Department Of Cooperation Tender

... More
The Department Of Cooperation has issued a formal invitation for competitive bids for Renovation Work Of Various Laboratories At Cotton University, Guwahati, Assam Under Pm Usha By Rashtriya Uchchatar Shiksha Abhiyan, Assam in Kamrup Metro, Assam, with an estimated contract value of Rs. 1,64,54,340. The bid opening date for this tender is 03-11-2026 and the last date for bid submission is 25-11-2026. Interested bidders for Department Of Cooperation tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Department Of Cooperation Tender - Assam Tender

Opening Date3 Nov 2026
Closing Date25 Nov 2026
Tender Amount₹ 1,64,54,340 
Notes
Download

Costs

Description

Renovation Work Of Various Laboratories At Cotton University, Guwahati, Assam Under Pm Usha By Rashtriya Uchchatar Shiksha Abhiyan, Assam

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
12 mm cement plaster (both side) of mix 1:4 (1 Cement: 4 Sand)

16.04

294

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers Lintels, beams, plinth beams, girders, bressumers and cantilevers

11.74

608

-

... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

0.82

10719

-

... More
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level). TMT-Corrosion Resistant Steel (Fe-500) reinforcement bar (Note: 8mm bar @ 125mm spacing)

67.6

88

-

... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby red. Area slab over 0.50 Sqm (with 5% wastage)

11.25

3301

-

... More
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. (with 5% wastage)

18.04

475

-

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

1280

123

-

... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

1280

64

-

... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

1280

116

-

... More
Repairing of existing wooden laboratory cabinet below RCC working platform, including rectification of damaged portions, replacement of deteriorated wooden members, hinges, handles, screws, minor joinery work, surface preparation, and finishing with paint/polish as required, complete in all respects as directed.

130

515

-

... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. # In cement mortar

0.315

1698

-

... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal Wood

0.06

106720

-

... More
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

2.1

1881

-

... More
Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

5

61

-

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

5

191

-

... More
New Laboratory Table: Providing and fabricating wooden laboratory table of size 1800 × 900 × 900 mm using good quality hardwood (teak / hollock or other approved durable hardwood) for structural members and BWR/BWP grade plywood (ISI marked) for panels, including table top, vertical supports, internal framework complete. The item includes providing and fixing storage cabinets below with shutters, internal shelves, partitions, necessary fittings and fixtures such as stainless steel/brass hinges, handles, locks, tower bolts, screws, etc. complete. Further, the item includes table top finished with 1.0 mm thick decorative laminate (approved make) over plywood base or equivalent durable finish, and all other surfaces finished with melamine polish / synthetic enamel paint (as specified), including surface preparation, sanding, edge finishing, complete. The rate shall include cost of all materials, labour, tools & plants, hardware, adhesives, polishing/painting materials, and all incidental charges required to complete the work as directed by Engineer-in-charge.

5.8

23964

-

... More
Repairing of Existing Lab Table with Granite Top including strengthening of structure, tightening of joints, refixing of loose members, and replacement of damaged/decayed wooden parts with new wood of matching section and approved quality complete.The item includes repair/replacement of shutters, shelves, drawers, supports (if any), and fixing/refixing of fittings and fixtures such as hinges, handles, screws, drawer channels, locks etc., complete.Further, providing and fixing 18 mm thick polished granite slab of approved quality on table top over 20 mm thick cement mortar (1:4), including cutting to required size, edge polishing, finishing and making good complete including surface preparation, scraping, sanding and applying finishing with synthetic enamel paint (as specified) to all exposed wooden surfaces to achieve a smooth and uniform finish.The rate includes cost of all materials, labour, tools & plants, hardware, adhesives, cement mortar, granite, polishing/ painting materials and all incidental charges required to complete the work as directed by the Engineer-in-charge.

12

12570

-

... More
New Wardrop/Caninet: Providing and fabricating wardrobe using HDMR (High Density Moisture Resistant) board of approved make (minimum 17–18 mm thick for carcass and shutters) including side panels, top, bottom, back panel (6–8 mm), shelves, partitions and shutters complete. The item includes providing and fixing necessary fittings and fixtures such as SS hinges (soft close), handles, locks, drawer channels (if any), screws, hanging rods, etc. complete. Further, the item includes finishing with 1.0 mm thick decorative laminate on external faces and 0.8 mm laminate on internal surfaces, including edge banding (PVC lipping), adhesive, pressing, trimming and finishing, complete. The rate shall include cost of all materials (HDMR board, laminate, hardware), labour, tools & plants, machinery, transportation and all incidental charges required to complete the work as directed by Engineer-in-charge.

10

13327

-

... More
Open Shelves over Lab Table: Providing and fixing open shelves over laboratory tables on both sides for student laboratory work, of 150 mm depth and 750 mm height above table level, using 18 mm thick HDMR board/plywood of approved quality, finished with laminate on exposed surfaces and edge banding complete. The shelves shall be properly supported and fixed to wall or suitable framework using necessary brackets/cleats, screws and fittings, ensuring alignment, stability and durability. The item shall include all materials, labour, tools & plants, cutting, edge finishing, fixing and all incidental charges required to complete the work.

5.4

3488

-

... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): For Fixed Partition: Powder coated aluminium (minimum thickness of powder coating 50 micron)** Considering 15 kg per Sqm Area

300

466

-

... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)** Considering 20 kg per Sqm Area

76

564

-

... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size 600mmx600mm

116

1416

-

... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board, 510x1040 mm bowl depth 250 mm

2

6008

-

... More
Repairing and/or replacing damaged/ defective water supply pipes of approved material (GI / CPVC / PVC as specified) including cutting, removing damaged portions, providing and fixing new pipe sections, making necessary joints, bends, tees, reducers and fittings, complete. The item includes fixing with clamps/supports, threading (for GI), solvent welding (for PVC/CPVC), testing of pipeline for leakage, and making good the damaged surfaces complete as directed by Engineer-in-charge. The rate shall include cost of all materials (pipes, fittings, clamps), labour, tools & plants and all incidental charges required to complete the work.

180

1207

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. GROUP C

80

1445

-

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

700

233

-

... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

500

275

-

... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire

297.84

334

-

... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire

150

754

-

... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

80

586

-

... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel,dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required . (Note : Vertical type MCB TPDB is normally use where 3 phase outlets are required.) 8 Way (4+24) Double Door

1

10165

-

... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

6

256

-

... More
Single Pole And Neutral

6

599

-

... More
Triple Pole

1

1007

-

... More
Tripol Pole and Neutral

1

1228

-

... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

1

13838

-

... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

4

2730

-

... More
Department of Zoology

-

-

-

... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

3.76

1018

-

... More
12 mm cement plaster (both side) of mix 1:4 (1 Cement: 4 Sand)

7.5

294

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers Lintels, beams, plinth beams, girders, bressumers and cantilevers

5.5

608

-

... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

0.375

10719

-

... More
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level). TMT-Corrosion Resistant Steel (Fe-500) reinforcement bar (Note: 8mm bar @ 125mm spacing)

31.6

88

-

... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby red. Area slab over 0.50 Sqm (with 5% wastage)

5.5

3301

-

... More
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. (with 5% wastage)

8.5

475

-

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

1206

123

-

... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

1206

64

-

... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

1206

116

-

... More
Repairing of existing wooden laboratory cabinet below RCC working platform, including rectification of damaged portions, replacement of deteriorated wooden members, hinges, handles, screws, minor joinery work, surface preparation, and finishing with paint/polish as required, complete in all respects as directed.

40

515

-

... More
New Wardrop/Caninet: Providing and fabricating wardrobe using HDMR (High Density Moisture Resistant) board of approved make (minimum 17–18 mm thick for carcass and shutters) including side panels, top, bottom, back panel (6–8 mm), shelves, partitions and shutters complete. The item includes providing and fixing necessary fittings and fixtures such as SS hinges (soft close), handles, locks, drawer channels (if any), screws, hanging rods, etc. complete. Further, the item includes finishing with 1.0 mm thick decorative laminate on external faces and 0.8 mm laminate on internal surfaces, including edge banding (PVC lipping), adhesive, pressing, trimming and finishing, complete. The rate shall include cost of all materials (HDMR board, laminate, hardware), labour, tools & plants, machinery, transportation and all incidental charges required to complete the work as directed by Engineer-in-charge.

10

13327

-

... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. # In cement mortar

0.46

1698

-

... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal Wood

0.06

106720

-

... More
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

2.1

1881

-

... More
Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

5

61

-

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

5

191

-

... More
Repairing of existing wooden doors and windows including shutters and frames, comprising removal of decayed/damaged wooden portions and replacing with new wood of matching section and approved quality, tightening of joints, refixing of members, and making good the surface complete. The item shall include repair of door/window frames, shutters, panels, beading, and necessary fittings such as hinges, handles, screws, locks etc. Further, the work includes surface preparation, putty, sanding, and applying two coats of synthetic enamel paint of approved shade and make complete as directed.

6

4509

-

... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size 600mmx600mm

30

1416

-

... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

10

60

-

... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

6

1063

-

... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size 600mmx600mm

4

1416

-

... More
Dismantling roofing including ridges, hips, valleys and gutters etc.and stackin the material within 50 metres lead of: G.S. Sheet

250

136

-

... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

250

671

-

... More
Providing and fixing false ceiling at all heights with 600x600 mm modular ceiling tiles of approved make in true horizontal level, suspended on interlocking metal grid system with T-sections, etc. complete.12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS:2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.

