Cable Tenders

Details: Description:- Provision & Fittment Of Movable Trolly ( Along With Wheels And Grabing Handle ) For ratchetsetassemblyalongwithfitmentencloser&jumperplugassemblyaspertermsand conditions. Size (l*h*b) Of The Trolly Should Be As Per Drawing Enclosed And Actual Site Requirement to The Complete Satisfaction Of Railway Site Engineer. Note: Ratchet & Iv Coupler Along With Cables would Be Supplied By Railways.

Details: Description:- Supply Of Multi Section Digital Axle Counter (msdac) For Mentioned Detection Point By the Purchased & Track Section As Per Sip, Complete With All Accessories, Cable Required With Each Track device & Card Viz. Axle Detectors, Track Side Electronics/dac Field Units, Central Evaluator (central evaluator Unit Should Be Housed In A Pre-fabricated Rack To Be Supplied Along With The System), Reset unit, Relay Unit, Event Logger & Diagnostic Terminals, Etc. Required For Different Detection Points & tracksectionsasperrdsospecificationsno.rdso/spn/176/2013,ver.3orlatestandoem/ manufacturer's Specification And As Per Annexures. (quantity 01 No. = 01 Dp) Inspection Authority: rdso. Note:- As Per Wr's Policy No 03/2024 Para No. 3.4.2 .e .iv "vdu/reset Box Can Be Used For resetting. At Stations Having More Than 10 Track Sections, The Railway Propose To Use A Separate Vdu- based Resetting System. Such A Vdu-based System If Using A Pc, It Must Be Industrial Grade".

Details: Running Works Contract for Erection, Maintenance and Dismantling of Electrical Networks including Capital and Improvement works and Maintenance of 110KV, 33KV Substations (OH lines and UG Cables including Sub-Station Maintenance) of AEE/O&M/Rural/South Kanchipuram Sub-Division in South Division in Kanchipuram EDC for a period of ONE YEAR

Description: Qty- 150 Mt (approx) Scrap Ferrous Material, Consisting Of Released Unserviceable Wagon Items Like Panels, Wagon Doors, Side Or End Body Portions, Underframe Portions And Structure Materials Etc. These May Be Mixed With P.way Scrap Materials E.g. Rails, Sleepers Etc. Which Are To Be Segregated And Not To Be Taken For Disposal. Above Scrap Are Lying On The Ground, As Well As Under Debris/heaps, Among Vegetation/shurbs Etc. Purchasers Are Allowed To Dig The Heaps, Pull/shift Scrap Items Up To The Road Vehicle Using Jcb/excavator/hydra Etc., Segregate The Items, Cut The Ferrous Scrap If Desirable, Lift And Shift The Scrap Material To Gsd/raipur For Weighment. Purchasers Have To Collect And Dispose The Scrap Material From The Locations In Same Order As Mentioned, I.e. Dispose All Scrap From Location (i) First And Then From Location(ii), Until 150 Mt Quantity Is Disposed. Nb: (i) Purchasers Are Not Allowed To Lift Any P.way Scrap Material E.g. Rails, Sleepers, Etc. (2) Weighment Of The Scrap Material Shall Be Taken At Gsd/r For Delivery Purpose. (3) The Offered Scraps Is On "as In Where Is" Basis. Bidders Are Advised To Visit The Site First, For Assessment Of Work. (4) As Locations Are Inside The Workshop, All Factory Safety Procedures Regarding Gas Cutting, Material Handling Are To Be Followed. (5) Site Involves Underground 415 V Electrical Cables, Due Care Should Be Taken To Not Damage Them.

