Bench Tenders

Description: Condemned/unserviceable Steel Furniture Broken & Corroded Consisting Of Steel Lockers, Steel Cupboards, Chairs And Office Tables, Bench Steel, Wheelchairs With Or Without Handles, Any Other Steel Furniture Similar Items In Broken/damaged Condition With Or Without N.f If Any. And Wooden Plywood Top Attachment If Any. Remarks - Lot Is Approachable By Pakka Road. The Delivery Of Ferrous Will Be Made On Actual Weighment Basis Only At Haji Bunder Depot. The Items Mentioned In The Description Only Will Be Delivered. In Case Of Excess Quantity Entire Quantity To Be Lifted By The Purchaser By Payment For Difference Of Actual Quantity Delivered With Lot Quantity As The Shed No. 8 Is To Be Demolished/dismantled To Pave Way For Vande Bharat Shed. The Quantity Is Worked Out On Approximate Basis. Cutting /dismantling Is Allowed For Easy Loading. The Purchaser Should Ensure That During Loading No Nearby Structure/building Should Be Affected And Take Necessary Care/safety Precautions To Avoid Any Mishap As Well As Damage To Railway Property. The Purchaser Will Be Fully Responsible If Any Accident/unusual Incident Occurs At Work Site/place During Dismantling. The Purchaser Is Advised To See The Lot Site/content Before Bidding. No Claim Will Be Entertained After Sale Of Lot. Lot Is Ok For Sale With Above Observations. Location - Inside Shed No. 8, Wadibunder. Qty - 10.000 Mts. (approx.) Stock Holder - Cci (parcel) Csmt. Note :- Original Lot No. 920224103021.

Description: CATEGORY: CHEST TOOL KIT SMALL , DRIFT BRASS PARALLEL , FILE ROUND SMOOTH , FILE FLAT SECOND CUT , FILE HALF ROUND SMOOTH , GUAGES THIKNESS FEELER TYPE , HAMMER BP 800GMS , HANDLE FILES 127MM , PLIER SIDE CUTTING INSULATED 200MM , PUNCHES ROUND 5MM , SCREW DRIVER ELECT 50MM , SCREW DRIVER ELECT 150MM , SCREW DRIVER ELECT 165MM , SCREW DRIVER PHILIPS HEAD 100MM , SPANNER OPEN JAW 7X8MM , SPANNER OPEN JAW 8X9MM , SPANNER OPEN JAW 10X11MM , SPANNER OPEN JAW 12X14MM , SPANNER OPEN JAW 13X17MM , SPANNER OPEN JAW 16X17MM , SPANNER OPEN JAW 18X19MM , SPANNER RING TYPE DE 6X7MM , SPANNER RING TYPE DE 7X8MM , SPANNER RING TYPE DE 10X11MM , SPANNER RING TYPE DE 16X17MM , SPANNER RING TYPE DE 19X22MM , SPANNER RING TYPE DE 24X27MM , CHISEL COLD FLAT 16MM , VICES BENCH 125MM , SOLDERING IRON ELECT 230 VOLTS

Description: Scrap Comp. Of Heavy Structure Including, Railway Pull Structure, Hospital -beds,railway Pull Structure ,different Type Of Door's,battery Box,gates,sheets,fabricated Tower Cut Pcs, Window Grill,panels, Vaccum Cylinder, Hand-wheel-barrow, Almirah, Tank,pipes,electrical Empty Panel,compressor,window-frame,cut Pcs Of Coach Door,angles,channels, Benches, Tie-bar, Almirah, Foot Steps, Boxes,wire Rope,pieces Of Furnance & Cutting Parts Of C&w With Or W/o Attachemnts, Us & Ur. Loc:- Material Lying At Two Places- 1. Lying Back Side Of 100 Mt Weight Bridge In Scrap Yard Judw.(2). Material Lying At Bg-29 In Scrap Yard Judw. Remarks:- [1] Loading By Purchaser. [2] Cutting Allowed For Loading Purpose. [3] Cutting Will Be Allowed After Following All The Fire Prevention Related Instructions Of Jagadhri Depot. [4] Road Crane Allowed For Loding Purpose. Note:- Nfs Items Will Be Taken Back If Found In Lot.

