Bridge Tenders

Description: Condemned Unreleased Steel Structural Member And Scrap C I Sheet Of Col No J9 - S9 To J9, K6-s6 Of Press/smithy/hammers Section Shed [sl-25], Qty- Scrap Steel- 177.539 Mt, Scrap Ci Sheet - 9.990 Mt, Total 187.529 Mt. Above Mentioned Condemned Structure Are Offered Excluding Brick Works And Wooden Works. Free Delivery Period [fdp] For This Lot Has Been Fixed As 80 [eighty] Days. Condition-1] Dismantling Work Of Sold Structure Is To Be Done By The Purchaser On His Own Arrangement By Providing Tools, Safety Gears, Machinery And Labour Required For The Purpose, 2] Purchaser Should Ensure To Keep A Safety Banner Around The Work Spot, 3] Any Loss / Damage That May Arise During Dismantling Work Due To Accident Etc, Shall Be The Sole Responsibility Of The Purchaser And No Claim On This Account Will Be Entertained By The Railways Under Any Circumstances, 4] Dismantling Of The Sold Lot Is Allowed Only Up To The Ground Level Of The Condemned Structures, 5] Dismantling Of The Condemned Structures [sold Lot] Will Take Place In Presence Of Engg. Officials. 6] Purchaser Shall Ensure That Dismantling Work Does Not Affect Or Endanger Safety Of Life And Property In Near Vicinity, 7] No Explosives Can Be Used For Demolishing, 8] If Any Loose Ferrous , Non-ferrous Or Machine Found Inside The Structure During Delivery , The Same Is Required To Be Handed Over To The Respective Custodian, 9] Materials Will Be Sold On "as Is Where Is" Basis , 10] Delivery Will Be Done On Actual Weighment Basis, Rly. Weigh Bridge Is Available At Bscl Premises For Weighment.

Description: Condemned Unreleased Steel Structural Member And Scrap C I Sheet Of Col No J21 - S21 To J15 - S15 [excluding Col J15- S15] Of Press/smithy/hammers Section Shed [sl-25], Qty- Scrap Steel- 352 Mt, Scrap Ci Sheet - 20 Mt, Total 372 Mt. Above Mentioned Condemned Structure Are Offered Excluding Brick Works And Wooden Works. Free Delivery Period [fdp] For This Lot Has Been Fixed As 80 [eighty] Days. Condition-1] Dismantling Work Of Sold Structure Is To Be Done By The Purchaser On His Own Arrangement By Providing Tools, Safety Gears, Machinery And Labour Required For The Purpose, 2] Purchaser Should Ensure To Keep A Safety Banner Around The Work Spot, 3] Any Loss / Damage That May Arise During Dismantling Work Due To Accident Etc, Shall Be The Sole Responsibility Of The Purchaser And No Claim On This Account Will Be Entertained By The Railways Under Any Circumstances, 4] Dismantling Of The Sold Lot Is Allowed Only Up To The Ground Level Of The Condemned Structures, 5] Dismantling Of The Condemned Structures [sold Lot] Will Take Place In Presence Of Engg. Officials. 6] Purchaser Shall Ensure That Dismantling Work Does Not Affect Or Endanger Safety Of Life And Property In Near Vicinity, 7] No Explosives Can Be Used For Demolishing, 8] If Any Loose Ferrous , Non-ferrous Or Machine Found Inside The Structure During Delivery , The Same Is Required To Be Handed Over To The Respective Custodian, 9] Materials Will Be Sold On "as Is Where Is" Basis , 10] Delivery Will Be Done On Actual Weighment Basis, Rly. Weigh Bridge Is Available At Bscl Premises For Weighment.

Details: Electrical Arrangements For- [1] Proposed Construction Of Type -ii Quarters In Lieu Of Qrts No.10/a-d, 12, 13, 20/a-b (8 Units) At Bidadi (bid), [2] Yelahanka (ynk)-provision Of Parcel Office, Parcel Stacking Shed, Tc Office And Sec. Cmi Room, [3] Construction Of Foot Over Bridge (fob) At Tyakal (tcl ) Station (4 Track Crossing), And [4] Shravanabelagola (sbga)- Proposed Construction Of Platform Toilet At Pf-1 Of Sbga Station In Aden/kigl Sub-division And [5] Provision Of Pay & Use Toilet At Chickbanawar (baw) Station [6] Improvements To Road-5 Loading And Unloading Area At Settihalli (set) From Km 62/300-900 And Construction Of Merchant Room At Settihalli Yard

Description: P.l. No.98051301 Condemned And Unserviceable Ferrous With Aluminium Attachments Scrap Consisting Of Aluminium Water Tank Gi Elbows / Inlet Pipes With / Without Nylon Hose , Rotors With / Without End Shields, Chokes Of Tube Lights ,pw Trolley Wheel Sets / Axles / Parts, Aluminium Caps Of Tube Lights And Filament Lamps With / With Out Glass , Filaments And Other Orginal Attachments , Ferrous Cores Released From Feild Coils Of Traction Motors ,ceiling Fan Rotor Core , Wra Compressors , Pistons With Connecting Rods ,solar Panels,terminal/junction Boxes, Reflectors Of Light Fittings, Mechanisms Of Circuit Breakers With Porcelain Bushings, Pipes / Hoses Of Ferrous Or Pvc / Pipe Fittings With / Without Wires / Cables, Lock Levers Of Covers, Signal Arms, Parts Of Medical Eqiuipments, Oil Engine Parts, Filters (oil/air), Gauges / Levels, Wire Ropes, Rectifier Cum Regulator Boxes, Sign Boards, Cross Arms, Fabricated Boxes / Plates / Sheets, Dust Bins, Fuse Distribution Boards, Eft Boxes, Panel Boards, Control Gears, Clevis, Lamp Fittings, Turbo Charger With Turbine Blades, Dental Chair, Wiper Blade, Loco / Lavatory Doors, Window Frames Of Sorts And Sizes And Other Similar Engineering / C & W / Loco / Electrical / Signal/medical Components Ferrous In Nature With Aluminium / Brass / Copper / Stainless Steel / Fibre / Wood / Hylam / Plastic / Pvc / Rubber / Mica /electrical Wires/cables/ Glass Attachments In Full / Part / Broken Condition. As Is Where Is Basis. Segregation And Removal Attachements Not Permitted. Note:- 1) Material At Location North Of Tree No.13 To Be Cleared First. 2) Cssd/goc Electronic Weigh Bridge Can Be Used For Weighment. (3) Loading By Crane/jcb Is Permitted.

Description: CATEGORY: M 5 BOLT SS WITH NYLOC NUT , PLASTIC D SHACKLE 10 MM , D SHACKLE SS 14 MM , THREAD LOCKING ADHESIVE , BOW FENDER , BRIDGE PLATE SS WITH NUT BOLT AND WASHER SIZE 75X50X02 MM , NYLOC NUT BOLT M 6 WITH WASHER , DENDRITE RUBBER GUM SIZE 01 KG , SCREW SS SIZE 1 INCH , SCREW SS SIZE 3BY4 INCH , LUG PIN TYPE HEX 25 SQ MM , BATTERY CLIPS 16 AMPS , RUBBER BEADING FOR INSPECTION HATCH , CUTTING WHEEL , GRINDING WHEEL ALUMINIUM OXIDE , GRINDING WHEEL SILICON CARBIDE , HACKSAW BLADE 1 BY 2 INCH , M 16 NUTS AND BOLT WITH WASHERS , M 10 NUTS AND BOLT WITH WASHERS SS , M 8 BOLT SS WITH NYLOC NUT , LUG RING TYPE NEX 4 POINT 6 SQ MM , LUG RING TYPE HEX 10 SQ MM , LUG RING TYPE HEX 16 SQ MM , LUG RING TYPE HEX 25 SQ MM 35 SQ MM , LUG RING TYPE HEX 18 SQ MM , LUG PIPE CONNECTOR 10 SQ MM , LUG PIN TYPE HEX 1 SQ MM , LUG PIN TYPE HEX 2 POINT 5 SQ MM , LUG RING TYPE HEX 25 SQ MM , LUG RING TYPE HEX 2 POINT 5 SQ MM , O RING KIT , LUG SNAP TYPE FEMALE HEX 1 POINT 5 SQ MM , LUG RING TYPE HEX 6 POINT 4 SQ MM , LUG RING TYPE HEX 1 POINT 5 SQ MM

Description: Condemned Unreleased Steel Structural Member And Scrap C I Sheet Of Col No J15 - S15 To J9 - S9 [excluding Col J9- S9] Of Press/smithy/hammers Section Shed [sl-25], Qty- Scrap Steel- 352 Mt, Scrap Ci Sheet - 20 Mt, Total 372 Mt. Above Mentioned Condemned Structure Are Offered Excluding Brick Works And Wooden Works. Free Delivery Period [fdp] For This Lot Has Been Fixed As 80 [eighty] Days. Condition-1] Dismantling Work Of Sold Structure Is To Be Done By The Purchaser On His Own Arrangement By Providing Tools, Safety Gears, Machinery And Labour Required For The Purpose, 2] Purchaser Should Ensure To Keep A Safety Banner Around The Work Spot, 3] Any Loss / Damage That May Arise During Dismantling Work Due To Accident Etc, Shall Be The Sole Responsibility Of The Purchaser And No Claim On This Account Will Be Entertained By The Railways Under Any Circumstances, 4] Dismantling Of The Sold Lot Is Allowed Only Up To The Ground Level Of The Condemned Structures, 5] Dismantling Of The Condemned Structures [sold Lot] Will Take Place In Presence Of Engg. Officials. 6] Purchaser Shall Ensure That Dismantling Work Does Not Affect Or Endanger Safety Of Life And Property In Near Vicinity, 7] No Explosives Can Be Used For Demolishing, 8] If Any Loose Ferrous , Non-ferrous Or Machine Found Inside The Structure During Delivery , The Same Is Required To Be Handed Over To The Respective Custodian, 9] Materials Will Be Sold On "as Is Where Is" Basis , 10] Delivery Will Be Done On Actual Weighment Basis, Rly. Weigh Bridge Is Available At Bscl Premises For Weighment.

Description: Condemned Unreleased Steel Structural Member And Scrap Gi Sheet Of Col No J32 - M32 To J37 - M37[excluding Col J37- M37] Of Turning And Fitting Section Shed [ Sl No- 26 ], Qty- Scrap Steel- 405 Mt, Scrap Cgi Sheet -30.5mt, Total 435.5 Mt. Above Mentioned Condemned Structure Are Offered Excluding Brick Works And Wooden Works. Free Delivery Period [fdp] For This Lot Has Been Fixed As 80 [eighty] Days. Condition-1] Dismantling Work Of Sold Structure Is To Be Done By The Purchaser On His Own Arrangement By Providing Tools, Safety Gears, Machinery And Labour Required For The Purpose, 2] Purchaser Should Ensure To Keep A Safety Banner Around The Work Spot, 3] Any Loss / Damage That May Arise During Dismantling Work Due To Accident Etc, Shall Be The Sole Responsibility Of The Purchaser And No Claim On This Account Will Be Entertained By The Railways Under Any Circumstances, 4] Dismantling Of The Sold Lot Is Allowed Only Up To The Ground Level Of The Condemned Structures, 5] Dismantling Of The Condemned Structures [sold Lot] Will Take Place In Presence Of Engg. Officials. 6] Purchaser Shall Ensure That Dismantling Work Does Not Affect Or Endanger Safety Of Life And Property In Near Vicinity, 7] No Explosives Can Be Used For Demolishing, 8] If Any Loose Ferrous , Non-ferrous Or Machine Found Inside The Structure During Delivery , The Same Is Required To Be Handed Over To The Respective Custodian, 9] Materials Will Be Sold On "as Is Where Is" Basis , 10] Delivery Will Be Done On Actual Weighment Basis, Rly. Weigh Bridge Is Available At Bscl Premises For Weighment.

Description: Condemned Unreleased Steel Structural Member And Scrap Gi Sheet Of Col No J27 - M27 To J32 - M32 [excluding Col J32- M32] Of Turning And Fitting Section Shed [ Sl No- 26 ], Qty- Scrap Steel- 405 Mt, Scrap Cgi Sheet - 30.5mt, Total 435.5 Mt. Above Mentioned Condemned Structure Are Offered Excluding Brick Works And Wooden Works. Free Delivery Period [fdp] For This Lot Has Been Fixed As 80 [eighty] Days. Condition-1] Dismantling Work Of Sold Structure Is To Be Done By The Purchaser On His Own Arrangement By Providing Tools, Safety Gears, Machinery And Labour Required For The Purpose, 2] Purchaser Should Ensure To Keep A Safety Banner Around The Work Spot, 3] Any Loss / Damage That May Arise During Dismantling Work Due To Accident Etc, Shall Be The Sole Responsibility Of The Purchaser And No Claim On This Account Will Be Entertained By The Railways Under Any Circumstances, 4] Dismantling Of The Sold Lot Is Allowed Only Up To The Ground Level Of The Condemned Structures, 5] Dismantling Of The Condemned Structures [sold Lot] Will Take Place In Presence Of Engg. Officials. 6] Purchaser Shall Ensure That Dismantling Work Does Not Affect Or Endanger Safety Of Life And Property In Near Vicinity, 7] No Explosives Can Be Used For Demolishing, 8] If Any Loose Ferrous , Non-ferrous Or Machine Found Inside The Structure During Delivery , The Same Is Required To Be Handed Over To The Respective Custodian, 9] Materials Will Be Sold On "as Is Where Is" Basis , 10] Delivery Will Be Done On Actual Weighment Basis, Rly. Weigh Bridge Is Available At Bscl Premises For Weighment.

Details: Consultancy Services For Dpr Preparation For Widening To 2-lane With Paved Shoulder From Km 0.00 To 41 Of Nh-133a In The State Of Jharkhand On Epc Mode Including Bridges, Land Acquisition, Forest Clearance And Utility Shifting Etc.

Description: Construction Of Side Pathway In Steel Girder Bridges In Br. No. 4 (1 X 30.5m), 6 (1 X 45.7m), 20bac (1 X 45.7m), 75 (1 X 30.5m) In Hwh-src-amz Section, In Br. No. 168up (1 X 12.2m + 3 X 30.5m), 48sl (2 X 30.5m), 105sl (3 X 30.5m) Of Kgp- rop-rjkl Section, Br. No. 30sl (1 X 30.5m), 35sl (1 X 30.5m), 85sl (1 X 45.7m), 110sl (1 X 30.5m), 129sl (2 X 12.2m Psc + 1 X 30.5m), 135sl (1 X 45.7m), 160sl (1 X 45.7m) Of Tmz-dgha Section And Ror-5 (1 X 30.5), Ror-2 (1 X 45.7m) & 133a Ror (1 X 14.7m) In Kgp-nmp-tata Section Under Axen/brl/kgp.