Numaligarh Refinery Limited Tender
... More
The NRL has issued a formal invitation for competitive bids for the Numaligarh Refinery Limited project, for Supply Of Fitting Block Forged _cs_ As_ss For Ag And Ug Piping For Msb, Pfcc, Gds And Ff For Nrep in Golaghat, Assam. The bid opening date for this tender is 05-04-2025 and the last date for bid submission is 06-05-2025. Interested bidders for Numaligarh Refinery Limited tender can download the important documents here to check the tender amount, scope of work, eligibility criteria and technical requirements.
Costs
EMD
0Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_NRL_855616_1Bid Award Id
ViewTender No
TK-1ZZZA-MP-RFQ-0171Tender Authority
Numaligarh Refinery Limited ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
RCPL CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
4
-
-
... More
ELB 90 DEG SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
24
-
-
... More
CROSS LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, OPPOSITE ENDS SHALL BE OF SAME SIZE
1
-
-
... More
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
HCPL CS (GALV.), 6000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
ELB 90 DEG CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1174
-
-
... More
NIPPLE CS, B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
136
-
-
... More
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
18
-
-
... More
NIPPLE CS, B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
127
-
-
... More
TEE LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
3
-
-
... More
ELB 90 DEG CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
39
-
-
... More
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
8
-
-
... More
RCPL LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
ELB 90 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
117
-
-
... More
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
15
-
-
... More
HCPL LTCS, 3000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
3
-
-
... More
NIPPLE CS (IBR), B36.10M, MNPT x PE,SCH XS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XS, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIA, REQUIRED IF MOC IS OF PIPE ELSE, FORM IIIC FOR FORGED MOC
96
-
-
... More
CROSS SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, OPPOSITE ENDS SHALL BE OF SAME SIZE
3
-
-
... More
TEE CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
4
-
-
... More
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
1
-
-
... More
ELB 45 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
71
-
-
... More
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
20
-
-
... More
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
13
-
-
... More
HCPL CS (IBR), 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
1
-
-
... More
TEE SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
15
-
-
... More
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
10
-
-
... More
CROSS SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, OPPOSITE ENDS SHALL BE OF SAME SIZE
6
-
-
... More
TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
62
-
-
... More
HCPL LTCS, 6000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
RCPL CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
11
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
4
-
-
... More
ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
148
-
-
... More
HCPL CS (GALV.)&EXT. COATED, 3000,0, B16.11, THREADED END,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
1
-
-
... More
HCPL AS (IBR), 6000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
2
-
-
... More
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
22
-
-
... More
ELB 90 DEG CS (NACE+H2), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
38
-
-
... More
HCPL AS (H2 SER.), 3000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
1
-
-
... More
TEE LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
26
-
-
... More
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
4
-
-
... More
ELB 90 DEG CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
6
-
-
... More
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
28
-
-
... More
ELB 45 DEG CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
17
-
-
... More
TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
107
-
-
... More
NIPPLE AS (IBR), B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P11, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F11 CL.2 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
58
-
-
... More
FCPL AS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
8
-
-
... More
NIPPLE CS, B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
15
-
-
... More
ELB 45 DEG LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
3
-
-
... More
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
1
-
-
... More
TEE LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
28
-
-
... More
ELB 90 DEG CS (NACE+H2), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
1
-
-
... More
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
117
-
-
... More
ELB 90 DEG CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
657
-
-
... More
FCPL SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
1
-
-
... More
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
19
-
-
... More
NIPPLE AS (H2 SER.), B36.10M, MNPT x PE,SCH XS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P11, MAT. DELIV. COND. SCH XS, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F11 CL.2 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
156
-
-
... More
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
50
-
-
... More
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
2
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
7
-
-
... More
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
16
-
-
... More
NIPPLE CS (H2 SER.), B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
140
-
-
... More
ELB 90 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1959
-
-
... More
NIPPLE CS (NACE), B36.10M, MNPT x BW END,SCH XXS, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, SERVICE NACE, CATEGORY 1, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
158
-
-
... More
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
61
-
-
... More
TEE AS (IBR), 6000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
32
-
-
... More
ELB 90 DEG SS DUAL (NACE), 3000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103
3
-
-
... More
RCPL SS DUAL (H2 SER.), 9000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
1
-
-
... More
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
204
-
-
... More
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
29
-
-
... More
