Public Works Building And NH Department Tender
... More
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Public Works Building And NH Department - PWDBNH Tender
Civil And Construction
Building Construction
Eprocure
Opening Date25 Mar 2025
Closing Date22 Apr 2025
Tender Amount₹ 1,52,93,035
Costs
EMD
₹ 3,05,861Document Cost
₹ 3,100Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWBNH_43687_1Tender No
SE/BII/DGP_OFFICE_BLDGTender Authority
Public Works Building And NH Department ViewPurchaser Address
-Website
http://https://pwdbnh.assam.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
7.24
-
-
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):Treatment of soil under existing floors using chemical emulsion @one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2(1 cement : 2 Coarse sand) to match the existing floor:
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
52
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling & dressing & finishing the top smooth.
20
-
-
... More
Centering and shuttering including strutting, propping etc. and removal
of form for
Foundations, footings, bases of columns, etc. for mass concrete
24.31
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
26.83
-
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
8
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
3181.03
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
1958.4
-
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level
Concrete of M25 grade with minimum cement content of 330 kg /cum
13.22
-
-
... More
All works above plinth level upto floor V level
Concrete of M25 grade with minimum cement content of 330 kg /cum
16.32
-
-
... More
Designing, Providing, installing and fixing factory finished customed design pregalvanized high tensile steel joists manufactured from G350 Z275 confirming to IS:277-1992, minimum coating of galvanizing 275gm/sqm, minimum yield stress 35 MPa & minimum tensile strength of 380 MPa placed 1.23 metre apart to support the load of slab etcas per the design & directions of Engineer-in-Charge.
15605.1
-
-
... More
Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam,column, joists etc. & concrete of different grade as per design will be paid separately).
180.21
-
-
... More
Centering and shuttering with 12mm thick shuttering plywood confirming to IS 4990:2011 and removal of form at all heights. Plywood will be supported on lock bars.
Suspended floors, roofs, landings, balconies and access platform.
180.21
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
Cement mortar 1:6 (1 cement : 6 coarse sand)
106.02
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
Cement mortar 1:3 (1 cement :3 coarse sand)
215.91
-
-
... More
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
215.91
-
-
... More
12 mm cement plaster of mix :
1:6 (1 cement: 6 coarse sand)
832.06
-
-
... More
15 mm cement plaster on rough side of single or half brick wall of mix:
1:6 (1 cement: 6 coarse sand)
884.74
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2208.99
-
-
... More
Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
Two coats
1468.48
-
-
... More
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied@ 2.20kg/10 sqm
436.32
-
-
... More
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc.complete.
8.58
-
-
... More
Providing and fixing approved brand and manufacture SS 304 grade Top & Bottom Patch fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.
6
-
-
... More
Providing and fixing approved brand and manufacture SS 304 grade H type 900mm Pull Handle with 32mm dia fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.
6
-
-
... More
Providing and fixing approved brand and manufacture SS 304 grade Glass to Glass Lock Round type with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.
3
-
-
... More
Providing and fixing approved brand and manufacture SS 304 grade Floor spring (weight approx 100-120kgs) fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.
3
-
-
... More
Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.(Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
Fixed window / ventilator made of (small series) frame 47 x50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)
70.79
-
-
... More
Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).
36
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
106.81
-
-
... More
Providing and fixing fly proof stainless steel grade 304 wire gauge,to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.
With 12 mm mild steel U beading
18
-
-
... More
Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.
Upto 5mm depth and 5 mm width
192.26
-
-
... More
Providing and fixing 50 micron thick Etching strips (film) over glass Non-fade, self adhesive,easy to cut and trim to size and easy to install, of approved make and manufacturer, fixed as per manufacturer's specifications and as specified in Arch. drawing, all complete in all respects as per direction of the Engineer-in-charge.
14.4
-
-
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
40 mm thick with 20 mm nominal size stone aggregate
159.73
-
-
... More
Providing and laying Laminate wooden flooring (Grade AC4, 8 mm thick Ambience Premium-AC4 ), having a good backing layer made up of plastic laminate or melamine as specified by the manufacturer and approved by Engineer-incharge.
Wooden flooring
198.52
-
-
... More
Wooden flooring Skirting same as above
12.12
-
-
... More
Floor strip on edges 20% of Wooden flooring
10.26
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
Size of Tile 600x600 mm
185.15
-
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete.
Size of Tile 600x600 mm
12.58
-
-
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete.
20.96
-
-
... More
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
79.67
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed fromM.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
295.79
-
-
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8mm drop; made of G I sheet having galvanizing of 100gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
10.52
-
-
... More
Opaque Roller Shades : Providing & fixing of Blackout Roller Blinds fabric made up of 100% Polyester with Acrylic coated of 0.32mm(PVC free) of thickness 0.50mm ±5% and wieghing 270-295gsm with openess factor of 0% .Shrinkage % Warp0.5 & Weft 0.5,Color fastness5-6. The control clutch drive unit engineered heavy duty chain drive pulley operating system consisting of gear clutch housing and locking plug containing minimum 6 ribs and inserted at minimum of 37mm into roller tube. It is self-lubricating Exclusive clutch with safety pins for secure bracket installation and unlocking pin for quick manual removal. Universal clutch is most convenient for large windows down to the smallest windows. It shall be driven by a ball chain pulley with ball chain and can be positioned at Right hand or Left hand side of the shade. Clutch gear ration 1.75:1 for reduced operating force on larger blinds. Tube bearing plug idler Exclusive self-lubricating spring loaded plastic bearing end plug with positive locking wheel allows for adjustment and provides for a secure installation and removal of shade. Tube bearing plug contain minimum 6 ribs and inserted a minimum of 37mm into roller tube.
Mounting hardware brackets universal brackets including end plug bracket with lock down retainer device. Brackets finish of powder coated metal installation brackets made of stamped and hardened steel with 46mm projection for wall, ceiling and side fitting with screws and end cap covers. Roller tube circular-shaped aluminum tube extruded from alloy 6060 and temper T66 – EN755 of 37mm inside diameter and outside diameter 40.2mm extruded tube to have a 1.6mm wall thickness with standard anodized natural finish. Heavily reinforced with minimum six internal ribs providing additional tensile strength and allows for secure placements of clutch and end plug. Bottom rail flat-shaped extruded aluminum from alloy 6060 and temper T66 – EN755 of dimension 13mm * 30mm and wall thickness of 1.5mm and weight of 390g/m. Rail standard finish of powder coat white color and provided cover. Ball chain shall be 2mm diameter cord with 4.5mm diameter acetal balls molded coaxially to it on 11.8mm pitch to form an endless ball chain. It is used for raising or lowering action of the shades. Plastic parts all plastic components are UV-stable compounds available white colour.
105.45
-
-
... More
Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS :12823 marked, including priming coat on unexposed arrangement and screws etc.complete:
18mm thick
49.26
-
-
... More
Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge.
57.61
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
175.86
-
-
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
1.36
-
-
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
In cement mortar
4.76
-
-
... More
Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
Of area 3 sq. metres and below
1
-
-
... More
Of area beyond 3 sq. metres
2
-
-
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading,transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
6.13
-
-
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
54.43
-
-
... More
Grading roof for water proofing treatment with
Cement mortar 1:4 (1cement : 4 coarse sand)
2.72
-
-
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
In 75 x75 mm deep chase
20.93
-
-
... More
Providing and fixing white vitreous china extended wall mounted water closet of size 350 X 545 X 380mm of approved shape including providing and fixing of concealed cistern with duel flush fitting (2.0/4.0 lts. per flushing), including sheet cover, and cistern fittings, nut bolt gasket,chair etc complete.
2
-
-
... More
Providing and fixing white vitreous china Oval shaped wash basin for top/under counter mounting with 15 mm C.P. brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls whereever required. White Vitreous China Oval shaped Wash basin size 545 x 545 x 180mm with 15mm CP Brass single hole basin mixer with flow rate 2.5 litre per minute at 3 bar .
2
-
-
... More
Providing and fixing hand shower (Health faucet) with 1.2mtr long with 8mm dia Easy Flex Tube with wall hook and flow restrictor with flow rate 6 litre per minute at 3 bar in chrome finish and wall hook.
2
-
-
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
2
-
-
... More
Providing & fixing C.P Brass Shower Rose With 15 or 20 mm inlet :
100 mm diameter
2
-
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
2
-
-
... More
Providing & fixing toilet paper holder
C.P. brass
2
-
-
... More
Providing and fixing soil waste and vent pipes 100 mm dia.
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
50
-
-
... More
Providing and fixing M.S. holder-bat clamps of approved design to sand cast iron/ centrifugally cast iron(spun) pipes embedded in and including cement concrete blocks 10x 10 x 10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls, etc.
For 100mm dia pipe
18
-
-
... More
Providing and fixing bend of required degree with access door insertion rubber washer 3mm thick, bolts and nuts complete
100mm dia
Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
12
-
-
... More
Providing and fixing plain bend of required degree:
100 mm dia
Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
12
-
-
... More
Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe
100 mm
SS 304 grade coupling with EPDM rubber gasket
20
-
-
... More
Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipe of diameter:
100mm
20
-
-
... More
Providing and fixing trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent, arm complete, including cost of cutting and making good the walls and floors.
100mm inlet and 100mm outlet
Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
2
-
-
... More
Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe.
Total bracket length 580 mm of approved shape and design (for single 100 mm dia pipe)
5
-
-
... More
Total bracket length 810 mm of approved shape and design (for two 100 mm dia pipes)
5
-
-
... More
Providing & fixing Nickel Chromium Plated liquid soap container/dispenser with metallic bottle of approved brand & make 112 mm distance from wall of standard shape with bracket (Nickel chromium plating should pass Salt Spray Test for 200 hours) of the same materials with snap fittings of approved quality and colour, complete as per direction of Engineer in Charge.
