Rural Works Department Tender
... More
The Rural Works Department has issued a formal invitation for competitive bids for Mgsy/24-25/hilsa/01 in Patna, Bihar, with an estimated contract value of Rs. 4,40,50,600. The bid opening date for this tender is 02-05-2025 and the last date for bid submission is 09-05-2025. Interested bidders for Rural Works Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Technical
Technical
Additional Eligibility
Bid Capacity
... View More
Assessed Available Bid capacity = ANMB
Technical Capacity
... View More
The bidder should have work experience as a prime contractor, in the same name and style, or as a subcontractor on construction works of similar nature and value over the last five years. The bidder should provide certificates from the concerned officer, not below the rank of Executive Engineer or equivalent, for the work performed. The bidder should provide information on the total monetary value of turnover and civil construction works performed for each of the last five years. However, the exact amount of work to be completed is not specified. The percentage of subcontracting components of the construction of roads and bridges is limited to 25 percent of the contract price. No other specific values or percentages for similar works completed are mentioned, except for this 25 percent subcontracting limit.
Costs
EMD
₹ 8,81,100Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_RWD_140802_1Bid Award Id
ViewTender No
MGSY/24-25/Hilsa/01Tender Authority
Rural Works Department ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. 1. Upto 3.000 M Depth
531.47
198
105454.28
... More
Providing service road etc. all complete job as per specifications and direction of E/I.
51.37
4058
208487.2
... More
Providing Steel Liner 6 mm thick for Piles including Fabricating and Setting out as per Detailed Drawing.
12.08
92761
1120557.11
... More
Bored cast-in-situ M35 grade R.C.C. Pile excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m.
608
14660
8913827.2
... More
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres(Extra Pile Length). Stripping off RCC M35 in the pile up to cut off level and disposal of debris with all leads and lifts.
19
1489
28294.8
... More
Providing and constructing temporary island 24m diameter for construction of Well foundation for 8m dia. Well. Assuming depth of water 1.0 m and height of island to be 1.25m including Royalty for earth for each island.
2
83629
167259.2
... More
Providing and laying of PCC M15 levelling course 100mm thick below the pile cap.
34.99
5317
186064.57
... More
Cement Concrete for Reinforced Concrete M - 35 in Pile Cap complete as per Drawing and Technical Specification
385.56
6439
2482755.79
... More
Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications.
90.79
68306
6201567.11
... More
Providing RCC M-30 Mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of FM-2 …… All complete job as per design.Upto 5 m Hieght
216.02
6734
1454845.02
... More
Supply Fitting & Fixing Elasto-Meric Bearing & seismic Pad :-- Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications. Elastomeric Bearing & Pad
330120
1
330120
... More
Providing Weep Holes in Abutment Cap with 100mm dia AC Pipe:-- Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications.
144
138
19962.72
... More
Supplying, fitting and placing HYSD Bar reinforcement in substructure complete as per Drawing and Technical Specification.
35.71
68519
2446828.85
... More
Back filling behind abutment, wing wall and return wall, complete as per Drawing and \technical Specification.(Sandy Material )
179.84
1428
256976.97
... More
Providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in CI. 2504.22 of MORTH Specification of not less than 600mm behind abutment, wing and return wall to the full height compacted.
80.26
2954
237149.84
... More
Providing RCC M 30 Grade & Super structure :-- Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification. Beyond 5 m and upto 10m Hieght (T Beam Slab)
183.6
7614
1398036.89
... More
Providing HYSD Bar in all types of RCC work:-- Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications .
31.12
68731
2138938.91
... More
Wearing Coat :-- Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications
33.28
11419
380056.6
... More
Providing RCC M30 Grade In Railing:-- Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
118.34
1889
223657.87
... More
Providing Drainage spout:-- Drainage Spouts complete as per drawing and Technical specification
24
5080
121935.36
... More
Providing PCC M15 grade Below Approach Slab:-- PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification
7.61
5317
40468.53
... More
Providing PCC / RCC M30 in Approach Slab:-- Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification
17.75
9792
173822.73
... More
Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation.
33.8
12600
425908.39
... More
Providing and applying two coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ IL per sq.m.
1619
116
188613.5
... More
Numbering & writing Bridge details with 2 coats of enamel paint of approved shade & make including cost of all materials, labour, tools etc. as per SOR Item 8.3
3000
-
2220
... More
Providing and Painting of flood gauge on substructure to full height and 500mm wide including cost of all materials, labour, tools etc.
1
5000
5000
... More
Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing
4
10426
41707.4
... More
Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification.
319.38
2984
953052.28
... More
Providing and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per Drawing & Technical Specifications. SOR Item-15.4A (Ref. MORTH CI.2504)
440.77
2984
1315288.53
... More
Providing and laying filter materials underneath pitching in slopes complete as per Drawing & Technical Specifications. SOR Item-15.5
220.39
3200
705422.11
... More
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.
0.31
73254
22708.86
... More
Construction of embankment with material obtained from borrow pits vide S.O.R. item No. 3.16 MOST CI. 305.
7606.97
194
1478414.62
... More
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2
828
196
162784.8
... More
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. (Grading-I)
254.25
2874
730745.01
... More
Water Bound Macadam :- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. Grade - III
88.59
3713
328961.25
... More
Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.
1181.25
42
50144.06
... More
Providing and applying Tack coat with bitumen emulsion as per T.S Clause 503 & Direction of E/I.
1181.25
15
18144
... More
Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509
1181.25
207
245664.56
... More
Providing boundary pillars and F.I Posts as per S.O.R. Item 8.16, MORTH CL. 806.
240
532
127893.6
... More
ADD FOR LABOUR CESS @ 1%
1
362147
362147.43
... More
ADD FOR GST @ 18%
1
6644444
6644444.84
... More
ADD SEIGNIORAGE FEE
1
336692
336692
... More
FIRST YEAR
1
51460
51460
... More
SECOND YEAR
1
64217
64217
... More
THIRD YEAR
1
85349
85349
... More
FORTH YEAR
1
94718
94718
... More
FIFTH YEAR
1
116447
116447
... More
ADD FOR LABOUR CESS @ 1%
1
4121
4121.91
... More
ADD FOR GST @ 18%
1
75138
75138.64
... More
ADD SEIGNIORAGE FEE
1
1124
1124
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements