Welfare Of Plain Tribes And Backward Classes Department Tender
... More
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Welfare Of Plain Tribes And Backward Classes Department - WPTBC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date22 May 2025
Closing Date13 Jun 2025
Tender Amount₹ 75,60,00,000
Technical
Technical
Financial
Additional Eligibility
Bid Capacity
... View More
The formula for bid capacity is Assessed Available Bid capacity = (A*N*M - B), where A is the maximum value of civil engineering works executed in any one year during the last five years, N is the number of years prescribed for completion of the works, M is 2, and B is the value of existing commitments and ongoing works to be completed during the period of completion of the works.
Technical Capacity
... View More
The required prior work experience for the bidder includes:
- For Civil Engineer: B.E Civil + 5 years of experience
- For Site Engineer (Civil): Diploma in Civil + 5 years of experience
- For Site Engineer (Elect): B.E Electrical + 5 years of experience
- For Quality Control Engineer: B.E Civil + 3 years of experience or Diploma Civil + 5 years of experience The bidder should have completed works of a similar nature, with information on the name of the employer, description of work, contract number, value of contract, date of issue of work order, stipulated period of completion, actual date of completion, and remarks explaining reasons for delay and work completed. The bidder must have carried out a single work of similar nature of work for 80% of Work Value in any one year of the last five years. Additionally, the annual turnover must not be less than 40% of Work value only. The bidder should have achieved a minimum financial turnover of 40% in civil engineering construction works. They must have satisfactorily completed works of: - Single work: 80% of contract value, - Double works: 50% of contract value (each work), - Triple works: 40% of contract value (each work), as a prime contractor, with at least one single similar work of value not less than 80% of the work value in any one year of the last five years. The bidder should have completed works with a value of at least the amount indicated in Appendix-I, and should have a minimum average annual turnover of the amount specified in Appendix-I, over the last five years. The bidder should have liquid assets and credit facilities of not less than the amount indicated in Appendix-I. The bidder's available bid capacity should be more than the total bid value, calculated based on the maximum value of civil engineering works executed in any one year during the last five years, and the number of years prescribed for completion of the works. The estimated amount of the contract is Rs. 75,60,00,000.00 (Rupees Seventy-five crore sixty lakh). The bidder should provide information on the proposed methodology and program of construction, backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion milestones. The bidder is required to have a minimum cash investment of 20% of the contract value during the implementation of the work, and should provide evidence of access to lines of credit and availability of other financial resources facilities (10% of contract value), certified by the bankers.
Costs
EMD
₹ 1,51,20,000Document Cost
₹ 1,51,200Tender Fee
Refer Documents
Summary
Proposal For Administrative Approval For Construction Of Working Women Hostel(wwh) For An Amount Of Rs 8400.00 Lakh
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_WPTBC_44457_1Tender No
PTDC/Engg/2024-25/299(1)Gr-01Tender Authority
Welfare Of Plain Tribes And Backward Classes Department ViewPurchaser Address
-Website
http://https://assamtenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
2.25a - Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
-
368
-
... More
20.1 - Providing, driving with hydraulic piling rigs with power units and installing driven cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of shoe and the length of pile to be embedded in the pile cap etc. all complete. (Length of pile for payment shall be measured from top of shoe to the bottom of pile cap) : 20.1.1 400 mm dia piles
-
2333
-
... More
2.8 - Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil.
-
286
-
... More
16.12 - Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete : 16.12.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
-
607
-
... More
4.1 - CEMENT CONCRETE (CAST IN SITU)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
-
6326
-
... More
4.11 - Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size)
-
452
-
... More
4.17 - Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth
-
681
-
... More
5.22 - Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
-
89
-
... More
5.22A - Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more
-
89
-
... More
5.9 - Centering and shuttering including strutting, propping etc. and removal of form for :
5.9.1 Foundations, footings, bases of columns, etc. for mass concrete
-
307
-
... More
5.9.3 - Suspended floors, roofs, landings, balconies and access platform
-
766
-
... More
5.9.5 - Lintels, beams, plinth beams, girders, bressumers and cantilevers
-
608
-
... More
5.9.6 - Columns, Pillars, Piers, Abutments, Posts and Struts
-
804
-
... More
5.9.7 - Stairs, (excluding landings) except spiral-staircases
-
657
-
... More
5.1 - Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
-
8364
-
... More
5.2 - Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars,piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
-
10185
-
... More
5.3 - Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
-
10719
-
... More
6.1 - Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand)
-
6882
-
... More
2.27 - Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete
-
2161
-
... More
6.13 - Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand)
-
1018
-
... More
9.1 - Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 9.1.1 Second class teak wood
-
131576
-
... More
26.86 - Providing and fixing factory made single extruded WPC (Wood
Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 5860 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).
