includes the cost of M.S. strips of 1”x1/4” and other petty material required to complete the job to the entire satisfaction of Engineer-in-charge.

60

215

12900

... More
S/E of 7 Mtr. long Hot dipped Galvanized pole of octagonal cross-section continuously tapered made out from high tensile steel of minimum thickness 3mm complete with the base plate of minimum size 220mm x220mm x12mm alongwith inbuilt lockable junction box which should be operated with single key with connectors of Elmax / Connectwell / Essen / Wago make for the cable termination as per site requirement and one no. 6 Amps. Single pole MCB for each luminaire. The diameter across from the dimensions of the base and top should be minimum 130 mm and 70mm A/F (Across Face). The size of the poles and foundation bolts shall be suitable to withstand the maximum wind speed/ pressure as per IS-875. There should be no any circumferential welding on the pole. The method and material shall comply with as BSEN-10025 grade S355 or equivalent poles should be hot dipped galvanized in single dip to 65 microns min. confirming to IS 2629-1966. The material and specifications of flange plate/base plate shall be as per IS 2062.

-

-

-

... More
The street light poles shall be as per IS 2062. The street light poles shall be erected in the existing RCC foundation with 4 nos. special foundation bolts ‘J’ type minimum 700mm long galvanized M.S. rod of duly threaded of minimum 20mm dia in existing RCC foundation of suitable size as per the approved drawing. The material of steel foundation bolts shall be confirming to grade EN-8 exposed threaded portion of foundation bolts shall be hot dipped galvanized. The octagonal pole should be of Bajaj / Transrail / Utkarsh / Valmont/ Salasar make only. (The cost of 7 Meter long S/L octagonal poles is including with 4 nos. x M20 x 600mm long ‘J’ type bolts with nuts, carriage of pole at site & installation complete as required.

2

9800

19600

... More
FOUNDATION FOR 7 MTR. LONG OCTAGONAL POLE:

-

-

-

... More
DSR 2.6 (Civil work)

-

-

-

... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and for all lift, as directed by Engineer-in-charge.

-

-

-

... More
All kinds of soil (Size 0.7mx0.7mx1.65m = 0.81 cum (2 Nos. x 0.81cum= 1.62)

1.62

173

280.26

... More
DSR ITEM NO. 4.1 (CIVIL WORK)

-

-

-

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

-

-

-

... More
1:5:10 (1 cement : 5 fine sand drived from natural source : 10 graded stone aggregate 40mm nominal size drived from natural source) (0.7m x 0.7m x 0.10m = 0.05 cum.)

-

-

-

... More
(2 nos. x 0.05 = 0.10)

0.098

6023

590.25

... More
DSR ITEM NO. 5.22.6 (CIVIL WORK)

-

-

-

... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

-

-

-

... More
Thermo-Mechanically Treated bars

-

-

-

... More
1.Vertical Bar 12mm dia =4 nos.x1.55=6.2 r.mtr. @0.89 kg per mtr. =5.52 kg

-

-

-

... More
2.Horizontal Ring 8mm dia =11 nos.x2=22 r.mtr.@0.390kg per mtr.=8.58kg

-

-

-

... More
Total (5.52+8.58=14.1+5% =14.8

-

-

-

... More
wastage = 2 nos. x14.81 = 29.62)

29.62

105

3110.1

... More
DSR 5.1. (Civil) Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

-

-

-

... More
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources) Size 0.5x0.5x1.55 = 0.388 cum = (2 nos. x 0.388= 0.78 cum.)

0.78

8352

6514.56

... More
DSR Item No. 5.9.1 (CIVIL WORK)

-

-

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for :

-

-

-

... More
Foundations, footings, bases of columns, etc. for mass concrete

-

-

-

... More
Size 0.5x0.5x1.55

-

-

-

... More
(0.5 x 1.55) x 4 = 3.1 Sq. Mtr.

-

-

-

... More
3.1 x 2 = 6.2 Sq. Mtr.

6.2

382

2368.4

... More
Supply and erection of sheet metal cubical pedestal of suitable dimensions made from 50 mm X 50 mm X 6 mm thick M.S angle iron frame, covered with 1.6 mm thick M.S. sheet duly welded on five sides and front side hinged complete with locking arrangement with 4 Nos. switchgear supporting members each of M.S. flat 50 mm X 6 mm thick of suitable length duly welded. The cubical pedestal shall have 4 Nos. legs of 50 mm X 50 mm X 6 mm each 60 cm long M.S. angle iron each long including painting, bonding to the existing earth etc. the same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15cm high form ground level and 45 mm thick. The cubical pedestal shall be 15 cm from the top of cement concrete platform.

-

-

-

... More
Cubical size 1200 mm X 900 mm X 350 mm

3

10050

30150

... More
Cubical size 900 mm X 600 mm X 350 mm

8

6850

54800

... More
Fabrication, supplying, installation, testing and commissioning of Indoor type cubicle type fully enclosed compartmentalized electric panel of suitable size (300mm-900mm) deep as required as site suitable for three phase 50 Hz 415 volt AC supply system made out of 1.6 mm thick CRCA sheet duly strong thread with suitable size of MS channel members and base weather proof dust and vermin proof, ventilated with louvers at sides removable gland plates at the bottom, earthing studs at both ends duly painted with powder coated finish of approved shade and two coats of anticorrosion paint including providing and fixing of four strip main and auxiliary aluminium bus bars of rating min 200 amp., multifunction meter, LT phase indicator lamp for each incomer/ outgoing, MCB distribution board metering unit and having space for accommodating various MCCB’s, MCB SP, MCB TPN, Change over switch etc as per site requirement. The manufacturer/ fabricator of LT panel should posse’s type test certificate/ reports w.r.t. construction/ manufacturing of LT panel confirming to IS: 8623/93 with breaking capacity 50KA (minimum) & Degree of protection IP42 (minimum) from CPRI /ERDA approved Lab.

-

-

-

... More
Size 1.7 mtr. X 1.6 Mtr.

2.72

29800

81056

... More
Size 1.7 mtr. X 0.8 Mtr.

1.36

29800

40528

... More
DSR item No. 39.17 Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range: -5° to +60°C. Bending Radius: < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force: 11.5Kg etc. complete as required.

-

-

-

... More
1 Run of cable

600

60

36000

... More
Supply installation testing commissioning of COB DALI dimmable Recess Down Light Fixture to be installed recess in false ceiling. The fitting should be Philips / Wipro/ Lighting Technologies /Bajaj make only. The job includes the cost of testing, commissioning and making connection with copper wire from adjacent light point. The job includes all labour and petty material required to install the fitting to the entire satisfaction of the EIC of work. The LED fittings should be as per following design criteria.

-

-

-

... More
TECH. SPEC. OF LED FIXTURE: Recess COB Down Light Fixture DALI Dimmable

-

-

-

... More
Wattage of LED fittings As per following parameters Total lumens of the LED fittings Minimum 3300 Lumen Housing Die cast aluminium Reflector Anodized aluminium deep recessed reflector for Glare free light Operating voltage 140 - 270Volt, AC, 50Hz ± 1% Power factor >.95 Luminaries efficacy > 110 Lm/Watt or Higher Color rendering index CRI shall be >80 Working/ operating temperature 0℃ to 45℃ or better Color temperature 5700 to 6500 degree K ELECTRONIC DRIVER Drive current (LED) As per OEM Type of Driver Constant current, Constant Voltage output driver THD <10% Surge Protection 2.5 KV Minimum Driver Efficiency >85% Protection Over & Under Voltage protection Warrantee of LED fixture including driver 5 Yrs from the date of Installation Fixture Should comply LM 79 test from NABL or UL accredited Lab LED Make Power CREE, OSRAM, NICHIA, Philips LumiLED. Type of LED 50,000 burning hours @ 70% lumen maintenance complying with LM 80 test report

-

-

-

... More
Life of LED 50,000 burning hours @ 70% lumen maintenance

47

7650

359550

... More
Supply installation testing commissioning of LED Flexible Strip to be installed in existing cove of false ceiling/ wooden design with suitable arrangement. The LED Strip should be Philips / Wipro/ Lighting Technologies /Bajaj make only. The job includes the cost of testing, commissioning and making connection with copper wire from adjacent light point. The job also includes the cost of electronics driver required for the LED Strip of the same make as mentioned for LED Strip. The LED fittings should be as per following design criteria.

-

-

-

... More
TECH. SPEC. OF LED FIXTURE: LED Flexible Strip (5 Mtr Roll)

-

-

-

... More
Wattage of LED fittings As per following parameters Total lumens of the LED fittings Minimum 400 Lumens per meter Mounting and fixing Self Adhesive Operating voltage 140 - 270Volt, AC, 50Hz ± 1% Power factor >.95 Luminaries efficacy > 80 Lm/Watt or Higher Color rendering index CRI shall be >80 Working/ operating temperature 0℃ to 45℃ or better Color temperature 5700 to 6500 degree K

-

-

-

... More
ELECTRONIC DRIVER

-

-

-

... More
Drive current (LED) As per OEM Type of Driver Constant current, Constant Voltage output driver THD < 15 % Surge Protection 2.5 KV Minimum Driver Efficiency >85% Protection Over & Under Voltage protection Warrantee of LED fixture including driver 5 Yrs from the date of Installation Fixture Should comply LM 79 test from NABL or UL accredited Lab LED Make Power CREE, OSRAM, NICHIA, Philips LumiLED. Type of LED 50,000 burning hours @ 70% lumen maintenancecomplying with LM 80 test report

-

-

-

... More
Life of LED 50,000 burning hours @ 70% lumen maintenance

20

2590

51800

... More
Supply, installation, testing, and commissioning of a 6-Watt LED Step Light (recess type) with aluminum die- cast housing in powder-coated grey color and CCT 3000K, complete with an electronic driver. The job includes testing and commissioning to the satisfaction of the Engineer-in-Charge. The fitting should be of Philips / Wipro/ Lighting Technologies /Bajaj make only. The sample of the fixture must be approved by the Engineer-in-Charge prior to site installation.

20

3085

61700

... More
Supply, installation, testing, and commissioning of KNX Bus Power Supply suitable for KNX/EIB intelligent building automation system, having input voltage range of 150–275 VAC, 50/60 Hz and providing Output-1 for KNX bus power supply of 30 V DC SELV, 320 mA with integrated choke for supplying and isolating the KNX bus line and Output-2 as additional auxiliary voltage output of 30 V DC SELV. The unit shall be DIN rail mounted type and shall be complete with inbuilt protection against overload and short circuit, integrated reset facility, screw type terminals and LED indications for Power, Overload and Reset status. The power supply shall be suitable for continuous operation in KNX automation networks and compatible with ETS programmed KNX devices. The item shall include all necessary hardware, interconnections, mounting accessories and wiring required for proper installation, testing and commissioning complete as required at site.

-

-

-

... More
Make: Legrand / JUNG/ ABB/ Siemens only.

1

46600

46600

... More
Supply, installation, testing, and commissioning of KNX 4/8 Button Keypad/Control Element suitable for KNX/EIB intelligent building automation system, configurable for multi-functional operation through ETS programming software. The keypad shall be capable of performing functions such as switching ON/OFF of lighting circuits, dimming control, curtain/blind open-close operation, scene recall and control, staircase lighting control and other programmable KNX automation functions as required. The unit shall be modular type with 4/8 independent programmable push buttons/rockers with status indication LEDs and shall support short press and long press configurable operations. The keypad shall communicate through KNX bus and shall be fully compatible with standard KNX protocol and KNX-certified devices. The item shall be complete with bus coupling unit/interface, mounting accessories, flush mounting box compatibility, front plate, programming facility, interconnections and all associated accessories required for proper installation, testing and commissioning complete as required at site.

-

-

-

... More
Make: Legrand / JUNG/ ABB/ Siemens only.

2

41190

82380

... More
Supply, installation, testing, and commissioning of Web-Based KNX Automation Controller/ Gateway for centralized monitoring, integration and control of all connected KNX devices on a single platform through a common user interface/application. The controller shall be capable of integrating and controlling lighting circuits, dimming modules, curtain/blind controls, HVAC systems, scenes, scheduling functions and other connected electrical loads within the KNX automation network. The controller shall support integrated IP, serial and infrared control in a compact single-unit design and shall be suitable for integration with mobile applications, touch panels, remote controls and web-based interfaces for centralized operation and monitoring. The system shall provide a consistent multi-platform user experience with common themes and layouts across touch panels, remotes and mobile applications. The controller shall be based on an ultra-efficient fanless architecture with no moving parts to ensure silent, reliable and long-lasting continuous operation. The unit shall be compatible with KNX protocol and ETS-programmed KNX devices and shall support future scalability through compatible control extenders/interfaces for larger installations. The item shall include all necessary software licenses, gateways, communication interfaces, power supply requirements, mounting accessories, programming, integration, testing and commissioning complete in all respects as required at site.

-

-

-

... More
Make: Nice ELAN / Legrand / JUNG /ABB/ Siemens only.

1

228600

228600

... More
Supply, installation, testing, and commissioning of KNX–DALI Gateway/ Controller suitable for intelligent lighting automation system for integration of DALI lighting network with KNX/EIB building automation system. The gateway shall support control and monitoring of DALI electronic control gear/luminaires through KNX protocol and shall provide one complete DALI universe comprising 64 DALI addresses per control output. The controller shall be available with 1/2/3 DALI control outputs supporting full DALI universes of 64/120/192 addresses respectively, including backward channel communication for status feedback, fault monitoring and real-time control verification. The gateway shall additionally support DMX-512 control functionality for integration of architectural and dynamic lighting systems wherever required.

-

-

-

... More
The KNX-DALI controller shall have an inbuilt/on-board web server facility for configuration, testing, commissioning and verification of connected lighting loads through web-based interface without requiring additional external software. The unit shall support switching, dimming, scene control, group control, scheduling, status monitoring, emergency lighting integration and programmable automation functions through ETS software and DALI commissioning interface. The gateway shall be DIN rail mounted type and fully compatible with standard KNX and DALI protocols.

-

-

-

... More
The item shall include all necessary interfaces, communication modules, addressing/ programming accessories, software integration, mounting hardware, wiring terminations and all associated accessories required for proper installation, testing and commissioning complete in all respects as required at site.

-

-

-

... More
Make: Legrand / JUNG/ ABB/ Siemens only.

1

61600

61600

... More
DSR item No.4.1 Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastner etc as required.

-

-

-

... More
300 mm width X 50 mm depth X 1.6 mm thickness

50

866

43300

... More
DSR Item No.1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

-

-

-

... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire

20

813

16260

... More
SCHEDULE-B (DG SET)

-

-

-

... More
DSR item No.29.1

-

-

-

... More
Supplying, Installation, Testing & Commissioning of ‘Silent Type Diesel Generating set as per CPCB IV + or better norms along with having Prime Power Rating of KVA as below, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor, including testing at factory and site with fuel, load for test and other necessary arrangements Complete as per CPWD specifications, should have QR code which should contain drawing, test report OEM manual, Geo- Tag of manufacturing location, rating plate as per relevant IS Code etc. and consisting of the followings:

-

-

-

... More
(A) Diesel Engine: Turbocharged Diesel engine 4 stroke water cooled, multi cylinder, dynamically balanced fly wheel, electric start of suitable BHP at 1500 RPM suitable for above output of alternator at 40⁰C, 50% RH & at 1000 Meter MSL, capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be with electronic governor, Dry type Air filter with service indicator, first filling of engine fuel (after commissioning) lubricating Oil, Coolant and other consumables complete with all the required accessories, the electronic governor shall be as per ISO 8528.The engine shall comply to the latest CPCB norms (CPCB IV + or better) and conforming to BS 5514, BS 649, IS 10000, IS 10002, IS 13018 and as per CPWD specifications.

-

-

-

... More
B) Engine mounted Instrument Panel fitted with and having digital dis Plate for following:

-

-

-

... More
Start-stop switch with key

-

-

-

... More
Water temperature indication

-

-

-

... More
Lubrication oil pressure indication

-

-

-

... More
Lubrication oil temperature indication

-

-

-

... More
Battery charging indication and Voltage indication

-

-

-

... More
RPM indication

-

-

-

... More
Over speed indication

-

-

-

... More
Low lubrication Oil trip indication

-

-

-

... More
Engine Running Hours indication

-

-

-

... More
Fuel Level

-

-

-

... More
(C) Alternator: Synchronous alternator rated of appropriate KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor at 40⁰C, 50% RH & at 1000 Meter MSL. The alternator shall be having Screen Protected Drip Proof (SPDP) enclosure IP23, brushless, continuous duty, dynamically balanced rotor, capable of taking 10% over loading for one hour after 12 hours of continuous operation, self-cooled, self-excited and self-regulated through AVR conforming to IS13364(Part 2)/IS: 4722/BS 2613 suitable for tropical conditions and with class- H insulation.

-

-

-

... More
(D) Base Frame & Foundation: Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer.

-

-

-

... More
(E) FUEL TANK: Daily service fuel tank of suitable liters capacity as per CPWD Specifications, fabricated out of 3 mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications.

-

-

-

... More
(F) Exhaust System: Dry exhaust manifold with hospital type exhaust silencer and catalytic convertor.

-

-

-

... More
(G) Starting System: 12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable numbers of batteries (180 AH capacity lead acid SMF type) as required as per specifications. The battery shall be housed inside the acoustic enclosure of DG Set.

-

-

-

... More
(H) Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere and the temperature rise inside the enclosure, noise level outside enclosure. The acoustic enclosure should be suitable for cable connection/connection through bus-trunking. Such arrangements on acoustic enclosure should be water proof & dust-proof conforming to IP-65 protection. The enclosure shall be as per CPCB IV + or better norms etc. and as per CPWD specifications.

-

-

-

... More
(I) AMF Panel: Free standing floor mounted IP 42 automatic mains failure control panel including auto by-pass, suitable for KVA as below for silent type DG set complete with relays, timers, set of CTs for metering & protection and energy analyzer to indicate currents, phase and line voltages, frequency, power factor, KWH, Kilo Volt Ampere Reative Hour (KVARH), KVA (Phase & Total), KW & provision for overload, short circuit, restricted earth fault, under frequency, power (aluminium) and control (copper ) cabling of suitable size upto 15 meter between AMF panel, LT Panel and DG Set including connection interconnection etc. as required, all complete and inter locking and communication/ Ethernet /RS485/ SNMP port open protocol for BMS integration including suitable software, the panel shall be of DG Set OEM make etc. as per approved by Engineering in charge and including the following:

-

-

-

... More
1. Suitable numbers and appropriate capacity 4 pole motorised electrically operated draw out with cradle type 3 position ACB/ MCCB with electronic release for O/C & E/F and shunt trip.

-

-

-

... More
2. Auto/Manual/Test/Off selector switch

-

-

-

... More
3. Protection for under and over voltage phase reversal (2 nos Over voltage relay, 2 Nos. reverse power relay and 2 Nos. under voltage relay).

