Cable Tenders

Details: Supply, Installation, Testing & Commissioning Of High Capacity Modular Integrated Pantry Equipment To Edts 446, Rev-0, Amendment-1 Along With Enhanced Capacity Chimney To Edts-447 For lhb Non-ac Pantry Coach For Amrit Bharat Rake. Note: 1. Power Rating Of Hot Plates To Drg.no Lh72256 , Lh72257 Shall Be As Per Rcf Letter File No. Ed2019 Dt.26-11-2024. 2. Termination Of Pantry Equipment input Power Supply Cables At Both Ends (plug-end & Equipment End) Shall Be In The Scope Of Supplier. 3. instead Of Elcb, Rcbo Shall Be Provided. 4. Packing Instruction: Pi146 Ver 2.0. [ Warranty Period: 48 Months After The Date Of Delivery ] ]

Details: Description :supply, Installation, Testing And Commissioning Of Smps Based Ips Conforming To Rds o Specn. No. Rdso/spn/165/2012 Ver. 3.0 Or Latest Amendment And Sketch No Sdo/ips/lc/07 Ips For interlocked Lc-gate Re/nre Area Along With 200ah Lmla Battery Bank (55+5) Along With Remote Ind ication Panel. The Length Of Cables Required From Ips To Battery Bank 25 Sqmm Flexible Copper Wire red & Black As Per Rdso Specification Will Be Supplied By Oem. Sketch Attached In Document. (inspe ction By Rdso). Installation, Testing And Commissioning As Per Special Tender Conditions Para 3.2(b) [ Warranty Period: 12 Months After The Date Of Delivery ] ]

Details: Supply of specific materials and Installation and commissioning of 10KWP Rooftop Solar Power Plant On-Grid at Raina-I Panchayat Samity. (i)Supply of composite capacity Mono/ Multi Crystalline SPV modules as per latest IEC standard (10 KWP) (Make – Modern/Sova/HR Solar or Equivalent)., (ii)Design, Manufacturing & supply of 10.5 KW Three Phase Solar Inverter with MPPT Charge Controller – (Make-ABB/ HAVELLS or Equivalent)., (iii)Supply of Composite Complete BOS items like modules on structure. AJB, MJB & necessary cables to complete the system wiring module mounting structure& Control Panel., (iv) Installation and commissioning of 10KWP On-Grid Rooftop Solar Power Plant.

Description: Condemned Diesel Loco No.36142 Wds/6 With Iron, Steel And Non-ferrous. Restricted Items: 1. Complete Wheel Set With Gear Without Axle Box Equal To 06 Sets. 2. Piston Main ( 22 Kg Each) Equal To 06 Nos. List Of Removed Items: 1. Air Brake Valves And Cocks 01 Set. 2. Fttm Blower 01 Number. 3. Radiator Core 01 Number. 4. Lube Oil Pump 01 Number. 5. Radiator Fan 01 Number. Non- Ferrous Unserviceable Items To Be Handed Over To Purchaser: 1. Car Body Cables Equal To 01 Set. 2. Radiator Core 01 Number. 3. Epc, Reverser & Bkt Equal To 01 Set. 4. Traction Motor Equal To 06 Nos. 5. Traction Generator Equal To 01 Nos. 6. Auxiliary Generator & Exciter Equal To 02 Nos. 7. Fpm & Ccem Equal To 02 Nos. 8. Suspension Bearing Equal To 24 Nos. Remark: 1. Restricted Items To Be Returned To The Stockholder In Good Condition By The Purchaser At The Time Of Delivery. 2. Lot No. Is Painted On Loco. 3. Approach Road Is Available Up To The Lot. 4. Hsd Oil And Lubricants If Found To Be Returned To The Stockholder. 5. Loco Is Presently Stabled At Diesel Loco Shed Kurla, After Auction And Before Handing Over, Loco Will Be Placed At Cla Yard For Cutting And Delivery Purpose. Purchaser Is Advised That Loco Will Be Placed Only After Certification Of Line By Sse/pway/mnkd And As Advised By Sse/d/cla. 6. After Purchaser Submit All The Documents And D.o. After Auction To Adme/d/cla Office, Sse/d/cla In Consultation With Sse/p.way/mnkd Will Decide The Date Of Placement Of Loco At Cutting Yard And Only After Handing Over Of Loco Will Be Done. 7. Purchaser Has To Ensure Safety Of Railway Assets And His Labour While Working In Railway Premises. If Any Losses Arise Due To Negligence, The Purchaser Will Be Fully Responsible. 8. Purchaser Has To Personally Visit The Site And See The Lot. No Claim Will Be Entertained After Sale Of Lot. 9. Purchaser Has To Keep Enough Water/ Sand At The Cutting Site. 10. Lot Is Ok For Sale. Location: Presently Stabled At Diesel Loco Shed Kurla. Stockholder: Adme D Cla.