-
1000
-
... More
26.87 - Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 26.88 30 mm thick
-
3954
-
... More
9.20 - Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
-
3086
-
... More
9.147D - Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made 9.147D.1 Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)
-
7634
-
... More
9.7 - Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick 9.7.7 Float glass panes 9.7.7.1 4 mm thick glass pane (weight not less than 10kg/sqm).
-
1897
-
... More
9.48 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete
-
197
-
... More
10.3 - Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer
-
9397
-
... More
9.71 - Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 9.71.1 125x64x2.50 mm
-
104
-
... More
9.96 - Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 9.96.2 250x16 mm
-
234
-
... More
9.96 - Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 9.97.2 250x10 mm
-
104
-
... More
9.10 - Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 9.100.1 125 mm
-
60
-
... More
9.82 - Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete
-
30
-
... More
9.88 - Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
-
817
-
... More
4.1 - Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
-
7365
-
... More
11.41A - Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
11.41A.1 Double charge vitrified tile polished finish of size
11.41A.1.1 Size of Tile 600 x 600 mm
-
1286
-
... More
11.41A - Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size 11.41A.3.1 Size of Tile 600 x 600 mm
-
1311
-
... More
8.31 - Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
-
1063
-
... More
11.56 - Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
-
3908
-
... More
12.53 - Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board
-
1300
-
... More
13.2 - 15 mm cement plaster on the rough side of single or half brick wall of mix : 13.2.1 1:4 (1 cement: 4 fine sand)
-
339
-
... More
13.3 - 20 mm cement plaster of mix : 13.3.1 1:4 (1 cement: 4 fine sand)
-
402
-
... More
13.7 - CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 12 mm cement plaster finished with a floating coat of neat cement of mix :
13.7.2 1:4 (1 cement: 4 fine sand)
-
361
-
... More
8.11 - Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. 8.11.1 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc
-
9278
-
... More
13.80 - PLASTER OF PARIS & WALL PUTTY
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
-
123
-
... More
13.43 - Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 13.43.1 Water thinnable cement primer
-
64
-
... More
13.48A - Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. 13.48A.1 New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
-
154
-
... More
13.81 - Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 13.81.2 Two coats
-
90
-
... More
13.45 - Finishing walls with textured exterior paint of required shade : 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
-
245
-
... More
13.50.3 - With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works
-
55
-
... More
13.61 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 Two or more coats on new work.
-
131
-
... More
22.3 - Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) (ii) (iii) (iv) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
-
774
-
... More
10.28 - Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
-
612
-
... More
16.68 - Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
-
951
-
... More
19.32 - Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
-
28029
-
... More
Septic Tank
-
-
-
... More
Head I - Earth work 2.6 - Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 2.6.1 - All kinds of soil
-
205
-
... More
2.26 - Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials 2.26.1 - All kinds of soil
-
104
-
... More
2.36 - Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge.
-
76
-
... More
Head II Concrete work 4.1 - Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.8 - 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
-
6326
-
... More
Head III-Reinforcement Cement Concrete work 5.33 - Providing and laying in position ready mixed M25 grade concrete for RCC work, using cement content as per approved design mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads having continuos aggitated mixtures, manufactured as per Mix Design of specified Grade for RCC work including pumping of RMC from transit mixer to site of laying excluding the cost of centering, shuttering, finishing and reinforcement including cost of admixtures in recommended proportions as per IS-9103 to accelerate, retard setting of concrete, improve workability withoug imparing strength and durability as per direction of Engineer-In-Charge. (Note : Cement content considered in this item is @330 Kg/Cum. Excess or less cement used as per design mix is payable or recoverables separately) 5.33.1 - All works upto plinth level
-
7997
-
... More
Head IV - Form work 5.9 - Centering and shuttering including strutting, propping etc. and removal of form for 5.9.1 - Foundations, footings, bases of columns, etc. for mass concrete.
-
307
-
... More
5.9.3 - Suspended floors, roofs, landings, balconies and access platform
-
766
-
... More
Head V - Reinforcement Steel work 5.9.5 - Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6 - Thermo-Mechanically Treated bars of grade Fe-500D or more
-
89
-
... More
6.1.1 - First class brickwork with F.P.S. bricks in foundation and plinth in cement mortar 1:4
-
6882
-
... More
13.9 - Cement Plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. A13.9.2 20mm cement plaster
-
386
-
... More
SOAK PIT 19.32 - Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
A 19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
-
28029
-
... More
CHAMBER 19.32 - Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
-
17577
-
... More
Underground Sump
-
-
-
... More
2.8 - Reservoir size: 7.5m x 3.6m x 2.1m Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
2.8.1 All kinds of soil.
-
286
-
... More
CEMENT CONCRETE (CAST IN SITU)
4.1 - Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
4.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)
-
6833
-
... More
5.1 - Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
-
8364
-
... More
5.9 - Centering and shuttering including strutting, propping etc. and removal of form for :
5.9.3 Suspended floors, roofs, landings, balconies and access platform
-
766
-
... More
STEEL REINFORCEMENT
5.22 A - Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more
-
89
-
... More
6.1 - Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand)
-
6882
-
... More
Brick Soling: 11.2 - Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.
-
733
-
... More
13.8 - CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT
15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :
13.8.2 1:4 (1 cement: 4 fine sand)
-
406
-
... More
BRICK DRAIN
-
-
-
... More
2.8 - Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
2.8.1 All kinds of soil.
-
160
-
... More
Brick Soling: 16.12 - Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete : 16.12.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
-
644
-
... More
CEMENT CONCRETE (CAST IN SITU)
4.1 - Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
4.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)
-
7294
-
... More
6.1 - Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand)
-
7370
-
... More
CEMENT PLASTER WITH A FLOATING COAT OF NEAT 13.7 - CEMENT12 mm cement plaster finished with a floating coat of neat cement of mix :
13.7.2 1:4 (1 cement: 4 fine sand)
-
425
-
... More
5.22 - Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.
-
107
-
... More
FORM WORK
5.9 - Centering and shuttering including strutting, propping etc. and removal of form for : 5.9.3 Suspended floors, roofs, landings, balconies and access platform
-
927
-
... More
5.3 - Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
-
11505
-
... More
150 meter Borewell
-
-
-
... More
23.2 - Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.
23.2.1 All types of soil
23.2.1.1 300 mm dia
-
690
-
... More
23.3 - Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
23.3.2 150 mm nominal size dia
-
668
-
... More
23.4 - Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
23.4.2 150 mm nominal size dia
-
681
-
... More
23.8 - Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
-
1479
-
... More
23.12 - Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
-
916
-
... More
23.13 - Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
23.13.2 150 mm dia
-
210
-
... More
23.14 - Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
23.14.2 150 mm clamp
-
1609
-
... More
23.15 - Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).
23.15.2 150 mm dia
-
281
-
... More
18.9 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
18.9.5 40 mm nominal dia Pipes
-
559
-
... More
18.34 - Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
18.34.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
-
17577
-
... More
RA01 - Supplying of 2 HP single phase Submersible Pump, Starter Control Panel, Copper Wire, Safety Wire Rope , Adopter, FAPT, Bushing, Elbow, Taptop Tape, Caustic Sode, Bleching Powder etc. complete as specified and directed.