-

-

-

... More
4. 3 Sets of current transformers 15 P 10 accuracy for protection and 15 VA class-I for metering

-

-

-

... More
5. Energy analyser unit to indicate current, Voltage( L N & L_L), kW, kVA (Phase & Total), Frequency, KWH, PF.

-

-

-

... More
6. LED Indicating lamps for load on mains and load on set

-

-

-

... More
7. Fuse/ MCB for instruments

-

-

-

... More
8. Battery charger, complete with transformer/ rectifier, D.C. voltmeter and ammeter, selector switch for trickle, off and boost and current adjustment.

-

-

-

... More
9. Main supply failure monitor

-

-

-

... More
10. Supply failure timer

-

-

-

... More
11. Restoration timer

-

-

-

... More
12. Control unit with three impulse automatic engine start/stop and failure to start lockout.

-

-

-

... More
13. Impulse counter with locking and reset facility.

-

-

-

... More
14. ON/OFF/Control circuit switch with indicator

-

-

-

... More
15. Audio/Video annunciation for

-

-

-

... More
(i)           High water temperature

-

-

-

... More
(ii)         Low lubricating oil pressure

-

-

-

... More
(iii)        Engine over speed

-

-

-

... More
(iv)       Engine fails to start

-

-

-

... More
(v)        Full load/maximum load warning

-

-

-

... More
16. Protection for over/under Frequency, Loss of AC sensing, Over Current, Unbalancing load with suitable number of relays and accessories

-

-

-

... More
17. Maintenance notification based on Engine Run Hour & due date.

-

-

-

... More
18. Load Management through PLC to achieve auto opening and closing of incomer breakers, bus coupler switching of essential panel, interlocking providing signal to AMF Panel for load status and AMF shall give command to DG Set to auto start / auto stop depending upon load status and requirement etc. and necessary hardware and software required to perform the operation shall be provided by the contractor including all control wiring.

-

-

-

... More
62.5 KVA

1

597453

597453

... More
FOUNDATION FOR DG SET

-

-

-

... More
DSR 2.6 (Civil) Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and for all lift, as directed by Engineer-in-charge. i) All kind of soil.

4.15

173

717.95

... More
DSR 2.27 (Civil) Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

1.38

2066

2851.08

... More
DSR item No. 4.1.11 (Civil) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

-

-

-

... More
1:5:10 (1 cement: 5 fine sand derived from natural sources: 10 graded stone aggregate 40 mm nominal size derived from natural sources).

2.77

6023

16683.71

... More
DSR 5.22 (Civil) Steel Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.

-

-

-

... More
Thermo-mechanically treated bars of grade Fe-500D or more.

202

105

21210

... More
DSR 5.1 (Civil) Providing and laying in position specified grade of reinforced cement concret, excluding the cost of centering, shuttering, finishing and reinforcement- All work upto plinth level:

-

-

-

... More
1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural source: 4 graded stone aggregate 20 mm nominal size derived from natural sources) .

1.84

8352

15367.68

... More
DSR 13.1 (Civil) 12 mm cement plaster of mix:

-

-

-

... More
1:4 (1 cement: 4 fine sand)

11.84

338

4001.92

... More
DSR Item No. 5.9 (Civil) Centering and shuttering including strutting, propping etc. and removal of form for :

-

-

-

... More
Foundations, footings, basis of columns, etc. for mass concrete.

8.45

382

3227.9

... More
DSR 12.1.1 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

-

-

-

... More
1.00 mm thick with zinc coating not less than 275 gm/m²

15

1418

21270

... More
DSR 10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

-

-

-

... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

415

168

69720

... More
DSR item No.5.4 Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (with charcoal/coke and salt) as required.

4

8351

33404

... More
DSR item No.5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

40

287

11480

... More
DSR 11.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

-

-

-

... More
3½ X 50 sq. mm (35mm)

4

484

1936

... More
DSR item No.15.16 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

-

-

-

... More
63 mm dia (OD-63 mm & ID-51 mm nominal)

180

289

52020

... More
Supply and laying of XLPE insulated PVC sheathed Aluminum conductor armoured cable of 1.1 KV grade as per IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid in existing Trench/ Ducts/Cable Tray/ RCC/ HUME/ METAL/ DWC pipe / on surface with the help of MS clamps of suitable size/ as required at site to the entire satisfaction of Engineer-in-Charge. The job includes labour charges of laying the cable and making connections with suitable size aluminum lugs/thimbles etc. The cable shall be of Polycab / Havells / R.R. Kabel/ KEI/ Finolex make only.

-

-

-

... More
Size 50 Sq. mm 3.5 core (In pipe)

200

722

144400

... More
SCHEDULE-C (UPS)

-

-

-

... More
DSR item No.26.2 Online UPS- Input supply: Three Phase, Output supply: Three Phase

-

-

-

... More
Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor) at operating temperature 0 to 40 deg C, Relative humidity 0 to 95%, Online double conversion true sine wave Uninterrupted hot swapable (allow for the replacement or addition of battery modules without shutting down the entire system) modular Power Supply (UPS) system with N+1 modules (N denotes total number of modules required for rated capacity). The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back up (Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass switch alongwith manual bypass, suitable isolation transformer for additional protection against neutral faults etc. UPS shall have inbuilt phase sequence correction. The UPS systems offered are to be of the latest technology with Digital Control Microprocessor based for reliable operation using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier & inverter (3 Level) with PWM (Pulse Width Modulation). The quality of design, manufacturing and inspection process should confirm to the relevant Inter-national standards such as IEC/EN/VDE.

-

-

-

... More
The operating efficiency of the UPS systems shall be ≥96% while operating on battery mode and delivering quality power to the 100% non-linear loads. Current total harmonic effect (ITHD) on the input grid shall be < 5% at 50 %load. (The required LC (inductor (L) and a capacitor (C)) filters shall be included in UPS cost), extreme power factor kit to be included to limit the input power factor (PF) to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1), however UPS shall be suitable to take load at 0.7 lagging to 0.7 leading power factor loads. UPS shall be suitable for incoming supply AC: 3Phase 400V +/-20%, 50 Hz +/-5 Hz, AC Output voltage: 3Phase 415 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins, Sine wave output. Non condensing, noise level less than 60db at 1 meter distance, protections: Input Under voltage over voltage, abnormal out voltage, battery over charging, output over current, short circuit protection, battery deep discharge protection, 10KV surge. UPS must comply with low voltage electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204 Part I and Part 2, it shall be a Voltage and Frequency Independent (VFI)-type UPS. Communication RS232/RS485/SNMP port open protocol for BMS integration, all hardware & software for iOT Communication as per approved by Engineering in charge.

-

-

-

... More
Required battery racks and interconnecting copper conductor cables of suitable size and connectors and all required accessories are inclusive of the cost). This system must provide a means for logging and alarming of all monitored points plus email notification. Forced air-cooling with integral inbuilt fans with redundancy (if one fan fail UPS should be able to handle at least 80% of the load, Noise Level 65 DB at 1 meter distance. The system shall be in compliance IEC 62040- 1,2 & 3, IS: 16242 and CPWD Specification. Display Panel (minimum) (In-build 5 inch or more LC Display / LED) to display: a) Input: Voltage, current, Frequency. b) Bypass: Voltage, Frequency. c) Output: Voltage, frequency, Current. d) Battery: Voltage, Capacity. e) Load: KVA, KW, Percentage. f)Temperature: STS, Inverter, PFC. g) Event Logging & Statistical Data (On LCD/LED): UPS should capture

-

-

-

... More
and display up to 3000 events like: Over temperature / DC Bus Fail / Fan Fail / Fuse Fail / Overload / Short-circuit / Device Fail / Inverter Fail / Rectifier Fail / Bypass Fail, etc. h) Statistical Data: No. of power failures / Transfers to Bypass / Total Running time, etc. i) Mains Mode of Operation /Battery Mode of Operation / Bypass feeding the load / UPS Fault /Battery charging and discharging, overload, battery voltage and battery capacity. j) Audible Alarms : Mains Failure, Battery Low Alarm, UPS Overload, Fault, Shutdown, Input Over, Under Voltage, Output Over, Under Voltage, Battery Over, Under Voltage, Over Load and short circuit, Over Temperature. The UPS should have QR code which should contain drawing, test report OEM manual, Geo-tag of manufacturing location etc.

-

-

-

... More
40 KVA (Each Power module shall be ≤ 10 KVA)

1

599469

599469

... More
DSR item No.2.5 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

-

-

-

... More
12 way (4 + 36), Double door

1

13512

13512

... More
DSR item No.2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

-

-

-

... More
Single pole

24

285

6840

... More
Triple Pole

4

1070

4280

... More
DSR item No.5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

4

8351

33404

... More
DSR item No.5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

40

287

11480

... More
DSR item No.2.2 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required.

-

-

-

... More
100 A,30KA,FPMCCB

1

8127

8127

... More
DSR Item No.1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

-

-

-

... More
4 X 16 sq. mm + 2 X 6 sq. mm earth wire

20

1454

29080

... More
SCHEDULE-D (FIRE ALARM SYSTEM)

-

-

-

... More
DSR item No.1.17 Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

-

-

-

... More
2 x 1.5 sq.mm

200

77

15400

... More
3 x 1.5 sq.mm

100

104

10400

... More
DSR 1.20 Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

-

-

-

... More
25 mm

300

289

86700

... More
DSR item No.1.18 Supplying and drawing following pair 0.5 mm dia FRLS/HFFR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

-

-

-

... More
2 Pair

60

39

2340

... More
DSR 28.1.4 Supplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

5

444

2220

... More
DSR 28.1.7 Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.

5

530

2650

... More
DSR item No. 28.1.8 Supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required.

3

963

2889

... More
DSR 28.1.11 Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required.

-

-

-

... More
6 zone panel for fire alarm system 100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required- 2 Nos. (one to act as standby) Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit -1 set.

-

-

-

... More
Announcement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc., complete as required- 1 set. Amplifier change over switch for inter changing amplifier- 1 No. Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required- 1 No. Gooseneck microphone with stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required -1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt, 30 AH each sealed maintenance free batteries -1 set.

1

52258

52258

... More
DSR item No. 28.5.3 Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.

-

-

-

... More
speaker cable Single pair, 2-core, 1.5 sqmm

200

61

12200

... More
Supply and installation of Red/ Green LED Laser etched emergency exit signage‘s double sided pendant type made out of powder coated MS housing and etched acrylic sheet indicator with reflective light source> 2W LED, Emergency Backup of minimum 4 hours, 6V 3.2 AH SMF/ SLA battery, SMPS Power supply suitable for operation on 230 AV 50 Hz AC supply as per the requirement at all prominent locations to guide the way out of the building to the building users in case of fire. The size of the letter should be sufficient for visibility of the people as per NBC-2016. The exit sign board should be of THORN/ PROLITE/ AUTO GLOW/ AUTOLITE/ GLOWLITE/ HONEYWELL make only.

5

2520

12600

... More
Supply, installation, testing and commissioning of 2x10 watt wall/ceiling mounted industrial Double Beam emergency LED light with exit sign board. The fitting should have CRCA steel housing, 5700K color Temperature, 50000 burning hours, minimum emergency backup of 4 to 5 hours. The fitting should be fully automatic i.e. automatic on in case of normal supply failure and automatic off as power resumes. The battery should have inbuilt protection for over, under charge and short circuit protection. The job also includes the cost of testing commissioning and making connections with 3x1.5 copper conductor from adjacent light point, other petty material and labour etc. as required to complete the job to be entire satisfaction of Engineer-in-Charge. Make: Mr. Lite/ Agni/ Edvent only.

5

4950

24750



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.