100

1247

-

... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board, 510x1040 mm bowl depth 250 mm

4

6008

-

... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

1

3392

-

... More
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

1

744

-

... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

1

5268

-

... More
Repairing and/or replacing damaged/ defective water supply pipes of approved material (GI / CPVC / PVC as specified) including cutting, removing damaged portions, providing and fixing new pipe sections, making necessary joints, bends, tees, reducers and fittings, complete. The item includes fixing with clamps/supports, threading (for GI), solvent welding (for PVC/CPVC), testing of pipeline for leakage, and making good the damaged surfaces complete as directed by Engineer-in-charge. The rate shall include cost of all materials (pipes, fittings, clamps), labour, tools & plants and all incidental charges required to complete the work.

60

1207

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. GROUP C

90

1445

-

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

600

233

-

... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

540

275

-

... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire

323.61

334

-

... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire

100

754

-

... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

50

586

-

... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel,dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required . (Note : Vertical type MCB TPDB is normally use where 3 phase outlets are required.) 8 Way (4+24) Double Door

1

10165

-

... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

6

256

-

... More
Single Pole And Neutral

6

599

-

... More
Triple Pole

1

1007

-

... More
Tripol Pole and Neutral

1

1228

-

... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

1

13838

-

... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

4

2730

-

... More
Department of Physics

-

-

-

... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

960

45

-

... More
15 mm cement plaster of mix 1:4 (1 Cement: 4 Sand)

960

339

-

... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

162

1018

-

... More
12 mm cement plaster (both side) of mix 1:4 (1 Cement: 4 Sand)

324

294

-

... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

8.64

1018

-

... More
12 mm cement plaster (both side) of mix 1:4 (1 Cement: 4 Sand)

17.28

294

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers Lintels, beams, plinth beams, girders, bressumers and cantilevers

13.42

608

-

... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

0.92

10719

-

... More
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level). TMT-Corrosion Resistant Steel (Fe-500) reinforcement bar (Note: 8mm bar @ 125mm spacing)

77.1

88

-

... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby red. Area slab over 0.50 Sqm (with 5% wastage)

12.81

3301

-

... More
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. (with 5% wastage)

20.3

475

-

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

2980

123

-

... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

2980

64

-

... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

2980

116

-

... More
Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement: 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

50

35

-

... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

4.5

2007

-

... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor etc., up to floor five level, excluding the cost of centering,shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate(RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto 25%)).

30

9130

-

... More
Extra for providing and mixing water proofing material @1Kg per 50 Kg of Cement in cement concrete work in doses by weight of cement as per manufacturer's specification.

2000

57

-

... More
Repairing of existing wooden doors and windows including shutters and frames, comprising removal of decayed/damaged wooden portions and replacing with new wood of matching section and approved quality, tightening of joints, refixing of members, and making good the surface complete. The item shall include repair of door/window frames, shutters, panels, beading, and necessary fittings such as hinges, handles, screws, locks etc. Further, the work includes surface preparation, putty, sanding, and applying two coats of synthetic enamel paint of approved shade and make complete as directed.

33

4509

-

... More
New Laboratory Table: Providing and fabricating wooden laboratory table of size 1800 × 900 × 900 mm using good quality hardwood (teak / hollock or other approved durable hardwood) for structural members and BWR/BWP grade plywood (ISI marked) for panels, including table top, vertical supports, internal framework complete. The item includes providing and fixing storage cabinets below with shutters, internal shelves, partitions, necessary fittings and fixtures such as stainless steel/brass hinges, handles, locks, tower bolts, screws, etc. complete. Further, the item includes table top finished with 1.0 mm thick decorative laminate (approved make) over plywood base or equivalent durable finish, and all other surfaces finished with melamine polish / synthetic enamel paint (as specified), including surface preparation, sanding, edge finishing, complete. The rate shall include cost of all materials, labour, tools & plants, hardware, adhesives, polishing/painting materials, and all incidental charges required to complete the work as directed by Engineer-in-charge.

23

23964

-

... More
New Teacher Table: Providing and supplying wooden table of size 1050 × 750 × 750 mm made of good quality hardwood (teak / hollock or other approved durable hardwood) for structural members and BWR/BWP grade plywood (ISI marked) for panels, including table top, legs/supports, drawers and internal framework complete.The item includes providing drawers with telescopic channels, internal partitions (if required) and necessary fittings and fixtures such as stainless steel/brass hinges, handles, locks, screws, etc. complete.Further, the item includes table top finished with 1.0 mm thick decorative laminate (approved make) or equivalent durable finish, and all other surfaces finished with melamine polish / synthetic enamel paint (as specified) including surface preparation, sanding and edge finishing, complete. The rate shall include cost of all materials, labour, tools & plants, hardware, adhesives, polishing/painting materials and all incidental charges required to complete the work as directed by Engineer-in-charge.