-
58574
-
... More
ESTIMATE FOR INTERNAL ELECTRIFICATION WORK
-
-
-
... More
1.10 - Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 1.10.1 - Group A
-
1015
-
... More
1.10.2 - Group B
-
1182
-
... More
1.10.3 - Group C
-
1467
-
... More
1.14 - Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 1.14.1 - 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
-
233
-
... More
1.14.2 - 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
-
275
-
... More
1.14.3 - 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
-
334
-
... More
1.14.4 - 2 X 6 sq. mm + 1 X 6 sq. mm earth wire
-
439
-
... More
1.14.9 - 4 X 6 sq. mm + 2 X 6 sq. mm earth wire
-
754
-
... More
1.14.10 - 4 X 10 sq. mm + 2 X 6 sq. mm earth wire
-
1365
-
... More
1.22 - Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 1.22.8 - 200 mm X 150 mm X 75 mm deep
-
363
-
... More
1.24 - Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 1.24.1 - 5/6 A switch
-
103
-
... More
1.24.3 - 15/16 A switch
-
156
-
... More
1.24.4 - 3 pin 5/6 A socket outlet
-
122
-
... More
1.24.5 - 6 pin 6/16 A socket outlet
-
197
-
... More
1.26 - Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
-
40
-
... More
1.27 - Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1.27.1 - 1 or 2 Module (75mmX75mm)
-
298
-
... More
1.27.2 - 3 Module (100mmX75mm)
-
327
-
... More
1.27.3 - 4 Module (125mmX75mm)
-
343
-
... More
1.27.4 - 6 Module (200mmX75mm)
-
402
-
... More
1.27.5 - 8 Module (125mmX125mm)
-
454
-
... More
1.27.6 - 12 Module (200mmX150mm)
-
547
-
... More
1.25 - Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
-
369
-
... More
2.4 - Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2.4.1 - 6 way (4 + 12), Double door
-
4091
-
... More
2.2 - Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 2.2.14 - 125 A,36KA,FP MCCB
-
8209
-
... More
2.2.16 - 250 A,36KA,FP MCCB
-
17510
-
... More
2.10 - Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2.10.1 - Single pole
-
256
-
... More
5.2 - Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required.
-
6855
-
... More
5.5 - Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt ) as required.
-
12622
-
... More
5.7 - Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
-
51
-
... More
5.10 - Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I.pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
-
1551
-
... More
5.14 - Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
-
1162
-
... More
5.15 - Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
-
244
-
... More
19.1 - Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC
-
2730
-
... More
7.1 - Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 7.1.3 - Above 95 sq. mm and upto 185 sq. mm
-
422
-
... More
Non Schedule items
-
-
-
... More
Sypply installation testing commissioning recessed mounted round downlighters 9W LED of Jaguar make cat no. IDL-WHT-LARP01R009XN or equivalent make including connection complete.
-
1495
-
... More
Sypply installation testing commissioning recessed mounted round downlighters 12W LED of Jaguar make cat no.IDL-WHT-LARP01R012XN or equivalent make including connection complete.
-
1596
-
... More
Sypply installation testing commissioning recessed mounted Square downlighters 12W LED of Jaguar make cat no.IDL-WHT-LNEP01S012XN or equivalent make including connection complete.
-
1569
-
... More
Sypply installation testing commissioning recessed mounted Square downlighters 18W LED of Jaguar make cat no.IDL-WHT-LNEP01S018XN or equivalent make including connection complete.
-
1975
-
... More
Sypply installation testing commissioning recessed mounted Square downlighters 24W LED of Jaguar make cat no.IDL-WHT-LNEP01S024XN or equivalent make including connection complete.
-
2685
-
... More
Sypply installation testing commissioning recessed mounted Panel 2ft x2ft 24W LED of Jaguar make cat no.IPN-WHT-LULTSLS024XC or equivalent make including connection complete.
-
3700
-
... More
Sypply installation testing commissioning recessed mounted Batten tube 20 W LED of Jaguar make cat no.BTI-WHT-LGLZ01X020XC or equivalent make including connection complete.
-
900
-
... More
Sypply installation testing commissioning Wall mounted up down 2x18W LED of Jaguar make cat no. OWA-GRY-457LL18X2H or equivalent make including connection complete.
-
58147
-
... More
Supplying including fitting fixing of high speed 300mm sweep following Exhaust fan (Havells make) model Ventil Air DS or equivalent in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.
-
3700
-
... More
Supply and installation of 25A modular starter .
-
1991
-
... More
Supplying and fixing of following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. b)63A FP MCB
-
5202
-
... More
Supplying with fitting and fixing MCCB income and MCB outgoing sheet steel, phosphatised, powder painted double door surface mounting vertical TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar up to 125A and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. a) 6 way (4 + 18), Double door
-
27135
-
... More
Supply of 3.5Core/4 Core PVCA Aluminium/Copper cable of following ratings d) 3.5C 185 Sq.mm Aluminium
-
3119
-
... More
Supplying including installation, commissioning of vermin and dust proof totally enclosed cubical indoor type floor/wall mounting compartmentalize Main Distribution panel board (MDP)of size 1.5.0M X 1.6.0M X 0.6M made of 16 SWG/1.66 mm thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom complete painting with 2 coats of Red Oxide metal primer and 2 coats of enamel paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly Wiring done with provision for 1nos 250A 4pole MCCB and Bus Bar of rated capacity as incomer and 1no 125A FP MCCB, 2nos 63A FP MCB, 12nos 32A SP MCB at out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items:
-
132450
-
... More
ESTIMATE FOR EXTERNAL ELECTRIFICATION WORK
-
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 7.1.1 - Upto 35 sq. mm
-
387
-
... More
A) Non Schedule items Feeder Pillar Design, Manufacture, Supplying, Fixing in position, Testing & Commissioning of floor mounted Feeder Pillar including all components housed in 16 SWG cubicle type sheet steel floor mounting, outdoor type as required with dust proof, hinged and lockable doors complete with inter-connections with copper wires, taps, bonding to earth & painting in line with specification, complete with neutral, earth strips of adequate size & drawings. a) Incoming : 40 Amps DPN MCB 1 no. b) Busbar: 63 Amps DP Copper Busbar Outgoings: c) 16A SP MCB --6nos
-
50982
-
... More
Supply of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908 (Part 1) 1988 armoured U.G. cable as specified and directed by the deptt. a)6.00 Sq.mm 3 Core armoured U.G. cable
-
306
-
... More
b)10.00 Sq.mm 4 Core armoured U.G. cable
-
443
-
... More
Fabrication, supply and erection of 6 Mtr. Long 75mm dia MS pole with MS base plate of 300x300x10mm thickness at the bottom of the pole with fixing arrangement for post top lantern and to accomodate a junction box. The foundation is of cement concrete of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate) size 0.8 x 0.8 x .35 m3 with collar of size 0.4m dia x 0.5m height to accomodate the looping type cable end box including excavation and refilling etc. as required. The pole shall be painted with one coat of red oxide primer and two coats of aluminium paint.
-
20987
-
... More
Fabrication, supply and erection of 3 Mtr. Long 40mm dia MS pole with MS base plate of 300x300x10mm thickness at the bottom of the pole with fixing arrangement for post top lantern and to accomodate a junction box. The foundation is of cement concrete of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate) size 0.8 x 0.8 x .35 m3 with collar of size 0.4m dia x 0.5m height to accomodate the looping type cable end box including excavation and refilling etc. as required. The pole shall be painted with one coat of red oxide primer and two coats of aluminium paint.
-
13151
-
... More
Supply, Installation, Testing and Commissioning of 200W LED Flood light with aluminium die-cast housing, toughened glass and unique lens system for enhanced illumination of make Jaguar Model cat. No. OFL-GRY-LFLDSLS200XC or equivalent with frames etc. and connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor including lamps, drivers etc. as required complete and as directed by the department .
-
27962
-
... More
Supply, Installation, Testing and Commissioning of 90W LED Street light with aluminium die-cast housing, toughened glass and unique lens system for enhanced illumination of make Jaguar Model cat. No. OSL-GRY-LSRTTOS090XC or equivalent with frames etc. and connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor including lamps, drivers etc. as required complete and as directed by the department .
-
19848
-
... More
Supply, installation and testing of 40W LED Gate Light of Pure polyester powder coated die cast aluminium housing with PMMA clear diffuser for uniform illumination of make Jaguar Model Cat no. OGL-GRY-LGTP06R040XW or equivalent with necessary support and connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor and all accessories as required and as directed.
-
15250
-
... More
Supply, installation and testing of 40W LED Post Top Lantern of Pure polyester powder coated die cast aluminium housing with PMMA clear diffuser for uniform illumination of make Jaguar Model Cat no. OGL-GRY-LGTP06R040XN Post Top 40W or equivalent with necessary support and connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor and all accessories as required and as directed.
-
15115
-
... More
Supply, installation and testing of 10W LED Bollard made of extruded aluminium housing to redefine landscapes with better light quality and enhance architectural design. Rated IP65. of make Jaguar Cat no OBL-GRY-LBLDCYL010XWor equivalent with necessary support and connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor and all accessories as required and as directed.
-
7203
-
... More
ESTIMATE FOR ELECTRICAL SUB-STATION WORK
-
-
-
... More
Non Schedule Item :- Supplying, installation testing and commissioning Electrical Sub station with the following rated copper wound out door type transformer complete all accessories like Drop out Fuse, Gang Operation switch , LA ,Stay Set channes, PSC pole ,metering Cabinate etc all all necessary LT & HT connections, earthing ,Fencing as required complete (excluding the cost of load security) 100 KVA,50Hz.11/0.433 KV. Oil filled transformer with Off Circuit tap change.
-
747353
-
... More
Load Security to be paid to APDCL for Approval & Charging of Transformer connecting to Mains
-
5500
-
... More
ESTIMATE FOR DIESEL GENERATING SET WORK
-
-
-
... More
Non Schedule Item :- Supplying including installation, testing and commissioning of Water Cooled 100KVA make Mahindra or Equivalent Diesel Generator set coupled to suitable alternator of 415 V, AC, 3-Phase 0.8 p.f. mounted on a 1) M.S. Fabricated base frame.,2) M.S. fuel tank of required capacity.,3) Residual Silencer.,4) Standard Control Panel.5) Suitable batteries with lead.,5) First fill of lube oil.,6) Acoustic Enclosure complete with all accessories as specified and directed by the department conforming to IS comprising the following Technical Specification.
-
1332137
-
... More
Supplying and fixing 200A FP Changeover Switch with enclosure of Legrand make TSE cat no 424196 on wall or Existing Angle Frame structure with all accessories complete with connections, testing and commissioning etc. as required.
-
37984
-
... More
SANITARY AND WATER SUPPLY ITEMS
-
-
-
... More
17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid
-
6941
-
... More
17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
-
3392
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approvedbmake and shade with 6 mm thick hard board backing :
17.32.1 Circular shape 450 mm dia
-
1248
-
... More
Providing and fixing toilet paper holder C.P. brass
-
680
-
... More
18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements,
weighing not less than 106 gms.
-
96
-
... More
17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
-
573
-
... More
17.72 - Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
-
204
-
... More
18.7 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall b) 18.7.2 20 mm nominal dia Pipes
-
325
-
... More
c) 18.7.3 25 mm nominal dia Pipes
-
408
-
... More
d) 18.7.4 32 mm nominal dia Pipes
-
500
-
... More
e) 18.7.5 40 mm nominal dia Pipes
-
674
-
... More
f) 18.7.6 50 mm nominal dia Pipes
-
927
-
... More
18.9 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 18.9.8 - 80 mm nominal dia Pipes
-
1990
-
... More
18.9.9 100 mm nominal dia Pipes
-
2811
-
... More
18.56 - Providing and fixing PTMT pillar cock of approved quality and colour. 18.56.2 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms
-
194
-
... More
18.16 Providing and fixing brass stop cock of approved quality : 18.16.1 15 mm nominal bore
-
303
-
... More
18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
-
9
-
... More
18.21 - Providing and fixing uplasticised PVC connection pipe with brass unions : 18.21.2 45 cm length 18.21.2.1 15 mm nominal bore
-
85
-
... More
17.28 - Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28.2 Flexible pipe 17.28.2.1 32 mm dia
-
104
-
... More
17.8 - Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
-
1500
-
... More
17.10.1.1 - Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
-
6008
-
... More
17.69.1 - Providing and fixing SS Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms
-
103
-
... More
18.8 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 18.8.2 - 20 mm nominal outer dia Pipes
-
513
-
... More
25 mm nominal outer dia Pipes
-
626
-
... More
18.9 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External Work 18.9.3 - 32 mm nominal outer dia Pipes
-
435
-
... More
18.9.6 - 50 mm nominal outer dia Pipes
-
811
-
... More
18.50.1 - Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore
-
715
-
... More
18.53 A - Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge
-
61
-
... More
FIRE FIGHTING
-
-
-
... More
18.7 - Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 18.7.1 - 25 mm dia
-
744
-
... More
18.7.2 - 32 mm dia
-
851
-
... More
18.7.6 - 80 mm dia
-
1885
-
... More
18.7.7 - 100 mm dia
-
2555
-
... More
18.7.8 - 150 mm dia
-
3574
-
... More
18.7.9 - 200 mm dia
-
5463
-
... More
18.9 - Supplying and fixing single headed internal hydrant valve with 1 No. 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type-A) with blank Gunmetal/Stainless Steel cap and chain as required: 18.9.1 - Single headed Gunmetal
-
7646
-
... More
18.11 - Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes required: 18.11.4 - 80mm dia
-
4982
-
... More
18.11.5 - 100mm dia
-
6667
-
... More
18.11.6 - 150mm dia
-
8960
-
... More
18.14 - Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required: 18.14.4 - 80mm dia
-
7691
-
... More
18.14.5 - 100mm dia
-
11050
-
... More
18.14.6 - 125mm dia
-
15912
-
... More
18.16 - Supplying and fixing 63mm dia, 15 m long RRL hose pipe with 63mm dia male and female couplings duly bound with GI wire, rivets etc conforming to IS 636 (type-A) as required: 18.16.1 - Gun metal
-
5202
-
... More
18.17 - Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.20mm nominal internal dia water hose thermoplastic(Textile reinforced) type-2 as per IS 12585 18.17.1 - 30m
-
8675
-
... More
18.17.2 - 40m
-
12073
-
... More
18.5.2 - Incoming, Outgoing, Main fire pump, Jockey pump, Diesel engine control, System Controller
-
287855
-
... More
18.21 - Providing, installation, testing and commissioning of 15 mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories 18.21.3 - Horizontal side wall sprinkler
-
617
-
... More
Supplying and fixing air vessel made of 250mm dia, 8mm thick MS sheet, 1200mm in height with air release valve on top and flanged connection to riser , drain arrangement with 25mm dia gun metal wheel vlave with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as fequired.
-
18244
-
... More
Construction of Boundary Wall
-
-
-
... More
2.8 - Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
2.8.1 All kinds of soil.
-
286
-
... More
4.1 - Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
4.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
-
6883
-
... More
11.1 - Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks:
11.1.1 1:4 (1 cement : 4 coarse sand)
-
937
-
... More
5.9 - Centering and shuttering including strutting, propping etc. and removal of form work for : 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete
-
307
-
... More
5.9.5 - Lintels, beams, plinth beams, girders, bressumers and cantilevers
-
608
-
... More
5.9.6 - Columns, Pillars, Piers, Abutments, Posts and Struts
-
804
-
... More
5.1 - Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)
-
8364
-
... More
5.2 - Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
-
10185
-
... More
6.13 - Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand)
-
1043
-
... More
13.6 - CEMENT PLASTER (IN COARSE SAND) 20 mm cement plaster of mix :
13.6.1 1:4 (1 cement: 4 coarse sand)
-
421
-
... More
13.46 - Finishing walls with Acrylic Smooth exterior paint of required shade :
13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
-
166
-
... More
5.22 A - Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.
-
89
-
... More
11.2 - Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.
-
733
-
... More
5.9.21. : Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick
-
699
-
... More
5.1 - Providing and laying in position specified grade of reinforced cement croncrete excluding cost of centering and shuttering.--All works up to plinth level. 5.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
-
7945
-
... More
6.1 - Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand)
-
6882
-
... More
13.6 - 20 mm cement plaster of mix :
13.6.2 1:6 (1 cement: 6 coarse sand)
-
401
-
... More
13.85 - Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.
13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
-
64
-
... More
13.60 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :
13.60.1 Two or more coats on new work
-
137
-
... More
10.1 - Supplying fitting and fixing double leaf heavy duty iron gate etc. complete.
-
93
-
... More
Site Development
-
-
-
... More
2.25a - Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
-
368
-
... More
Street Light With Led (As per Plinth Area)
-
150
-
... More
Solar Photo Voltaic Power Generation System: Supplying, installation, testing and commissioning of grid interactive roof top solar photo voltaic power generation system including space frame (As per Plinth Area)
-
55000
-
... More
Supplying, installation, testing and commissioning of IP based CCTV system for building security comprising of PTZ / fixed camera, cabling, digital recording , HD display system with minimum display of 5" x 8" per camera and hard ware software support - for indoors only
-
200
-
... More
For external surveillance (Rate applicable on total plot area minus plinth area at ground floor) (As per Plinth Area)
-
200
-
... More
EMERGENCY LIGHT & ILLUMINATED SIGNAGES: Illuminated signages (Rate applicable on total plinth area)
-
20
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%