Chandigarh Administration Tender
... More
The Chandigarh Administration has issued a formal invitation for competitive bids for Mtc. Of E.i. In Nrb At U.t., Chandigah (temporary Arrangements For The Required Electrical Accessories In The Auditorium/multipurpose Hall, Strong Room And Other Areas Required For Election Related Activities At Post Graduate Government College (co-e in Chandigarh, with an estimated contract value of Rs. 2,69,754. The bid opening date for this tender is 13-11-2026 and the last date for bid submission is 19-11-2026. Interested bidders for Chandigarh Administration tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Chandigarh Administration Tender - Chandigarh Tender
Opening Date13 Nov 2026
Closing Soon19 Nov 2026
Tender Amount₹ 2,69,754
Costs
EMD
₹ 5,400Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Mtc. Of E.i. In Nrb At U.t., Chandigah (temporary Arrangements For The Required Electrical Accessories In The Auditorium/multipurpose Hall, Strong Room And Other Areas Required For Election Related Activities At Post Graduate Government College (co-e
Contact
Tender Id
2026_CHD_96771_1Tender No
E3/47W/180Tender Authority
Chandigarh Administration ViewPurchaser Address
-Website
http://chandigarh.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
MTC. OF E.I. IN NRB AT U.T., CHANDIGAH (TEMPORARY ARRANGEMENTS FOR THE REQUIRED ELECTRICAL ACCESSORIES IN THE AUDITORIUM/MULTIPURPOSE HALL, STRONG ROOM AND OTHER AREAS REQUIRED FOR ELECTION RELATED ACTIVITIES AT POST GRADUATE GOVERNMENT COLLEGE (CO-ED), S
MTC. OF E.I. IN NRB AT U.T., CHANDIGAH (TEMPORARY ARRANGEMENTS FOR THE REQUIRED ELECTRICAL ACCESSORIES IN THE AUDITORIUM/MULTIPURPOSE HALL, STRONG ROOM AND OTHER AREAS REQUIRED FOR ELECTION RELATED ACTIVITIES AT POST GRADUATE GOVERNMENT COLLEGE (CO-ED), S
BOQ Items
... More
25 mm
200
168
33600
... More
32 mm
200
209
41800
... More
DSR Item No.1.24Supplying and fixing following modular switch/ socketon the existing modular plate & switch box includingconnections but excluding modular plate etc. asrequired.
-
-
-
... More
15/16 A switch
15
176
2640
... More
DSR item no. 1.26Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
10
47
470
... More
DSR item no. 1.27Supplying and fixing following size/ modules, GI boxalong with modular base & cover plate for modularswitches in recess etc. as required.
-
-
-
... More
3 Module (100mmX75mm)
15
384
5760
... More
DSR item no. 1.31Supplying and fixing suitable size GI box with modularplate and cover in front on surface or in recess,including providing and fixing 3 pin 5/6 A modularsocket outlet and 5/6 A modular switch, connectionsetc. as required.
5
545
2725
... More
DSR item no.2.2Providing and fixing following rating and breakingcapacity and pole MCCB with thermomagneticrelease and terminal spreaders in existing cubiclepanel board including drilling holes in cubicle panel,making connections, Ics=100% Icu and Operational Voltage 690V etc. as required.
-
-
-
... More
63/100 A,30KA,FPMCCB
1
8127
8127
... More
DSR item no. 2.5Supplying and fixing of following ways surface/ recessmounting, vertical type, 415 V, TPN MCB distributionboard of sheet steel, dust protected, duly powderpainted, inclusive of 200 A tinned copper bus bar,common neutral link, earth bar, din bar for mountingMCBs (but without MCBs and incomer) as required.(Note: Vertical type MCB TPDB is normally usedwhere 3 phase outlets are required.)
-
-
-
... More
4 way (4 + 12), Double door
1
7951
7951
... More
DSR item no. 2.10Supplying and fixing 5 A to 32 A rating, 240/415 V, 10kA, "C" curve, miniature circuit breaker suitable forinductive load of following poles in the existing MCBDB complete with connections, testing andcommissioning etc. as required.
-
-
-
... More
Single pole
12
285
3420
... More
Triple pole and neutral
1
1301
1301
... More
DSR item no. 8.10
LED Batten light (System lumen efficacy ≥120 <135 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -5 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends,CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)
-
-
-
... More
Powder Coated CRCA Sheet Body (Thickness >0.50 mm)
-
-
-
... More
18- 22 watt
20
681
13620
... More
DSR item no.8.16 LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥120 and <135 lm/Watt).
Supplying, installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -5 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement deg, suitable tilt able fitting, life time (LED, Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 and <135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).
-
-
-
... More
100 watt
20
2467
49340
... More
Supply and laying of PVC insulated aluminum conductor unarmourned cable 10mm² 2 core flat with 6 SWG GI Earth wire on existing surface with suitable clamps/ Hangers etc. The job including making connection and petty material such as labouretc as required to complete the job as per satisfaction Engineer in charge.
100
160
16000
... More
S/E of 3 pin Plug top 5/6 amp of Anchor/ABB/Gold medal/Havells make or its equivalent including carriage erection, making connection and other petty material etc. as required to complete the job to the entire satisfaction of EIC.
10
160
1600