16

16881

-

... More
Teacher Wooden Bench with Backrest: Providing and supplying wooden bench of size approximately 1800 mm (length) × 450 mm (seat depth) × 850 mm (overall height with backrest) made of approved quality hardwood (teak / hollock or other durable hardwood) for structural frame including legs, supports, seat frame and backrest frame. The seat and backrest shall be made using BWP grade ISI marked plywood finished with 1.0 mm thick decorative laminate of approved make, including proper edge finishing. The item includes providing and fixing necessary fittings such as screws, brackets, fasteners, adhesive, etc., complete. All wooden surfaces shall be finished with melamine polish / synthetic enamel paint, including surface preparation, sanding and finishing complete. The item shall also include anti-termite treatment, and all materials, labour, tools & plants and incidental charges required to complete the work as directed by the Engineer-in-charge

3

20873

-

... More
Repairing of existing wooden laboratory tables with Laminated Top including strengthening of structure, tightening of joints, refixing of loose members, and replacement of damaged/decayed wooden parts with new wood of matching section and approved quality complete. The item includes repair/replacement of shutters, shelves, drawers, supports (if any), and fixing/refixing of fittings and fixtures such as hinges, handles, screws, drawer channels, locks etc., complete. Further, providing and fixing 1.0 mm thick decorative laminate of approved make on table top, including surface preparation, adhesive application, edge finishing and polishing complete. The work also includes surface preparation, scraping, sanding and applying finishing with synthetic enamel paint (as specified) to all exposed surfaces to achieve a smooth and uniform finish. The rate shall include cost of all materials, labour, tools & plants, hardware, adhesives, laminate, polishing/painting materials and all incidental charges required to complete the work as directed by the Engineer-in-charge.

45

10692

-

... More
Repairing of Existing Lab Table with Granite Top including strengthening of structure, tightening of joints, refixing of loose members, and replacement of damaged/decayed wooden parts with new wood of matching section and approved quality complete. The item includes repair/replacement of shutters, shelves, drawers, supports (if any), and fixing/refixing of fittings and fixtures such as hinges, handles, screws, drawer channels, locks etc., complete. Further, providing and fixing 18 mm thick polished granite slab of approved quality on table top over 20 mm thick cement mortar (1:4), including cutting to required size, edge polishing, finishing and making good complete. The work also includes surface preparation, scraping, sanding and applying finishing with synthetic enamel paint (as specified) to all exposed wooden surfaces to achieve a smooth and uniform finish. The rate shall include cost of all materials, labour, tools & plants, hardware, adhesives, cement mortar, granite, polishing/painting materials and all incidental charges required to complete the work as directed by the Engineer-in-charge.

7

12570

-

... More
New Wardrop: Providing and fabricating wardrobe using HDHMR (High Density Moisture Resistant) board of approved make (minimum 17–18 mm thick for carcass and shutters) including side panels, top, bottom, back panel (6–8 mm), shelves, partitions and shutters complete. The item includes providing and fixing necessary fittings and fixtures such as SS hinges (soft close), handles, locks, drawer channels (if any), screws, hanging rods, etc. complete. Further, the item includes finishing with 1.0 mm thick decorative laminate on external faces and 0.8 mm laminate on internal surfaces, including edge banding (PVC lipping), adhesive, pressing, trimming and finishing, complete. The rate shall include cost of all materials (HDMR board, laminate, hardware), labour, tools & plants, machinery, transportation and all incidental charges required to complete the work as directed by Engineer-in-charge.

2.4

13327

-

... More
Computer Workstation at Computer Lab (Double Side – 8 Seater, Prelaminated HDHMR Board with Electrical): Providing and installing modular computer workstation of 8 seats (4 on each side) of size 900 × 600 mm each, made of 18 mm thick prelaminated HDHMR boards for table tops, partitions and all components, including 2 mm PVC edge banding, central partition, modesty panels and cable management system complete. The item includes providing and fixing electrical points for each workstation comprising wiring, switches, sockets, conduits/casing, and necessary accessories, complete. The work shall include all fittings, fixtures, hardware, adhesives, fabrication, installation, testing and commissioning, and all materials, labour, tools & plants and incidental charges required to complete the work as directed by the Engineer-in-charge.

1

81836

-

... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): For Fixed Partition: Powder coated aluminium (minimum thickness of powder coating 50 micron)** Considering 15 kg per Sqm Area

885

466

-

... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)** Considering 20 kg per Sqm Area

246

564

-

... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes

66.3

940

-

... More
Repairing of existing aluminium partition including dismantling of damaged/defective portions, replacement of damaged aluminium sections with new sections of matching size and specification, straightening and realignment of frame members, tightening of joints, and refixing in proper position complete. The item includes repair/replacement of panels (glass/board if required), fixing/refixing of beading, rubber gaskets, sealant, and replacement of fittings and accessories such as screws, cleats, fasteners, handles, locks (if any), etc., complete. Further, the item includes cleaning, minor surface finishing and making good the adjoining surfaces to restore the partition to proper working condition, complete as directed by Engineer-in-charge. The rate shall include cost of all materials (aluminium sections, glass/board portions, fittings), labour, tools & plants and all incidental charges required to complete the work.

34

2066

-

... More
Repairing of existing aluminium windows by dismantling damaged portions, refixing and realignment of frame and shutters, tightening of joints, replacement of defective aluminium sections (up to 20%), including removal and refixing/replacement of glass panes (where required), providing and fixing rubber gaskets, sealant, screws, fasteners, handles, hinges, locks, rollers (for sliding type) and all necessary fittings complete, ensuring smooth operation and proper functioning of the window, complete in all respects.

18.4

2235

-

... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawl plugs screws etc. @20Kg/m2

150

181

-

... More
Vinyl Flooring: Providing and laying PVC/Vinyl flooring of approved thickness (2–3 mm or as specified) over properly prepared, smooth and level surface, including cleaning, application of approved adhesive, laying of flooring sheets/tiles, cutting to required size, jointing, rolling with suitable roller, finishing and making good edges complete as directed by Engineer-in-charge. The rate shall include cost of all materials (PVC/Vinyl flooring, adhesive), labour, tools & plants and all incidental charges required to complete the work.

54

1167

-

... More
Curtains: Providing and fixing curtains of approved fabric, design and shade including stitching, pleating and finishing, complete. The item includes providing and fixing curtain rods/tracks of approved make (MS/SS/ aluminium) with necessary brackets, supports, runners, rings, finials, end caps, screws and fasteners, fixing in position and making good the surface complete as directed by Engineer-in-charge.The rate shall include cost of all materials (curtain fabric, rods/tracks, fittings), labour, tools & plants and all incidental charges required to complete the work.

50

2866

-

... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

78.2

60

-

... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

62

1063

-

... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size 600mmx600mm

16.2

1416

-

... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board, 510x1040 mm bowl depth 250 mm

12

6008

-

... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

5

3392

-

... More
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

4

744

-

... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

4

5268

-

... More
Repairing and/or replacing damaged/ defective water supply pipes of approved material (GI / CPVC / PVC as specified) including cutting, removing damaged portions, providing and fixing new pipe sections, making necessary joints, bends, tees, reducers and fittings, complete. The item includes fixing with clamps/supports, threading (for GI), solvent welding (for PVC/CPVC), testing of pipeline for leakage, and making good the damaged surfaces complete as directed by Engineer-in-charge. The rate shall include cost of all materials (pipes, fittings, clamps), labour, tools & plants and all incidental charges required to complete the work.

102.34

1207

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. GROUP C

90

1445

-

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

600

233

-

... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

450

275

-

... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire

150

334

-

... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire

100

754

-

... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

90

586

-

... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel,dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required . (Note : Vertical type MCB TPDB is normally use where 3 phase outlets are required.) 8 Way (4+24) Double Door

1

10165

-

... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

8

256

-

... More
Single Pole And Neutral

8

599

-

... More
Triple Pole

1

1007

-

... More
Tripol Pole and Neutral

1

1228

-

... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

1

13838

-

... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

4

2730

-

... More
Providing and fixing 2.0 TR (2 Ton) capacity high energy-efficient inverter type split air conditioner of approved make, with copper condenser, rotary compressor and remote control operation, including indoor and outdoor units, interconnecting copper piping up to 5 m length, electrical cabling, drain piping, necessary insulation, supports and accessories, complete. Including providing and fixing ODU stand, testing, commissioning and handing over complete in all respects as per manufacturer’s specifications and as directed by Engineer-in-charge.

3

62794

-

... More
Department of Chemistry

-

-

-

... More
Repair of Existing Laboratory Table with Replacement of Top by Acid-Proof Granite: Repairing of existing laboratory table with brick masonry supports and RCC slab top by dismantling and removing existing marble, cleaning surface and disposal of debris complete. Providing and fixing acid-resistant granite slab of approved shade and 18–20 mm thickness over the prepared surface using suitable adhesive/mortar, including cutting, edge polishing, rounding, necessary cut-outs, alignment and finishing complete. Including minor repairs to existing masonry/RCC, joint filling and sealing with chemical resistant sealant. Wherever required, increasing the height up to 900 mm by additional brick masonry over existing structure with proper bonding, finishing and making ready for granite fixing shall be included. The rate includes all materials, labour, tools & plants and incidental charges complete. Note: Basin fixing and plumbing shall be paid separately.

58

8812

-

... More
Dismantling and complete demolition of existing laboratory table including marble/granite top, RCC slab, brick masonry supports, and all associated components, by manual/mechanical means as required. Carefully removing all dismantled materials, stacking serviceable materials if any as directed, and disposing of unserviceable debris outside the premises within permissible lead, including loading, unloading and transportation. Cleaning the site and making the area ready for new work complete. The rate includes all labour, tools & plants, safety measures and incidental charges complete.

6

455

-

... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

22.5

1018

-

... More
12 mm cement plaster (both side) of mix 1:4 (1 Cement: 4 Sand)

45

294

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers Lintels, beams, plinth beams, girders, bressumers and cantilevers

30

608

-

... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

2.025

10719

-

... More
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level). TMT-Corrosion Resistant Steel (Fe-500) reinforcement bar (Note: 8mm bar @ 125mm spacing)

170

88

-

... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby red. Area slab over 0.50 Sqm (with 5% wastage)

28.35

3301

-

... More
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. (with 5% wastage)

60

475

-

... More
Acid Proof Tile Flooring: Dismantling of existing pucca floor including removal of base layers (if required), cleaning of surface and disposal of debris complete. Providing and laying acid-resistant floor tiles of approved size, thickness and quality in laboratory area over prepared base using suitable tile adhesive/cement mortar, including proper alignment, cutting, jointing, grouting with chemical/epoxy resistant material, finishing to required level and slope, curing and making good complete as directed by Engineer-in-charge. The rate shall include cost of all materials, labour, tools & plants and all incidental charges required to complete the work.

160

2709

-

... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size 600mmx600mm

60

1416

-

... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

50

45

-

... More
15 mm cement plaster of mix 1:4 (1 Cement: 4 Sand)

50

339

-

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

672

123

-

... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

672

64

-

... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

672

116

-

... More
Providing New Fume Hood by dismantling of existing fume hood including removal of all components, cleaning of area and disposal of debris complete. Providing and installing new fume hood of approximate size 1.5 m × 1.5 m × 1.8 m height, including fabrication of structure, acid-resistant internal lining and work surface, and all necessary supporting framework complete. Providing and fixing sliding sash/door made of acid-resistant material, ensuring smooth operation and proper sealing. The item shall include all structural modifications, fittings, finishing works, materials, labour, tools & plants and all incidental charges required to complete the work as directed by Engineer-in-charge.

2

59035

-

... More
Providing and fixing false ceiling at all heights with 600x600 mm modular ceiling tiles of approved make in true horizontal level, suspended on interlocking metal grid system with T-sections, etc. complete.12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS:2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.

50

1247

-

... More
Wardrop/Cabinet/Locker/Storage: Providing and fabricating wardrobe using HDMR (High Density Moisture Resistant) board of approved make (minimum 17–18 mm thick for carcass and shutters) including side panels, top, bottom, back panel (6–8 mm), shelves, partitions and shutters complete. The item includes providing and fixing necessary fittings and fixtures such as SS hinges (soft close), handles, locks, drawer channels (if any), screws, hanging rods, etc. complete. Further, the item includes finishing with 1.0 mm thick decorative laminate on external faces and 0.8 mm laminate on internal surfaces, including edge banding (PVC lipping), adhesive, pressing, trimming and finishing, complete. The rate shall include cost of all materials (HDMR board, laminate, hardware), labour, tools & plants, machinery, transportation and all incidental charges required to complete the work as directed by Engineer-in-charge.

66

13327

-

... More
Open Shelves over Lab Table: Providing and fixing open shelves over laboratory tables on both sides for student laboratory work, of 150 mm depth and 750 mm height above table level, using 18 mm thick HDMR board/plywood of approved quality, finished with laminate on exposed surfaces and edge banding complete. The shelves shall be properly supported and fixed to wall or suitable framework using necessary brackets/cleats, screws and fittings, ensuring alignment, stability and durability. The item shall include all materials, labour, tools & plants, cutting, edge finishing, fixing and all incidental charges required to complete the work.

10

3488

-

... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. # In cement mortar

0.47

1698

-

... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal Wood

0.06

106720

-

... More
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

2.1

1881

-

... More
Applying priming coat w ith ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

5

61

-

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

5

191

-

... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board, 510x1040 mm bowl depth 250 mm

18

6008

-

... More
Repairing and/or replacing damaged/ defective water supply pipes of approved material (GI / CPVC / PVC as specified) including cutting, removing damaged portions, providing and fixing new pipe sections, making necessary joints, bends, tees, reducers and fittings, complete. The item includes fixing with clamps/supports, threading (for GI), solvent welding (for PVC/CPVC), testing of pipeline for leakage, and making good the damaged surfaces complete as directed by Engineer-in-charge. The rate shall include cost of all materials (pipes, fittings, clamps), labour, tools & plants and all incidental charges required to complete the work.

153.26

1207

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. GROUP C

90

1445

-

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

550

233

-

... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

450

275

-

... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire

200

334

-

... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire

100

754

-

... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

100

586

-

... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel,dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required . (Note : Vertical type MCB TPDB is normally use where 3 phase outlets are required.) 8Way (4+24) Double Door

1

10165

-

... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

6

256

-

... More
Single Pole And Neutral

6

599

-

... More
Triple Pole

1

1007

-

... More
Tripol Pole and Neutral

1

1228

-

... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

4

2730

-

... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

1

13838

-

... More
Department of Geology

-

-

-

... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

22.5

1018

-

... More
12 mm cement plaster (both side) of mix 1:4 (1 Cement: 4 Sand)

45

294

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers Lintels, beams, plinth beams, girders, bressumers and cantilevers

