Indigenous And Tribal Faith And Culture Department Tender

Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement: 6 coarse sand

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. brick flat soling

12 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand)

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete, 40 mm thick with 20 mm nominal size stone aggregate

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Half brick masonry with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in foundations and plinth in: cement mortar 1:4 (1 cement: 4 coarse sand)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Providing and fixing aluminium work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with requiredEPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth,rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge Pre-laminated particle board with decorative lamination on both sides

Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured)

Providing and fixing specified wood frame work consisting of battens 100x50mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated hollock wood

Providing and fixing skirting with pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete: 18 mm thick

Providing and fixing white vitreous China pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous China wash basin including making all connections but excluding the cost of fittings: Flat back wash basin of size 630x450 mm

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: Rectangular shape 453x357 mm

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.

Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish withrecommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture'sspecification and direction of engineer in charge all complete. tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor V level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2- 75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with BIS certification marks)

Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement: 2 coarse sand) to the full depth of the hole: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene-based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.

Supply and installation of interlocking PVC wall panels of approved design complete with necessary supports, screws, industrial grade adhesive etc as directed by the officer in charge.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied@ 2.20 kg/10 sqm)

Furniture

SHOWCASE 2(NARASINHA WOODEN PEDESTAL): Supplying, making and fixing in position SHOWCASE 2 (800 height, 1500 wide and 1500 depth), as per design, made of 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of desired quality finished with desired finish complete in all respects with all accessories, to the full satisfaction of the Curator. (Inside and outside finish to be measured and paid separately).

SHOWCASE 6( WALL MOUNTED SHOWCASE): Supplying, making and fixing in position SHOWCASE 6 (2175 height, 1700 wide and 600 depth), as per design, with bottom part of ( 700X1700X600) and top part of (200x1700x600) made of 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of desired quality and middle portion of 5mm thick heavy sheet float glass panes of (1200x1700X600) with facility for opening one side, finished with desired finish complete in all respects with all accessories, to the full satisfaction of the Curator.

WALL MOUNTED SHOWCASE/CORNER SHOWCASE: (SHOWCASE 7& 13): Supplying, making and fixing in position SHOWCASE 7&13 (2100 height, 780 wide and 780 depth), as per design, with bottom part as Pedestal of( 775X775X775 ) and top part of (200x775x775) made of 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of desired quality and middle portion of 5mm thick heavy sheet float glass panes of (1200x775x775) with facility for opening one side, finished with desired finish complete in all respects with all accessories, to the full satisfaction of the Curator.

SHOWCASE 8 ( POTTERY + TERRACOTA) : Supplying, making and fixing in position SHOWCASE 8 (2175 height, 3800 wide and 600 depth), as per design, with bottom part of ( 700X3800X600) and top part of (200x3800x600) made of19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of desired quality and middle portion of 5mm thick heavy sheet float glass panes of (1200x3800X600) with facility for opening the glass, finished with desired finish complete in all respects with all accessories, to the full satisfaction of the Curator.

SHOWCASE 10: Supplying, making and fixing in position SHOWCASE 10 (2200 height, 2700 wide and 600 depth), as per design, with bottom part of ( 800 X2700 X 600) and top part of (200 x 2700 x600) made of 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of desired quality and middle portion of 5mm thick heavy sheet float glass panes of (1200 x2700 X600) with facility for opening the glass, finished with desired finish complete in all respects with all accessories, to the full satisfaction of the Curator.

SHOWCASE 11(ARM & ARMOUR): Supplying, making and fixing in position SHOWCASE 11 (2200 height, 3500 wide and 450 depth), as per design, with bottom part of ( 800 X3500 X 450) and top part of (200 x 3500 x450) made of 19 mm BWP Block Board of desired quality and middle portion of 5mm thick heavy sheet float glass panes of (1200 x3500 X600) with facility for opening the glass, finished with desired finish complete in all respects with all accessories, to the full satisfaction of the Curator.

SHOWCASE 15 &18 (TABE TOP SHOWCASE): Supplying, making and fixing in position SHOWCASE 11 (2200 height, 2700 wide and 600 depth), as per design, with bottom part of ( 800 X2700 X 600) and top part of (200 x 2700 x600) made of 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of desired quality and middle portion of 5mm thick heavy sheet float glass panes of (1200 x2700 X600) with facility for opening the glass, finished with desired finish complete in all respects with all accessories, to the full satisfaction of the Curator.

SHOWCASE 16 ( Supplying, making and fixing in position SHOWCASE 16 (1500 height, 600 wide and 350 depth), as per design, with bottom part of(150X600X350 ) and top part of (150X600X350) made of19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of desired quality and middle portion of 5mm thick heavy sheet float glass panes of (1200X600X350) with facility for opening one side, finished with desired finish complete in all respects with all accessories, to the full satisfaction of the Curator.

COIN CABINET(SHOWCASE 19): Supplying, making and fixing in position SHOWCASE 19 (1500 height, 600 wide and 600 depth mm), as per design, with bottom part as Pedestal of (900X600X600mm) made of 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of desired quality and top portion of 5mm thick heavy sheet float glass panes of (600X 600 X600mm) with facility for opening one side, finished with desired finish complete in all respects with all accessories, to the full satisfaction of the Curator.

SHOWCASE 20 (CYCLE ON PEDESTAL): Supplying, making and fixing in position SHOWCASE 20 (300 height, 2400 wide and 800 depth), as per design made of 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of desired quality finished with desired finish complete in all respects with all accessories, to the full satisfaction of the Curator.

wall mounted shelf 24: Supplying, making and fixing in position SHELF 24 (2175 height, 2541 wide and 400 depth), as per design, with compartments (423 X926 X 400) and (212 x 494 x450) made of 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of desired quality finished with desired finish complete in all respects with all accessories, to the full satisfaction of the Curator.

SHOWCASE 8 (POTTERY + TERRACOTA) : Supplying, making and fixing in position baggage shelf (2200 height, 2900 wide and 450 depth), as per design, made of 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of desired quality finished with middle portion of 5mm thick heavy sheet float glass panes with desired finish complete in all respects with all accessories, to the full satisfaction of the Curator.

Window and Ventilator blocking of gallery 2

Supply of 90 cm x 55 cm decorative coir door mat of approved design

Supply of Wooden 450mm x 1500mm x 450mm sized bench type seating of approved design

Electrical

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non-residential buildings).

Supply and installation of ceiling fan of 900mm dia Havells or equivalent make

Supply and installation of 18" dia exhaust fan of Havells or equivalent make

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supply installation testing and commissioning of light fixtures of different variety (Track light, spot lights, micro pole light, CoB of approved technical specification of Jaquar, Wipro, Changi or equivalent make.

Fire Safety

Supply and installation of standalone smoke detector

Supply and installation of 4.5 kg CO2 based fire extinguisher

Supply of Fire Balls

Emergency exit sign

Display Works

Supply, pasting and installation of Vinyl print of the approved content pasted on sun board as directed

Supply and installation of 2mm thick float glass, MDF back support, mount and fibre frame with framing of approved sizes complete with mounting and installation as directed.

LED Display: 24'' FHD LED Display, of approved make complete with necessary mounting arrangement

Miscellaneous Work

Any other items not included above as may require to complete the project with duly approved by tender inviting authority amounting not more than 5% of the tender value