2
-
-
... More
Providing, Fixing of CP brass Towel Ring with CP brass wall brackets and providing & fixing CP brass screws complete as required.
2
-
-
... More
Providing and fixing CP brass single lever low flow wall mounted Sink mixer with 15 mm CP brass single lever swivel spout with waste complete with flow rate 2.5 litre per minute at 3 bar including cutting and making good the walls where required.
1
-
-
... More
Providing,Fixing wall mounted Double Coat hook on door complete.
2
-
-
... More
Providibng and fixing straight type Macfit single body push fit type WC pan connector with factory supplied spring loaded seal guard of McAlpine, UK with integral single mould sealing fins made of flexible EVA body, including bush/adaptor for use with C.I. Pipe as supplied with the pan connector.
2
-
-
... More
Providing and fixing SS Grating of 125 mm dia of approved quality and colour complete as per direction of engineer in charge. Circular Type
125 mm nominal dia with 25 mm waste hole
4
-
-
... More
Supplying fitting and fixing Ajoy Flowguard CPVC (Chlorinated Polyvinyl Chloride) pipes having thermal stability for hot and cold water supply including all CPVC Plain and bruss threaded fitting including clamps at 1.00 m spacing including joining of pipes and fitting with one step CPVC solvent cement and testing of joints complete at all levels as directed and spcified (In Terrace & Shaft- Hot Water Supply)
(Note: Ball Valve and union will be charged extra and does not comes under Accessories)
In internal Wall - Exposed on Wall 15 mm nominal dia Pipes
35
-
-
... More
20 mm nominal dia Pipes
25
-
-
... More
25 mm nominal dia Pipes
25
-
-
... More
32mm nominal dia Pipes
15
-
-
... More
40 mm nominal dia Pipes
8
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved
quality (screwed end) :
20 mm nominal bore
2
-
-
... More
25mm nominal bore
1
-
-
... More
32mm nominal bore
1
-
-
... More
40mm nominal bore
1
-
-
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :
45 cm length
15 mm nominal bore
6
-
-
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand :10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
500
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
15mm nominal bore
4
-
-
... More
Providing and fixing C.I. double acting air valve of approved qualitywith bolts, nuts, rubber insertions etc. complete (The tail pieces,tapers etc if required will be paid separately) :
50 mm dia
1
-
-
... More
Providing and fixing motorised butterfly valve with Control Panel & Float Type Magnetic Level Sensors suitable for 220-230 volts AC to operate valve when water level is low in tanks and to close when water level is high in water tanks including necessary cables, conduits, upto junction box (upto 6 mt qty approx.) etc., complete.
25mm dia
1
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :
300 mm diameter S.W. pipe
8
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
180x150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
-
-
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete:
300 mm dia. R.C.C. pipe
8
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions,total weight of cover and frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) :
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
4
-
-
... More
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
... More
Extra for depth for manholes:
Size 90 x 80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete:
For pipes 350 to 450 mm diameter
1
-
-
... More
Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450mm precast RCC horizontal grating with frame complete as per standard design.
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
6
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch modular plate suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as required.
Group C
25
-
-
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
Group C
39
-
-
... More
Wiring for power plug points with 2 x 4 sq.mm. FRLS PVC insulated, Cu. Conductor, single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq.mm. FRLS PVC insulated copper conductor single core cable for loop earthing as required.
160
-
-
... More
Wiring for light plug points / power plug points with 4 x 4 sq.mm. FRLS PVC insulated, Cu. Conductor, single core cable in surface/ recessed medium class PVC conduit along with 2 Nos. 4 sq.mm. FRLS PVC insulated copper conductor single core cable for loop earthing as required.
160
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2 x 1.5 sq.mm. + 1 x 1.5 sq.mm. earth wire.
74
-
-
... More
2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth wire.
390
-
-
... More
2x10 sq. mm + 1x6 sq. mm earth wire
75
-
-
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
75
-
-
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
14
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
19
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required.
14
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
12
-
-
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet (near equipment point) and 25 A modular SP MCB, “C” curve (at accessible point) including connections, painting etc. as required.
8
-
-
... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.
50
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
1.06
-
-
... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
14
-
-
... More
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.
TV antenna socket outlet
2
-
-
... More
Supplying and fixing of following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
1or 2 module (75mmx 75mm)
2
-
-
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
360
-
-
... More
Supply, erection, testing and commissioning of following sizes of splitter of aluminium die cast body in suitable size of G.I. Box.
6 way
1
-
-
... More
Supply, Installation, Testing & Commissioning of CAT 6 UTP Universal (both tool & toolless) information outlet (I/O).
34
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
850
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
25 mm
605
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door
3
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
6 Way (4+18), Double Door
3
-
-
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
1
-
-
... More
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required.
3
-
-
... More
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface / recess, complete with testing and commissioning etc.as required.
For 6 way, Double door TPN MCBDB
3
-
-
... More
Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.
1
-
-
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
66
-
-
... More
Triple pole (used as 25A TP MCB)
12
-
-
... More
Supplying and fixing following rating, double pole, 240 volts, MCB complete with connections, testing and commissioning etc. as required.
40 Amp DP MCB
3
-
-
... More
Supplying and fixing of following rating, 240/415 volts, "C" curve, four pole miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
40 Amp FP MCB
3
-
-
... More
Supplying and fixing of following rating double pole (Single phase and neutral) 240 volts, residual current circuit breaker (RCCB), having a current sensivity current 100 miliampere in the existing MCB DB complete with connections, testing & commissioning etc. as required.
40 Amp
12
-
-
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
1.32
-
-
... More
Supply, installation, testing & commissioning of Recess mounted LED downlighter fitting, Luminaire having minimum lumen output of 1500 lumens, CCT 4000K/5700K to 6500K and system efficacy better than 100 lumen/ watt with opal diffuser in polycarbonate complete with Pressure die cast aluminium Housing, THD ≤ 10%. Service life of 50,000 hrs @ L 70 with inbuilt protection against short circuit, over voltage protection and surge protection of up to 2 KV including connections etc complete as required.
17
-
-
... More
Supply, installastion, testing & commissioning of Recess 2 feet x 2 feet LED fitting having a lumen output not less than 4200 lumens, CCT 4000- 5700-6500K and LED efficacy better than 120 lumen/ watt with moulded PMMA glare free optimum light transmission diffuser, CRCA Housing and life of 50K burning hours(L 70) at 30 deg , THD ≤ 10%, CRI better than 80 with inbuilt protection against short circuit, over voltage protection and surge protection not less than 2KV including connections etc. as reqd.
28
-
-
... More
Supply, installastion, testing & commissioning of LED bulkhead fitting light having minimum lumen output of 800 lumens, IP 65, CCT 5700-6500 K and system efficacy better than 80 lumen/Watt with opal diffuser in polycarbonate complete with powder coated Pressure die cast aluminium Housing, life of 50K burning hours (L 70), THD ≤ 10%, CRI better than 80 with inbuilt protection against short circuit, over voltage protection and surge protection of up to 2 KV including connections etc. as reqd.
4
-
-
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
14
-
-
... More
Supplying and fixing of 250 mm sweep Exhaust fan with all accessories suitable for operation single phase 230 volt 50 cycle per second per sec. AC supply etc. as required. in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning earthing etc. as required.
1
-
-
... More
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.
18
-
-
... More
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED metallic cover complete with all connections etc as required.
13
-
-
... More
Supplying, installation, testing & commissioning of fault isolator complete with base as required.
1
-
-
... More
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
180
-
-
... More
Supply, Installation, testing & commissioning of Split type 5-star/Inverter ductable air conditioning unit, each comprising of outdoor unit and modular type ducted indoor unit.Outdoor condensing unit shall comprise of single/ multiple , rotary / scroll compressor & air cooled condenser with fan & motor. Evaporating unit shall consist of a blower section with dynamically balanced cenrtifugal blower driven by induction motor, multirowsdeep copper cooling coil with aluminium fins, thermostatic expansion valve, sequential controller etc. The evaporating unit shall be equipped with synthetic fibre filter s, insulated drain pan, safety controls, thermostat, suitable for refrigerant CFC free R 410A all complete in a unit. The enclosure shall be factory painted to a smooth finish. The quoted price shall be inclusive of vibration isolator pads/ vibration isolators and associated electrical cabling & earthing between indoor & outdoor units and MS duly painted base frame.
The units shall be suitable for 230 v+ - 10 %, 50 Hz supply & complete with electrical controls & panels.
3.0 TR Ductable Split Ac (1200 CFM)
1
-
-
... More
4.3 TR Ductable Split Ac (1700 CFM)
1
-
-
... More
1.5 TR Ac (600 CFM)
1
-
-
... More
Supply, Installation, testing & commissioning of Air Cooled Invertor Split type wall mounted 5 Star Air conditioners with evaporating unit comprising of cooling coil, blower with motor and condensing unit comprising hermetically sealed scroll compressor, condenser coil, and propeller fan. Unit shall be complete with controls, interconnecting copper refrigerant piping with insulation, drain pipes and electrical cabling etc. between evaporative and condensing unit, refrigerant gas and oil and complete as per specifications. The unit shall be suitable for operating on 240 volt, 1 phase, 50 Hz AC supply with five star energy rating. The units shall be suitable for chorded remote operation. The refrigerant piping & cabling shall run in PVC sleeve Steel supporting structure for outdoor units suitable for wall mounting / floor mounting. The enclosure shall be factory painted to a smooth finish. The quoted price shall be inclusive of vibration isolator pads/ vibration isolators and associated electrical cabling & earthing between indoor & outdoor units and MS duly painted base frame.
The units shall be suitable for 230 v+ - 10 %, 50 Hz supply & complete with electrical controls & panels.