NIPPLE LTCS (AMINE+CAUSTIC), B36.10M, MNPT x BW END,SCH XS, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH XS, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
3
-
-
... More
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
676
-
-
... More
TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
12
-
-
... More
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
11
-
-
... More
HCPL CS (GALV.)&EXT. COATED, 3000,0, B16.11, THREADED END,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
4
-
-
... More
TEE CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
3
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
89
-
-
... More
GROUP-6 (GROUP WISE EVALUATION)
SUPPLY OF FITTINGS BLOCK FORGED -CARBON STEEL-GALV FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
-
-
-
... More
ELB 90 DEG CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
95
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
NIPPLE LTCS, B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
143
-
-
... More
TEE LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
ELB 90 DEG LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
319
-
-
... More
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
46
-
-
... More
TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
377
-
-
... More
NIPPLE LTCS (NACE), B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, SERVICE NACE, CATEGORY 1, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
14
-
-
... More
RCPL CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
13
-
-
... More
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
3
-
-
... More
NIPPLE SS, B36.19M, MNPT x PE,SCH 80S, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP321, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F321 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
17
-
-
... More
NIPPLE CS, B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
121
-
-
... More
ELB 90 DEG LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
154
-
-
... More
CROSS CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
17
-
-
... More
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
12
-
-
... More
ELB 90 DEG LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
202
-
-
... More
ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
81
-
-
... More
ELB 90 DEG CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
23
-
-
... More
TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
14
-
-
... More
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
10
-
-
... More
ELB 90 DEG LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
11
-
-
... More
ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
106
-
-
... More
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
2
-
-
... More
ELB 45 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
189
-
-
... More
TEE CS (NACE+H2), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
6
-
-
... More
RCPL CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
4
-
-
... More
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
2
-
-
... More
ELB 90 DEG CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
30
-
-
... More
HCPL LTCS, 3000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
4
-
-
... More
ELB 45 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
6
-
-
... More
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
31
-
-
... More
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
GROUP-1 (GROUP WISE EVALUATION)
SUPPLY OF FITTINGS BLOCK FORGED_STAINLESS STEEL FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
-
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
3
-
-
... More
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
37
-
-
... More
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1147
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
ELB 45 DEG LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
36
-
-
... More
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
13
-
-
... More
NIPPLE LTCS (NACE), B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, SERVICE NACE, CATEGORY 1, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
4
-
-
... More
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
10
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
GROUP-7 (GROUP WISE EVALUATION)
SUPPLY OF FITTINGS BLOCK FORGED -CARBON STEEL-ELB,FCPL,RCPL,CROSS,TEE,HPCL,NIPPLE FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
-
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
9
-
-
... More
GROUP-4 (GROUP WISE EVALUATION)
SUPPLY OF FITTINGS BLOCK FORGED -CARBON STEEL-H2 SER and NACE FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
-
-
-
... More
ELB 45 DEG CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
72
-
-
... More
HCPL CS (GALV.)&EXT. COATED, 3000,0, B16.11, THREADED END,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
1
-
-
... More
TEE CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
RCPL CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
19
-
-
... More
CROSS SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, OPPOSITE ENDS SHALL BE OF SAME SIZE
6
-
-
... More
TEE CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
17
-
-
... More
ELB 45 DEG AS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
2
-
-
... More
ELB 45 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
17
-
-
... More
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
NIPPLE AS, B36.10M, MNPT x BW END,SCH 160, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P9, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F9 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
139
-
-
... More
HCPL CS (GALV.)&EXT. COATED, 3000,0, B16.11, THREADED END,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
8
-
-
... More
TEE CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
46
-
-
... More
ELB 90 DEG CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
14
-
-
... More
TEE LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
3
-
-
... More
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
718
-
-
... More
NIPPLE LTCS, B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
40
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
33
-
-
... More
RCPL CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
11
-
-
... More
NIPPLE SS, B36.19M, MNPT x BW END,SCH 80S, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP321H, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F321H IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
37
-
-
... More
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
ELB 45 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
9
-
-
... More
FCPL AS (IBR), 6000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
2
-
-
... More
NIPPLE ERW CS, IS 1239, MNPT x PE,SCH HVY, ERW, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE IS 1239 PART-1,HVY, MAT. DELIV. COND. SCH HVY, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
CROSS CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
37
-
-
... More
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
72
-
-
... More
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
56
-
-
... More
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
15
-
-
... More
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
12
-
-
... More
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
6
-
-
... More
ELB 90 DEG SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
15
-
-
... More
CROSS CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
6
-
-
... More
TEE AS (IBR), 6000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
6
-
-
... More
ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2089
-
-
... More
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
3
-
-
... More
RCPL LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
55
-
-
... More
TEE CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
FCPL SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
3
-
-
... More
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
22
-
-
... More
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
RCPL CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
39
-
-
... More
ELB 90 DEG AS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
159
-
-
... More
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
3
-
-
... More
TEE CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
4
-
-
... More
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
38
-
-
... More
NIPPLE AS, B36.10M, MNPT x BW END,SCH 160, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P5, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F5 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
32
-
-
... More
ELB 45 DEG CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
14
-
-
... More
HCPL SS, 3000,0, B16.11, SW END, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
1
-
-
... More
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
1
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
ELB 90 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
97
-
-
... More
HCPL CS (GALV.), 6000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
5
-
-
... More
HCPL LTCS, 6000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
RCPL CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
2
-
-
... More
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
15
-
-
... More
ELB 90 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
620
-
-
... More
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
4
-
-
... More
ELB 45 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
1432
-
-
... More
ELB 90 DEG CS (GALV)&EXT. COAT, 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
15
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
TEE SS DUAL (H2 SER.), 9000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
1
-
-
... More
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
2
-
-
... More
GROUP-3 (GROUP WISE EVALUATION)
SUPPLY OF FITTINGS BLOCK FORGED -CARBON STEEL-LTCS FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
-
-
-
... More
HCPL LTCS (NACE), 9000,0, B16.11, SW END, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
4
-
-
... More
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
20
-
-
... More
CROSS CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
3
-
-
... More
FCPL LTCS, 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A350 Gr.LF2 CL.1, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
114
-
-
... More
NIPPLE SS, B36.19M, MNPT x PE,SCH 80S, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP321, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F321 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
35
-
-
... More
ELB 90 DEG SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
8
-
-
... More
ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
6
-
-
... More
ELB 45 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
113
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
7
-
-
... More
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
1
-
-
... More
FCPL CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
6293
-
-
... More
NIPPLE AS (IBR), B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P11, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F11 CL.2 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
32
-
-
... More
TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
50
-
-
... More
FCPL CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
9
-
-
... More
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
ELB 90 DEG LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
33
-
-
... More
ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
250
-
-
... More
ELB 45 DEG CS (NACE+H2), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
6
-
-
... More
NIPPLE SS, B36.19M, MNPT x PE,SCH 80S, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP321, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F321 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
14
-
-
... More
NIPPLE AS (H2 SER.), B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P11, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F11 CL.2 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
159
-
-
... More
TEE LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
GROUP-2 (GROUP WISE EVALUATION)
SUPPLY OF FITTINGS BLOCK FORGED - ALLOY STEEL FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
-
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
6
-
-
... More
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
3
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
3
-
-
... More
HCPL CS (GALV.)&EXT. COATED, 3000,0, B16.11, THREADED END,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
7
-
-
... More
HCPL LTCS, 3000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
34
-
-
... More
ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
484
-
-
... More
RCPL SS DUAL (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
2
-
-
... More
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
15
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
15
-
-
... More
ELB 45 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
23
-
-
... More
ELB 45 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
228
-
-
... More
ELB 90 DEG SS DUAL (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
11
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
5
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
46
-
-
... More
TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
141
-
-
... More
ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
4232
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
16
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
CROSS CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
47
-
-
... More
HCPL AS (IBR), 6000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
2
-
-
... More
FCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
49
-
-
... More
ELB 90 DEG SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
1
-
-
... More
FCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
49
-
-
... More
CROSS LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
29
-
-
... More
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
2
-
-
... More
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
2
-
-
... More
ELB 90 DEG CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
8
-
-
... More
ELB 45 DEG LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
20
-
-
... More
ELB 90 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
559
-
-
... More
HCPL CS (GALV.), 6000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
3
-
-
... More
RCPL CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
12
-
-
... More
ELB 45 DEG LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
1
-
-
... More
ELB 90 DEG CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
573
-
-
... More
ELB 90 DEG SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
1
-
-
... More
FCPL LTCS (NACE), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
9
-
-
... More
NIPPLE CS (IBR), B36.10M, MNPT x PE,SCH 160, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIA, REQUIRED IF MOC IS OF PIPE ELSE, FORM IIIC FOR FORGED MOC
144
-
-
... More
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
1
-
-
... More
ELB 90 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
186
-
-
... More
ELB 90 DEG LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
3
-
-
... More
NIPPLE SS, B36.19M, MNPT x BW END,SCH 80S, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A312 Gr.TP321H, MAT. DELIV. COND. SCH 80S, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F321H IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
32
-
-
... More
ELB 90 DEG LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
39
-
-
... More
NIPPLE LTCS (AMINE+CAUSTIC), B36.10M, MNPT x BW END,SCH 160, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A333 Gr.6, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A350 Gr.LF2 CL.1 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
3
-
-
... More
ELB 90 DEG CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1078
-
-
... More
TEE CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
34
-
-
... More
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
16
-
-
... More
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
14
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
4
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
HCPL CS, 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
4
-
-
... More
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
19
-
-
... More
HCPL CS (IBR), 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
1
-
-
... More
RCPL AS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
6
-
-
... More
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
9
-
-
... More
HCPL AS (IBR), 6000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
2
-
-
... More
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
ELB 45 DEG LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
4
-
-
... More
HCPL CS (GALV.), 6000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
7
-
-
... More
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
1
-
-
... More
ELB 45 DEG CS (GALV)&EXT. COAT, 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
1
-
-
... More
TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
177
-
-
... More
ELB 90 DEG CS (GALV)&EXT. COAT, 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
1
-
-
... More
HCPL LTCS, 3000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
4
-
-
... More
TEE LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
NIPPLE AS (H2 SER.), B36.10M, MNPT x PE,SCH XXS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P11, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F11 CL.2 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
3
-
-
... More
ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
4009
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
47
-
-
... More
ELB 90 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
3
-
-
... More
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F316/316L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
1
-
-
... More
ELB 45 DEG LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
4
-
-
... More
ELB 45 DEG CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
67
-
-
... More
TEE CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
9
-
-
... More
HCPL CS (IBR), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
1
-
-
... More
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
7
-
-
... More
ELB 45 DEG SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
43
-
-
... More
ELB 90 DEG SS DUAL (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
11
-
-
... More
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
ELB 90 DEG AS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
7
-
-
... More
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
8
-
-
... More
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2634
-
-
... More
RCPL CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
25
-
-
... More
TEE LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
4
-
-
... More
HCPL LTCS, 6000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
6
-
-
... More
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
NIPPLE AS, B36.10M, MNPT x BW END,SCH 160, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P5, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F5 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
91
-
-
... More
TEE CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
HCPL SS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
6
-
-
... More
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
13
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
4
-
-
... More
NIPPLE CS (H2 SER.), B36.10M, MNPT x PE,SCH XS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XS, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
74
-
-
... More
TEE CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
15
-
-
... More
ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
733
-
-
... More
HCPL CS (H2 SER.), 3000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
HCPL CS, 6000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
6
-
-
... More
ELB 90 DEG AS (IBR), 6000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, IBR CERTIFICATE IN FORM IIIC REQUIRED.
107
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
ELB 45 DEG CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
4
-
-
... More
ELB 90 DEG SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
1
-
-
... More
TEE CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
175
-
-
... More
HCPL AS (H2 SER.), 3000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
2
-
-
... More
HCPL AS (H2 SER.), 3000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
14
-
-
... More
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1532
-
-
... More
CROSS CS (IBR), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED., OPPOSITE ENDS SHALL BE OF SAME SIZE
78
-
-
... More
NIPPLE CS (CAUSTIC), B36.10M, MNPT x BW END,SCH XXS, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
6
-
-
... More
FCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
15
-
-
... More
RCPL CS, 9000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
3
-
-
... More
TEE SS DUAL (NACE), 3000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103
1
-
-
... More
NIPPLE AS, B36.10M, MNPT x BW END,SCH 160, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P9, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F9 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
69
-
-
... More
CROSS LTCS (NACE), 9000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, OPPOSITE ENDS SHALL BE OF SAME SIZE
7
-
-
... More
NIPPLE AS, B36.10M, MNPT x BW END,SCH 160, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A335 Gr.P9, MAT. DELIV. COND. SCH 160, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A182 Gr.F9 IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
2
-
-
... More
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
1896
-
-
... More
RCPL SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
48
-
-
... More
NIPPLE ERW CS, IS 1239, MNPT x PE,SCH HVY, ERW, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE IS 1239 PART-1,HVY, MAT. DELIV. COND. SCH HVY, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
11
-
-
... More
RCPL CS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
HCPL LTCS, 6000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
HCPL SS DUAL, 3000,0, B16.11, SW END, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
9
-
-
... More
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
5
-
-
... More
TEE CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
64
-
-
... More
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
27
-
-
... More
NIPPLE CS, B36.10M, MNPT x PE,SCH XS, SEAMLESS, ONE END PLAIN, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XS, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
156
-
-
... More
TEE CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
NIPPLE CS (NACE), B36.10M, MNPT x BW END,SCH XXS, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, SERVICE NACE, CATEGORY 1, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
62
-
-
... More
ELB 90 DEG CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
266
-
-
... More
NIPPLE CS (CAUSTIC), B36.10M, MNPT x BW END,SCH XXS, SEAMLESS, ONE END BW, OTHER END THRD., LENGTH = 150 mm, NIPPLE A106 Gr.B, MAT. DELIV. COND. SCH XXS, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER EXTERNAL THREADS, AS PER ASME/ANSI B1.20.1, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0004, ALTERNATIVE FORGED AS, A105N IS ACCEPTABLE AND, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
3
-
-
... More
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
127
-
-
... More
TEE LTCS, 3000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
4
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
ELB 45 DEG CS (GALV.), 6000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
ELB 45 DEG LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
4
-
-
... More
HCPL CS, 9000,0, B16.11, SW END, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
HCPL LTCS, 9000,0, B16.11, SW END, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
3
-
-
... More
TEE AS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
116
-
-
... More
ELB 90 DEG SS DUAL (H2 SER.), 9000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
10
-
-
... More
TEE CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
86
-
-
... More
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
111
-
-
... More
TEE SS DUAL, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F304/304L, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
6
-
-
... More
TEE SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
6
-
-
... More
HCPL LTCS (NACE), 9000,0, B16.11, SW END, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
5
-
-
... More
FCPL LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
5
-
-
... More
ELB 45 DEG CS (NACE+H2), 6000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
ELB 45 DEG CS, 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
9
-
-
... More
RCPL SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
10
-
-
... More
TEE AS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
27
-
-
... More
ELB 90 DEG LTCS (NACE), 6000,0, B16.11, SW ENDS, FORGED, SERVICE NACE, CATEGORY 1, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
3
-
-
... More
TEE CS (IBR), 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, IBR CERTIFICATE IN FORM IIIC REQUIRED.
95
-
-
... More
ELB 45 DEG CS (GALV)&EXT. COAT, 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, INSIDE GALVANISED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, EXTERNALLY FBE COATING ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0015
8
-
-
... More
HCPL AS (H2 SER.), 3000,0, B16.11, SW END, FORGED, NORMALIZED & TEMPERED, A182 Gr.F11 CL.2, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
1
-
-
... More
CROSS LTCS, 9000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
11
-
-
... More
ELB 90 DEG LTCS, 6000,0, B16.11, SW ENDS, FORGED, A350 Gr.LF2 CL.1, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
20
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
4
-
-
... More
GROUP-5 (GROUP WISE EVALUATION)
SUPPLY OF FITTINGS BLOCK FORGED -CARBON STEEL-IBR FOR AG+UG PIPPING FOR NERP PROJECT Including TPI Charges as specified in Material Requisition.
-
-
-
... More
RCPL CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
25
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
4
-
-
... More
CROSS CS (H2 SER.), 6000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
3
-
-
... More
HCPL CS (GALV.), 3000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
2
-
-
... More
TEE SS, 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
35
-
-
... More
CROSS CS, 3000,0, B16.11, SW ENDS, FORGED, A105N, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042, OPPOSITE ENDS SHALL BE OF SAME SIZE
12
-
-
... More
HCPL CS (GALV.), 6000,0, B16.11, THREADED END,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
1
-
-
... More
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
14
-
-
... More
TEE CS (GALV.), 3000,0, B16.11, THREADED ENDS,FNPT, FORGED, A105N (GALV.), SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005 AND IN-042
161
-
-
... More
FCPL SS (H2 SER.), 3000,0, B16.11, SW ENDS, FORGED, A182 Gr.F321, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005
7
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements