Northeast Frontier Railway Tender

Supply, fitting, fixing , testing & commissioning of Split type Air conditioner 1.5 Ton, 5 18 star rated , with copper tube of condenser coil and copper connecting pipe, environment friendly R410A refrigerant having ISEER Value: not less than 4.73, provided with HD filter including required connecting pipe &bracket for fixing of outdoor unit on wall.

Supply , fitting, fixing of LED streetlight 30 W made up of pressure die cast alluminium alloy housing(heat sink) with empered protective toughned glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07, Operating voltage range: 140-270V 15 ,Lumen efficacy of LED 100 lm/W with PC lens to ensure better uniformity of light distribution powered by integral, isolated electronic LED driver should be as per IEC: 62384/IS:16104 (SMPS based constant current supply) with THD<20%, Output Open / Short Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection & other safety tests as per IS 15885 Part-2/ Sec 13. Power factor=0.95 , color temperature=5700 K ,LED Should be as per LM- 80/IS:16105.The street light fittings should be warranted for 5 years.

Supply, fitting,fixing , testing and commissioning of LED 18 W panel light slim fit Color temp 6500K(Cool day) size: 195mmx195mm, ultra modern recess mounted luminarie with high brightness SMD LEDs, suitable for Armstrong/Grid ceiling as per site requirement

Dismentling of existing OH line, Pole and handing over materials to concerned supervisor.

Supply ,installation of Online UPS Capacity : 1 KVA , Input DC Voltage: 36V,Output:230V,50Hz,1 Phase with 3 Nos of SMF Battery 12V,42 Ah. The Online UPS should have the following technical specifications: High frequency and double conversion online technology,High 22 end Micro Controller Based ,Wide Input voltage range, Advanced PFC Technology ,Advanced Battery Management ,Automatic Battery Charging in UPS off mode, Short Circuit and overload protection, EMI / RFI noise filter, Smart RS232 Communication with monitoring software,LCD/LED Display simultaneously ,Over Temperature Protection, Different output Voltage settings. Output Frequency fixed at 50Hz or can be synchronized with Input Frequency, Static Bypass Enable or Disable,Outlets Programmable and non programmable and Protection from DC Fan failure.

Supply, fitting, fixing, testing and commissioning of 8 way Double Door SPN MCB DB with IP-43 protection, Door earthing,Neutral Bar,earth bar and bus bar provided with the following MCBS:- (i) MCB 16 A DP 'C' Series, 10KABC= 4 Nos

Supply, installation, testing and commissioning of wall mounted VTPN Distribution 13 Board , IP 43 Protection with MCCB as incomer with the following switchgears: (i) MCCB, 4 pole, 100 Amps, 25 KA BC, lcs=100% lcu= 1 No (ii) MCB, DP, 63 Amps, 'C' series, 10KA BC=2 Nos(iii)MCB, DP, 32 Amps, 'C' series, 10KA BC=4 Nos

upply , fitting, fixing of LED streetlight 30 W made up of pressure die cast alluminium alloy housing(heat sink) with empered protective toughned glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07, Operating voltage range: 140-270V 06 ,Lumen efficacy of LED 100 lm/W with PC lens to ensure better uniformity of light distribution powered by integral, isolated electronic LED driver should be as per IEC: 62384/IS:16104 (SMPS based constant current supply) with THD<20%, Output Open / Short Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection & other safety tests as per IS 15885 Part-2/ Sec 13. Power factor=0.95 , color temperature=5700 K ,LED Should be as per LM- 80/IS:16105 . The street light fittings should be warranted for 5 years.

Supply, fitting, fixing, testing & commissioning of wiring materials for concealed type 09 wiring for AC point from main/sub-main board to the points by 6 mm sq single core multi-strand FRLS copper cable through heavy duty PVC conduit pipe including MCB Protected Power Unit 25 A ,modular type having Socket, push Starter and 1.0 mm.sq. unsheathed copper cable in green colour for earth continuity wire.

Supply, installation testing and commissioning of Energy Efficient Ceiling Fan 1400 20 mm sweep BLDC motor, BEE 5 star rated ceiling fan With regulator enable motor with power of 28 watt with 10% tolerance , motor insulation B type 220-240V 50Hz single phase with Speed minimum 350 rpm minimum air delivery 225CMM complete set of 3 no's. blade , down rods, 2 nos canopies , shackle kit & all remaining accessories including nut bolts Washers complete as required .

Supply & erection of earth by 80 mm dia 3 mtr. long (Medium Gauge) GI pipe ,8 SWG 03 GI wire, GI nuts, bolts including masonry materials for earthing pit, salt, charcoal etc. and construction of earth pit covered with cement concrete plate having locking arrangement and watering pipe .

Supply, fitting, fixing, testing & commissioning of wiring materials for concealed type 05 wiring of light point from main/sub-main board to the points by 1.5 mm.sq.single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch 6 A, ceiling rose, GI box with suitable modules for fixing switches.

Supply, installation,testing and comissioning of Pure Sine Wave Inverter 2KVA with 2 Nos of 12V, 150Ah tall tubular lead acid battery,including Trolley.

Supply, Laying,connection, testing and commissioning of LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured stranded aluminum conductor/Solid Aluminium Conductor cable having Galvanized steel Strip, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988 of of size mentioned below. Laying of cable to be done by Excavation of earth 01 depth 0.75 Mtrs. into breadth 0.5 Mtrs. below the ground level and a layer of sand of 0.075 Mtrs. thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of sand of 0.075 Mtrs. thickness in . The bottom of cable trench shall be leveled and got rid of any sharp material. Above the Layer of Course Sand 3 inch Size Brick is to be provided for protection of cable. Cable route markers to be provided at an interval not less than 50 Mtrs. All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024.Necessary aluminium lugs to be provided as per requirement during cable connection.

Supply, drawing and connection of single core 2.5 sq. mm PVC insulated & unsheathed multistrand FRLHS copper cable conforming to IS: 694 for voltage grade upto 1100 Volts , as per direction of supervisor incharge at site.

Supply, fitting, fixing, testing & commisioning of wiring materials for concealed type 07 wiring 6 A plug point from main/sub-main board to the points by 1.5 mm. sq. single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch & socket 6 A ,GI metal box with Suitable modules for fixing switch/socket with 1.0 mm2 unsheathed FRLS copper cable in green colour for earth continuity wire.

Supply, fitting, fixing of 200 Amps outdoor type cable junction box, angle frame 04 mounted, dust & vermin proof, complete with rain cap, aluminium basbar of suitable size for TPN, 200 Amps, 415 V made out of 16 SWG CRCA sheet duly painted, Cable Junction Box Size: (lxbxh=450x 450x600 mm). The base of the fedder pillar junction box to be provided with CC foundation of propotion 1:1.5:3( cement, sang,Chips) after connection of Ug cables.

Supply & erection of earth by 80 mm dia 3 Mtrs. long (4.5 mm thickness) GI pipe ,6 07 SWG GI wire, GI nuts, bolts including masonry materials for earthing pit, salt, charcoal etc. and construction of earth pit covered with cement concrete plate having locking arrangement and watering pipe.

Supply , fitting , fixing of GI pipe 40 mm dia ( thickness 2.9 mm) light gauge.

a) Supply and erection of Single Arm type Hot Dip Galvanized in single deep to average 65 micron DFT 6 mtr. long octagonal pole with sectional dia 130x70 mm, overall sectional thickness 3 mm complete with base plate size 220x220x12 mm, 4 Nos. 600 mm long foundation bolt of 20 mm dia with all other accessories as per direction of Engineer in charge at site. b) Supply and 02 erection of PCC/RCC/shallow foundation of size and depth as per recommendation and drawing of the manufacturer (approx. 1.6 mtr.x 0.6 mtr.x0.6 mtr.) with excavation of earth for foundation of all depth and all places, nature and condition of soil including de-watering, shoring, shuttering, batching, mixing, placing, leveling, carrying etc and re-filling the pit after completion of foundation work from excavated earth or borrowed pit by contractor's own arrangement for octagonal poles. Drawing of foundation details, loading, sectional plan bar bonding schedule etc. should be submitted before execution to get the approval from Rly. competent authority.

Supply, fitting, fixing, connection, testing and commissioning of exhaust fan 300 mm sweep(Metallic type), 230V, 50Hz

Supply, fitting, fixing of 200 Amps outdoor type cable junction box, angle frame 04 mounted, dust & vermin proof, complete with rain cap, aluminium basbar of suitable size for TPN, 200 Amps, 415 V made out of 16 SWG CRCA sheet duly painted, Cable Junction Box Size: (lxbxh=450x 450x600 mm). The base of the fedder pillar junction box to be provided with CC foundation of propotion 1:1.5:3( cement, sang,Chips) after connection of Ug cables.

a) Supply and erection of Single Arm type Hot Dip Galvanized in single deep to average 65 micron DFT 6 mtr. long octagonal pole similar to NEZONE cat. No. NZOP6 with sectional dia 130x70 mm, overall sectional thickness 3 mm complete with base plate size 220x220x12 mm, 4 Nos. 700 mm long foundation bolt of 20 mm dia with all other accessories as per direction of Engineer in charge at site. b) Supply and erection of PCC/RCC/shallow foundation of size and depth 03 as per recommendation and drawing of the manufacturer (approx. 1.6 mtr.x 0.6 mtr.x0.6 mtr.) with excavation of earth for foundation of all depth and all places, nature and condition of soil including de-watering, shoring, shuttering, batching, mixing, placing, leveling, carrying etc and re-filling the pit after completion of foundation work from excavated earth or borrowed pit by contractor's own arrangement for octagonal poles. Drawing of foundation details, loading, sectional plan bar bonding schedule etc. should be submitted before execution to get the approval from Rly. competent authority

Supply, Laying,connection, testing and commissioning of LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured stranded aluminum conductor/Solid Aluminium Conductor cable having Galvanized steel Strip, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988 of of size mentioned below. Laying of cable to be done by Excavation of earth depth 0.75 Mtrs. into breadth 0.5 Mtrs. below the ground level and a layer of sand of 0.075 Mtrs. 01 thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of sand of 0.075 Mtrs. thickness in . The bottom of cable trench shall be leveled and got rid of any sharp material. Above the Layer of Course Sand 3 inch Size Brick is to be provided for protection of cable. Cable route markers to be provided at an interval not less than 50 Mtrs. All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024.Necessary aluminium lugs to be provided as per requirement during cable connection.

Supply,installation, testing and commissioning of cubical type LT panel board ( floor mounted) of suitable size fabricated in compartmentalize design from CRCA steel sheet of 2 mm thick for frame work and covers, 3 mm thick for gland plated powder coating approved shade, having 400 Amps. capacity extensible type TPN Copper bus bars of high conductivity type. DMC/SMC bus- bar supports with short circuit withstand capacity of 31 MVA for 1 sec. bottom base channel of MS not less than 100 mm X 50 mmX 5 mm thick fabrication shall be done in transportable sections entire 12 panel shall have a common Copper earth bar of size 25 mm x 5 mm at the rear with 2 nos earth stand solid connections from main bus bar to switch gear with required size of Copper bus bar and control wiring with 2.5 mm sq. PVC insulated copper conductor single core cable , cable alleys, cable gland plates in two half, providing following switch gears:- (i)250 Amps MCCB, 4 Pole, 25KA BC, Ics=100% Icu,=1 Nos (ii)125 Amps MCCB, 4 Pole, 25KA BC, Ics=100% Icu,=3 Nos (iii)MCB 63 Amps TPN "C" series=2 No (iv)Three Phase LED Ammeter CL 1 with selectror switch inbuilt for main feeder= 1Nos (v)Three Phase LED Voltmeter CL 1 with selectror switch inbuilt for main Volt measurement range= 50-550 VAC= 1Nos (vi)LED RYB indicator pilot lamp for indication of incoming = 3 Nos

Supply, drawing and connection of single core 4 sq. mm PVC insulated & unsheathed multistrand FRLHS copper cable conforming to IS: 694 for voltage grade upto 1100 Volts , as per direction of supervisor incharge at site.