Capacity : 1.0 TR (400 CFM)
2
-
-
... More
Supply,installation,testing and commissioning of UPVC drain piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell expanded polythene. 25 mm ID
30
-
-
... More
32 mm ID
20
-
-
... More
Supply, installation, testing and commissioning of propeller type fan with Al./SS blades and complete with induction Motor suitable for operation with 230 V single phase 50 Hz with suitable frame etc. as per IS:2312-1967 with gravity dampers for exhaust complete as per specifications and drawings.The unit shall be compatible with BMS System and complete in all respect.The quoted price shall consist of mounting arrangemnt for the fan. The maximum sound level of unit shall be 60dB(A) @ 3 m from source.
100CFM
2
-
-
... More
Supply. Installation, testing and commissioning of factory fabricated GSS Sheet metal ducts with flanges, inbuilt sealant, gasket, supports, vanes, dampers, links, levers and quadrants etc. as per specifications and drawings. Duct shall be furnish at site in "L" shape or box shape from factory. The rates shall include all materials of the duct and labour for suspension and supporting arrangement for plenums, ducts, complete with fire retardant flexible connection as required and as per specifications.
0.63 MM (24 Gauge )
80
-
-
... More
0.80 MM (22 Gauge )
20
-
-
... More
Supply. Installation, testing and commissioning of insulation on the surface of the duct with duly laminated aluminum foil of mat finish closed cell nitrile rubber (Class 'O' ) with suitable adhesive, as per specifications and drawings. The Joints shall be sealed with 50mm wide and 3 mm thick self adhesive nitrile rubber tape Insulation. The rates shall include all materials of the insulation and labour works with adhesive, complete as required and specifications.
19MM
90
-
-
... More
25 MM.
30
-
-
... More
Supply. Installation, testing and commissioning of powder coated extruded aluminum sections grills as per specification.
1
-
-
... More
Supply. Installation, testing and commissioning of powder coated extruded aluminum section grills with dampers for supply air terminal for air-conditioning as per specification.
1
-
-
... More
Supply. Installation, testing and commissioning of powder coated extruded aluminum square diffusers with antismudge ring and removable core.
Supply air with dampers
4
-
-
... More
Return air without damper
4
-
-
... More
Supply. Installation, testing and commissioning of powder coated extruded aluminum Linear Grille.
150 MM
20
-
-
... More
Supply. Installation, testing and commissioning of exhaust air/fresh air louvers of powder coated extruded aluminum construction with bird screen, minimum 80 mm deep.
1
-
-
... More
Providing and Placing in position of Three Seater Sofa as per Reference image /photograph or equivqlent as approved. The contemporary customised design & drawings sofa of Size : (L)180.0cm X (D)75.0cm X (H)85.0cm, seat height 46.0cm, seat depth 51.0cm and back height 55.0cm, should be upholstered in premium leatherette, this sofa is sleek and comfortable. The wooden frame is finished in a rich brown polish with split panel seating. The back and seat have medium to firm cushioning for better posture. The Sofa stands on moulded pvc legs beautiful accents that are slightly curved on the front face of the sofa. EACH curve defines a seating space which provides for people to be seated comfortably. Finished in a luxurious Leatherette, the sofa exudes a certain class. Seat of Sofa is layered with silicon fibre filling over high density foam. The seat cushion is made of multi layered foam of density 32(+/-2kg /m3). The seating cushions have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength. All complete as per direction and satisfaction of Engineer-in-charge.
2
-
-
... More
Providing and Placing in position of Two Seater Sofa as per Reference image /photograph or equivqlent as approved. The contemporary customised design & drawings sofa of Size : (L)12.0cm X (D)75.0cm X (H)85.0cm, seat height 46.0cm, seat depth 51.0cm and back height 55.0cm, should be upholstered in premium leatherette, this sofa is sleek and comfortable. The wooden frame is finished in a rich brown polish with split panel seating. The back and seat have medium to firm cushioning for better posture. The Sofa stands on moulded pvc legs beautiful accents that are slightly curved on the front face of the sofa. EACH curve defines a seating space which provides for people to be seated comfortably. Finished in a luxurious Leatherette, the sofa exudes a certain class. Seat of Sofa is layered with silicon fibre filling over high density foam. The seat cushion is made of multi layered foam of density 32(+/-2kg /m3). The seating cushions have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength. All complete as per direction and satisfaction of Engineer-in-charge.
2
-
-
... More
Providing and Placing of SideTable as per photograph Size -1050(Dia)x425(ht)The table top shall be made out of glass and the frame and legs are made up of veneer polish of approved shade, design and colour.
