Transmission Corporation Of Andhra Pradesh Limited Tender

GST 18%

Supply and Laying of P.V.C casing and caping of Any ISI make (such as Precision/ VIP / Modi/ Gold Medal / Million plast / GM / Sudhakar / Polyline/ Orbit/ Anchor make) with double locking arrangments with groover trunking of size not below 12mm height for the following sizes with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete. 25mm x 12 mm height

Supply and fixing of 48" (1200mm) Sweep star rated ceiling fan with double ball bearings air delivery more than 200Cum/Min of makes: Crompton HS Plus / Havells ES PLUS/ Orient Energy Star/ Halonix (Zephyr)/ Polycab (Synergy 50 ISI) / G.M. (Air Wave Premium)/ Bajaj - Edge/ Arcline (Glacier) models with suitable down rod covered with flexible pipe, 2 module modular type electronic Stepped type fan regulator ( Legrand Lyncus / Havells Coral or Fabio / L&T/ HPL/ Schneider Livia/ GM-(G NINE/ GX) C&S/ Goldmedal (Curve/Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90series/ Precision/ Koncept (Samrat/ Qura)/ Polycab (Levana / IndoAsian/ Pointer/ CPL/ Kolors/ Vihan/ Hosper/ imal/ DEC(Unicus)/ Fybros/ Infinity make) with all standard accessories including cost of all fittings and fixtures, labour for fixing at all positions of building giving electrical connections with necessary tools complete as directed by the Engineer in charge for finished item of work.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) (Fe 415 grade as per IS 1786-1979) of TISCO/ SAIL/ VSP make, different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work For SWITCH YARD WORKS

Plastering with CM (1:5), 12 mm thick to the even wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts , scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work.

Earthwork excavation in all types of soils (up to stone matrix)which can be excavated with pick axe and crow bars and do not require blasting in all conditions such as dry, wet and slushy etc. covering initial lead and lift etc and backfilling the foundations (after laying foundations) with excavated earth complete as per the the directions of the Engineer in charge for the finished item of work.

Laying of Cement Concrete (1:4:8) mix using 50% of 40mm size and 50% of 20mm HBG machine crushed metal for bed flooring including cost and conveyance of all materials at all leads and lifts, ramming, consolidating, curing etc,complete. for finished item of work as per directions of the Engineer-in-charge.

Supply and fixing of polished Black Kadapa Slabs of all sizes between 25- 30mm thickness for cup boards including cost and conveyance of all materials, all leads and lifts complete as per the directions of the Engineer in charge for the finished item of work.

Supply and fixing of 20W, not less than 1100mm length LED batten light and all standard accessories of makes Wipro / G.E. / Phillips / Crompton / Bajaj/ Havells/ HPL/ Halonix on ceiling or wall with all accessories including giving connections, all labour charges and cost of materials etc. complete as directed by the Engineer in charge for the finished item of work.

Painting to new walls with 2 coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finihsed item of work as per SS911 EXTERNAL WALLS.

Wiring with 2 runs of 1.5 Sqmm ISI marked FRSLS/ FRLS-H/ HFFR/ ZHFR PVC insulated flexible copper cables 1100V grade as per IS:694/ 1990 & IS: 17048/ 2018 specifiation for copper cable of Makes: Finolex / RR kabel / Havells/ Finecab/ KEI/ Polycab/ Gloster/ Goldmedal/ GM/ Fortune Arrt/ Anchor/ Million/ APAR(Anushakthi) in existing conduit pipe of 20/25mm dia 1.5mm thick, with 6A/10A 1 way 1 Module Modular switch of makes Legrand (Mylinc)/ Crabtree Verona / Lauritz Knudsen (Formerly L&T)/ HPL/ SchneiderLivia/ GM- (G NINE/ GX) C&S/ Goldmedal (Curve/ Air) / Million Mway / Logus Platina/ Panasonic Vision / Salzer S90 series/ Precision( Series 5)/ Koncept (Samrat/ Qura)/ / Polycab (Levana / IndoAsian/ Pointer/ CPL/Kolors/ Vihan/ Hosper/ Vimal/ DEC (Unicus)/ Fybros/ Infinity/ Elleys (e-soft) , and 3 plate Ceiling Rose of makes: GMG Home/ Gold Medal Olive/ Million Zoom/ Greatwhite Omega/ Koncept/ Vimalopel/ Anchor/ Vihan/ CPL/ Havells Reo/ Elleys with modular cover frame covering to hot dipped galvanized 20/18SWG module switch board including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. FOR SUNSHADES (0.60 M X (0.075M avg thick) X1M Ground Floor (Steel Centering)

Construction of RR Masonry in CM (1:6) using hard CRS, rough granite stone and bond stones (0.16 cum) including cost and conveyance of all materials., labour charges, water lead , Curing, all leads and lifts etc., complete for finished item of work as per directions of the Engineer-in-charge.

RCC M- 20 Nominal mix (Cement 400 kgs ) using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing and steel centering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (Sand 0.45 cum and Metal 0.90 cum) as directed by the Engineer in charge for finished item of work. FOR LINTELS with steel scaffolding GROUND FLOOR

Levelling by filling with borrowed gravel by mechanical means including cost & conveyance of gravel, depositing the soils in filling areas , spreading soils, breaking clods, sectioning and consolidation with three wheel 8 to 10 MT static Road Roller @ OMC to meet requirement as per standard specification , including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per (Payment will be made based on level for finished item of work).

Flooring plastering with CM (1:3) 12mm thick and finishing smooth to the required slope and thread lining for flooring including cost & conveyance of all materials, labour charges, leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work.

Brick Masonry in CM (1:6) with Common burnt clay Bricks of class as per Table-1 of IS:1077- 1992 Non-Modular or traditional size 23 x 11 x 7 cms of approved quality, including cost & conveyance of all materials, labour charges, scaffolding charges at all leads, lifts and curing complete as per the directions of the Engineer in charge for the finished item of work-after 1.20m height

Laying of Cement Concrete (1:4:8) mix using 40mm size HBG Machine crushed metal for foundations including cost and conveyance of all materials at all leads and lifts, ramming, consolidating, curing etc,complete. for finished item of work as per directions of the Engineer-in-charge.

Plastering with CM (1:5), 20 mm thick to the Uneven wall surfaces including cost & conveyance of all materials, labour charges, leads, lifts, Scaffolding and curing complete as per the directions of the Engineer in charge for the finished item of work.

Supply and fixing in position M.S. grills/Angles/gates of required size of approved design and quality. (for, gates, windows, hand railing in front of portico, retaining walls ,) and painting with two coats of synthetic enamel paint of approved quality, make, colour and shade over one coat of red oxide, complete as per the directions of the Engineer in charge for the finished item of work.

Painting to new walls with 2 coats of acrylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a base coat of appropriate cement primer of approved brand and shade making 3 COATS in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and ocnveyance of all materials to work site and all operations , incidental, labour charges etc complete for finished item of work as per SS911 INTERNAL WALLS.