Assam University Tender

Supplying, erection, testing and commissioning of 16 M high mast system with its accessories such as foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates, non-integral LED flood light luminaries with provision for 9 nos 200 W LED lamps and its control gear boxes (Bajaj/ Crompton/ Wipro/ Philips make) provision for twin dome LED aviation obstruction lights (AOL) , control feeder panel housing 63 A TPN MCB incomer, ATS automatic timer switch based on TOD event and geographical data with contactor circuit for the automatic control of luminaries, outgoing terminals and control circuit for the power tool motor. Mast shaft shall be in two sections-plate thickness-Top 3mm, Bottom 4mm,Cross Section of mast: 20 sided polygon, section length: top 8000 mm-bottom 8000 mm, bottom(A/F)410-450 mm,Top(A/F) 150-160 mm, diameter of base plate:540 mm, thickness of base plate: 25 mm, foundation bolts no:8 nos, PCD of foundation bolts:460 mm diameter:M30, length of foundation bolts:850 mm, hot dip galvanised and suitable for wind velocity (50m/s) as per IS 875. It shall also include accessories for high mast including head frame, steel rope 6 mm dia ( 7 / 19 construction) , trailing cable, double drum winch,

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) .

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt.25 KA 415V 50 Hz 4P MCCB (Schneider, legrand, Siemens,L&T make) 100A incommer MCCB with sheet steel enclosure complete.