7
-
-
... More
Providing and placing in positon of Table as per photograph.Over all Table Size is 1950(L)x750(d)X750(ht), Side unit size is 900(L)x450(D)x750(Ht). Table top shall be made up of 25 mm thick prelaminated mdf board at 750 mm ht.Gable end 25 mm thick in prelaminated mdf board.Table modesty 18 mm thick in prelaminated mdf board 600 mm ht. All exposed edges are sealed with 2mm thick pvc edge banding tape pressed at 200 degree C with hot melt glue on special machines.Table Top rest on the Fixed pedestal one side and rest on gable end on the other side. The Metal Flipper is fixed on worktop of size 400 x 120mm on each table without switch & socket with metal cable tray below Table top for Electrical points with metal wire riser for carrying wires. Side unit top shall be made of 25 mm thick prelaminated mdf board at 750 mm ht and understructure shall be made of 18 mm thick prelaminated mdf board. All exposed edges are sealed with 2mm thick pvc edge banding tape pressed at 200 degree C with hot melt glue on special machines.Fixed Pedestal top shall be made of 18 mm thick prelaminated mdf board at 750 mm ht and understructure shall be made of 18 mm thick prelaminated mdf board. All exposed edges are sealed with 2mm thick pvc edge banding tape pressed at 200 degree C with hot melt glue on special machines.
Back unit as per photograph.Back unit Size is 1950(L)x450(d)X750(ht), Side unit top shall be made up of 25 mm thick prelaminated mdf board. Understructure shall be made of 18 mm thick prelaminated mdf board, all exposed edges are sealed with 2mm thick pvc edge banding tape pressed at 200 degree C with hot melt glue on special machines.Back storge having openable shutters with locking arrangement. Storage having 18 mm thick prelaminated mdf board shelf.
1
-
-
... More
Providing and Supplying in positon of Mid Back Chair as per photograph.The Seat and back of the chair is upholstered with Fabric & Net and cut foam on 12mm thick BWP Plywood. The chair shall have deep cushioned back and seat comfort to body contours for proper alignment, posture and all day comfort. The PU adjustable arms. The chair is featured with Center Tilt mechanism with locking system and nylon Base. The prong (base) is made of nylon and fitted with 5 nos. twin wheel nylon castors (castor wheel dia 50mm). The prong (base) is 620mm pitch center dia (660mm with castors). The telescopic bellow is 3 piece telescopic type and injection molded in black polyurethane.
8
-
-
... More
Supplying and placing Linear workstations with partition & Mobile Pedestal as per photograph.Workstation size -1200(L)x750(D)x750/ 1200(ht). Partition -60mm thick panel based partition system of 1200mm ht. vertical & horizontal sections duly finished with powder coating in desired shade/colour. Powder coating shall be 50-60microns, shall follow seven tank procedure for anti rust treatment. Both the faces of vertical partition to be finished with laminate/Soft board/white marker/fabric panels as per the requirement. The panel above the work surface shall have fabric / White marker tile, Below table top it shall have lam Panel. Lam Panel shall be 9mm thick made up of prelaminated particle board, Soft Board Panel shall be of 9mm thickness. Top & Side trims of partition shall be 1.5mm thk in aluminium extrusion duly finished with powder coating in desired shade/colour. Top & Side Trims shall have Curve / Flat profile. All Caps shall be in Plastic.The partition should have the raceways at two levels for carrying voice/data wires and power cables separately. One raceway at skirting level and other above/below worktop as per the requirement.Skirting Raceway shall be min.100mm high and made up of 1.5mm thk aluminium duly powder coated. WorkTop & Gable end is made up of 25mm thick Prelaminated mdf board with 2mm thick pvc edge banding tape on all exposed surface.Mobile Pedestal are made of 18mm thick thick Prelaminated mdf board with 2 +1 filling Drawer. Drawer size is 400(L)x450(D)x700(ht) The Drawer units on the Castors. The drawer units are provided with center locking arrangement, all exposed edges sealed with 2mm thick pvc edge banding tape on all exposed surface.PlainGlass Screen between the two seats.
4
-
-
... More
Providing & Placing in position of High back leatherite/fabric chair ( C3 ) as per Reference image /photograph or equivqlent as approved . The cushioned seat and back shall be made of 1.2+/-0.1cm hot pressed plywood is upholstered with leather and moulded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm + 2cm W x 48.0 D cm + 2 cm . The back is cushioned made of PU foam with insitu moulded M.S. ERW round tube of size 1.9 cm ± 0.03cm x 0.16 ± 0.02 cm, upholstered with leather. The back size is 48 W cm + 2 cm x 77 D cm + 2 cm . The armrest top is molded from polyurethane and mounted on to a drop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5position tilt limiter giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. It can be adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection moulded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal. All complete as per direction and satisfaction of Engineer-in-charge.
1
-
-
... More
Providing and Placing in position of Three Seater Sofa as per Reference image /photograph or equivqlent as approved. The contemporary customised design & drawings sofa of Size : (L)180.0cm X (D)75.0cm X (H)85.0cm, seat height 46.0cm, seat depth 51.0cm and back height 55.0cm, should be upholstered in premium leatherette, this sofa is sleek and comfortable. The wooden frame is finished in a rich brown polish with split panel seating. The back and seat have medium to firm cushioning for better posture. The Sofa stands on moulded pvc legs beautiful accents that are slightly curved on the front face of the sofa. EACH curve defines a seating space which provides for people to be seated comfortably. Finished in a luxurious Leatherette, the sofa exudes a certain class. Seat of Sofa is layered with silicon fibre filling over high density foam. The seat cushion is made of multi layered foam of density 32(+/-2kg /m3). The seating cushions have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength. All complete as per direction and satisfaction of Engineer-in-charge.
1
-
-
... More
Providing and fixing in position of Center Table (L)1200X(D)600 X (H)450customised design ref. images and shop drawing as approved Center Table ( T10) with first class solid teak wood frame with 12mm thick beveled edge toughened glass top to be provided. PU Polishing – General Holes and indentations on surface shall be filled with putty made of whiting and linseed oil. The pad shall be moistened with polish and rubbed hard on the surface applying the polish sparingly but uniformly and completely over the entire surface. Another coat shall be applied in the same way after the first coat has dried sufficiently. Finishing coats shall be sprayed on the surface in 2 coats or as required till the satisfied result, using PU/melamine polish of approved make. All complete as per direction and satisfaction of Engineer-in-charge.
2
-
-
... More
Providing and Supplying in positon of Mid Back Chair as per photograph.The Seat and back of the chair is upholstered with Fabric & Net and cut foam on 12mm thick BWP Plywood. The chair shall have deep cushioned back and seat comfort to body contours for proper alignment, posture and all day comfort. The PU adjustable arms. The chair is featured with Center Tilt mechanism with locking system and nylon Base. The prong (base) is made of nylon and fitted with 5 nos. twin wheel nylon castors (castor wheel dia 50mm). The prong (base) is 620mm pitch center dia (660mm with castors). The telescopic bellow is 3 piece telescopic type and injection molded in black polyurethane.
16
-
-
... More
Providing & Placing in position of High back leatherite chair as per Reference image /photograph or equivqlent as approved . The cushioned seat and back shall be made of 1.2+/-0.1cm hot pressed plywood is upholstered with leather and moulded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm + 2cm W x 48.0 D cm + 2 cm . The back is cushioned made of PU foam with insitu moulded M.S. ERW round tube of size 1.9 cm ± 0.03cm x 0.16 ± 0.02 cm, upholstered with leather. The back size is 48 W cm + 2 cm x 77 D cm + 2 cm . The armrest top is molded from polyurethane and mounted on to a drop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5position tilt limiter giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. It can be adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection moulded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal. All complete as per direction and satisfaction of Engineer-in-charge.
8
-
-
... More
Providing & Placing in position of Fixed Leatherite / Fabric upholstered chair as per Reference image /photograph or equivqlent as approved. Chair . Chair seat shall be made up of 1.2+/-0.1cm hot pressed plywood Leatherite / Fabric upholstered chair and moulded with PU foam superior load capacity of over 135 kgs, Seat Size is 49.0 W cm x 48.0 D cm. Chair having a back in one piece curved design shall be made up of 12mm thick hot pressed ply wood upholstered in mesh fabric, back size is 49.0 W cm x 48.0 W cm. The chair seat also rotates fully 360 for a complete swivel and back shall be designed with contoured lumbar support. One piece arm rest shall be provided made up of chrome finish with leather patch. The one piece arm rest should be made up of black integral skin polypropylene with 50-70 Shore “A” hardness reinforced with MS insert, the armrest is scratch and whether resistant. The arm rests are fitted to the seat with a connecting strip assembly made of 5mm of HR steel. The under structure shall be made out of tubular frame of cantilever type in black powder coated finish. All complete as per direction and satisfaction of Engineer-in-charge.
8
-
-
... More
Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam having density 48kg/m³ and the back shall be made of moulded plywood padded with high resilience polyurethane foam having density 32kg/m³. The seat and back shall be upholstered with leatherite tapestry 0.7mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine which helps to provide full back support as well as head support. The chair shall be supplied with aluminium with cushion arm having leatherite top completely joint with seat & Back. For seating durability the chair shall have torsion bar 360 degree revolving mechanism with tilt tension adjustment which provides back strength for the chair. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The Pedestal should have five legged made of die cast aluminium having pitch circle dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon having self-lubricating property for friction free movement, confirming to ANSI/BIFMA standards. The seat size shall be 520±10 mm(D) X 500±10 mm(W) and back size shall be 600±10 mm(W) x 730±10 mm(H) from seat. Overall height shall be = 1050±10 mm. The manufacturer shall have basic quality and safety certifications like ISO-9001:2015, ISO-14001: 2015, ISO-18001:2007, BIFMA Certificate.
2
-
-
... More
Providing and supplying a Mid back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam having density 48kg/m³ and the back shall be made of moulded plywood padded with high resilience polyurethane foam having density 32kg/m³. The seat and back shall be upholstered with leatherite tapestry 0.7mm thick and 535GSM. The backrest shall be made by keeping the natural curvature of the spine which helps to provide full back support as well as head support. The chair shall be supplied with aluminium with cushion arm having leatherite top completely joint with seat & Back. For seating durability the chair shall have torsion bar 360 degree revolving mechanism with tilt tension adjustment which provides back strength for the chair. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The Pedestal should have five legged made of die cast aluminium having pitch circle dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon having self-lubricating property for friction free movement, confirming to ANSI/BIFMA standards. The seat size shall be 500±10 mm(D) x 500±10 mm(W) and back size shall be 550±10 mm(W) x 730±10 mm(H) from seat. Overall height shall be = 1000±10 mm. The manufacturer shall have basic quality and safety certifications like ISO-9001:2015, ISO-14001: 2015, ISO-18001:2007, BIFMA Certificate.
2
-
-
... More
Providing and placing in positon of Table as per photograph.Over all Table Size is 2100(L)x900(d)X750(ht). Table top 25 mm thick prelaminated mdf board at 750 mm ht. Table modesty 18 mm thick in prelaminated mdf board 600 mm ht. All exposed edges are sealed with 2mm thick pvc edge banding tape pressed at 200 degree C with hot melt glue on special machines.Table Top rest on the Fixed pedestal (2+1 filling drawer) on both side. Fixed Pedestal top shall be made of 18 mm thick prelaminated mdf board and understructure shall be made of 18 mm thick prelaminated mdf board. All exposed edges are sealed with 2mm thick pvc edge banding tape pressed at 200 degree C with hot melt glue on special machines.
3
-
-
... More
Supplying and placing sofa as per photograph. The Sofa shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 48Kg/m³ in seat and having density 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be fully upholstered with Fabric tapestry. The understructure shall have wooden. There shall be shoe provided at the bottom to avoid scratches on the floor.
5
-
-
... More
Providing & Placing Center TABLE 1200X600X 450 MM :- Top & Leg is shall be made of hard wood with melemine polished.
2
-
-
... More
Providing and placing in positon of Table with Mobile pedestal as per photograph.Table Size is 1650(L)x750(d)X750(ht), Table top 25 mm thick prelaminated mdf board at 750 mm ht.Gable end 25 mm thick in prelaminated mdf board.Table modesty 18 mm thick in prelaminated mdf board 600 mm ht. All exposed edges are sealed with 2mm thick pvc edge banding tape pressed at 200 degree C with hot melt glue on special machines. The Metal Flipper is fixed on worktop of size 400 x 120mm =1 nos on each table without switch & socket with metal cable tray below Table top for Electrical points with metal wire riser for carrying wires. Mobile Pedestal size is 400(L)x450(D)x700(Ht).Mobile Pedestal top shall be made of 18 mm thick prelaminated mdf board at 750 mm ht and understructure shall be made of 18 mm thick prelaminated mdf board. All exposed edges are sealed with 2mm thick pvc edge banding tape pressed at 200 degree C with hot melt glue on special machines.
1
-
-
... More
Providing, driving with hydraulic piling rigs with power units and installing driven cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of shoe and the length of pile to be embedded in the pile cap etc. all complete. (Length of pile for payment shall be measured from top of shoe to the bottom of pilecap) :
400 mm dia piles
24
-
-
... More
Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
53.54
-
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the
following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
All works upto plinth level Concrete of M30 grade with minimum cement content of 350 kg /cum
7.05
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement
mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.
Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm
62.2
-
-
... More
Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand):
Raised and cut pointing
28.21
-
-
... More
Removing white or colour wash by scrapping and sand papering and
preparing the surface smooth including necessary repairs to scratches
etc. complete
801.77
-
-
... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
519.14
-
-
... More
Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shade:
13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm
over and including priming coat of exterior primer applied
@ 2.20 kg/10 sqm)
309.57
-
-
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
On steel work
135.03
-
-
... More
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 20mm nominal size)
23.4
-
-
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:
(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.
b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick).The aluminium composite panel cladding sheet shall be coil coated,with Kynar 500 based PVDF/Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant,backer rods etc.
(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items.The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
9.48
-
-
... More
Supplying, fitting and fixing Logo made of WPC & MDF board with Vinear on the top and P.O. polised etc.complete as directed.
2
-
-
... More
Supplying, fitting and fixing Incumbancy board made of WPC with Vinear on the top and P.O. polised etc.complete as directed.
1
-
-
... More
Providing, fitting and fixing wall paper of reputed make over finished wall after cleaning the surface etc complete as directed.
26.94
-
-
... More
Supplying installation testing and commissioning of Gate Light with 12W Led Lamp & required 1.5 sq mm copper multstrand wire connection an as specified and directed and specified.
21
-
-
... More
Supplying with fitting and fixing of LG SmartTelevation Tv 65 Inch LED Backlit LCD(Model No.65UR640S) complete including necessary connection as approved ,specified and directed by the department.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%