Indo Tibetan Border Police Tender
... More
The ITBP has issued a formal invitation for competitive bids for the Indo Tibetan Border Police project, for Construction Of Gos Mess At Bhq, 58th Bn Itb Police Force, Roing (ar. P) in Lower Dibang Valley, Arunachal Pradesh, with an estimated contract value of Rs. 29,30,809. The bid opening date for this tender is 09-06-2025 and the last date for bid submission is 30-06-2025. Interested bidders for Indo Tibetan Border Police tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Indo Tibetan Border Police - ITBP Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date9 Jun 2025
Closing Date30 Jun 2025
Tender Amount₹ 29,30,809.29
Costs
EMD
₹ 11,52,788Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_ITBP_863500_1Tender No
No./ITBP/SHQ (DBRG)/Eng./58 Bn/2025-38-43ATender Authority
Indo Tibetan Border Police ViewPurchaser Address
-Website
http://https://www.itbpolice.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil : Pipes, cables etc, not exceeding 80 mm dia.
500
262
-
... More
Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil :Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm
200
669
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.
108.64
238
-
... More
Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.
181.07
853
-
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
143.69
154
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
18
9599
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
273.69
7942
-
... More
Providing and fixing up to floor five level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) .
341.9
17819
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
55.4
913
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. Concrete of M25 grade with minimum cement content of 300 kg /cum.
180
11501
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
334.56
477
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ)
23.61
1129
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
911.96
897
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
269.28
1171
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases
18.54
932
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc., including edges
64.22
1158
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick
1166.44
1253
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
13598.75
131
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
34385.7
131
-
... More
Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand).
269.28
366
-
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
51
95
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level : Concrete of M35 grade with minimum cement content of 370 kg /cum
108.79
11949
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level. Concrete of M25 grade with minimum cement content of 330 kg /Cum
223.37
12014
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level. Concrete of M30 grade with minimum cement content of 350 kg /Cum
78.52
12198
-
... More
Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab over 0.50 sqm
111.97
7235
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm
57.78
6258
-
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work
76.44
363
-
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work
57.78
622
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
16
1192
-
... More
Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
169.75
617
-
... More
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
30
870
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
556.14
1544
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood
2.02
174182
-
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Float glass panes : 4 mm thick glass pane (weight not less than 10kg/sqm).
17.88
2731
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
93.98
3860
-
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
26.78
563
-
... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood
57.96
5912
-
... More
Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed three layer or graded plain wood particle board medium density grade I, ISI marked and conforming to IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete.
6.6
731
-
... More
Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide. Particle board with decorative veneering on both sides
6.6
152
-
... More
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 12 mm dia
6.6
347
-
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
25
1370
-
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm
71
317
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm
71
140
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100x10 mm
71
78
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm
142
80
-
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper
71
88
-
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.
10
1058
-
... More
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type)
50
48
-
... More
Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately)
100
24
-
... More
Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. With decorative veneering on one side and commercial veneering on other side
88.83
2348
-
... More
Plain Gypsum plaster board conforming to IS: 2095 Part -1:2011 (Board with BIS certification marks) 12.5 mm thick
62.4
1594
-
... More
Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for :
(i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R4 series with frame (115mm & above) x (45mm & above) & both glazed and fly screen sash (44mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height above 1.8m)
53.64
15075
-
... More
Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete.
4
281
-
... More
Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately)
150
649
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes
238
251
-
... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
25
268
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
130.8
941
-
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
417.64
748
-
... More
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
84.6
1355
-
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 1200 mm
405.13
1921
-
... More
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 100 mm diameter
50
442
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter
50
459
-
... More
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick flat
64.06
1517
-
... More
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
670.78
418
-
... More
15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand)
1246
481
-
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
1916.78
320
-
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
2005.69
226
-
... More
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)
940.85
142
-
... More
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.
60
12829
-
... More
Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.)
2020
6
-
... More
Making bell mouth opening/ entrance of size 100x50x50 cm for drainage pipe under footpath, including providing cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) for shape of bell mouth, including plastering providing and fixing precast R.C.C./ S.F.R.C. slab including plastering with cement mortar 1:3 (1 cement : 3 fine sand) of 6 mm thickness on exposed surface of the slab & bell mouth including centring, shuttering & neat cement punning inside the bell mouth etc. all complete.
16
3716
-
... More
Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.
81
251
-
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
480
1184
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
12
12328
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
1
8246
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
11
7939
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
15
4825
-
... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
15
2051
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
1
8463
-
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
14
425
-
... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia
8
8457
-
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
3
2009
-
... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.
25
64
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
11
1959
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450 mm dia
2
1802
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape 450x350 mm (outer dimensions)
2
1677
-
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
7
1320
-
... More
Providing and fixing toilet paper holder : C.P. brass
13
979
-
... More
Providing and fixing soil, waste and vent pipes : 100 mm dia
1
1403
-
... More
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : For 100 mm dia pipe
1
442
-
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia
26
729
-
... More
Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm
2
170
-
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet
26
2432
-
... More
Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 100 mm dia
8
869
-
... More
Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms
14
447
-
... More
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
2
18276
-
... More
Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal.
2
22040
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes
300
606
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes
200
655
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 40 mm dia nominal bore
300
751
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore
4
563
-
... More
Providing and fixing gun metal non- return valve of approved quality (screwed end) : 40 mm nominal bore Horizontal
1
1160
-
... More
Providing and fixing gun metal non- return valve of approved quality (screwed end) : 40 mm nominal bore Vertical
4
1382
-
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
15
2427
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
6500
13
-
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore
16
617
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
5
973
-
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore
15
816
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
18
699
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 200 mm diameter S.W. pipe
250
1675
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With Sewer bricks conforming to IS : 4885
10
15489
-
... More
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
2
3521
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
278.03
646
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
15.84
1433
-
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness
4
3440
-
... More
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
22.8
117
-
... More
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Anodized (AC 15 ) aluminium tubular handle bar
4
701
-
... More
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
1
644
-
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
7.2
6489
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
38.88
751
-
... More
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured.
513.41
839
-
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
562.01
2052
-
... More
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
41.07
9799
-
... More
Providing and fixing SS robe hook inspired by bold geometry of the Rubik's cube with necessary screws and making walls good. Suitable for hanging of cloths upto 5 Kg, minimum two hooks on cube.
8
683
-
... More
Providing and fixing SS towel ring with necessary screws and making wall good. The ring should be wall mounted and suitable for hanging of towel/ cloths upto 5 Kg.
12
815
-
... More
Providing and fixing SS soap dish holder with froasted glass and with necessary screws and making wall good. The item should be wall mounted and suitable 150 Gm soap.
12
857
-
... More
Providing and fixing SS liquid soap container (froasted glass container) and with necessary screws and making wall good. The item should be wall mounted and suitable 250 ML soap.
12
963
-
... More
Providing and fixing SS towel rail with necessary screws and making wall good. The item should be wall mounted and suitable for hanging cloths/ towel upto 3 KG.
12
1026
-
... More
Providing and fixing Glass Shelf with necessary screws and making wall good. The item should be wall mounted with a conceled screws and SS railing on front to guard soap or other toiletries items.
15
1871
-
... More
Providing and fixing Towel rack with necessary screws and making wall good. The item should be wall mounted with a conceled screws and suitable for hanging towel/ clothes upto 5 Kg, Minimum 3 Top bars and 1 bottom bar.
8
3401
-
... More
Providing and fixing Wall mixer suitable for hot and cold water flow in foaming form. The item should be wall mounted with a conceled screws.
10
7403
-
... More
Providing and fixing Shower rose (100x225 mm) suitable for hot and cold water flow in foaming form. The item should be wall mounted with a conceled screws.
9
1184
-
... More
Providing and fixing Shower panel suitable for hot and cold water flow in foaming form. The item should be wall mounted with a conceled screws. Minimum 1 overhead shower fixed for telephonic type, with water pressure adjustable manual system.
2
3375
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group A
200
1236
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B
150
1440
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C
150
1787
-
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
25
1903
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
2000
398
-
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
2140
406
-
... More
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
800
654
-
... More
Wiring for submain wiring with following sizes of FRLS PVC insulated, copper conductor, single core cable in recessed, PVC medium duty conduit as required. 2 x 2.5 sqmm with 2.5 sqmm earth wire
1000
449
-
... More
Wiring for submain wiring with following sizes of FRLS PVC insulated, copper conductor, single core cable in recessed, PVC medium duty conduit as required. 2 x 4 sqmm with 4 sqmm earth wire
800
521
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 2 way 5/6 A switch
28
180
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A switch
100
190
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet
272
148
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet
103
240
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet
20
180
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antenna socket outlet
15
180
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Bell push
10
170
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm)
40
363
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 3 Module (100mmX75mm)
40
398
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 4 Module (125mmX75mm)
40
417
-
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
60
885
-
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
50
449
-
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 100 mm dia
100
806
-
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 150 mm dia. R.C.C. pipe
500
882
-
... More
Supply and fixing of following size of PVC conduit alongwith the accessories in recess including cutting the wall and making good the same in case of recessed, conduit as required: 20 mm
50
155
-
... More
Supply and fixing of following size of PVC conduit alongwith the accessories in recess including cutting the wall and making good the same in case of recessed, conduit as required: 25 mm
40
176
-
... More
Supply and fixing of following size of PVC conduit alongwith the accessories in recess including cutting the wall and making good the same in case of recessed, conduit as required: 32 mm
20
252
-
... More
Supply and fixing of following size of PVC conduit alongwith the accessories in recess including cutting the wall and making good the same in case of recessed, conduit as required: 40 mm
12
277
-
... More
Supply and fixing of following size of PVC conduit alongwith the accessories in recess including cutting the wall and making good the same in case of recessed, conduit as required:50 mm
60
346
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm width X 50 mm depth X 1.6 mm thickness
24
815
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness
40
872
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 225 mm width X 50 mm depth X 1.6 mm thickness
10
1090
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 300 mm width X 50 mm depth X 1.6 mm thickness
6
1173
-
... More
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A
10
530
-
... More
Supplying and fixing 5 amps. to 32 amps. Rating, 240/ 415 volts, 50Hz, 10KA 'G' series, miniature circuit breaker (suitable for motor and other inductive loads and conforming to IS 8828: 1996, IEC 60898: 2002) of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
46
311
-
... More
Supplying and fixing 5 amps. to 32 amps. Rating, 240/ 415 volts, 50Hz, 10KA 'G' series, miniature circuit breaker (suitable for motor and other inductive loads and conforming to IS 8828: 1996, IEC 60898: 2002) of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole
13
799
-
... More
Supplying and fixing 5 amps. to 32 amps. Rating, 240/ 415 volts, 50Hz, 10KA 'G' series, miniature circuit breaker (suitable for motor and other inductive loads and conforming to IS 8828: 1996, IEC 60898: 2002) of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple Pole & neutral/4pole
5
1496
-
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A
15
3219
-
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A
10
3316
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) For 6 way, Double door SPN MCBDB
2
2687
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) For 8 way, Double door SPN MCBDB
12
3135
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) For 10 way, Double door SPN MCBDB
5
2820
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) For 14 way, Double door SPN MCBDB
3
3827
-
... More
Supply and installation of blanking plates in all types of DBs.
22
15
-
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
62
175
-
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
120
85
-
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
4
6540
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 35 sq. mm and upto 95 sq. mm
360
493
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 25 sq. mm (28mm)
34
383
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 120 sq. mm (45mm)
4
746
-
... More
Supply, Installation, Testing & Commissioning of following lighting fixtures complete with special electronics low loss ballast / tube / lamp / condenser / starter / louvers / reflector / cover etc. & making connections form light point outlet to the fixture with supply and installation of suitable size of PVC insulated FRLS wire in G.I. flexible pipe (where ever required) etc. complete as required. Note: -Final Selection of light fixtures shall be done by the Architect/Owner. Recessed LED down lighter 12W made of alluminium die cast body, with multiple reflecting angles with anti dazzle reflector and with 60 degree primary reflector fitted with CREE LED 3000 k and with philips non dim driver.
150
1535
-
... More
Supply, Installation, Testing & Commissioning of following lighting fixtures complete with special electronics low loss ballast / tube / lamp / condenser / starter / louvers / reflector / cover etc. & making connections form light point outlet to the fixture with supply and installation of suitable size of PVC insulated FRLS wire in G.I. flexible pipe (where ever required) etc. complete as required. Note: -Final Selection of light fixtures shall be done by the Architect/Owner. Ceiling suspended 12W cylindrical light fixture with multiple reflective angles having anti glare reflector and also fitted with a primary reflector made of anodised aluminium reflector for high light output and fitted with suitable driver
25
4234
-
... More
Supply, Installation, Testing & Commissioning of following lighting fixtures complete with special electronics low loss ballast / tube / lamp / condenser / starter / louvers / reflector / cover etc. & making connections form light point outlet to the fixture with supply and installation of suitable size of PVC insulated FRLS wire in G.I. flexible pipe (where ever required) etc. complete as required. Note: -Final Selection of light fixtures shall be done by the Architect/Owner. Deep recess 18w LED downlighter with high light output diffuser and led suitable for widespread lighting with non dim driver
25
2351
-
... More
Supply, Installation, Testing & Commissioning of following lighting fixtures complete with special electronics low loss ballast / tube / lamp / condenser / starter / louvers / reflector / cover etc. & making connections form light point outlet to the fixture with supply and installation of suitable size of PVC insulated FRLS wire in G.I. flexible pipe (where ever required) etc. complete as required. Note: -Final Selection of light fixtures shall be done by the Architect/Owner. Deep recess12w COB LED down lighter made of die cast aluminium and fitted with highly polished reflector and suitable heat sink with non dim driver.
25
1581
-
... More
Supply, Installation, Testing & Commissioning of following lighting fixtures complete with special electronics low loss ballast / tube / lamp / condenser / starter / louvers / reflector / cover etc. & making connections form light point outlet to the fixture with supply and installation of suitable size of PVC insulated FRLS wire in G.I. flexible pipe (where ever required) etc. complete as required. Note: -Final Selection of light fixtures shall be done by the Architect/Owner. cove light led strip encapsulated with aluminium channel and diffuser cover customised to suit the site requirement as per the actual site measurement
50
419
-
... More
Supply and fixing of Surface LED batten 1x4 Ft made of CRCA housing with high efficiency polycarbonate diffuser, LED Used shall be SMD type and fixture should have minimum efficacy at System level >=100lumens/watt with Minimum system Lumens 4000, Life of fixture: 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 6500K (SDCM<=5) , CRI >80, PF >0.95 & THD<10%, an operating Voltage Range of 140 - 270 VAC.Minimum Internal Surge Protection 2.5KV & ,The fixture design should comply with EMC / EMI compliance with flicker free operations ripple <5%, BIS certification is required for LED Driver & Luminaire, Luminaire manufacture shall provide LM79report from NABL accredited lab & LM80 report issued by LED manufacturer. Similar to Philips BN 021 LED10S- 6500 PSU GR S1 (mirror light)
60
5466
-
... More
Supply, fixing, testing & commisioning 1X70W single piece deep drawn Street light fixture with silverized aluminium housing and clear PMMA diffuser. Suitable to use with Retrofit CFL lamp 07 mtr Pole including 07 mtr Pole with all required accessories.
