Bodoland Territorial Council Tender
... More
The BTC has issued a formal invitation for competitive bids for the Bodoland Territorial Council project, for Construction Of Additional Classrooms At Serfanguri High School (18010102308), District- Kokrajhar Under Dharti Aaba Janjatiya Gram Utkarsh Abhiyan (dajgua) Tribal Affairs (plain) For The Financial Year 2026-27.tn_53_04 in Kokrajhar, Assam, with an estimated contract value of Rs. 25,00,000. The bid opening date for this tender is 30-10-2026 and the last date for bid submission is 23-11-2026. Interested bidders for Bodoland Territorial Council tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Bodoland Territorial Council - BTC Tender - Assam Tender
Opening Date30 Oct 2026
Closing Soon23 Nov 2026
Tender Amount₹ 25,00,000
Costs
EMD
₹ 50,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Construction Of Additional Classrooms At Serfanguri High School (18010102308), District- Kokrajhar Under Dharti Aaba Janjatiya Gram Utkarsh Abhiyan (dajgua) Tribal Affairs (plain) For The Financial Year 2026-27.tn_53_04
Contact
Tender Id
2026_BTC_54680_1Tender No
ACE-83/NIT/DAJGUA/BTC/2026-27Tender Authority
Bodoland Territorial Council ViewPurchaser Address
-Website
https://www.bodoland.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
4.10. Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).
10.05
-
-
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 2.35.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 to match the existing floor: 2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
96
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
21.99
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
4.188
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with : 5.3 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
4.02
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for : 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete
89.29
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for : 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts
55.8
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for : 5.9.21 Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick
39.03
-
-
... More
Brick-on-edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm cement mortar (1:6), including filling joints with sand, with common burnt clay non-modular bricks. 11.1.2
102.05
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand)
6.32
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 6.13.2 Cement mortar 1:4 (1 cement : 4 coarse sand)
100.83
-
-
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 11.6.1 18 mm thick
14.43
-
-
... More
12 mm cement plaster of mix : 13.4.1 1:4 (1 cement : 4 coarse sand)
184.4
-
-
... More
Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch), excluding the cost of purlins, rafters and trusses. 12.10 0.63 mm thick with zinc coating not less than 275 gm/m²
156.8
-
-
... More
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 12.4.1 0.80 mm thick with zinc coating not less than 275 gm/m²
16.9
-
-
... More
Providing and fixing 15 mm thick densified tegular edged eco-friendly calcium silicate false ceiling tiles (595 x 595 mm) suspended on interlocking galvanised steel T-grid system at all heights. 12.53
96
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 19.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
8.82
-
-
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer
552.58
-
-
... More
Finishing walls with water proofing cement paint of required shade : 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm)
552.58
-
-
... More
Providing and fixing aluminium butt hinges, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with necessary screws etc. complete : 9.95.3 100 x 75 x 4 mm
12
-
-
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 9.96.1 300 x 16 mm
12
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 9.97.2 250 x 10 mm
10
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 9.100.2 100 mm
10
-
-
... More
Supplying, assembling, lowering and fixing in vertical position double-glazed hermetically sealed glazing units in aluminium windows/ventilators with 6 mm clear float glass on both sides, 12 mm air gap, EPDM gasket, and sealants complete as per direction of Engineer-in-charge. 21.10
69.13
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.
1180.75
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.
2189.7
-
-
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.1
1840.2
-
-
... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 10.15.1 Fixing with 15 x 3 mm lugs 10 cm long embedded in cement concrete block 15 x 10 x 10 cm of C.C. 1:3:6
716.57
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.48.2 Fixed to openings/wooden frames with rawl plugs screws etc.
442.055
-
-
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. 4.17
50
-
-
... More
Internal Electrification: Supply, fitting, and fixing of 12 Nos LED Bulbs, 12 Nos Ceiling Fans, wiring, switches, sockets, MCB, casing-capping, and G.I. earthing complete as per direction of Engineer-in-charge. NSOR
1
-
-
... More
Supplying, fitting, and fixing of Granite Sign Board as per directed authority specifications. NSOR
1
-
-