Details: Description:- Earthworkinfillinginembankment,guidebunds,aroundburiedtypeabutments, bridge Gaps, Trolley Refuges, Platforms Etc. With Contractor's Own Earth Conforming To Soil Quality Class sq1/sq2/sq3, After Preparation Of Foundations As Applicable, Benching In Existing Banks Wherever required, Spreading In Layers With Motor Grader, Bringing The Moisture Content To Omc, Mechanical compactiontospecifieddensity And Dressing Of Bank To Final Profile As Per Rdso Specifications: rdso/2020/ge:irs-0004withlatestcorrectionslips. Note:1)foundationpreparation,benching includingadditionalearthworkonaccountofthis,whereverrequired,shallbepaidextraunder relevant Schedule Item For Benching. 2) Payment For Earthwork Under This Item Shall Be Made Based On the Cross Section Measurements Calculated (i) With Original Ground Profile Of Existing Bank Based On initial Ground Levels Before Doing Benching And (ii) Final Profile Of The Bank Worked Out With Final Levels as Per Prevailing Guidelines. Using Soil Class Sq1

Details: Description:- Geological Mapping Of The Proposed Alignment For A Corridor Width Of 200 M (100 M On either Side) In Scale 1:5000 Of Critical Ara And Submission Of Geological In Relevant Areas (1:5000 H & 1:500v) And Cross Section Across The Valley/nullah/streams And Across Other Important Geological ffeatures Including Survey Work Required (by Total Station And Dgps) For Geological Mapping And geophysical Survery). The Survey Work Also Includes Establishment Of Control Points, Reference Points & Bench Marks (with Coordinates) On Ground By Construction Rcc Pillars For Verification Of The Design alignment On Map In Field) For Tunnels And Cut-cover.

Details: Description:- Earthwork In Filling In Embankment, Guide Bunds, Around Buried Type Abutments, Bridge gaps, Trolley Refuges, Platforms Etc. With Contractor's Own Earth Conforming To Soil Quality Class sq1/sq2/sq3, After Preparation Of Foundations As Applicable, Benching In Existing Banks Wherever required, Spreading In Layers With Motor Grader, Bringing The Moisture Content To Omc, Mechanical compactiontospecifieddensity And Dressing Of Bank To Final Profile As Per Rdso Specifications: rdso/2020/ge:irs-0004withlatestcorrectionslips. Note:1)foundationpreparation,benching includingadditionalearthworkonaccountofthis,whereverrequired,shallbepaidextraunder relevant Schedule Item For Benching. 2) Payment For Earthwork Under This Item Shall Be Made Based On the Cross Section Measurements Calculated (i) With Original Ground Profile Of Existing Bank Based On initial Ground Levels Before Doing Benching And (ii) Final Profile Of The Bank Worked Out With Final Levels as Per Prevailing Guidelines. Using Soil Class Sq2

Description: BOQ ITEMS: Ring Spanner double End set of 12 Pcs Crome Plated, Taparia-Stainley, Combination Spanner double End Set of 12 Pcs Crome plated, Taparia-Stainley, Double Open End Spanner Set of 12 Pcs Crome Plated, Taparia-Stainley, Combination Plier 10 inch, Taparia, Hammer Ball Pin with Handle 500 Gms, Taparia, Screw Driver Transparent Green Handle 300 mm long 10 mm dia ,Taparia, Screw Driver Transparent Green Handle 200 mm long 6 mm dia, Taparia, Star Screw Driver Transparent Green Handle 150 mm long 6 mm dia,Taparia, Star Screw Driver Transparent Green Handle 100 mm long 6 mm dia,Taparia, Screw Driver Set of 6 Pcs, Taparia, Monkey Plier 8 inch, Taparia, Filler Guage, Socket set L-Duty Make Taparia, Tool box Steel 410 x 220 x 153 mm, Multi meter -Digital-, DC Soldering Iron 250 Watts, Soldering Iron 1000 Watts, Dial guage for FIP -0-15 MM-, Cotton Waste, Battery cable 60-44 Black, Battery cable 60-44 Red, Hydrometer, Adjustable 6 inch-150mm, Adjustable 12 inch-150mm, Puller 2 Leg, Puller 3 Leg, Box Spanner Set, Bench Vice 12 inch, Bench Vice 6 inch, Magnetic Stick, Hexagonal rod MS 18 mm 10 Feet long, Hexagonal rod MS 32 mm 10 Feet long, Brass Rod round 6 mm dia 10 feet long, Brass Rod round 35mm dia 10 feet long, Brass Rod round 50 mm dia 10 feet long, Brass Sheet 100 cm x 14 cm 22 guage, Brass Sheet 100 cm x 14 cm 18 guage, Tap & Die set 20 mm 16 mm x 1.5mm pitch, Die 12 mm x 1.75 mm pitch, Tape & Die set 16 mm x 1.5 mm pitch, Tap & Die set 6 mm to 24 mm, Tap & Die set 1-4 inch to inch BSW, Tap & Die set 5-16 inch -24, Tap & Die set BSF 1-8 inch to 1 inch, Tap & Die set BSF 1-4 inch to 1 inch, Die Set 8 x 1 mm , Needle file set, Tap & Die 10 x 1 mm, MS sheet 4 mm x 8 Ft x4 Ft, MS sheet 6 mm x 8 Ft x4 Ft, MS sheet 10 mm x 8 Ft x4 Ft, Trolly Jack 7-10 Ton Capacity, Alenkey 12 Mm, Alenkey Set -Trox Head-, Nose Plier inner 10 mm, Cutting Plier Outer 10 mm, Nose Plier Outer 10 mm, Hydrolic jack 10 Ton Cap, Hydrolic Jack 7 Ton Cap, Air Pressure guage

Description: Auction Of Biogas Plant-1 Unit, Ms/gi Scrap Material-25 Mt, Electrical Scrap-5 Mt, Used Ms End Pieces Bar & Plates, Mechanical Ms-15 Mt, Die Steel Scrap-8 Mt, Cables Copper Aluminum Mix-1 Mt, Raw Material- Aluminium Alloys Consisting Of Alsi 132, Ac4b, Ac2b Ingot, Adc12-9 Mt, Round Bars, Flats, Pipes, Offcut Assorted Sizes-13.5 Mt, Old Used Various Mechanical, Electrical Equipment Consisting Eddy Current Dynamometer (with Table)-2 Nos, Vinjex Make Scooter Loading Platform (2 Nos), Ms Ladders (4 Nos), Mitsubishi Power Tiller, Overhead Crane Hoist 2t-2 Nos, 5t Capacity 6 Mtrs Lifts Chain Pulley-1 No, Hardness Tester, Oil Dispensing Unit, Hydraulic Drum Shifting Unit, Flower Filters, Dead Weight Pressure Gauge, Welding Rectifier, Air Lubricator, 440 Kva Capacitor, Trimoss Model Vta - 600 T, Bench Grinder, Pallet Trucks-4 Nos, Ms Cabinets, Cupboards, Lockers, Racks, Aluminum Ladders (3 Nos), Manual Chain Pully Crane (4 Nos), Air Handling Unit (ahu) Consisting Of Ms Platform, Blower, Cabin, Ducting, Voltas Make Diesel Forklift-3 Ton Cap, Used/unused Piston Liner, Rings-3.5 Mt, Water Tanks 15 Kl Capacity (2 Nos), Graphite Blocks & Graphite Raw Material Etc.

Details: Description:- Earthwork In Filling In Embankment, Guide Bunds, Around Buried Type Abutments, Bridge gaps, Trolley Refuges, Platforms Etc. With Contractor's Own Earth Conforming To Soil Quality Class sq1/sq2/sq3, After Preparation Of Foundations As Applicable, Benching In Existing Banks Wherever required, Spreading In Layers With Motor Grader, Bringing The Moisture Content To Omc, Mechanical compactiontospecifieddensity And Dressing Of Bank To Final Profile As Per Rdso Specifications: rdso/2020/ge:irs-0004withlatestcorrectionslips. Note:1)foundationpreparation,benching including Additional Earthwork On Account Of This, Wherever Required, Shall Be Paid Extra Under Relevant schedule Item For Benching. 2) Payment For Earthwork Under This Item Shall Be Made Based On The cross Section Measurements Calculated (i) With Original Ground Profile Of Existing Bank Based On Initial ground Levels Before Doing Benching And (ii) Final Profile Of The Bank Worked Out With Final Levels As Per prevailing Guidelines. Using Soil Class Sq2

Description: Pl No. 98050126] Scrap Cond./released/unserviceable Ms Scrap Such As Mg/bg Carriage Frames, Coach Battery Box , Seat Frames Of Different Sizes, Berth Frames, Luggage Frames,empty Electrical Box, Spring, Nameplate, Wheel Stand, Ms Benches, Gi Re Mast, Window Frames, Window Grills, Ms Grills, Ms Stands, Rolling Shutters And Partition Frames Of Coaches , Angles, Channels, Suspension Rods , Foot Step, Ms Boxes, Battery Boxes Ac/non Ac, Hand Cart, Lift Door, Crane Tool, Cot Pipes, Angles, Channels, Cibes, Cut Parts Of Coaches, Coach Sheets, Iron Rods, Gates, Trolley, Ms Cot, Bucket, Ms Door, Battery Box, Seat Frame, Bolt & Nut And Other Nmg Coach Cutting Scrap Items Coming Under Ms Items On As Is Where Is Condition Available Under The Custody Of Cdms 08 Ward Ap. Note: 1.pick And Choose Of The Material Are Not Allowed. Loading To Be Started From One End And To Be Ended On Other End Only. ( Loc: Bin No. 0124 At Scrap Yard)