Public Works Building And NH Department Tender

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content: With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete: Size of Tile 1000x1000 mm

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge: Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

Providing fitting fixing PVC Panels for wall and ceiling (Plain) with material & installation including labour,carriage etc as directed and specified

Providing erecting cutting and fixing of 420mm depth free standing file cabinet/rack with laminated finishing erected/making to be made with 19mm thick greenplywood on all frames structure and required partition with member as per required height with providing fixing of edged binding in all plywood edges cutting and pasting with fixing for 1.5mm decorative laminated sheet in both sides of ply surfaces including all hardware fittings like nails fevicol pasting tape handle lock hinges tower bolt manget catcher etc as a complete with all neccessary required material and labour as directed by the concern department.

Providing, fitting and fixing Decorative Partition Wall of Size 2.14x 2.00x0.16 made of green ply board, Vinear, Etching Glass fitted with all fittings, complete in all respect as specified and directed by the Department .

Providing fitting fixing carpet for floor (plain) with material installation including labour, carriage etc as directed and specified

Supplying, fitting and fixing Johnson Zebra Roller Blinds (Combi Blackout) make and shade, design as per choice complete as specified and directed by the department at all levels.

Providing fitting and fixing of Wooden Flooring (Nobile Laminate flooring, BVG) with under layer of 6mm materials & installation including labour, carriage etc as directed and specified

Installation of Wall paneling with acoustical Fabric

Providing and installation of Ashok Stambh

Providing and Installation of Corian

Providing and installing Deluxe Chair. Make:Godrej Vurv Mid Back Knitted Fabric Mesh Ergonomic Office Chair

Providing and installing Executive Chair.Make : Godrej Ace Full back Chair or Equivalent

Providing and fixing Jaquar Wash basin (ARIA) as per field requirement.

Providing and fixing Jaquar Lyric Piece Closet with Seat cover requirement.

Providing and fixing Jaquar Soap Dispenser (Square)

Providing and fixing Jaquar Mirror (Square)

Providing and fixing Jaquar Kubix 2 way bib cock

Providing and fixing Jaquar Pillar Cock

Providing and fixing Jaquar Kubix A/S/ cock

Providing and fixing Jaquar Toilet Paper Holder

Providing and fixing Jaquar Health Faucet

Providing and fixing Jaquar Shower tube

Providing and fixing Jaquar Shower hook

Providing and fixing Jaquar Towel Ring Square

Providing and fixing Bolt Touch free Infrared hand Dryer

Providing and installing 2 Seater Sofa.Make:GODREJ JINERIA NX/RIO 2 SEATER SOFA

Providing and installing Artwork Display Painting

Providing and installing 3 Seater SS Bench

Providing and installing CentreTable.Godrej Nebue Storage Coffee Table

Supplying and instalation of TV LG Type/Category/Class of TV set Smart TV(2) Actual Screen Size(inches) 86 LED (Light EmittingDiode) (86UT801C)

Providing and commisioning of Ligthing Fixtures 16W complete with all accessories including driver into the False ceiling mounted with necessary support and connection with 1.5sqmm PVC insulated SC copper conductor as required and as directed by the engineer in charge. Make: Crompton (CDR-208-15-57-SL-NWH) or Equivalent

Providing and commisioning of Linear Strip light 5M complete with all accessories including driver into the False ceiling mounted with necessary support and connection with 1.5sqmm PVC insulated SC copper conductor as required and as directed by the engineer in charge.Make: Crompton :Linear Strip light 5M (FlexiStrip5MIP2024V/2LED830Mod V1+CVD Driver24V2A) or Equivalent

Providing and commisioning of Exhaust Fan complete with all accessories including driver into the False ceiling mounted with necessary support and connection with 1.5sqmm PVC insulated SC copper conductor as required and as directed by the engineer in charge.Make: Havells Ventil Air Hush or Equivalent.