Rural Works Department Tender
... More
With BidAssist, you can search for multiple business options for RWD Bihar tenders, RCD Bihar tenders, and any other e tender Bihar government is inviting bids for. Such Bihar tenders are posted on the eprocurement Bihar website, and on this page, you will get consolidated lists of Bihar tenders that can be sorted based on authority, department, city, and more.
Technical
Technical
Financial
Additional Eligibility
Technical Capacity
... View More
The required prior work experience for the bidder is not explicitly mentioned, but it is stated that the bidder should have experience as a prime contractor, subcontractor, or in a similar capacity, with a total monetary value of turnover and civil construction works performed for each of the last five years. The bidder should have experience in construction works of similar value over the last five years, with certificates from concerned officers not below the rank of Executive Engineer or equivalent. The value and percentage of similar works completed are not explicitly mentioned. However, several packages are mentioned with their respective values and percentages, including:
- MGSY/24-25/Rosera/01 with a value of 1636.692 and a percentage of 26.367
- MGSY/24-25/Bikramganj/03 with a value of 619.122 and a percentage of 12.382
- MGSY/24-25/Nawada/02 with a value of 688.367 and a percentage of 13.767
- MGSY/24-25/Nawada/03 with a value of 444.298 and a percentage of 8.886
- MGSY/24-25/Biharsharif/03 with a value of 461.124 and a percentage of 9.222
- MGSY/24-25/Patna/02 with a value of 620.217 and a percentage of 12.404
- MGSY/24-25/Chakia/01 with a value of 1316.175 and a percentage of 23.162
- MGSY/24-25/Khagaria/01 with a value of 2481.292 and no percentage mentioned It is also mentioned that proposals for subcontracting components of the construction of roads and bridges, aggregating not more than 25 percent of the contract price, are allowed. The bidder should have a maximum value of civil engineering works executed in any year during the last five financial years, updated to the price level of the current financial year. The bidder's experience will be evaluated based on the "Number of years prescribed for completion of Construction of road bridge" and the "Value at the current price level of existing commitments and ongoing works". The bidder should have a minimum earnest money deposited, which varies depending on the estimated cost of the work, with a minimum of 2% of the total estimated cost for works costing up to 10 crores, and Rs. 20 lakhs plus 1% of the excess cost over 10 crores for works costing more than 10 crores.
Costs
EMD
₹ 6,26,700Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_RWD_141465_1Tender No
MGSY/24-25/Harnaut/03Tender Authority
Rural Works Department ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Cement Concrete for Reinforced Concrete M - 35 in Pile Cap complete as per Drawing and Technical Specification
39.92
6234
-
... More
Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications.
0.24
63781
-
... More
Plain/Reinforced Cement Concrete in Structure complete as per Drawing and Technical Specifications. PCC M-20
26.44
6234
-
... More
Providing Weep Holes in Abutment Cap with 100mm dia AC Pipe:-- Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications.
66
138
-
... More
Plain/Reinforced Cement Concrete in Structure complete as per Drawing and Technical Specifications. RCC M-30
23.55
6780
-
... More
Supplying, fitting and placing HYSD Bar reinforcement in substructure complete as per Drawing and Technical Specification.
3.67
63781
-
... More
Back filling behind abutment, wing wall and return wall, complete as per Drawing and \technical Specification.(Sandy Material )
89.85
1428
-
... More
Plain/Reinforced Cement Concrete in Structure complete as per Drawing and Technical Specifications. RCC M-30
8.89
6780
-
... More
Providing HYSD Bar in all types of RCC work:-- Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications .
4.71
63781
-
... More
Plain/Reinforced Cement Concrete in Structure complete as per Drawing and Technical Specifications. (Parapet) PCC M-20
32.32
6234
-
... More
Providing Drainage spout:-- Drainage Spouts complete as per drawing and Technical specification
8
5080
-
... More
Providing PCC / RCC M30 in Approach Slab:-- Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification
9.12
2694
-
... More
Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation.
37.09
186
-
... More
Providing and applying two coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ IL per sq.m.
314
116
-
... More
Numbering & writing Bridge details with 2 coats of enamel paint of approved shade & make including cost of all materials, labour, tools etc. as per SOR Item 8.3
1.85
5746
-
... More
Providing and Painting of flood gauge on substructure to full height and 500mm wide including cost of all materials, labour, tools etc.
11.25
6234
-
... More
Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing
4
10436
-
... More
Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification.
36
2694
-
... More
Providing and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per Drawing & Technical Specifications. SOR Item-15.4A (Ref. MORTH CI.2504)
57.92
2694
-
... More
Providing and laying filter materials underneath pitching in slopes complete as per Drawing & Technical Specifications. SOR Item-15.5
28.96
2897
-
... More
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.
0.05
73254
-
... More
Construction of embankment with material obtained from borrow pits vide S.O.R. item No. 3.16 MOST CI. 305.
415.48
194
-
... More
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2
110.4
196
-
... More
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. (Grading-I)
43.65
2544
-
... More
Water Bound Macadam :- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. Grade - III
15.47
3357
-
... More
Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.
206.25
44
-
... More
Providing and applying Tack coat with bitumen emulsion as per T.S Clause 503 & Direction of E/I.
206.25
16
-
... More
Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509
206.25
212
-
... More
Providing boundary pillars and F.I Posts as per S.O.R. Item 8.16, MORTH CL. 806.
