Public Works Roads Department Tender

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Bituminous Concrete.( Providing and Laying bituminous concrete with 100-120TPH batch each type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder @5.4 to 5.6% of mix and filler transporting the hot mix to work sitelaying with a hydrostatic paver finisher with sensor control to reqd. grade ,level and alingment rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl.no.509 complete in all respect (including carriage of mixed materials up to 10.00Km initial lead from mixing plant)( including cost of testing of materials at site and laboratory as directed by the deptt.)& anti stripping agent as per IS:14982(Refer Appendix-5 of MoSRT&H specification)with 60/70 or VG-30 Grade bitumen forGrading-II(13mm nominal size)

Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250gms per sqm area,thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be levelled ,uniform and free from streaks and holes and confirming to the MoSRT&H specification.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (iii) 900 mm side octagon)

Providing ‘Sparkle Solar Road Studs, manufactured by Tata B.P. Solar India Ltd. Of size (125mmx125mm), 90mm height (from bottom of shank to the top of stud) with detachable battery, m6LEDs-three on each side for Bi-directional studs/3 LEDs on one side for unidirectional studs, ultra bright LED in amber and red colour, weight per stud 700+25 gms, flash rate of 50-65 times per minute completely water resistant and weather proof with replacement warranty and free maintenance fro one year from the date of installation of stud on road-(installation should be made using adhesives and procedures recommended by manufacturer under the supervision of their competent technician).::15580::8.47.b :: b) Uni-directional Stud-

Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701

HUMP TYPE SPEED BREAKER FOR 5.50 m CARRIAGEWAY

Providing ‘Sparkle Solar Road Studs, manufactured by Tata B.P. Solar India Ltd. Of size (125mmx125mm), 90mm height (from bottom of shank to the top of stud) with detachable battery, m6LEDs-three on each side for Bi-directional studs/3 LEDs on one side for unidirectional studs, ultra bright LED in amber and red colour, weight per stud 700+25 gms, flash rate of 50-65 times per minute completely water resistant and weather proof with replacement warranty and free maintenance fro one year from the date of installation of stud on road-(installation should be made using adhesives and procedures recommended by manufacturer under the supervision of their competent technician).::15580::8.47.b :: b) Uni-directional Stud-

Providing ‘Sparkle Solar Road Studs, manufactured by Tata B.P. Solar India Ltd. Of size (125mmx125mm), 90mm height (from bottom of shank to the top of stud) with detachable battery, m6LEDs-three on each side for Bi-directional studs/3 LEDs on one side for unidirectional studs, ultra bright LED in amber and red colour, weight per stud 700+25 gms, flash rate of 50-65 times per minute completely water resistant and weather proof with replacement warranty and free maintenance fro one year from the date of installation of stud on road-(installation should be made using adhesives and procedures recommended by manufacturer under the supervision of their competent technician).::15580::8.47.b :: b) Uni-directional Stud-

Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250gms per sqm area,thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be levelled ,uniform and free from streaks and holes and confirming to the MoSRT&H specification.

HUMP TYPE SPEED BREAKER FOR 7.00 m CARRIAGEWAY

Dense Graded Bituminous Macadam(DBM) Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 per cent by weight of total mix & filler transporting the hot mix to work site laying with a hydrostatic paver finisher with sensor control to the reqd grade level and alignment rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl no 507 complete in all respect(including carriage of mixed materials upto 10.0km initial lead from mixing plant)(including cost of testing of materials at site and laboratory as directed by deptt.) (b)With rock dust as filler(refer table 500-9 of MoSRT &H specification) (A) with 60/70 or VG-30 grade bitumen (ii) for grading II(19mm nominal size)

Providing reflecting pavement marker wit Micro Prismatic Lens in both direction having thermoplastic body adhering to the specification and Guidelines MoSRT&H's fixed to the road surface using the adhesives and procedures recommended by the manufacturers with three months replacement warranty and free maintenance

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (ii) 600 mm circular)

HUMP TYPE SPEED BREAKER FOR 3.75m CARRIAGEWAY

Bituminous Concrete.( Providing and Laying bituminous concrete with 100-120TPH batch each type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder @5.4 to 5.6% of mix and filler transporting the hot mix to work sitelaying with a hydrostatic paver finisher with sensor control to reqd. grade ,level and alingment rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl.no.509 complete in all respect (including carriage of mixed materials up to 10.00Km initial lead from mixing plant)( including cost of testing of materials at site and laboratory as directed by the deptt.)& anti stripping agent as per IS:14982(Refer Appendix-5 of MoSRT&H specification)with 60/70 or VG-30 Grade bitumen forGrading-II(13mm nominal size)

Road Furniture

Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250gms per sqm area,thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be levelled ,uniform and free from streaks and holes and confirming to the MoSRT&H specification.

Dense Graded Bituminous Macadam(DBM) Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 per cent by weight of total mix & filler transporting the hot mix to work site laying with a hydrostatic paver finisher with sensor control to the reqd grade level and alignment rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl no 507 complete in all respect(including carriage of mixed materials upto 10.0km initial lead from mixing plant)(including cost of testing of materials at site and laboratory as directed by deptt.) (b)With rock dust as filler(refer table 500-9 of MoSRT &H specification) (A) with 60/70 or VG-30 grade bitumen (ii) for grading II(19mm nominal size)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (i) 900 mm equlateral triangle)

Bituminous Concrete.( Providing and Laying bituminous concrete with 100-120TPH batch each type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder @5.4 to 5.6% of mix and filler transporting the hot mix to work sitelaying with a hydrostatic paver finisher with sensor control to reqd. grade ,level and alingment rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl.no.509 complete in all respect (including carriage of mixed materials up to 10.00Km initial lead from mixing plant)( including cost of testing of materials at site and laboratory as directed by the deptt.)& anti stripping agent as per IS:14982(Refer Appendix-5 of MoSRT&H specification)with 60/70 or VG-30 Grade bitumen forGrading-II(13mm nominal size)

Providing reflecting pavement marker wit Micro Prismatic Lens in both direction having thermoplastic body adhering to the specification and Guidelines MoSRT&H's fixed to the road surface using the adhesives and procedures recommended by the manufacturers with three months replacement warranty and free maintenance