Rural Works Department Tender
... More
With BidAssist, you can search for multiple business options for RWD Bihar tenders, RCD Bihar tenders, and any other e tender Bihar government is inviting bids for. Such Bihar tenders are posted on the eprocurement Bihar website, and on this page, you will get consolidated lists of Bihar tenders that can be sorted based on authority, department, city, and more.
Technical
Technical
Additional Eligibility
Bid Capacity
... View More
The formula for bid capacity is: Assessed Available Bid Capacity = ( A*N*M - B ) where A = Maximum value of civil engineering works executed in any one year during the last five years (updated to the price level of the last year at the rate of 8 percent a year) taking into account the completed as well as works in progress. N = Number of years prescribed for completion of the works for which bids are invited (period up to 6 months to be taken as ½ and more than 6 months as 1 in a year). M = 2 or such higher figure not exceeding 3 as may be specified. B = Value, at the current price level, of existing commitments and on-going works to be completed during the period of completion of the works for which bids are invited.
Technical Capacity
... View More
The required prior work experience for the bidder includes: - A Degree Holder in Civil Engineering with 15 years and above experience in Road Works.
- A Diploma Holder in Civil Engineering with 5+ years experience in Road Works.
- For field testing laboratory, 1 No. experience with a minimum of 5 years. The bidder must have completed similar works, but the exact value and percentage of similar works completed are not specified. However, the bid security amount is Rs. 7.61 Lakh, which is 2 percent of the estimated value of the works. Additionally, the bidder is required to have prior work experience, with specific details to be provided, including total annual volume of civil engineering construction work executed and payments received in the last five years preceding the year in which bids are invited, certified by a Chartered Accountant. The bidder can subcontract components of the works for construction/up-gradation, aggregating to not more than 25 percent of the contract price. No specific amount or percentage is mentioned for the similar works completed, except for the subcontracting limit of 25 percent of the contract price and the bid security amount of 2 percent of the estimated value of the works.
Costs
EMD
₹ 7,40,986Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_RWD_140438_1Bid Award Id
ViewTender No
BR37P3R24Tender Authority
Rural Works Department ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Excavation for Structures
-
-
-
... More
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.
-
-
-
... More
i) Upto 3m depth
439.05
412
181020.32
... More
Providing and laying of PCC M15 levelling course 100mm thick below the pile cap.
-
-
-
... More
PCC Grade M-15 (Levelling Course for Pile Cap)
21.87
7887
172507.72
... More
R.C.C. grade M 35 in Pile Cap Foundation complete as per Dwg & Tech Specification.
-
-
-
... More
Pile Cap in RCC M-35 (Using Batching Plant, Transit Mixer and Concrete Pump)
239.61
8993
2155014
... More
Bored cast-in-situ M35 grade R.C.C. Pile excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m.
-
-
-
... More
1200 mm Dia (Using Batching Plant, Transit Mixer and Concrete Pump)
384
17013
6533072.64
... More
Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202
59.91
68282
4090818.35
... More
Providing Steel liner 10 mm thick for curbs and 6mm thick for steining of wells including fabricating and setting out as per detailed drawing
5.28
92594
488896.48
... More
Providing and Constructing Temporary Earth Island (Assuming depth of water 1.0 m and height of island to be 1.25 m including Royality for earth
1
83629
83629.59
... More
Providing and constructing One Span Service Road to reach island location from one pier location to another pier location including Royality for earth
31.22
4058
126707.62
... More
Carrying out the Confirmatory Boring for Soil Investigation for foundation as per clause 2400 of MORT&H Specification.
75
1000
75000
... More
Carrying Out Load Test on any pile as per standard procedure laid down in the IS:2911 specification including construction of test cap, dismantling the cap after test and cleaning the site and maintaining complete records of load
-
-
-
... More
a) Initial Load Test on test pile for 2.5 times the design load specified in Drawings
-
-
-
... More
1.2 m Dia Pile
1
350000
350000
... More
b) Routine pile load test on pile for 1.5 times the design load specified in Drawings
-
-
-
... More
1.2 m Dia Pile (2% of piles in total).
1
150000
150000
... More
c) Horizontal pile load test on pile for 1.5 times the design load specified in Drawings
-
-
-
... More
1.2 m Dia Pile (2% of piles in total) .
1
100000
100000
... More
SUBSTRUCTURE
-
-
-
... More
R.C.C. grade M-35 in Substructure complete as per Dwg & Tech Specification
-
-
-
... More
RCC M-35 (Using Batching Plant, Transit Mixer and Concrete Pump)
-
-
-
... More
i) Upto 5m height (Using Batching Plant, Transit Mixer and Concrete Pump)
94.11
9428
887286.02
... More
ii) From 5m upto 10m height (Using Batching Plant, Transit Mixer and Concrete Pump)
31.34
9544
299110.84
... More
R.C.C. grade M-40 in Substructure complete as per Dwg & Tech Specification
-
-
-
... More
ii) From 5m upto 10m height (Using Batching Plant, Transit Mixer and Concrete Pump)
10.34
9678
100071.86
... More
Supplying, fitting and placing HYSD Bar Reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
17.45
68495
1195253.63
... More
Supplying, fitting and fixing in position true to line and level POT-PTFE Bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface, completre assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete asper drawing and approved technical specifications.