Description: CATEGORY: MS Angle iron 75x75x8mm V1 , MS Angle iron 75x75x8mm V2 , MS Angle iron 75x75x8mm V3 , MS Angle iron 65x65x6mm H1 , MS Angle iron 65x65x6mm H2 , MS Angle iron 65x65x6mm H3 , MS Angle iron 65x65x6mm H4 , MS Angle iron 65x65x6mm H5 , MS Angle iron 65x65x6mm H6 , MS Angle iron 65x65x6mm H7 , MS Angle iron 65x65x8mm B1 , MS Angle iron 65x65x8mm B2 , MS Angle iron 65x65x8mm B3 , Truss and tie beams 40mmx40mmx6mm , Purlins 40mmx40mmx6mm , MS Angle iron 40x40x6mm , MS 8mm angle thick chequered steel , Cladding of 4mm , Roof coverig thick 0 dot 63 , Foundation bolt 25mm , MS Plate 600x600x6mm , Staircase , Cement Bag , Sand , Graded Stone Aggregate 40 63mm , Graded Stone Aggregate 40mm , Graded Stone Aggregate 20mm , Synthetic enamel Paints OG , Thinner , Wood primer , Red Oxide Zinc dhromate , Brush 50mm , Brush 75mm , TMT bar 8 mm dia , TMT bar 12 mm dia , TMT bar 10 mm dia , PCC kerb stone 300mm x 230mm x 250mm , Main Swich 32 Amp , MCB DP 32 Amps , Security light LED , 5 Pin 15 Amps switch socket combination with PVC , 5 Pin 5 Amps switch socket combination with PVC , Wire PVC insulate cable 1 dot 5 sqmm , Wire PVC insulate cable 10 sqmm , PVC casing capping 20mm , Twin flat parallel flat , Wall mounting fan 450mm sweep , 2 x 40mm OD pipe 4ft long , PVC insulated tape 20mm , Mega phone 215 AM 20 w , GI earthing plate 600x600x6mm , Common Salt , Charcoal , GI wire 4mm 8 SWG , CI cover 5mm thick 300x300mm , GI funnel with wire mesh , AI strip 25x3mm , GI strip 25x3mm , Screw steel full therded 25mm pkt 100 NOS , Screw steel full therded 32mm pkt 100 NOS , GI Pipe 20mm dia 6 ft long light grade , GI Pipe 50mm dia 6 ft long medium grade , Air termination with base and aluminium rod 12mm , Testing point terminal block and phosphorus bronze 75x75xx25mm , Aluminium Strip 25 x 3 dot 0mm , Galvanized Iron Strip 32 x 6mm , Funnel Fitted with 20mm dia , Earthing plate 600 x 600 x 6 mm , CI earth pit cover of size 300 x 300 x 6 mm , Salt normal , Insulating PVC block 75x75x30 mm , Weapons Platform , Stool , Hot Air Blower 2500W , Solar LED Street Light 30W , LED Dragon Light 25W , Drill Bit 9 oblique 64 inch , Drill Bit 1 oblique 8 inch , Hammer 500gm , Set of four Spanner , Trawler Wooden , Screw Driver 12 inch

Description: Scrap Condemned Coach Components Of All Sorts/sizes/shapes Of Dented/damaged/rusted/condemned/rejected/obsolete/unserviceable/non-moving Items Of Couplers, Lever Hanger Pins, Cp Pins, Brake Hanger Brackets, Brake Support, Shock Absorbers, Vertical Dampers, Bogie Support Frames For Bolster, Window Strut Assemblies, Base Plates, Stiffeners, Under Frame Kit Item, Doors/door Sets, Side Bearers, Front/rear Covers, Draw Hooks, Draft Keys, Screw Couplings, Pin Sets, Levers, Lever Inner & Outer, Axle Box Housings, Collars, Buffers, Collar Retaining Rings, Intermediate Tubes, Couplers, Transom Complete, Lhb Coach Components, Support For Upper Bearings, Sockets, Centre Sills, Locking Plates, Flats, Tread Plates, Rain Water Gutters, Steel Casting Housings, Rear Stopper Assy, Cable Trays, Latches, Spacers, Silent Block, Injection Molded Silent Blocks, Mesh, Cross Bearer, Housings, Control Arm, Coupler Items, Traction Frames, Cross Worthy, Roof Ventilators, Guide, Brake Beam Inner & Outer, Hand Brake Steel Bushes, Lifting Pad Assy, Pillar For Semi Bulk Head Partitions, Part Pillars, Housing Assy, Trough & Framing Arrangements, Housing Steel Castings, Safety Straps, Cattle Guards, Centering Disc With Or Without Ss Attachments, Chains, Pins, Frames, Base Frames, Louver Frames, Cross Members, Expanded Metal Frames, Frame Assy, Modular Frames, Brackets, Anchor Link Bkt, Emergency Lamp Bkt, Bkt For Vertical Dampers, Fan Bkt, Berth Suspension Bkt, Bkt For Ls Beam, Bkt For Wire Rope, Nose Suspension Bkt, Fixing Bkt, Bkt Assy, Plates, Channels, Channel For Vestibules, Angles, Chair Angles, Hardware Items. Any Other Items Of Above Nature Which Is Unusable To Icf. Location: 1). Bin No: 56 Note:1)there Is No Guarantee For Quality And Quantity Of The Materials Available In The Lot. 2. Gst 18%, Any Variation In Tax Or Any Other Extra Charges As Imposed By Central Or State Government Will Be To Buyer¿s Account. Ul No- 09 9841 7411 1314. Hsn Code: - 720429.

Description: CATEGORY: Gasket, Rear axle shaft LC , UJ Kit , Motor and Bracket assy wiper , Kit lining set 90MM , WC Assy FR RH WBS , WC Assy FR LH WOBS , WC Assy RR RH WBS , WC ASSY RR LH WOBS , BRACKET R oblique C LAMP , Head light assembly 12V LH , Water pump , Radiator Fan , Tensioner assembly , Front hub bearing , Oil pump assembly , Tail lamp assembly , Side indicator LH and RH , Centre bearing assembly , Lamp RR combination LH , Power Cylinder Bill , Kit lock assy , Stay and mirror assy Side , Gear box bushing kit , Kit end assy tie rod and drag link , Kit master cylinder minor , Clutch Disc Assy 275 , Clutch Cover Assy , Eicher premium coolant , Bushing rubber , Grommet , Oil seal hub front wheel , Oil seal Outer , Cable battery , Oil seal hub wheel inner , Pedal Assy brake , Wiper arm and Blade RHD , Cushion centre bearing , Centre bearing and P-shaft , Gasket rocker cover , Cushion rubber front , Pin split 5.0x50.0 , Washer internal , Element kit oil filter , By pass filter , Element, fuel filter E 483 , Water separator , WC Kit FR LH FR RH , WC Kit RR LH oblique FR RH , WC assy FR LH WBS , King pin kit , Element air cleaner E483TCI , Safety Cartridge and air cleaner E483TCI , Eicher premium power steering Oil , Eicher premium MP3 Grease , Brake Oil DOT4 , Eicher premium transmission Oil 209 , Eicher Premium Differential Oil 209 , Denting and Painting of Vehicle part or full body in work shop including replacement of rusted M S sheet as given in technical specification , Labour charge for complete servicing and replacement of parts

Description: CATEGORY: front and rear spring bush steel , front jumping rod bush , front and rear shocker bush , front wheel bearing inner and outer , front wheel oil seal , front wheel axle cross , air filter , diesel filter , U J cross , tie rod end , hand brake cable complete , d cloth , grease , brake fluid , steering shocker , coolant , steering bolt No19 , engine fan belt , steering pump belt , front steering sheild , front lock cylinder assembly RH for door , dalla handle cover , MS rod , welding rod , side mirror RH LH , rear mud guard matt , MS angle 40x6 , MS pipe 1 inch x 2 inch , MS round pipe 1 1 4 inch , MS angle 1 x1 inch , TVS nut and bolt 12 No , Hings 3 inch , MS wire mesh 4x12 inch , MS flat 1x1 inch , wiper blade , T horn , parking light assembly right left , 4 pin relay , bulb 67 No , bulb 1016 No , bulb 1141 No. , number plate light assembly , bar light with amplifire complete , insulation tape , side indicator assembly , hooter , fog light , PP switch , LT wire , Aspa paint , Aspa black dull , NC thinner , NC putty super link , surfacer , water paper No220 , water paper No400 , water paper No600 , paper tape , T P oil , hood tarpal , transparent sheet plastic , black thread , hood magzi , ZIP , rivits , zip starter , rubber matting , foot matting , carpet matting , solution , leather foam , ball dorrie , sheet ring packing , body filler , emergy paper 80 No , hood buckle , front bumper , window card board , window card board clip , front center bolt , Front and rear spring bush small , aluminium patti , steel screw

Description: CATEGORY: X2-MG19-DYNAF-4237-001-002-87 Diode 4148 , X2-MG19- DYNAF-4567-115-201-39 Fuse Resistence Type-2A , X2- MG19-DYNAF-7-24-116-07 Lock Washer Spring M4 , X2- MG19-DYNAF-3-63-014-00 Lamp Bulb 2W , X2-MG19-DYNAF- 3-91-151-07 X2 Insulator M8 Electrical , X2-MG19-DYNAF- 4567-115-202-36 Fuse Resistence Type 4A , X2-MG19- DYNAF-3-13-015-07 End Plate , X2-MG19-DYNAF-3842-182- 301-54 Cover , X2-MISC-2125-289-701-67 Magnetic Trip Relay , X2-MISC-MG-6-49-304-07 Nut Lock Loctite No 242 Bulb 100 ML DR , X2-MG19-DYNAF-6145-020423 Wire PTFE 133 oblique 0.28 W dollar 8 , X2-MG19-5605-140-601-05 Sealant Universal Pipe Loctite No 577 50 ML , X3-MG19- DYNAF-1-45-002-07 Chain , X3-MG19-DYNAF-2-46-054-07 Coupling R3 oblique 8 M16 X 1.5 , X3-MG19-DYNAF-N-020- 353-17 Injector Overflow Pipe 3.5X2MM L is equal to 260MM 1 Set of 5 Pcs , X3-MG19-DYNAF-7-00-073-00 Banjo Bolt , X3-MG19-DYNAF-7-00-216-08 Cable Tie , X3-MG19-DYNAF- N-012-241-10 Spring Washer

Description: CATEGORY: Trial bore of 200 mm dia upto 200 mtr depth below ground level including pea gravels for packing , Reaming upto 400 mm 16 inches bore hole incl UPVC casing pipe of 200 mm , Additional cost for slotted pipe of 200 mm dia , Development of tube well by means of pumping by air compressor of minimum pressure Kg CM2 , Yield test for the bore well by continuously pumping for 16 hrs to determine , Material and labour for foundation for holding tube well assembly of size 0 point 5 mtr into 0 point 5 mtr at ground level made , Chemical bacteriological analysis and potability test of water obtained from bore well from approved lab , Material and labour for lowering of submiersible pump of any capacity and make in bore well with PVC column pipe , Supply comma install comma testing and commissioning submersible pump set electric driven motor of 5 HP oblique 4 KW , Supply and Fix PVC insulated flat submersible cable with copper conductor 3 core 2 point 5 sqmm , Fully automatic DOL starter suitable for 5 HP submersible pump set 415 V 3 Ph supply complete fixed on wall , Excavation in trenches not exceeding 1 point 5 meter wide and not exceeding 1 point 5 m in depth for laying taking , Returning filling in trenches including spreading levelling watering and well ramming in layers not exceeding 25 cms , Removal of excavated material and deposited where directed at a distance not more than 50m , Supply and fix unplasticised PVC pipes of 50mm dia with pressure rating 10 Kgf oblique cm2 fixed complete to walls , Supply and fixing of UPVC ball valve of 50mm dia 2 inch , Supply and fixing of SS wire rop 6mm dia , Supply and fixing of CI adopter set 50mm dia , Supply and fixing of GI band 50mm plus cuplin , Supply and fixing of 50mm MS clamp , Supply and fixing of bore cap , Supply and fixing of clamp for wire rop