Bodoland Territorial Council Tender

... More
The BTC has issued a formal invitation for competitive bids for the Bodoland Territorial Council project, for Construction Of Anthaigwra Bodosa Guest House At Khagrabari (g Plus 1, 15 Rooms With Meeting Hall). Package No. Tn_54_11 in Udalguri, Assam, with an estimated contract value of Rs. 4,84,14,992. The bid opening date for this tender is 07-11-2026 and the last date for bid submission is 27-11-2026. Interested bidders for Bodoland Territorial Council tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Bodoland Territorial Council - BTC Tender - Assam Tender

Opening Date7 Nov 2026
Closing Date27 Nov 2026
Tender Amount₹ 4,84,14,992 
Notes
Download

Costs

Summary

Construction Of Anthaigwra Bodosa Guest House At Khagrabari (g Plus 1, 15 Rooms With Meeting Hall). Package No. Tn_54_11

Description

Construction Of Anthaigwra Bodosa Guest House At Khagrabari (g Plus 1, 15 Rooms With Meeting Hall)

AI Insights

Unlock AI Insights for this Tender

Sign in to request AI-powered insights, eligibility criteria and automated analysis for this tender.

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
2.34 Supplying chemical emulsion in sealed containers including delivery as specified. 2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

129.8

-

-

... More
2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

648.97

-

-

... More
16.12 Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete : 16.12.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

1143.44

-

-

... More
4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.6 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)

33.18

-

-

... More
4.17 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

69.72

-

-

... More
4.1 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)

73.19

-

-

... More
5.9 Centring and shuttering including strutting,propping etc. and removal of form for 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete

158.76

-

-

... More
5.9 Centring and shuttering including strutting,propping etc. and removal of form for 5.9.5 Lintels, beams, plinth bams, griders, bressumers and cantilevers.

312.48

-

-

... More
5.9 Centring and shuttering including strutting,propping etc. and removal of form for 5.9.3 Suspended floors, roofs, landings, balconies and access platform

1386.58

-

-

... More
5.9 Centring and shuttering including strutting,propping etc. and removal of form for 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts

660.02

-

-

... More
5.9 Centring and shuttering including strutting,propping etc. and removal of form for 5.9.7 Stairs, (excluding landings) except spiral-staircases

16.88

-

-

... More
5.9 Centring and shuttering including strutting,propping etc. and removal of form for 5.9.19 Weather shade, Chajjas, corbels etc., including edges

15.12

-

-

... More
5.1 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.1 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

79.8

-

-

... More
5.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 5.2.1 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu ral sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

52.76

-

-

... More
5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

392.41

-

-

... More
5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more

12871.79

-

-

... More
5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.

63915.46

-

-

... More
6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand)

71.88

-

-

... More
6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

293.73

-

-

... More
9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 9.1.1 Second class teak wood

4.42

-

-

... More
9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

342

-

-

... More
9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

115.97

-

-

... More
9.22 Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) 9.22.1 On one side only

68.93

-

-

... More
9.74 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 9.74.1 250x10 mm

58

-

-

... More
9.74 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 9.74.3 150x10 mm

56

-

-

... More
9.82 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

10

-

-

... More
9.81 Providing and fixing bright finished brass handles with screws etc. complete: 9.81.1 125 mm

104

-

-

... More
9.170 Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 9.170.1 200 mm

10

-

-

... More
9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

16

-

-

... More
9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

5

-

-

... More
9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc.

661.63

-

-

... More
9.147D Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 9.147D.5 Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm)

46.58

-

-

... More
9.147D Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 9.147D.1 Two track two panels sliding window made of (small series)frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm

11.4

-

-

... More
9.147F Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.147F.1 Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm)

37.8

-

-

... More
21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

95.78

-

-

... More
11.4 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

662.03

-

-

... More
11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 11.41A.2 Glazed vitrified floor tiles polished finish of size 11.41A.2.2 Size of Tile 600 x 1200 mm

1194.3

-

-

... More
11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size 11.41A.3.1 Size of Tile 600 x 600 mm

103.42

-

-

... More
11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. 11.46.2 Size of Tile 600x600 mm

10.28

-

-

... More
8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

365.43

-

-

... More
11.56 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

42.5

-

-

... More
13.1 12mm cement plaster of mix : 13.1.21 1:4 (1 cement: 4 fine sand)

5901.47

-

-

... More
13.5 15 mm cement plaster on rough side of single or half brick wall of mix: 13.5.1 1:4 (1 cement: 4 fine sand)

952.06

-

-

... More
13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

5901.47

-

-

... More
13.6 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : 13.60.1 Two or more coats on new work

5901.47

-

-

... More
13.46 Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

952.06

-

-

... More
13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 Two or more coats on new work

23.4

-

-

... More
12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 12.41.2 110 mm diameter

7.6

-

-

... More
12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.5 Bend 87.5° 12.42.5.2 110 mm bend

6

-

-

... More
12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.6 Shoe (Plain) 12.42.6.2 110 mm Shoe

6

-

-

... More
12.43 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 12.43.2 110 mm

24

-

-

... More
12.45 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

1382.2

-

-

... More
SANITARY INSTALLATION & WATER SUPPLY 17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid each

23

-

-

... More
17.18.1 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete. 10 litre capacity - white.

23

-

-

... More
17.20.1 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete. White solid plastic seat with lid.

23

-

-

... More
17.22 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.

23

-

-

... More
17.16A Providing and fixing 8 mm dia C.P. / S.S. jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer-in-charge.

23

-

-

... More
17.7.3 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White vitreous china wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.

25

-

-

... More
17.10.1.1 Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board 510x1040 mm, bowl depth 250 mm.

1

-

-

... More
17.31 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

25

-

-

... More
17.73.1 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

21

-

-

... More
18.65 Providing and fixing PTMT soap dish holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms.

25

-

-

... More
17.34.2 Providing and fixing toilet paper holder - vitreous china.

23

-

-

... More
17.22A Providing and fixing CP Brass 32 mm size bottle trap of approved quality and make as per the direction of Engineer-in-charge.

26

-

-

... More
17.60.2.2 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. 100 mm inlet and 75 mm outlet, sand cast iron S&S as per IS:1729.

21

-

-

... More
17.35.1.1 Providing and fixing soil, waste and vent pipes. 100 mm dia sand cast iron S&S pipe as per IS:1729.

230

-

-

... More
17.35.2.1 Providing and fixing soil, waste and vent pipes. 75 mm dia sand cast iron S&S pipe as per IS:1729.

230

-

-

... More
17.39.1.1 Providing and fixing plain bend of required degree. 100 mm dia sand cast iron S&S as per IS:1729.

82

-

-

... More
17.44.1.1 Providing and fixing single equal plain junction of required degree. 100x100x100 mm sand cast iron S&S as per IS:1729.

46

-

-

... More
17.39.2.1 Providing and fixing plain bend of required degree. 75 mm dia sand cast iron S&S as per IS:1729.

92

-

-

... More
17.56.1.1 Providing and fixing terminal guard. 100 mm sand cast iron S&S as per IS:1729.

22

-

-

... More
17.36.2 Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I./C.I. pipes. 100 mm dia pipe.

300

-

-

... More
17.36.1 Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I./C.I. pipes. 75 mm dia pipe.

246

-

-

... More
17.59.1 Providing and fixing M.S. stays and clamps for sand cast iron / centrifugally cast (spun) iron pipes of diameter 100 mm.

185

-

-

... More
17.59.2 Providing and fixing M.S. stays and clamps for sand cast iron / centrifugally cast (spun) iron pipes of diameter 75 mm.

169

-

-

... More
17.65.1 Painting sand cast iron / centrifugally cast (spun) iron soil, waste, vent pipes and fittings with two coats of synthetic enamel paint over a coat of primer (of approved quality) for new work. 100 mm diameter pipe.

275

-

-

... More
17.65.2 Painting sand cast iron / centrifugally cast (spun) iron soil, waste, vent pipes and fittings with two coats of synthetic enamel paint over a coat of primer (of approved quality) for new work. 75 mm diameter pipe.

249

-

-

... More
18.56.1 Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 107 mm long, weighing not less than 110 gms.

3

-

-

... More
17.22B Providing and fixing CP Brass single lever telephonic wall mixer of quality and make as approved by Engineer-in-charge. 15 mm nominal dia.

17

-

-

... More
18.49.1 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. 15 mm nominal bore.

21

-

-

... More
18.16.1 Providing and fixing brass stop cock of approved quality. 15 mm nominal bore.

28

-

-

... More
18.8.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing, jointing with one step CPVC solvent cement, cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 32 mm nominal dia pipes.

115

-

-

... More
18.8.3 CPVC pipes, concealed work, as per item above. 25 mm nominal dia pipes.

130

-

-

... More
18.8.2 CPVC pipes, concealed work, as per item above. 20 mm nominal dia pipes.

130

-

-

... More
18.8.1 CPVC pipes, concealed work, as per item above. 15 mm nominal dia pipes.

305

-

-

... More
18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end). 25 mm nominal bore.

14

-

-

... More
18.17.2 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end). 32 mm nominal bore.

2

-

-

... More
18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

4000

-

-

... More
18.18.3 Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete. 25 mm nominal bore (one per tank).

3

-

-

... More
8.1.1 Preparation of site for placement of the drilling rig including excavation of mud pit, circulation drain, collection chamber etc. all complete as directed.

1

-

-

... More
8.1.3 Transportation of all ancillary equipments, camp materials, welding set, rig accessories etc. including cost of P.O.L. all complete as directed. (a) for less than 100.00 m

100

-

-

... More
8.1.4 Transportation of all store materials like pipes, strainer, cone, socket, clamp, bentonite etc. including cost of P.O.L. all complete as directed. (a) for less than 100.00 m (b) Beyond 100.00 m

100

-

-

... More
8.1.5 Transportation of air compressor with all accessories including cost of P.O.L. all complete as directed. (a) for less than 100.00 m (b) Beyond 100.00 m

100

-

-

... More
8.1.6 Transportation of P.O.L. all complete as directed.

1000

-

-

... More
8.1.7 Construction of temporary accommodation and low cost sanitary facility for drilling staff including cost of camp materials viz. cots, tables, chairs, utensils, dresses, safety helmets etc. and dismantling the accommodation after completion of the work all complete as directed.

1

-

-

... More
8.1.8 Providing water supply facilities at drilling site all complete as directed. (a) By installing 1 Nos. of Singur hand pump

1

-

-

... More
8.3.1 a) Drilling with drill bit in overburden portion of soil formation including collection of soil sample at every 3.0 m depth wherever there is a change of strata in sample boxes with distinguishing marks upto the depth of rock formation and withdrawing the drill bit for lowering casing as directed with 245mm to 300 mmm dia drill bit

10

-

-

... More
8.3.2 b) Casing / sinking / lowering of 200 mm dia MS pipe including cost of pipe and labour charge for casing, welding of joint by welding machine and sinking by drilling rig in portion all complete as directed by department.

100

-

-

... More
8.3.3 c ) 'Drilling with drilling rig using D.T.H. in all kinds of rock formation including collection of sample at every 3.0 m depth of boring or wherever there is a change of strata in sample boxes with distinguishing marks upto a required depth of boring along with breaking rock fracture for desired discharge, withdrawing drilling rod and finishing the borehole by ramming upto a required dia minimum 150mm dia upto the bottom and washing the well as per direction of the department all complete including testing of yield and drawdown of SWL of the DTW .....

90

-

-

... More
SEPTIC TANK (2 NOS.) 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m 2.8.1 All kinds of soil.

41.022

-

-

... More
2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

1.785

-

-

... More
4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

2.142

-

-

... More
5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.

246.886

-

-

... More
5.9 Centering and shuttering including strutting, propping etc. and removal of form for 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete

7.08

-

-

... More
5.9 Centering and shuttering including strutting, propping etc. and removal of form for 5.9.3 Suspended floors, roofs, landings, balconies and access platform sqm

12.667

-

-

... More
5.9 Centering and shuttering including strutting, propping etc. and removal of form for 5.9.13 Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards

3.604

-

-

... More
6.2 Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: 6.2.1 Cement mortar 1:4 (1 cement : 4 coarse sand)

9.264

-

-

... More
5.1 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

8.009

-

-

... More
6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand)

8.36

-

-

... More
13.2 15 mm cement plaster on the rough side of single or half brick wall of mix : 13.2.1 1:4 (1 cement: 4 fine sand)

61.56

-

-

... More
11.6 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 11.6.1 18 mm thick

61.56

-

-

... More
ELECTRICAL WORKS 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. 1.10.1 Group A

226

-

-

... More
1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required 1.14.1 a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

1556

-

-

... More
1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required 1.14.4 b) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

1021

-

-

... More
1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required 1.14.11 c) 4 X 16 sq. mm + 2 X 6 sq. mm earth wire

390

-

-

... More
1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (Extra / spare conduit only – item 1.14 already includes conduit; taken as 10% of 1.5 sq.mm circuit length) 1.21.1 20 mm

136

-

-

... More
1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (Extra / spare conduit only – item 1.14 already includes conduit; taken as 10% of 1.5 sq.mm circuit length) 1.21.3 32 mm

119

-

-

... More
1.27 Supplying and fixing following size/modules, GI Box along with modular base and cover plate for modular switches in recess etc as required. 1.27.3 4 Module (125mmX75mm)

83

-

-

... More
1.27 Supplying and fixing following size/modules, GI Box along with modular base and cover plate for modular switches in recess etc as required. 1.27.4 6 Module (200mmX75mm)

30

-

-

... More
1.27 Supplying and fixing following size/modules, GI Box along with modular base and cover plate for modular switches in recess etc as required. 1.27.6 12 Module (200mmX150mm)

5

-

-

... More
1.24 Supplying and fixing following modular switch/socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. 1.24.1 5/6 A switch

137

-

-

... More
1.24 Supplying and fixing following modular switch/socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. 1.24.3 15/16 A switch

55

-

-

... More
1.24 Supplying and fixing following modular switch/socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. 1.24.4 3 pin 5/6 A socket outlet

137

-

-

... More
1.24 Supplying and fixing following modular switch/socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. 1.24.5 6 pin 15/16 A socket outlet

55

-

-

... More
1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

121

-

-

... More
1.45 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

29

-

-

... More
Bajaj Energon BLDC Ceiling Fan, 1200 mm, 350 RPM

29

-

-

... More
1.35 Installation, testing and commissioning of wall bracket / ceiling fittings of all sizes and shapes containing up to two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

170

-

-

... More
36W Cool White Bajaj LED Panel Square Light, Base Type: 2ft x 2ft

30

-

-

... More
12W Bajaj Ceiling Panel Light

122

-

-

... More
150W Bajaj LED Flood Light

18

-

-

... More
1.50.1 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required – up to 450 mm sweep.

27

-

-

... More
Bajaj Maxima DX-G 02 150 mm Exhaust Fan

27

-

-

... More
Voltas 2 Ton 3 Star Inverter Split AC, Venus Plus

12

-

-

... More
Voltas 1.5 Ton 3 Star Inverter Split AC (indoor + outdoor unit)

13

-

-

... More
AC installation kit per unit (copper piping set, drain pipe, cable, outdoor bracket, labour)

25

-

-

... More
2.3 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2.3.3 12 way, Double door

29

-

-

... More
2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2.10.1 a) Single pole

203

-

-

... More
2.12 Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2.12.1 40 A

29

-

-

... More
2.14 Supplying and fixing following rating, double pole (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2.14.2 40 A

29

-

-

... More
Havells Velora Pro 15 L storage water heater (geyser)

18

-

-

... More
Croma 90 L single-door mini refrigerator

15

-

-

... More
43-inch 4K Smart LED TV

17

-

-

... More
TV wall-mount bracket with fixing

20

-

-

... More
Electric kettle 1.5 L stainless steel

15

-

-

... More
Wall-mounted hotel hair dryer 1600 W

15

-

-

... More
55-inch 4K Smart LED TV (lounge ×2, reception ×1)

3

-

-

... More
Commercial vertical double-door refrigerator, 500 L

1

-

-

... More
Deep freezer 300 L

1

-

-

... More
Microwave oven 30 L convection

1

-

-

... More
Commercial induction cooktop 3.5 kW

2

-

-

... More
Kitchen hood / chimney 90 cm, SS commercial type

1

-

-

... More
Mixer grinder 750 W

1

-

-

... More
Commercial RO + UV water purifier 25 LPH

1

-

-

... More
Hot & cold water dispenser

2

-

-

... More
Front-load washing machine 8 kg

1

-

-

... More
Tumble dryer 7 kg

1

-

-

... More
Steam iron 2000 W

1

-

-

... More
JBL EON712 12-inch 1300 W powered PA speaker

4

-

-

... More
Speaker wall-mount bracket / stand, power & signal cable

4

-

-

... More
Shure SVX24/PG58 wireless handheld microphone system

4

-

-

... More
Shure SM58 wired dynamic microphone

2

-

-

... More
12-channel analog/USB mixer (Yamaha MG12XU)

1

-

-

... More
Mic stands, XLR / speaker cables, connectors and rack (lump sum)

1

-

-

... More
Projector 5000 lumen WUXGA with ceiling mount

1

-

-

... More
Motorised projection screen 120-inch

1

-

-

... More
Supply of 3.5C x 95 sq.mm Al. XLPE armoured 1.1 kV cable (pole → main panel, DG/AMF → main panel, main panel → floor distribution)

90

-

-

... More
Supply of 3.5C x 35 sq.mm Al. XLPE armoured 1.1 kV cable (feeders to meeting hall, kitchen/laundry, staff and common DBs)

120

-

-

... More
7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 7.1.2 Above 35 sq. mm and upto 95 sq. mm

50

-

-

... More
7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 7.1.1 Upto 35 sq. mm

60

-

-

... More
7.7 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. 7.7.2 Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

40

-

-

... More
7.7 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. 7.7.1 Upto 35 sq. mm (clamped with 1mm thick saddle)

60

-

-

... More
9.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 9.1.24 3½ X 95 sq. mm (45mm)

8

-

-

... More
9.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 9.1.21 3½ X 35 sq. mm (32mm)

12

-

-

... More
14.16.2 Supplying and laying of DWC HDPE pipe ISI marked, 90 mm dia (OD-90 mm & ID-76 mm nominal) along with accessories conforming to IS 14930 Part II, direct in ground (75 cm below GL) including excavation and refilling, for protection of underground cable.

40

-

-

... More
14.13 Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep )and re-filling etc as required 14.13.2 a) 80 mm dia

12

-

-

... More
12.38 Supplying and fixing of light class G.I. pipe of 80 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.

1

-

-

... More
6.2 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

4

-

-

... More
6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)

125

-

-

... More
6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)

40

-

-

... More
6.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required

4

-

-

... More
5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

8

-

-

... More
5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required

60

-

-

... More
5.18 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

60

-

-

... More
5.12 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required

24

-

-

... More
6.14 Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required

64

-

-

... More
Supply, installation, testing & commissioning of 100 kVA silent DG set (see MR-1)

1

-

-

... More
Supply of AMF / changeover panel 160 A TPN (see MR-2)

1

-

-

... More
Supply & fixing of exhaust piping with residential silencer (see MR-3)

1

-

-

... More
Supply & fixing of 990 L day fuel tank with piping & fittings (see MR-4)

1

-

-

... More
Supply of 3.5C x 120 sq.mm Al. XLPE armoured cable, 1.1 kV (see MR-5)

30

-

-

... More
7.8.3 Laying & fixing 1 no. PVC/XLPE power cable 1.1 kV, above 95 sq.mm and up to 185 sq.mm (clamped with 25/40x3 mm MS flat clamp) on cable tray

30

-

-

... More
9.1.25 Supplying & making end termination with brass compression gland & Al. lugs, 3½ x 120 sq.mm (45 mm) PVC/XLPE Al. cable 1.1 kV

2

-

-

... More
4.6.4 Supplying & installing perforated HDG cable tray 300 mm x 50 mm x 1.6 mm (galv. not less than 50 micron) with connectors & GI suspenders

10

-

-

... More
5.2 Earthing with GI earth pipe 4.5 m long, 40 mm dia, with accessories, masonry enclosure, cover plate, watering pipe, with charcoal/coke & salt (DG body & neutral)

2

-

-

... More
5.9 Supplying & laying 25 x 5 mm GI strip 0.5 m below ground as strip earth electrode, incl. connections

20

-

-

... More
5.15 Providing & fixing 25 x 5 mm GI strip on surface for earth connections

10

-

-

... More
FIRE FIGHTING Supplying and placing Eco Extinguisher 4 kg Premium ABC dry powder type fire extinguisher, red (stored pressure, IS:15683), complete with wall mounting bracket.

40

-

-

... More
Supplying and placing Agni-X 4.5 kg fire extinguisher, carbon dioxide gas, 131.56 bar testing pressure and 18 sec. discharge time, model PSS-CO2FE-4.5, complete with wall mounting bracket.

20

-

-

... More
BOUNDARY WALL AND GATE Providing Brick Boundary wall with 1.8 m height above G.L. with 112mm thick brick wall with 250mmx250mm R.C.C. post with cement plastering on both sides and tie beam of 250mm x 250mm size including white washing on both sides of the wall surfaces etc etc………………. complete as directed by the Department.

193.5

-

-

... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

660.397

-

-

... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10sqm on plan) including getting out and disposal of excavated earth leadupto 50 m and lift upto 1.5m, as directed by Engineer-in-charge. 2.6.1 All kinds of soil.

4.5

-

-

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)

0.225

-

-

... More
5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.

131.951

-

-

... More
5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers

6.67

-

-

... More
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts

5.4

-

-

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

1.116

-

-

... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

0.338

-

-

... More
15 mm cement plaster on rough side of single or half brick wall of mix: 13.5.1 1:4 (1 cement: 4 coarse sand)

5.88

-

-

... More
Finishing walls with water proofing cement paint of required shade : 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm)

3.72

-

-

... More
Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

5.88

-

-

... More
EARTH FILLING (RAISING LOW SITE) 2.38 Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of Engineer -in - charge.

2159.5

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.