12
48594
583133.16
... More
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
116
233
27052.36
... More
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
-
-
-
... More
Sandy Material
158.47
4344
688518.87
... More
Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification Clause 1204.3.8
68.38
4833
330546.18
... More
SUPERSTRUCTURE
-
-
-
... More
Providing and laying RCC Grade M-35 in superstructure complete as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5
-
-
-
... More
ii) From 5m upto 10m height (Using Batching Plant, Transit Mixer and Concrete Pump)
135.03
10228
1381086.84
... More
Supplying, fitting and placing HYSD Bar Reinforcement (Fe 415) in superstructrue complete as per drawings and technical specification Clauses 1002, 1010 & 1202
33.91
68708
2329903.88
... More
Crash Barriers for Bridge (Height 950 mm) as per details given IRC-5 (fig.-3 ) (Surface Area 0.514 sqm. For 1 meter length ) M 40 grade concrete &HYSD steel reinforcment
86.6
4167
360911.56
... More
Providing, fitting and fixing mild steel railing complete as per drawing and Technical Specification
86.6
3420
296179.79
... More
Drainage Spouts complete as per drawing and technical specifications Clause 1209
16
5080
81290.08
... More
P.C.C. M-15 ordinary grade (1:2.5:5) levelling course below approach slab complete as per drawing and technical specificatios Clauses 800 & 1211.
8.93
7887
70438.68
... More
Reinforced Cement Concrete M-30 Grade Approach Slab including reinforcement and formwork complete as per drawing and technical specifications Clauses 800 and 1211
19.52
12819
250236.25
... More
Providing and laying cement concrete wearing course M 30 grade including reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3
48.71
14456
704151.76
... More
Strip Seal Expansion Joint (Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation.)
25.35
12600
319431.29
... More
Providing & fixing 20 mm thick Compressible Fibre Board in expansion joint complete as per drawing & Technical Specification.
25.35
454
11517.01
... More
Providing and fixing in position 20 mm thick Premoulded Joint Filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, covered with sealant complete as per drawing and technical specifications.
25.35
167
4250.18
... More
PROTECTION WORK
-
-
-
... More
Providing and laying boulder pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1302
211.1
5030
1061997.66
... More
Providing and laying filter material underneath pitching in slopes complete as per drawing and technical specifications Clause 1302
93.04
5079
472641.34
... More
Miscellaneous Work
-
-
-
... More
Providing & Applying 2 coats of water based cement paints to unplastered concrete surface after cleaning the surface of dirt,dust,oil,grease,effloresence and applying paint @ of 1 litre for 2 sqm
244.4
116
28472.6
... More
APPROCH ROAD
-
-
-
... More
Clearing and Grubbing Road Land ( By manual means) including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of E/I
0.22
73254
16115.96
... More
Construction of Embankment with material obtained from borrow pits with a lift upto 1.5 m , transporting to the site spreading , grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 .
3122
245
766888.08
... More
Construction of Subgrade And Earthen Shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.
1039.8
248
258816.62
... More
GSB :- Construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.
229.39
3662
840200.52
... More
WBM Grading 2:- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405.
161.1
6599
1063242.28
... More
WBM Grading 3:- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.
80.55
6197
499217.49
... More
PRIME COAT:- Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per Technical Specification Clause 502.
1074
55
59982.9
... More
TACK COAT:- Providing and applying tack coat with bitumen emulsion (RS ) using emulsion distributor @ 0.25 to 0.30 kg per sq m on the prepared Granular surface cleaned with hydraulic broom as per technical specification clause 503.
1074
19
20620.8
... More
Premix Carpet :- Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or C Type C as per Technical Specification Clause 508.
1074
268
288240.12
... More
Seal Coat (Type B):- Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510
1074
83
90151.56
... More
Providing and Fixing 'Logo' of Project informayory sign board with Logo as per MORD specifications and drawing. Three MS plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5 m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 Nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600 mm,600 mm,600 below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12SWG steel plate tube. All M.S will be stove enameled on both sides. Lettering and printing arrows, border etc, will be painted with ready mixed synthetic enamer paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 abd Annexure 1700.1.
4
10629
42518.64
... More
Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801
-
-
-
... More
900 mm equilateral & triangle
2
6170
12340.36
... More
900 mm side octagon
2
9110
18221.26
... More
900 mm x 300 mm,Hazard Marker
4
4598
18393.32
... More
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface:-Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
48
778
37360.8
... More
Type - A, "W" : Metal Beam Crash Barrier:-
Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810
160
3178
508500.8
... More
1% LABOUR CESS
1
305309
305309.25
... More
SEIGNOIRAGE FEE
1
231931
231931.97
... More
18% GST
1
5592269
5592269.81
... More
Total Cost for 1st Year Maintenance Work
1
15620
15620
... More
Total Cost for 2nd Year Maintenance Works
1
20096
20096
... More
Total Cost for 3rd Year Maintenance Works
1
98244
98244
... More
Total Cost for 4th Year Maintenance Works
1
29487
29487
... More
Total Cost for 5th Year Maintenance Works
1
161772
161772
... More
1% LABOUR CESS
1
3252
3252.19
... More
SEIGNOIRAGE FEE
1
1048
1048.39
... More
18% GST
1
59313
59313.53
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements