Housing Directorate Tender

Incoming: a) S & F of 415V, 63 A FPMCB of breaking capacity 10KA & C Characteristics on DIN rail of Existing DBs and necessary connection with enclosurewith sheet steel enclousure-1 Nos.

Brick Pillar: Charges for making Brick Piller of size (10”x10”x3’) above Gr. Level incl. cement plaster -2nos

outgoing: S&F 415 V, 32 A TPMCB of breaking capacity 10KA & C Characteristics on DIN rail of Existing DBs and necessary connection with enclosurewith sheet steel enclousure-2 Nos.

Supply and fixing of G.I. bend 25mm

a)Laying of cable as below after cutting floor /Pavment /Wall and making holes incl. ,embedding the cable at an average depth as below and mending goods the damages to original finish incl. removing the rubbish from 2.5 sq-mm to 35 sq-mm at an average depth of 75 mm in floor/ pavement/wall ect.

Busbar: S & F 500V ,100A Capacity of size 15 X 3 mm 4 Nos Cu Bar of required size porcelain chairs incl. Hylum sheet behing Cu bar.

Supply and fixing of G.I. short piece of TATA make (Above 50mm & upto150 mm long) -- 25 mm

h) S & F 6 Amp SPMCB for indicating lamp(approved make) -- 3 set.

Supply & fixing of G.I. short piece of TATA make (Above 50mm & upto 150 mm long) 50 mm dia

S/F rubber insertion cloth for flanges. 25 mm

Add G.S.T 18% on aggregate amount of BOQ item No 1.00 to 31.00

S/ F 50 mm dia rest pedestal having welded clamp on top end & M.S plate under bottom end & Strengthening by 4:2:1 C.C foundation.

Supply & fixing of galvanised iron socket with I.S.I. mark. 50 mm dia

Supply and Installation 440 V , 50 HZ ,2900 RPM 05 HP Submersible Pump Motor set with necessary special type tools & tackles incl chain pully , tripod stand (Make:KSB UQD-152/8 + UMAI 150 -3/22)

Charges for making Brick Piller of size (10”x10”x3’) above Gr. Level incl. cement plaster -2nos

Supply & fixing of G.I. union make ISI 50 mm dia

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required 40 mm dia

Supplying, fitting and fixing chech valve (vertical) G.M. tested to 21 kg per sq. cm --- 40 mm

j) S&F EI Danger board ----- 01 item. All the accessories are fixed on a common industrial panel made by suiatable size angle & flat iron frame and all the electrical equipment are interconnected by suiatable size copper wire incl necy. socketing as per direction of EIC.

a)Laying of one No cable upto 35 sq-mm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Making necessary arrangement of fixing Pressure gauge of 100 mm dia with 20mm dia G.I specials and G.M ball valve/ Bush Ball Valve

e) S & F three phase panel mounted Digital Voltmeter (0-500 Volt) in 96 x 96 sq.mm. flush mounted case (make l&t WL132010OOOO ,).1 set.

S/F of 1200mm dia M.S well cover with suitable size of hole for entering 50 mm dia column pipe and 25 mm dia cable protection pipe inside the tube well.

Charges for making flat cable jointing

Supply & fixing of G.I. plain equal elbow of approved brand and make ISI 50 mm dia

C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 and having all cast iron components as per I.S. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 MT per sq. cm. Spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conforming to I.S. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise direction, fitted and fixed complete. 50mm

S & F compression type cable gland , complete with brass gland , bruss ring and rubber ring for dust and moisture proof entry of XLPE/PVC armoured cable size 4 core 16 sq.mm as par G.S.

Supply and Fixing 50 mm dia GI flange (Make- HB)

Supplying, fitting and fixing of G.M. Gate Valvel Throttle Valve as per IS:778. G. M. Valve 2"

i) S & F MN 16, FASD starter ( LT make, Cat No. SS 94362) relay range (9--15 A) 1 set.

a)Supply only 1.1 kv gr. 4 core X 16 sq.mm. PVC /Al. cable from panel to piller box. (Mk: Havells/Gloster/Polycab/KEI)

m) Interconnection with 6 sqmm & 1.5 sq. mm pvc insulated unsheathed stranded copper wire as required ….

Supply only 440 V , 50 HZ ,2900 RPM 05 HP Submersible Pump Motor set (Make:KSB UQD-152/8 + UMAI 150 -3/22)

k)Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8watt CFL / 100 watts GLS lamp complete set incl S/F 5 A piano switch on 100 mm x 100 mm x 65 mm MS Box incl cover & connection as to GS

Add LW Cess 1% on aggregate amount of BOQ item No 1.00 to 31.00 (after add G.S.T 18 %)

Supply, fabrication and installation of outdoor type pillar box(1200X900X600)mm in size fabricated from 3mm thick rust proof M.S. sheet with all necessary M.S angle (50X50X6)mm & M.S. flat (25X6)mm properly welded at all adges for the body and upper portion & bottom portion with 10mm thick M.S plate Supply & Installation of M.S. fabricated O.D. type feeder pillar box having overall dimention of 1200 mm x 900 mm x 450 mm . the body & upper portion of the pillar box made of 3 mm thick M.S. Shet & bottom portion with 10 mm. thick M.S. Plate rigidly fixed by nuts, bolts & washer etc. with 50 mmx 50 mm x 6 mm M.S. Angle & 25 mm x 6 mm M.S. Flat. The pillar box having both sides opening with suitable handle in each door with double locking arrangement is to be provided with Godrej Almirah type lock with 3 nos. key. additional provision for pad locking & supply of Godrej Navtal duplicate key lock is also to be provided mechanical locks with top & bottom. Provision for ventilation grill should be rectangular shape made of M.S. Plate duly welded to lateral sice. The central ventilation spout at starting surface of the top pillar box. Provision for 2 nos. earthing terminal 25x6 mm G.I. Flat having suitable nuts, bolts, washer for connecting the accessories. Necessary interconnection between incoming & outgoing surface by suitable size Cu. Flat/wire duly sleeved & insulated. Finishing the end by socketing & providing glands as required. The pillar boxboth inside & outside is to be painted with two coats of Aluminium paint over one coat of red lead primer & M.S/ISMC. Channel of size 75 mm x 40 mm x 4.9MM with nuts & bolts at bottom portion with two coats of black annealed paint after finishing the surface properly. The internal E.I. works of pillar box should be suitable to withstand 2 KV. for one minute. The all fabrication work should be done as per direction of E.I.C. The pillar box comprising with the following:-

S/F 2.5 sq mm flat PVC insulated Cu 3 core cable of Finolex make

Soil Excavation : Excavation of soil for installation of Earth Electrode and filling & ramming For Soft Soil - 1 cumt. Earthing Installation – with Pipe Electrode : Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

f) S & F three phase panel mounted Digital Ammeters in 96 x 96 sq.mm. flush mounted case (make l&t WL131010OOOO..1 set.

Supply and fixing of G.I. plain tee of approved brand and make ISI 50 mm dia

j) S & F E.I. Danger board 15 cm x 10 cm (6"x4")------1 no.

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required 25 mm dia

S/F of Heavy type holding clamp for holding 32 mm dia column pipe with pump motor set at an average depth of 80 - 100mtr.

Supply and fixing of G.I. union 25mm

outgoing: S&F 415 V, 32 A DPMCB of breaking capacity 10KA & C Characteristics on DIN rail of Existing DBs and necessary connection with enclosurewith sheet steel enclousure-2 Nos.

Supplying of flexible wire rope of good quality 6 mm dia. at site.

d) S & F C.T. coil (100/5 Amp.) A.E/Kappa make………………………3 nos.