Bharat Sanchar Nigam Limited Tender
... More
The BSNL has issued a formal invitation for competitive bids for the Bharat Sanchar Nigam Limited project, for Provision Of Repairing Of Boundary Wall, Water Proofing Treatment And Misc. Civil Work In Te Campus Rajendra Nagar, Patna 2nd Call in Patna, Bihar, with an estimated contract value of Rs. 2,66,525. The bid opening date for this tender is 11-11-2026 and the last date for bid submission is 21-11-2026. Interested bidders for Bharat Sanchar Nigam Limited tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Bharat Sanchar Nigam Limited - BSNL Tender - Bihar Tender
Opening Date11 Nov 2026
Closing Soon21 Nov 2026
Tender Amount₹ 2,66,525
Costs
EMD
₹ 5,331Document Cost
₹ 590Tender Fee
Refer Documents
Description
Provision Of Repairing Of Boundary Wall, Water Proofing Treatment And Misc. Civil Work In Te Campus Rajendra Nagar, Patna 2nd Call
Contact
Tender Id
2026_BSNL_297452_1Tender No
57/NIT/EE/PTCD/2026-27Tender Authority
Bharat Sanchar Nigam Limited ViewPurchaser Address
-Website
https://www.bsnl.co.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Finishing walls with Acrylic Smooth exterior paint of required shade
(a) Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).
250
80
-
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead (a) Of area 3 sq. metres and below
2
367
-
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
75
54
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters
(a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
5.5
2172
-
... More
20 mm cement plaster of mix
(a) 1 :6 (1cement : 6 fine sand)
20
450
-
... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : (a) 3 mm thick
205
537
-
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
1
1124
-
... More
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete (a) 300x16mm
5
303
-
... More
(b) 250x16 mm
1
260
-
... More
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete
(a) 300x10 mm
4
130
-
... More
(b) 250x16 mm
1
115
-
... More
Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete
(a) 125 mm
5
66
-
... More
Easing and adjusting of Aluminium/Wooden doors/windows shutter with necessary hinges, screw etc. complete as per direction & satisfaction of Engineer in charge
10
500
-
... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty
(a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).
2
1090
-
... More
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge (a) 25 mm average thickness
30
126
-
... More
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. (a) Bars upto 12 mm diameter
2
8
-
... More
(b) Bars above 12 mm diameter
2
16
-
... More
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. (a) Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make.
30
282
-
... More
Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). (a) 12 mm average thickness
15
388
-
... More
(b) 25 mm average thickness in 2 layers
15
587
-