30

608

-

... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

2.025

10719

-

... More
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete . TMT-Corrosion Resistant Steel (Fe-500) reinforcement bar (8mm bar @ 125mm spacing)

170

88

-

... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby red. Area slab over 0.50 Sqm (with 5% wastage)

28.35

3301

-

... More
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. (with 5% wastage)

60

475

-

... More
Wardrop/Cabinet: Providing and fabricating wardrobe using HDMR (High Density Moisture Resistant) board of approved make (minimum 17–18 mm thick for carcass and shutters) including side panels, top, bottom, back panel (6–8 mm), shelves, partitions and shutters complete. The item includes providing and fixing necessary fittings and fixtures such as SS hinges (soft close), handles, locks, drawer channels (if any), screws, hanging rods, etc. complete. Further, the item includes finishing with 1.0 mm thick decorative laminate on external faces and 0.8 mm laminate on internal surfaces, including edge banding (PVC lipping), adhesive, pressing, trimming and finishing, complete. The rate shall include cost of all materials (HDMR board, laminate, hardware), labour, tools & plants, machinery, transportation and all incidental charges required to complete the work as directed by Engineer-in-charge.

17

13327

-

... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): For Fixed Partition: Powder coated aluminium (minimum thickness of powder coating 50 micron)** Considering 15 kg per Sqm Area

473.5

466

-

... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)** Considering 20 kg per Sqm Area

134.01

564

-

... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board, 510x1040 mm bowl depth 250 mm

6

6008

-

... More
Department of Mass Communications

-

-

-

... More
Dismantling roofing including ridges, hips, valleys and gutters etc.and stackin the material within 50 metres lead of: G.S. Sheet

60

136

-

... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

60

671

-

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

120

123

-

... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

120

64

-

... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

127.28

116

-

... More
Providing and fixing false ceiling at all heights with 600x600 mm modular ceiling tiles of approved make in true horizontal level, suspended on interlocking metal grid system with T-sections, etc. complete.12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS:2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.

60

1247

-

... More
Department of Education

-

-

-

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

150

123

-

... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

150

64

-

... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

150

116

-

... More
Curtains: Providing and fixing curtains of approved fabric, design and shade including stitching, pleating and finishing, complete. The item includes providing and fixing curtain rods/tracks of approved make (MS/SS/ aluminium) with necessary brackets, supports, runners, rings, finials, end caps, screws and fasteners, fixing in position and making good the surface complete as directed by Engineer-in-charge.The rate shall include cost of all materials (curtain fabric, rods/tracks, fittings), labour, tools & plants and all incidental charges required to complete the work.

20

2866

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. GROUP C

30

1445

-

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

200

233

-

... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

119.97

275

-

... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire

50

334

-

... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire

50

754

-

... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

50

586

-

... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel,dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required . (Note : Vertical type MCB TPDB is normally use where 3 phase outlets are required.) 8 Way (4+24) Double Door

1

10165

-

... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

4

256

-

... More
Single Pole And Neutral

4

599

-

... More
Triple Pole

1

1007

-

... More
Tripol Pole and Neutral

1

1228

-

... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

1

13838

-

... More
Providing and fixing 2.0 TR (2 Ton) capacity high energy-efficient inverter type split air conditioner of approved make, with copper condenser, rotary compressor and remote control operation, including indoor and outdoor units, interconnecting copper piping up to 5 m length, electrical cabling, drain piping, necessary insulation, supports and accessories, complete. Including providing and fixing ODU stand, testing, commissioning and handing over complete in all respects as per manufacturer’s specifications and as directed by Engineer-in-charge.

2

62794

-

... More
Department of Geography

-

-

-

... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

1.08

1018

-

... More
12 mm cement plaster (both side) of mix 1:4 (1 Cement: 4 Sand)

2.16

294

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers Lintels, beams, plinth beams, girders, bressumers and cantilevers

2.42

608

-

... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

0.18

10719

-

... More
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level). TMT-Corrosion Resistant Steel (Fe-500) reinforcement bar (Note: 8mm bar @ 125mm spacing)

14

88

-

... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby red. Area slab over 0.50 Sqm (with 5% wastage)

2.31

3301

-

... More
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. (with 5% wastage)

2.2

475

-

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

110.56

123

-

... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

110.56

64

-

... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

110.56

116

-

... More
Wardrop/Cabinet: Providing and fabricating wardrobe using HDMR (High Density Moisture Resistant) board of approved make (minimum 17–18 mm thick for carcass and shutters) including side panels, top, bottom, back panel (6–8 mm), shelves, partitions and shutters complete. The item includes providing and fixing necessary fittings and fixtures such as SS hinges (soft close), handles, locks, drawer channels (if any), screws, hanging rods, etc. complete. Further, the item includes finishing with 1.0 mm thick decorative laminate on external faces and 0.8 mm laminate on internal surfaces, including edge banding (PVC lipping), adhesive, pressing, trimming and finishing, complete. The rate shall include cost of all materials (HDMR board, laminate, hardware), labour, tools & plants, machinery, transportation and all incidental charges required to complete the work as directed by Engineer-in-charge.

3.3

13327

-

... More
Vinyl Flooring: Providing and laying PVC/Vinyl flooring of approved thickness (2–3 mm or as specified) over properly prepared, smooth and level surface, including cleaning, application of approved adhesive, laying of flooring sheets/tiles, cutting to required size, jointing, rolling with suitable roller, finishing and making good edges complete as directed by Engineer-in-charge.

72

1167

-

... More
Repairing and/or replacing damaged/ defective water supply pipes of approved material (GI / CPVC / PVC as specified) including cutting, removing damaged portions, providing and fixing new pipe sections, making necessary joints, bends, tees, reducers and fittings, complete. The item includes fixing with clamps/supports, threading (for GI), solvent welding (for PVC/CPVC), testing of pipeline for leakage, and making good the damaged surfaces complete as directed by Engineer-in-charge. The rate shall include cost of all materials (pipes, fittings, clamps), labour, tools & plants and all incidental charges required to complete the work.

5

1207

-

... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board, 510x1040 mm bowl depth 250 mm

1

6008

-

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

80

275

-

... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

1

13838

-

... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

20

586

-

... More
Department of Environmental Science

-

-

-

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

110

123

-

... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

110

64

-

... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

110

116

-

... More
Repairing of existing aluminium windows by dismantling damaged portions, refixing and realignment of frame and shutters, tightening of joints, replacement of defective aluminium sections (up to 20%), including removal and refixing/replacement of glass panes (where required), providing and fixing rubber gaskets, sealant, screws, fasteners, handles, hinges, locks, rollers (for sliding type) and all necessary fittings complete, ensuring smooth operation and proper functioning of the window, complete in all respects.

30

2235

-

... More
Repairing and/or replacing damaged/ defective water supply pipes of approved material (GI / CPVC / PVC as specified) including cutting, removing damaged portions, providing and fixing new pipe sections, making necessary joints, bends, tees, reducers and fittings, complete. The item includes fixing with clamps/supports, threading (for GI), solvent welding (for PVC/CPVC), testing of pipeline for leakage, and making good the damaged surfaces complete as directed by Engineer-in-charge. The rate shall include cost of all materials (pipes, fittings, clamps), labour, tools & plants and all incidental charges required to complete the work.

50

1207

-

... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board, 510x1040 mm bowl depth 250 mm

2

6008

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. GROUP C

50

1445

-

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

152.28

233

-

... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

90

275

-

... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

1

13838

-

... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

40

586

-

... More
Department of Computer Science and Information Technology

-

-

-

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

650

123

-

... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

650

64

-

... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

650

116

-

... More
Vinyl Flooring: Providing and laying PVC/Vinyl flooring of approved thickness (2–3 mm or as specified) over properly prepared, smooth and level surface, including cleaning, application of approved adhesive, laying of flooring sheets/tiles, cutting to required size, jointing, rolling with suitable roller, finishing and making good edges complete as directed by Engineer-in-charge. The rate shall include cost of all materials (PVC/Vinyl flooring, adhesive), labour, tools & plants and all incidental charges required to complete the work.

56

1167

-

... More
Curtains: Providing and fixing curtains of approved fabric, design and shade including stitching, pleating and finishing, complete. The item includes providing and fixing curtain rods/tracks of approved make (MS/SS/ aluminium) with necessary brackets, supports, runners, rings, finials, end caps, screws and fasteners, fixing in position and making good the surface complete as directed by Engineer-in-charge.The rate shall include cost of all materials (curtain fabric, rods/tracks, fittings), labour, tools & plants and all incidental charges required to complete the work.

40

2866

-

... More
Providing and fixing false ceiling at all heights with 600x600 mm modular ceiling tiles of approved make in true horizontal level, suspended on interlocking metal grid system with T-sections, etc. complete.12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS:2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.

56

1247

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. GROUP C

20

1445

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. GROUP B

20

759

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. GROUP C

15

966

-

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

300

233

-

... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

100

275

-

... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire

50

334

-

... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire

50

754

-

... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

50

586

-

... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel,dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required . (Note : Vertical type MCB TPDB is normally use where 3 phase outlets are required.) 8 Way (4+24) Double Door

1

10165

-

... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

10

256

-

... More
Single Pole And Neutral

10

599

-

... More
Triple Pole

1

1007

-

... More
Tripol Pole and Neutral

1

1228

-

... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

1

13838

-

... More
Providing and fixing 2.0 TR (2 Ton) capacity high energy-efficient inverter type split air conditioner of approved make, with copper condenser, rotary compressor and remote control operation, including indoor and outdoor units, interconnecting copper piping up to 5 m length, electrical cabling, drain piping, necessary insulation, supports and accessories, complete. Including providing and fixing ODU stand, testing, commissioning and handing over complete in all respects as per manufacturer’s specifications and as directed by Engineer-in-charge.

6

62794

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.