Public Health Engineering Department Tender
... More
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Public Health Engineering Department - PHED Tender
Civil And Construction
Pipe Line Project
Eprocure
Opening Date14 May 2025
Closing Date28 May 2025
Tender Amount₹ 2,53,75,000
Technical
Technical
Financial
Class Of Bidder
... View More
The eligible class required by a bidder to participate in the tender is "Class – I & above registered Contractor" or simply "eligible class of contractor" under a specific department.
Technical Capacity
... View More
The bidder should have minimum experience of working 5 years under the EE(PHE),Guwahati Division No.-II, Guwahati-21 duly certified by the EE(PHE),Guwahati Division No.-II. The bidder is required to have completed similar construction projects in the last seven years. No specific percentage of similar works completed is mentioned. The average annual turnover for the last three financial years should be at least 30% of the tender inviting value. In case of a tie in L1 price, the highest annual turnover for the last 3 years will be considered.
Costs
EMD
₹ 5,07,500Document Cost
₹ 5,100Tender Fee
Refer Documents
Summary
Relaying Of Gi/ms Pipe Converting Existing Pvc Distribution Network Under Gr-iv Pwss
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PHED_44282_1Bid Award Id
ViewTender No
ACE/PHE/LAZ/TC-485/2025-26Tender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://assamtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
N.S Supplying, Fitting , fixing and laying on trenches of 200mm M.S.pipe including fabrication making the edge of Pipe to uniform V-shaped by oxyacetylene gas and finished by grinding machine before electric arc welding for jointing of pipes with supplying all the necessary specials required for laying the pipe line and testing after completion the work .
240
-
-
... More
N.S Supplying, Fitting , fixing and laying on trenches
of 150mm G.l.pipe including fabrication making
the edge of Pipe to uniform V-shaped by oxyacetylene gas and finished by grinding machine before electric arc welding for jointing of pipes with supplying all the necessary specials required for laying the pipe line and testing after completion the work .
338
-
-
... More
N.S Supplying, Fitting , fixing and laying on trenches
of 125mm G.l.pipe including fabrication making
the edge of Pipe to uniform V-shaped by oxyacetylene gas and finished by grinding
machine before electric arc welding for jointing
of pipes with supplying all the necessary specials
required for laying the pipe line and testing after
completion the work .
624
-
-
... More
N.S Supplying, Fitting , fixing and laying on trenches
of 100mm G.l.pipe including fabrication making
the edge of Pipe to uniform V-shaped by
oxyacetylene gas and finished by grinding
machine before electric arc welding for jointing
of pipes with supplying all the necessary specials
required for laying the pipe line and testing after
completion the work .
667
-
-
... More
N.S Supplying, Fitting , fixing and laying on trenches of 80mm G.l.pipe including fabrication making the edge of Pipe to uniform V-shaped by oxyacetylene gas and finished by grinding machine before electric arc welding for jointing of pipes with supplying all the necessary specials required for laying the pipe line and testing after completian the work -
415
-
-
... More
N.S Supplying, Fitting , fixing and laying on trenches of 65mm G.l.pipe including fabrication making the edge of Pipe to uniform V-shaped by oxyacetylene gas and finished by grinding machine before electric arc welding for jointing of pipes with supplying all the necessary specials required for laying the pipe line and testing after completion of the work
1891
-
-
... More
N.S Supplying, Fitting , fixing and laying on trenches of 50mm G.l.pipe including fabrication making the edge of Pipe to uniform V-shaped by oxyacetylene gas and finished by grinding machine before electric arc welding for jointing of pipes with supplying all the necessary specials required for laying the pipe line and testing after completion the work
579
-
-
... More
N.S Supplying, Fitting , fixing and laying on trenches of 40mm G.l.pipe including fabrication making the edge of Pipe to uniform V-shaped by oxyacetylene gas and finished by grinding machine before electric arc welding for jointing of pipes with supplying all the necessary specials required for laying the pipe line and testing after completion the work
30
-
-
... More
N.S Dispose of earth and other material from the
working site up to 30km. distances, cleaning the
spot properly including all labour for loading and
unloading higher charge for truck , fuel and T&P materials all complete
762.24
-
-
... More
18.41 Providing and filling sand of grading zone V or coarser grade, allround the G.l. pipes in external work
18.41.10:-150mm dia G.l.pipe=338.00 Mtr
338
-
-
... More
18.41 Providing and filling sand of grading zone V or coarser grade, allround the G.l. pipes in external work
18.41.9 100mm dia G.l.pipe=667.00 Mtr.
667
-
-
... More
18.41Providing and filling sand of grading zone V or coarser grade, allround the G.l. pipes in external work
18.41.8:- 80mm dia G.l.pipe=415.00 Mtr.
415
-
-
... More
18.41 Providing and filling sand of grading zone V or coarser grade, allround the G.l. pipes in external work
18.41.7:- 65mm dia G.l.,pipe=1895.00 Mtr
1891
-
-
... More
18.41 Providing and filling sand of grading zone V or coarser grade, allround the G.l. pipes in external work
18.41.6:- 50mm dia G.l.pipe=579.00 Mtr.
579
-
-
... More
18.41 Providing and filling sand of grading zone V or coarser grade, allround the G.l. pipes in external work
18.41.5:-40mm dia G.l.pipe=60.00 Mtr.
30
-
-
... More
N.S Providing and filling sand of grading zone V or coarser grade, allround the G.l. pipes in external work
200mm dia M.S.pipe=240.00 Mtr
240
-
-
... More
N.S Providing and filling sand of grading zone V or coarser grade, allround the G.l. pipes in external work
125mm dia G.l e=624.00 Mtr
624
-
-
... More
18.12 Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (Refitting of house connection with new line) 18.12.1 15 mm dia nominal bore
3072
-
-
... More
Labour charge for carrying, placing in position, fitting and fixing C.l. sluice valve (with wheel & cap) C.l. reflex valve complete with supplying bolts and nuts,3 mm thick rubber insertion sheet etc. (the tail pieces if required will be paid separately) all complete as directed (one valve and two flanged joints).
b) 100mm dia
5
-
-
... More
9.6.1 Labour charge for carrying, placing in position, fitting and fixing C.l. sluice valve (with wheel & cap) C.l. reflex valve complete with supplying bolts and nuts,3 mm thick rubber insertion sheet etc. (the tail pieces if required will be paid separately) all complete as directed (one valve and two flanged joints).
c)125mm dia
5
-
-
... More
9.6.1 Labour charge for carrying, placing in position, fitting and fixing C.l. sluice valve (with wheel & cap) C.l. reflex valve complete with supplying bolts and nuts,3 mm thick rubber insertion sheet etc. (the tail pieces if required will be paid separately) all complete as directed (one valve and two flanged joints).
d) 150mm dia
2
-
-
... More
9.6.1 Labour charge for carrying, placing in position, fitting and fixing C.l. sluice valve (with wheel & cap) C.l. reflex valve complete with supplying bolts and nuts,3 mm thick rubber insertion sheet etc. (the tail pieces if required will be paid separately) all complete as directed (one valve and two flanged joints).
e)200mm dia
1
-
-
... More
9.6.4 Labour charge for carrying providing and fixing
full way wheel valve of approved quality with
supplying jointing materials all complete as
directed.
H) 80mm dia
3
-
-
... More
9.6.4 Labour charge for carrying providing and fixing full way wheel valve of approved quality with supplying jointing materials all complete as directed.
G)65mm dia=8
8
-
-
... More
N.S Requirement of materials:- :-(As per Company's price list Sluice Valve PN-1.0 (Flanged) with Rising Stem. Hand Wheel Operated, Stainless Steel Stem, Bronze Body Seat Ring. Flanges Drilled to lS: 1538, Shell Test Pressure - 1.5 MPa (Hyd.),seat Test Pressure - 1.0 MPa (Hyd.)(Price list enclosed) HSN CODE : 84818030
100mm dia=5
5
-
-
... More
N.S Requirement of materials:- :-(As per Company's price list Sluice Valve PN-1.0 (Flanged) with Rising Stem. Hand Wheel Operated, Stainless Steel Stem, Bronze Body Seat Ring. Flanges Drilled to lS: 1538, Shell Test Pressure - 1.5 MPa (Hyd.),seat Test Pressure - 1.0 MPa (Hyd.)(Price list enclosed) HSN CODE : 84818030
125mm dia=5
5
-
-
... More
N.S Requirement of materials:- :-(As per Company's price list Sluice Valve PN-1.0 (Flanged) with Rising Stem. Hand Wheel Operated, Stainless Steel Stem, Bronze Body Seat Ring. Flanges Drilled to lS: 1538, Shell Test Pressure - 1.5 MPa (Hyd.),seat Test Pressure - 1.0 MPa (Hyd.)(Price list enclosed) HSN CODE : 84818030
150mm dia=2
2
-
-
... More
N.S Requirement of materials:- :-(As per Company's price list Sluice Valve PN-1.0 (Flanged) with Rising Stem. Hand Wheel Operated, Stainless Steel Stem, Bronze Body Seat Ring. Flanges Drilled to lS: 1538, Shell Test Pressure - 1.5 MPa (Hyd.),seat Test Pressure - 1.0 MPa (Hyd.)(Price list enclosed) HSN CODE : 84818030
200mm dia=1
1
-
-
... More
N.S Requirement of materials:- :-(As per Company's
price list
2) Art. No.1008:- "zoLoroo" Bronze Ballvalve price
list (Screwed). HSN CODE : 84818090
80mm dia=3
3
-
-
... More
N.S Requirement of materials:- :-(As per Company's
price list
2) Art. No.1008:- "zoLoroo" Bronze Ballvalve price
list (Screwed). HSN CODE : 84818090
65mm dia=8
8
-
-
... More
N.S G.l. Threaded Flange
100mm dia=10
10
-
-
... More
N.S G.l. Threaded Flange
125mm dia=10
10
-
-
... More
N.S G.l. Threaded Flange
150mm dia=4
4
-
-
... More
N.S G.l.Nipple
80mm dia=6
6
-
-
... More
N.S G.l.Nipple
65mm dia=16
16
-
-
... More
N.S G.l.Socket
65mm dia=15
16
-
-
... More
N.S M Seal=1Kg.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements