Bodoland Territorial Council Tender

2.4 Supplying and fixing following Way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, carth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/Isolator) 2.4.1 4 way (4 + 12), Double door

(1) 8- Passenger of Auto Door Lifts Machine 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 1.10.1 Group A

1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

5.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

1.23.4 3 pin 5/6 A socket outlet

7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade o following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 7.1.1 Upto 35 sq. mm

2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2.10.1 Single pole

2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2010.1 Single pole

1.24.3 15/16 A switch

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 1.24.1 5/6 A switch

MR-3 Design, manufacturing, supply, installation, testing & commissioning of 16 Mtr, Galvanized Polygonal High Mast Lighting Tower with 6 Nosa 200 Watt LED Flood Light Luminaires in 3 (Three) sections suitable for 47 M/Sec wind speed, Conforming to material construction-355 grade as per BSEN 10 025, Bottom diameter (in mm)-540, Top diameter (in mm)-150, Plate thickness for top (in mm)-3, Plate thickness for middle (in mm)-4, Plate thickness for Bottom (in mm)-5, Diameter of base plate (in mm)-740, Provision forcable termination-MCB Isolator, head frame Lightening Finial along with accessories, Lantern carriages, Junction Box, Head frame, SS wire rope, Feeder Piller panel, Bus bars materials, LED Flood light Luminaire 200 Watt /=100 Lm/Watt. (Rated voltage 230 VAC50Hz), Earthing, Electrical system, Cable and Cable connection including Civil work etc. complete with all necessary materials as required and specified by the Department. (Make:- Surya/ Nezone / Havells / Bajaj or equivalent).

15.4 Supplying,installation,testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBS for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. 15.4.3. 3 output (l output per phase) and suitable for three phase supply

5.19 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

1.14.10 4 X 10 sq. mm +2 X 6 sq. mm earth wire

(2) 16 Mtr. High Mast Light= 2 (Two) Nos. 2.3 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, completc with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required. (But without MCB/RCCB/Isolator) 2.3.1 6 way , Double door

MR-4 Supply of following size PVC/XLPE insulated and PVC sheathed 1.1 KV Gd. Solid Aluminum conductor up to 10 sqmm, balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminum wire for single core up to 70 sq. mm, balance Aluminum strip, Glavanised wire for cables up to 2 x 10 sq. mm, 3 x 10 sq. mm, 4 x 6 sq. mm & balance all galvanized steel strip), extruded PVC Type ST2 sheathed, 650/1100 V grade as per IS 7908 (Part-I) 1988 armored U.G. cable as specified and directed by the deptt. (Havells, RR, or equivalent make as approved by this Deptt.) Considering 100 Mtr. length). 10.0 sq.mm 4 Core U.G. Cable

5.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mmthick including accessories, and providing masonry enclosure with cover plate having locking.Earthing with copper earth plate 600 mm X 600 mm X 3 nmmthiek including occcsgoricg, and providing tnasonry enclosutv with cover platc having locking an-angetnent and watering pipe of metre long etc. with charcoal/ coke and salt as rcquired.

2.10.5 Triple pole and neutral

1.10.2 Group B

5.7 Supplying and laying 6 SWG G.I., wire at 0.50 metre below ground level for conductor earth electrode, including connection/ tertnination with GI thimble etc. as required.

13.13 Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required.

Construction of Lift well pit upto plinth level , Granite work, Slab casting at the top of lift well etc.

5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

MR-2 Supplying including, installation, testing and commissioning of 8 Passenger Lift:- 544 Kgs, Speed 1 m/s, 3 Floors / 3 Stops/ Stainless Steel Car Cabin with Machine Room Less (MRL) as per following Technical specification complete as requrired and directed by the Deptt.

2.13 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2.13.2. 63 A