11
12620
-
... More
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Note : Cost of trays, trenches of excavation will be paid extra under different heads but the rates quoted above will be inclusive of laying, dressing saddling while providing on cable trays, laying, dressing saddling while laying in masonry trenches and laying, dressing, providing sand cushioning and including brick protection while buried directly in ground. 3.5 x 120 sq.mm Al. XLPE Arm. Cable
350
913
-
... More
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Note : Cost of trays, trenches of excavation will be paid extra under different heads but the rates quoted above will be inclusive of laying, dressing saddling while providing on cable trays, laying, dressing saddling while laying in masonry trenches and laying, dressing, providing sand cushioning and including brick protection while buried directly in ground. 3.0 x 25 sq.mm Cu. PVC Arm. cable
150
368
-
... More
Supply & Fixing of key tag outlet mechanical on exisitng M.S. Box and modular Plate complete as required.
12
585
-
... More
Supply & Fixing of Touch Panel type 'DND'/ 'MMR'/'Bell' switches complete with internal/external unit on exisitng M.S. Box as required.
10
612
-
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
50
7952
-
... More
Supply, installation, testing and commissioning of single phase , Fresh Air Fans / Heavy duty Exhaust Fans with all necessary supports All complete with labour and materials as per drawings, specifications and directions of Engineer-in-Charge.. NOTE: Necessary civil works required for fixing the exhaust fans shall be in the scope of Contractor. Fress air fan with louver shutter 300 sweep
12
2471
-
... More
Supplying, Unloading, shifting, Installation at proposed location, testing and commissioning of LT Panel size 4'6"x3'x1' and frame 16 SWG fully powder coated/enamel painted after seven tank treatment. This will be floor mounted/wall mounted, double door, out door duty, dust proof, vermin proof, front operated, electrical panel fabricated as per specifications laid in this document and will be complete with the main and auxiliary bus bars, interconnection, earth bus and will be powder coated finish with 70 micron thickness. The HVAC Panel shall use all MCCB's suitable for 415 V AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. Each incoming breaker will have microprocessor based releases and all outgoing breaker will have minimum electrostatic releases. The Panel will be made as per detailed specifications & drawings forming part of this document. (Each MCCB will be variable current setting from front, with front extended lockable handle, pad lockable in off position, indication light for ON, shrouding on incomer side, termination shall be suitable for aluminium bus bars.)
Incomer:-
A) 1 No 250A TPN feeder each having one no 250A 4P MCCB 38 KA
B) 1 No volt meter with selector switch 3 nos indicating lights
C) 1 No Ampere meter with selector switch, matching CT's.
D) TPN Aluminium bus bar rated for 300A (after considering all necessary deratings) 3 phase 4 wire, 50Hz. A minimum derating factor of 0.66 must be taken for calculation of bus bar sizes. The bus bar size after derating shall be equal to the ampere given in the BOQ The conductivity of bus bar shall not be less than 58% and earth bus size shall be 10% of phase bus bar.
Outgoings:-
A) 10 Nos 63A TPN feeder each having one no. 63A 4P MCCB 38 KA
B) 2 Nos 40A TPN feeder each having one no. 40A 4P MCB 38 KA
C) 2 Nos 32A TPN feeder each having one no. 32A 4P MCB 38 KA
D) Set of suitable load capacitor bank , Other items such as Lot of control wiring, 1 Set of designation plates
1
175188
-
... More
Supplying & installation of following capacity vertical type Geysers ISI 5 Star rating with glassline tank on the existing wall with the help of fastener i/c testing & commissioning, credit the cost of dismantled material etc. complete as required. 25 Ltr
12
15318
-
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
200
66
-
... More
FOUR DOOR REFRGERATOR 500 ltr. Double walled PUF insulated body , the unit to have 4nos doors fitted with gasket. The unit to have 8nos shelves to be fitted on adjustable channel. The unit to have automatic temperature controller. Temperature range shall be between 0-5 degree C.1250X750X2000
1
86832
-
... More
CHEST FREEZER 100 LTRS 1. An upright ultra-low temperature freezer.
2. The instrument should provide precise, ultra-low temperature environments for cold storage
of scientific materials, from -50 °C to -86 °C at 32 °C maximum ambient operating
temperature.
3. The instrument should have two compressors.
4. The minimum capacity of the freezer should be 400 L.
5. There should be five Compartments with four adjustable height SS shelves.
6. Power consumption should be about 525 watts/ 12.60Kwh per day
7. There should be a large LED display.
8. Pull down Time should be around 4 hours.
9. There should be password protection for temp. & alarm set-points.
10. The indicator lamps on the control panel should provide warnings of power loss, system
failure, exceeding High/Low temperature set points, low battery voltage, and filter blockage.
1
18217
-
... More
S.S RACK 5-TIER. Complete s.s construction , shelves to be made of 20swg s.s sheet. The rack to have 5nos shelves to be placed at equal distance. Shelves to be duly welded with s.s vertical pipes with adjustable feet.900X450X1800
2
21116
-
... More
TWO BURNER COOKING RANGE. Top to be made of 16swg 304 grade ss sheet. Frame work to be made of MS angle frame work mounted on s.s vertical pipes with adjustable feet. The unit to have 1nos under shelf. The range to have 2nos pan support of approx size - 15x15 inches. 1100X600X850+150
1
17596
-
... More
EXHAUST HOOD Kitchen Hood With Autoclean Technology, Filterless FOR BURNER. Complete s.s construction. The exhaust to have Filterless Technology including Ducting work , exhaust hood hanging exhaust hood.370 (L) x 600 (W) x 900 (H)
2
20563
-
... More
WORK TABLE WITH 2-UNDERSHELF. Top to be made of 16swg 304 grade s.s sheet. Frame work to be made of duly painted MS angle frame work mounted on s.s vertical pipes with adjustable feet. The table will have 2 nos undershelf . 1950X600X850+150
2
20799
-
... More
WATER COOLER. Double walled insulated body. The tank of water cooler to be made of 304 grade ss sheet. The unit to have 1nos tap. 80 LTRS capacity
1
38746
-
... More
P/F Sofa having flexing-back lounge seating system standing on beam with side frame assemblies. Having Connecting Beam assembly which is a fabricated assembly made by welding MS. square pipe 6.0 cm. x 6.0 cm. x 10 BG. thick. to 0.5cm. thick HR. Steel plate on each side for fixing the moulded side frame assembly. The connecting beam assembly is black powder coated. The seat rest assembly consists of a fabricated inner-frame assembly insitu-moulded with Polyurethane foam having density = 45 +/- 2 Kg./cm3. The hardness of the P.U. foam = 23 - 27 Kgs. on Hampden m/c. for 25% compression of the foam. The complete moulded seat rest assembly is covered with a replaceable fabric upholstery cover. SEAT SIZE: 52.0cm.(W) x 50.0cm.(D) x 6.0cm.(T) Approx. The backrest assembly is flexing type and consists of a fabricated inner-frame assembly insitu-moulded with Polyurethane foam having density = 45 +/- 2 Kg./cm3. The hardness of the P.U. foam = 16 - 20 Kgs. on Hampden m/c. for 25% compression of the foam. (Godrej model petal) The complete moulded backrest assembly is covered with a replaceable fabric upholsterycover BACK SIZE: 52.0cm.(W) x 57.0cm.(H) x 12.0cm.(T) Approx. The side frameassembly, which forms the armrest assembly, is fitted to the two ends of the connecting beam asssy. to form the leg-cum-armrest assembly. It consists of a fabricated inner-frame assembly insitu-moulded with Polyurethane foam having density = 45 +/-2 Kg./cm3. The hardness of the P.U. foam = 16 - 20 Kgs. on Hampden m/c. for 25% compression of the foam. The complete moulded side frame assembly is covered with a replaceable fabric upholstery cover. SIDEFRAME (ARMREST) SIZE: 63.0cm.(D) x 58.0cm.(H) x 12.0cm.(T) Approx. The adjustable glide is injection moulded in black ABS and is used for level adjustment of the sofa on uneven floor surface. It is fitted to the side frame assembly. 3 Seater Sofa
10
70312
-
... More
P/F Sofa having flexing-back lounge seating system standing on beam with side frame assemblies. Having Connecting Beam assembly which is a fabricated assembly made by welding MS. square pipe 6.0 cm. x 6.0 cm. x 10 BG. thick. to 0.5cm. thick HR. Steel plate on each side for fixing the moulded side frame assembly. The connecting beam assembly is black powder coated. The seat rest assembly consists of a fabricated inner-frame assembly insitu-moulded with Polyurethane foam having density = 45 +/- 2 Kg./cm3. The hardness of the P.U. foam = 23 - 27 Kgs. on Hampden m/c. for 25% compression of the foam. The complete moulded seat rest assembly is covered with a replaceable fabric upholstery cover. SEAT SIZE: 52.0cm.(W) x 50.0cm.(D) x 6.0cm.(T) Approx. The backrest assembly is flexing type and consists of a fabricated inner-frame assembly insitu-moulded with Polyurethane foam having density = 45 +/- 2 Kg./cm3. The hardness of the P.U. foam = 16 - 20 Kgs. on Hampden m/c. for 25% compression of the foam. (Godrej model petal) The complete moulded backrest assembly is covered with a replaceable fabric upholsterycover BACK SIZE: 52.0cm.(W) x 57.0cm.(H) x 12.0cm.(T) Approx. The side frameassembly, which forms the armrest assembly, is fitted to the two ends of the connecting beam asssy. to form the leg-cum-armrest assembly. It consists of a fabricated inner-frame assembly insitu-moulded with Polyurethane foam having density = 45 +/-2 Kg./cm3. The hardness of the P.U. foam = 16 - 20 Kgs. on Hampden m/c. for 25% compression of the foam. The complete moulded side frame assembly is covered with a replaceable fabric upholstery cover. SIDEFRAME (ARMREST) SIZE: 63.0cm.(D) x 58.0cm.(H) x 12.0cm.(T) Approx. The adjustable glide is injection moulded in black ABS and is used for level adjustment of the sofa on uneven floor surface. It is fitted to the side frame assembly. 2 Seater Sofa
16
55531
-
... More
P/F CHAIRS (for study tables) having the seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric and moulded Polyurethane foam, together with moulded seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. Back Size45.0 cm.(W) x 53.0 cm.(H) Seat Size 52.0 cm.(W) x 48.0 cm.(D). The Polyurethane foam is moulded with density = 45 +/- 2 kg/m3 and Hardness = 20 +/- 2 kg. on Hampden machine at 25% compression the seat & back cover is injection moulded in black Co-polymer Polypropylene. The one-piece armrests are made of black integral skin polyurethane with 50-70 Shore ‘A’ hardness and reinforced with M.S. insert. The armrests are scratch and weather resistant. The armrests are fitted to the seat with powder-coated armrest brackets made of 0.5cm. thk. HR steel. The adjustable tilting mechanism is designed with the following features:
Forward tilt, Self-regulating tilt tension + Manual override.4-position tilt- locking with anti-shock back mechanism, which prevents the backrest from impacting the user when the lock is released. Provision for fitting Drop-lift mechanism. A full 3600 swivel mechanism allows fluid lateral movement. The backrest is locking with anti-shock back mechanism, which prevents the backrest from impacting the user when the lock is released connected to the mechanism with a drop-lift mechanism, which can be adjusted in the range of 7.0 cm and locked in 7 positions for the better lumbar support. The pneumatic height adjustment is maintenance free, has an adjustment stroke of 10.0 cm. The bellow is 3 piece telescopic type and is injection moulded in black Polypropylene. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5nos. twin wheel castors. The pedestal is 60.0cm. pitch-centre dia. (70.0 cm with castors). (shop drawings to be given by the contractor and design to be approved by architect.)
10
6510
-
... More
P/F Stackable chairs of prefered Medium Back Chair ,Tilting Mechanisum. Adjustable Arms With Pu Pad , Nylon Base ,Net/Fabric Upholstery,Gas Lift.
2
8270
-
... More
Dining table Size with chair: 8'6" x 4'6" x 2'6" ht. as per design with round edges of all 4 corners, Table top to be made of 12mm thick toughened glass supported on SS studs attached to base frames, base of the table finished in 4mm veneer of approved shade, Table to be constructed in hardwood framework with necessary provisions. Finished in veneer as/design and detail. All visible surfaces to be finished in same veneer other internal areas of Table to be finished in 1mm laminate of approved shade with 2"x 2” European/German Steamed Beech Moulding on all edges sides and polished with Melamine polish. with 6 no. chairs made out of 1.2 cm. thick hot-pressed plywood, upholstered with fabric and moulded Polyurethane foam, together with moulded seat and back covers. (shop drawings to be given by the contractor and design to be approved by Engineer-in-charge) 6 seater Dining Table (8'6"x4'6"x2'6")
9
261412
-
... More
CENTER TABLE Providing and fixing of centre table of dimension 550 mm L X 550mm D X 450mm H .Table with top made of 10mm thick toughned glass fixed using the studs. With base legs made of pre-laminated particle board. The above furniture should be as per specification and sample approved by client. (Shop drawings to be given by the contractor and design to be approved by Engineer-in-charge)
7
14341
-
... More
BUILT IN FURNITURE. P/F BED of 25mm thick Particle Board, Footboard & Side runner back and front to be cushioned with high class fabric of approved make and All other structure made by Including framework, 25X25mm MS angle @ 500mm C/C @ Top & bottom, 25X25mm thick TW member for support, 19+19mm thick marine plywood @ top & 12mm thick marine plywood @ sides finished with 4mm thick veneer with melamine polish/imported Melamine coating, 12mm thick marine plywood finished with 1mm thick laminate, 25mm thick Melamine foam finished with approved leatherette, 25X25mm MS cleat etc. complete as per drawing. (Basic rate of Veneer of Rs. 2000/-Sq.mt.) (shop drawings to be given by the contractor and design to be approved by architect.) The bed to have recessed kick plates or raised and Mattress of thickness 6". Basic cost of fabric – Rs.500/- per r.ft. (complete to the satisfaction of Engineer-in-charge) SIZE- 6'0" x 6'6" x 2'6" (standard king size beds)
8
54456
-
... More
P/F SIDE TABLE Providing and supplying table made up of 19/12mm thick marine plywood, 4mm thick veneer finished top with melamine polish/imported Melamine coating including supports, drawers etc. complete as directed of approved shape & design as per drawing. all as directed. Bed side table with drawer - 450X500X135mm high fixed on bed headboard- 12mm thick marine plywood @ top, bottom & sides finished with 4mm thick veneer with melamine polish/imported Melamine coating, Drawer with 12mm thick marineplywood @ bottom & sides internal finished with approved 1mm thick laminate. etc. complete as per drawing. (Basic rate of Veneer of Rs. 2000/- Sq.mt.) (Shop drawings to be given by the contractor and design to be approved by Engineer-in-charge)
20
9779
-
... More
P/F STUDY TABLE Providing and supplying table made up of 19/12mm thick Particle board marine plywood, 4mm thick veneer finished top with imported Melamine coating including supports, drawers etc. complete as directed of approved shape & design as per drawing. all as directed. Study desk with drawer - 900X600X750mm with 19mm thick marine plywood @ top, bottom & sides finished with 4mm thick veneer with melamine polish/imported Melamine coating, Drawer with 12mm thick marine plywood @ bottom & sides internal finished with approved 1mm thick laminate. etc. complete as per drawing. (Basic rate of Veneer of Rs. 2000/-Sq.mt.) (Shop drawings to be given by the contractor and design to be approved by Engineer-in-charge)
10
12243
-
... More
P/F telephone table of size: 2'0"x2'0"x2'6". All structure made by 18mm Postlaminated commercial Ply MR Grade with 4 mm veneer (Duro Group-B) on all exposed faces with melamine polish and all internal faces to be pasted with 1 mm thk. laminate of approved shade with telescopic sliding. All exposed edge are covered with Rehau PVC edge banding. (shop drawings to be given by the contractor and design to be approved by Engineer-in-charge.)
10
13475
-
... More
Providing & Fixing of Wardrobe in All structure made by 18mm Postlaminated commercial MDF with 12mm back plywood, and 4 mm veneer on exposed faces with melamine polish, 2"x2" moulding on edges with Melamine polish with Single lock Independent type with shelves as per design, including hanging rod of specified make with minimum a set of 6 no. hangers in each storage unit. Internal faces of storages to be finished with 1 mm thick laminate. (shop drawings to be given by the contractor and design to be approved by architect.). Note: The rate to be inclusive of LED light with Automatic Magnetic Sensor Drawer Closet Wardrobe LED light White Lamp Powered By : 3 x AG13Button Cell, 1 no. to be installed in each wardrobe including all taxes and providing & fixing charges in this item only. (Shop drawings to be given by the contractor and design to be approved by Engineer-in-charge)
45
23072
-
... More
Providing LED TV Cabinet minimum size 2’-9"x3'-0"(ht.) x1'-9" depth made up of 19mm thick. MDF board finished in 4mm veneer of approved shade and texture on all sides (inside as well as outside) melamine matte polished to approved shade. The Cabinet shall have 2 drawers and one shuttered portion with locks etc. all complete as per the details drawing provided. The base of the TV unit shall have S.S. hollow pipes 38mm diameter (2mm thk.) of height 3” with base of nylon shoes .The drawers and cabinet shutters shall have telescopic channels and hinges of Kich/Aarch make. The handles shall be of brushed S.S. finish (shall be as / approval by NIB)The finished product shall be delivered to the Institute Guest House duly covered with bubble sheet to avoid any breakage etc. However in case of any minor repair arising out of transportation etc. the same shall be repaired/replaced immediately by the supplier without any extra cost.(Shop drawings to be given by the contractor and design to be approved by Engineer-in-charge)
10
49420
-
... More
P/F magazine rack in Reception (800 x 1800mm) made of '12mm thk clear imported Acrylic sheet'. Rate to include 12mm thk clear acrylic base sheet with magazine shelves made of 6mm thk acrylic finished with SS studs on wall / partition. Refer detail drawing of magazine rack. complete to the satisfaction of Engineer-in-charge
2
36671
-
... More
P/F Dressing Table with Mirror in Bedroom (size 1'- 0"x 2'8" to 3'0") fabricated out of Particle board (19mm) complete with drawers & top finished with 19mm thk..Pre-polished Italian Granite Stone on table top with half round edge of rate not less than Rs. 4500/-per SqM. (shop drawings to be given by the contractor and design to be approved by Engineer-in-charge)
10
38795
-
... More
P/F shoe rack unit of size 1'6" depth x 4'0" length x 3'0" height fabricated out of Particle Board board (19mm) complete with drawers & top finished with 19mm thk board. with 4 mm veneer on all exposed faces finished with Melamine polish and 2"x2" European/ Germansteamed beech edge mouldings. All mouldings to be Melamine polished. (Shop drawings to be given by the contractor and design to be approved by Engineer-in-charge.)
10
25087
-
... More
Providing and fixing in position New Reception counters as per design made with overall length of 8'-6" to 9'-0" (2591 mm to 2743mm ) and width of 762mm. The counter to have multiple heights with customer height being 1065 mm, reception working top at 762mm and intermediate storage box to be at 915mm as per details. The counter to have provision for 2 occupants. The item includes one drawer unit per occupant with 2 drawers and 1 shuttered storage. Drawers to be made from 12mm comm ply with 19mm com board facade. The drawers and storage along with the inside of tables to be finished with 0.8mm laminate from inside. The work top at 762mm to be finished with 18mm Solid Acrylic surface with moulding on leading edge. The customer top & front to have 12mm solid acrylic surface finish of approved colour (DuPont-Corian make) pasted and shaped with thermoforming over 19mm comm board as per details. The outer area of table to be finished in combination of SS perforated sheet of approved design and 6 mm thk Lacquered glass of approved shade and design. The item includes one key board tray running on telescopic channel , 1 CMelamine trolley, 1 foot rest per occupant. Item includes all hardware such as Self closing hinges, telescopic channels, locks, SS handles etc. complete to the satisfaction of Engineer-in-charge
1
109217
-
... More
Providing and supplying Round table made up of 19/12mm thick Particle board marine plywood, 4mm thick veneer finished top with imported Melamine coating including supports etc. complete as directed of approved shape & design as per drawing. all as directed. Tea Table -750 dia 750mm ht . (Basic rate of Veneer of Rs. 2000/-Sq.mt.) in veneer finish.(Shop drawings to be given by the contractor and design to be approved by Engineer-in-charge)
8
11630
-
... More
Providing & supplying of Room Chair ,1"14 Gauge Chrome Platted Pipe, Leatherette Upholstery. (complete to the satisfaction of Engineer-in-charge)
18
13774
-
... More
Bar Counter- Providing and supplying over All Size Of Bar Table 4000W x 600D x 1050H MM . Upper Table Top 25mm BWP plywood . Understructure Made Of Prime Quality CRCA 50x50mm Square Metal Pipe Duly Powder Coated. Table Top Wooden Panels Flat Edge Duly Sealed With 2mm Thick Pvc Beading . Understructure CRCA Metal Pipe 50X50mm With 1.2mm Thick Four Side Welded With Vertically Metal Pipe.Legs Of The Table Hard Rubber Shoes . All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations . CO2 Welding Shall Be Used . Horizontally Metal Base Supported Leg 25x25mm 1.2mm Thick Powder Coated . Understructure Of Cafe Table Metallic Parts Powder Coated . All Metal Shall Be Coated . After Being Treated With At Least Three Stages Cleaned From Oil , Grease , Dust And Other Dirt Using Special Thermal Control Coating For metal Furniture To Form a Layer Of Base Coating Of (iron\ phosphating ) (0.4 – 0.8) gm/m². Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process. Thickness Of Coating (60 – 80) Micron. (Shop drawings to be given by the contractor and design to be approved by Engineer-in-charge and complete to the satisfaction of Engineer-in-charge)
1
268740
-
... More
Bar Stool made of cherry wood with upholstered seat and back, in leather or fabric. Upon request steel footrest. Bar stools are the tallest types of stool and have seat heights between 29”-32” (74-81 cm). Bar height stools should be used for bar counter heights between 40”-42” (102-107 cm). (Shop drawings to be given by the contractor and design to be approved by Engineer-in-charge)
4
15938
-
... More
Providing and Fixing curtain Rod of stainless steel & stainless steel pipe of 25 mm diameter 1.25 mm thickness of best quality including studs and knobs as per reqmt (per window) for doors and window (Sample to be approved by Engineer - in - Charge)
83
617
-
... More
Providing and Fixing Set of 1 Curtain for a window of 1.2 mt x 2.1 mt, made with curtain cloth of good quality not less than 1.1 mt wide with
a) Top belt of 100 mm width with inbuilt metallic ring 150 mm c/c Distance
b) Bottom 150 mm Fold
c) Providing Cotton liner cloth of good quality at the back of curtain by stitching to curtain.
d) Size of curtains will be 1.4mt x 1.85 mt. (Sample to be approved by Engineer - in - Charge)
100
1331
-
... More
Providing, Fixing, Supplying & installation of 55" LED TV screen with USB Ports, 4 HDMI Ports, Ethernet Port, PC Input VGA Port with 2 Speakers, minimum 50 W Output, Dolby Digital sound. Preferred Make: Sony Bravia KDL-50W800D 126cm (50 inches) Full HD 3D Android LED TV. (For1 no. VIP room & flat 103 drawing room). Note: Cost to include Providing, drawing, connecting and testing of Television cable, Electrolytic grade solid annealed high conductivity copper conductor, gas injected physical polyethylene foam insulated, wrapped with aluminium tape and aluminium alloy wire braided, jelly flooded and PVC jacketing in black colour (Compatible to DTHTV signal), in 25 mm MS/PVC conduit from television outlet box to the junction box /splitter / subscribe rord welling unit/ Dish antenna as required.
1
88926
-
... More
Providing, Fixing, Supplying & installation of 32" LED TV screen with USB Ports, 4 HDMI Ports, Ethernet Port, PC Input VGA Port with 2 Speakers, minimum 20 W Output, Dolby Digital sound.Preferred make: Sony BRAVIA Sony Bravia KLV-40R562C 101.6 cm (40 inches) Full HD LED TV. (For 5 no. bed rooms.)
Note: Cost to include Providing, drawing, connecting and testing of Television cable, Electrolytic grade solid annealed high conductivity copper conductor, gas injected physical polyethylene foam insulated, wrapped with aluminium tape and aluminium alloy wire braided, jelly flooded and PVC jacketing in black colour (Compatible to DTHTV signal), in 25 mm MS/PVC conduit from television outlet box to the junction box /splitter / subscribe rord welling unit/ Dish antenna as required.
10
33201
-
... More
Supplying, installation, testing & commission of 1.00 TR Inverter Split A/C, can work at 60 °C ambient temperature, Nano Silver Green Anti-Bacterial Coating on the evaporator coil kills most bacteria, fungi, molds, spores and other microbes thus providing only pure and cool air with high wall mounted unit Copper Condenser, corrosion resistance coating & with a Duo Rotary Compressor which ensures faster and efficient cooling with minimum fluctuations, vibrations and noise, than conventional compressors Only. [ 5 Star rating]
2
51009
-
... More
Supplying, installation, testing & commission of 1.50 TR Inverter Split A/C, can work at 60 °C ambient temperature, Nano Silver Green Anti-Bacterial Coating on the evaporator coil kills most bacteria, fungi, molds, spores and other microbes thus providing only pure and cool air with high wall mounted unit Copper Condenser, corrosion resistance coating & with a Duo Rotary Compressor which ensures faster and efficient cooling with minimum fluctuations, vibrations and noise, than conventional compressors Only. [ 5 Star rating]
18
62529
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%