32
532
-
... More
ADD FOR LABOUR CESS @ 1%
1
25159
-
... More
ADD FOR GST @ 18%
1
464322
-
... More
ADD SEIGNIORAGE FEE
1
38458
-
... More
FIRST YEAR
1
6233
-
... More
SECOND YEAR
1
7115
-
... More
THIRD YEAR
1
9002
-
... More
FORTH YEAR
1
10218
-
... More
FIFTH YEAR
1
11436
-
... More
ADD FOR LABOUR CESS @ 1%
1
440
-
... More
ADD FOR GST @ 18%
1
8026
-
... More
ADD SEIGNIORAGE FEE
1
150
-
... More
YAMUNAPUR-KISMIRICHAK PATH SE BHAKHARI, BLOCK- NOORSARAI, DISTRICT- NALANDA
-
-
-
... More
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.a) Initial and routine load test
1750
300
-
... More
Pile Load Test on single Vertical Pile in accordance with IS:2911(Part-IV) including dynamic load test for its integrity , length & capacity b) Lateral load test
50
5000
-
... More
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Upto 3.000 M Depth
308.83
198
-
... More
Providing service road etc. all complete job as per specifications and direction of E/I.
22.4
4058
-
... More
Providing Steel Liner 6 mm thick for Piles including Fabricating and Setting out as per Detailed Drawing.
5.68
92761
-
... More
Bored cast-in-situ M35 grade R.C.C. Pile excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m.
352
14702
-
... More
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres(Extra Pile Length). Stripping off RCC M35 in the pile up to cut off level and disposal of debris with all leads and lifts.
149.16
1489
-
... More
Providing and laying of PCC M15 levelling course 100mm thick below the pile cap.
20.41
5354
-
... More
Cement Concrete for Reinforced Concrete M - 35 in Pile Cap complete as per Drawing and Technical Specification
225.83
6475
-
... More
Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications.
56.63
68306
-
... More
Providing RCC M-30 Mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of FM-2 …… All complete job as per design Upto 5 m Hieght
133.3
6771
-
... More
Supply Fitting & Fixing Elasto-Meric Bearing & seismic Pad :-- Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications. Elastomeric Bearing & Pad
110040
1
-
... More
Providing Weep Holes in Abutment Cap with 100mm dia AC Pipe:-- Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications.
144
138
-
... More
Supplying, fitting and placing HYSD Bar reinforcement in substructure complete as per Drawing and Technical Specification.
20.86
68519
-
... More
Back filling behind abutment, wing wall and return wall, complete as per Drawing and \technical Specification.(Sandy Material )
186.85
1428
-
... More
Providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in CI. 2504.22 of MORTH Specification of not less than 600mm behind abutment, wing and return wall to the full height compacted.
83.39
2666
-
... More
Providing RCC M-30 Mechanically mixed concrete in abutment Shaft cap and Pier Hammer Head with stone aggregate 20mm nominal size and clean coarse sand of F.M.-2 …………… .All complete job as per design/ Drawing/technical specification and direction of E/I. Beyond 5 m and upto 10m Hieght (T Beam Slab)
95.5
7651
-
... More
Providing HYSD Bar in all types of RCC work:-- Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications .
14.88
68731
-
... More
Wearing Coat :-- Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications
16.99
11456
-
... More
Providing RCC M30 Grade In Railing:-- Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
60.4
1893
-
... More
Providing Drainage spout:-- Drainage Spouts complete as per drawing and Technical specification
8
5080
-
... More
Providing PCC M15 grade Below Approach Slab:-- PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification
7.61
5354
-
... More
Providing PCC / RCC M30 in Approach Slab:-- Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification
17.75
9829
-
... More
Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation.
16.9
12600
-
... More
Providing and applying two coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ IL per sq.m.
826
116
-
... More
Numbering & writing Bridge details with 2 coats of enamel paint of approved shade & make including cost of all materials, labour, tools etc. as per SOR Item 8.3
3000
-
-
... More
Providing and Painting of flood gauge on substructure to full height and 500mm wide including cost of all materials, labour, tools etc.
1
5000
-
... More
Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing
4
10436
-
... More
Construction of embankment with material obtained from borrow pits vide S.O.R. item No. 3.16 MOST CI. 305.
1175.63
194
-
... More
Granular sub base Gr-I with close graded material as per MORTH CL. 401.
53.44
2561
-
... More
Laying Reinforced Cement Concrete Pipe NP3 / Prestressed Concrete Pipe on First Class Bedding .
15
7258
-
... More
Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification.
319.38
2708
-
... More
Providing and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per Drawing & Technical Specifications. SOR Item-15.4A (Ref. MORTH CI.2504)
448.97
2708
-
... More
Providing and laying filter materials underneath pitching in slopes complete as per Drawing & Technical Specifications. SOR Item-15.5
224.49
2912
-
... More
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.
0.2
73254
-
... More
Construction of embankment with material obtained from borrow pits vide S.O.R. item No. 3.16 MOST CI. 305.
5236.99
194
-
... More
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2
538.2
196
-
... More
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. (Grading-I)
169.2
2561
-
... More
Water Bound Macadam :- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. Grade - III
59.06
3375
-
... More
Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.
787.5
42
-
... More
Providing and applying Tack coat with bitumen emulsion as per T.S Clause 503 & Direction of E/I.
787.5
15
-
... More
Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509
787.5
213
-
... More
Providing boundary pillars and F.I Posts as per S.O.R. Item 8.16, MORTH CL. 806.
156
532
-
... More
ADD FOR LABOUR CESS @ 1%
1
231965
-
... More
ADD FOR GST @ 18%
1
4262061
-
... More
ADD SEIGNIORAGE FEE
1
249583
-
... More
FIRST YEAR
1
31133
-
... More
SECOND YEAR
1
38602
-
... More
THIRD YEAR
1
50995
-
... More
FORTH YEAR
1
56943
-
... More
FIFTH YEAR
1
69213
-
... More
ADD FOR LABOUR CESS @ 1%
1
2468
-
... More
ADD FOR GST @ 18%
1
45015
-
... More
ADD SEIGNIORAGE FEE
1
730
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%