Description: Dismantling Of Abandoned/condemned Railway Shed No. 8 Consisting Of - Columns, Base Plate, Top Plate, Truss, Cantilever, Cross Bracket, Plate/cleat, Purline, Side Angle, Cross Bracing, Angle Above Gate, Flat, Ac Sheet, G.i.sheet, Shutters. Remarks - Lot Is Approachable By Pakka Road. The Delivery Of M.s. Ferrous/gi Sheet/shutters Will Be Made On Actual Weighment Basis Only At Hbhr Depot. The Weighment Will Be Done At Hbhr Depot. The Items Mentioned In The Description Only Will Be Delivered. Delivery Of Ac Sheet (1787.3m2 (approx.) Will Be Done On As Is Where Is Basis. No Claim Will Be Entertained For Any Shortage Of Ac Sheets. Lot Number Is Exhibited/painted On The Shed. The Quantity Is Worked Out On Approximate Basis. In Case Of Excess Quantity Of Ferrous Entire Quantity To Be Lifted By The Purchaser By Payment For Difference Of Actual Quantity Delivered With Lot Quantity. Materials Like Electric Wires, Fittings & Cables And Other Such Kind Of Materials Available Inside The Shed Which Is Not Within The Scope Of Lot Description, Shall Be Handed Over By The Purchaser To Custodian. The Items Used In Fencing Around The Structure Such As Rail, Tie Bar, Jali, Stone, Bricks, Wooden Pillar Or Any Other Items And Similar Type Of Material Lying Nearby The Structure/lot Will Not Be Delivered. Dismantling & Cutting Is Allowed For Easy Loading Purpose At The Risk & Cost Of The Purchaser. Dismantling Is Permitted Upto Ground Level Only. The Purchaser Should Ensure That During Dismantling & Cutting Operation No Nearby Structure/building Should Be Affected And Take Necessary Care/safety Precautions To Avoid Any Mishap As Well As Damage To Railway Property. The Purchaser Will Be Fully Responsible If Any Accident/unusual Incident Occurs At Work Site/place During Dismantling. Extra Precaution To Be Taken If There Are Trees Near The Structure Or Its Branches Are Spread Over The Same. Train Operations And Other Railway Work Should Not Be Disturbed/affected. All Debris Should Be Cleared Before Completion Of Delivery. The Purchaser Is Advised To See The Lot Site/content Before Bidding. No Claim Will Be Entertained After Sale Of Lot. Lot Is Ok For Sale With Above Observations. Qty - Ferrous - 70.042 Mts. (approx.), G.i. Sheet - 0. 628mts. (approx), Shutter - 0.254 Mts. (approx). Total Qty (ferrous) - 70.924 Mts. (approx). Location - Wadibunder Yard. Stock Holder - Sse (works) Wadi Bunder. Note - Free Delivery Period Up To 80 Days. Note - Original Lot No. 520223101006.

Description: Scrap Redundant Line Pachora -jamner (n.g) Mixed Up With Different Items Of P.way Materials Consisting Of Rails 69 Lbs & 90 R , C I Pots 69/82 With Tie Bars & Cotter Pin Various Size, Fish Plates Various Size, Fish Bolt Various Size, Check Rail 69 Lbs ,guard Rail 90 R, M S Keys, Steel Channel Sleeper, J/n Fish Plate, C.i Chairs 69 Lbs With Rail Screw, St Sleeper, Dog Bolt & Taibars At Br No 422/2. Complete Details As Per The Annexure.free Delivery Period May Be Upto 65 Days 1) Lot Is Approachable By Kuchha /pakka Rasta. Delivery Possible In Dry Season Only. 2) Ss-11 No. : - Sc/2024-25/13 Dt.04/06/2024 2) Ds8 Note No. 0063653 Dtd-04/06/2024 3) Lot Number Board Is Exhibited / Painted. 4) Similar And Other Type Of P.way Materials Are Laying Nearby Lot Will Not Be Delivered. 5) If Any Other Than P.way Materials Found Will Not Be Delivered. 6) It Is Strictly Advised To Bidder To See The Lot Personally & Loading Point Before Bidding For The Lot In E-auction. 7) Lot Will Be Sold On ¿by Lot Basis¿. 8) As Per Ss-11 The Quantity Is Physically Available At Location. 9) Lot Is In Order/ Ok And Can Be Put Up For Auction Sale. 10) After Joint Lot Inspection, If Any Addition, Deletion, Alteration & Variation Come In The Lot, Stock Holder Will Be Fully Responsible. 11) Materials Other Than Description Not To Be Delivered. 12) Wooden Sleepers Laid In Track Will Not Be Delivered. 13) At Level Crossing, Gate Operating Equipment¿s & Lifting Barriers, Rail Post, Fencing Will Not Be Delivered. 14) At Girder Bridges, Steel Girders, Materials Of Pathway, Railing, And G.i Pipe Carrying Cables Will Not Be Delivered. 15) Any Materials Other Than Redundant Line Lying & Erected On Both Side Of The Track Will Be Retained By The Custodian. 16) Weight Shown Are Indicative & Railway Will Not Be Responsible For Any Shortage. 17) After Handing Over The Relevant Line/siding The Purchaser Will Be Fully Responsible For The Dismantling And Removal Of The Released Materials. Any Loss/damage That May Arise From The Date Of Acceptance Of The Offer Of The Successful Purchaser By Pcmm To The Date Of Complete Removal Of All Released Material From The Site, Due To Theft, Accident, Flood Etc. Shall Be The Sole Responsibility Of The Purchaser And No Claim On This Account Will Be Entertained By The Railways Under Any Circumstances.

Description: CATEGORY: Welding 10H work housing, P. No. : K-SWS-10H-D-WSH, Make- Swagelok , Welding System 10H-D Motor side housing, P. No. : SWS-10H-D-MSH, Make -Swagelok , Welding system Socket Head Cap, SHCS 4-40 X 1.250 IN. P. No. : K-13162, Make -Swagelok , Welding system Socket Head, SHSC 4-40 x 0.625 in, P. No. : K-13160, Make - Swagelok , Welding system Work Extension Bar, P. No. : K- 21093, Make -Swagelok , SS Button Head Screw, 4-40 x 0.250 in. P. No. : K-188-21066-RCEU, Make -Swagelok , Welding System Plastic Ball Bearing 10H weld head, P. No. : K-11154, Make Swagelok , Welding system 20 Series Socket Head, SHCS 2-56 X 0.250 IN, P. No. : K-13176, Make - Swagelok , Welding System Electrode Clamping Plate, 5H weld head SS metal part, P. No. : K-11204, Make -Swagelok , Welding System 10/20 Series Ceramic, 10H, 20H, weld head Ceramic Insert part, P. No. : K-11210, Make , Welding system Socket Head Cap, SHCS 4-40 X 0.500 IN, P. No. : K- 13163, Make -Swagelok , Welding System Work plate, 10H weld head Brass metal work part, P. No. : K-11054, Make - Swagelok , Welding system weld head screw, P. No. : K-188- 13124-RCEU, Make -Swagelok , SS Pan Head Screw, 4-40 x 0.250 in, P. No. : K-188-21066-RCEU, Make -Swagelok , Welding System 20H Gear Assembly, 10H-20H Gear Assembly ss metal gear part, P. No. : 10009-5, Make -Sw , Welding System Gear Assembly 10H Series, 5H and 10H weld head gear SS metal gear part, P. No. : 10009 , Welding system Plastic socket head cap screw, 5, 10, 20, series weld head SHCS 6-32 X 0.437 IN, P. N , Welding system Locking Tab For CWS-10TFB, 10H weld head, P. No. : K-12148, Make -Swagelok , Welding System Ceriated Tungsten, Electrode Diameter (D) = 0.062" and Electrode Length (L) = 1.105" No , Welding System Ceriated Tungsten, Electrode Diameter (D) = 0.062" and Electrode Length (L) = 0.855" No , Welding System 230v, M200 Power, Welding machine Power cord cable, P. No. : CWS-CORD-10, Make -Swagel , Welding System Thermal Printer Paper for Swagelok Welding System Power Supply Printers (10 Rolls) , P , Welding system Split Lock Washer 5H, 10H, 20H series Extension Bar washer, P. No. : K-13208, Make -Sw

Description: CATEGORY: Labour Charges for Repair of vehicle heat and radiator cleaning testing etc for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Labour Charges for Repair to engine pulling weak repairing etc for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Labour Charges for Changing of Engine Oil, complete testing etc for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Labour Charges for Repairing of meter testing and commissioning etc for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Water Pump for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Radiator Fan with Pulley for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Heat Meter Switch for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Coolant for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Distilled Water for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Fuel Injector Pump Head for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Injector Nozzle Element for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of FIP Bearing Set for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of FIP Cam Plate for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of FIP VAN Pump for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Fuel Injector Pump Assy Gasket for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Manifold Joint for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Mobil Oil for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Mobil Filter for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Diesel Filter for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Air Filter for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Kilometer Cable for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong , Supply of Fuse for Repair of TATA Telcoline BA No 14C 098631K under GE I AF Shillong

Details: Punjab & Sind Bank, Guwahati Zonal Office Invites Sealed Tenders In 2 Bids System From Reputed, Bona Fide And Intending Contractors In The Prescribed Format For Proposed Interior Furnishing, Electrical, Lan Cabling & Ac Works Of Its Proposed New Premises At Dharmanagar, North Tripura. Last Date Of Tender Document Submission 09.01.2025. No Bids Will Be Accepted After 3 Pm And All Bids Received After The Time Will Be Summarily Rejected Even Without Opening Of Technical Bids. The Bank Reserves Right To Cancel Any Or All Tenders And Stop The Process At Any Point Of Time Without Assigning Any Reason Or Notice Whatsoever. I) Bidders Can Download The Requisite Tender Documents From Our Website-www.punjabandsindbank.co.in For Any Further Clarification/query Contact-+91-7896536440 During Office Hours From 10.00 Am To 5.00 Pm Over Phone Or In Person. Zonal Manager Click Here

Description: CATEGORY: Cat Part No 61-1-61-VAL-3K0035 Bearing , Cat Part No 61-1- 61-VAL-3K0032 Bearing , Cat Part No 61-1-61-VAL-3K0001 Gear with Splines , Cat Part No 61-1-61-VAL-3H0093 Pipe Assy , Cat Part No 61-1-61-VAL- Brake Valve Assy , Cat Part No 02-200002 Liner , Cat Part No 1X0480 Hyd Pump seal , Cat Part No 9221 Gasket , Cat Part No 250843 Ring Rubber O , Cat Part No 3023994 Seat , Cat Part No 68210 Gasket , Cat Part No 150612190 Pin , Cat Part No 700003032 O Ring , Cat Part No 123107 Washer , Cat Part No 43828 Clamp Hose , Cat Part No AR32241944 Connection Fuel Drain , Cat Part No 1540314421 Spring , Cat Part No S962E Cock drain , Cat Part No 147901 Seal Cap Filter , Cat Part No 1547011140 Bolt , Cat Part No 173368 Seal , Cat Part No 158139 Element Filter , Cat Part No 1546012170 Element Filter , Cat Part No 186780 Seal , Cat Part No 164159 O Ring Cover , Cat Part No 61-1-61-VAL-10X467 Poppet , Cat Part No 61-1-61-VAL-357197X91 Elbow with O ring , Cat Part No 61-1-61-VAL-10X0480 Hand Pump Seal Kit , Cat Part No 61- 1-61-VAL-357197X91 Elbow , Cat Part No 61-1-61-VAL- 3H0150 Pump Control Bkt assy RH , Cat Part No 61-1-61- VAL-3H0151 Pump Control Bkt assy LH , Cat Part No 61-1- 61-VAL-3H0803 Auxiliary Cable , Cat Part No 61-1-61-VAL- 13B0225 Special Bolt Door , Cat Part No 61-1-61-VAL-RELAY Relay , Cat Part No 61-1-61-VAL-10X454 Element , Cat Part No 61-1-61-VAL-3H0769 Hose Assy , Cat Part No 61-1-61- VAL-3H0725 Hose Assy , Cat Part No 61-1-61-VAL-10X985 Cup Bearing , Cat Part No 02-800772 Fan Belt , Cat Part No 02-800774 V belt Pair , Cat Part No 02-800960 Fan Belt , Cat Part No 750111056 Shaft Seal , Cat Part No 581-00012 Filter Element , Cat Part No 696-00442 Bush , Cat Part No 730-01041 Relay 12V , Cat Part No 04-800153 Seal , Cat Part No 04-800277 Backing Plate , Cat Part No 04-800288 Outer Piston Seal