Tirumala Tirupati Devasthanams Tender

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc.

- do - For Pedestals

Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, GI fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc.

- do - 110 mm dia Plain Bend 87.5 Degrees

- do - For VCC Vertical walls of plane surface (rate is for both sides centering) including open drains. Note: The centering charges is for both the faces of the respective numbers. The measurement of centering charges shall be in “Sqm” for one face only and the centering charges given are for two faces of centering.

Manufacture, supply and delivery of (DWC) 200 mm Inner dia. Stiffness Class SN-8 structured wall polyethylene/ polypropylene piping system with nonsmooth external annular corrugated and smooth internal surface (Double Wall) for nonpressure sewage and drainage application pipes of standard length 6 m, grade conforming to IS 16098 (part-II: 2013) including transportation etc., complete as directed during execution.

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness (Total Coated Thickness-TCT), Coating: Alu-Zinc coating AZ150 GSM. Tensile strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc.,complete as directed during execution (Original coil shall be of make TATA Blue scope/ JSW)

Supply and fixing CP Long body bib cock fancy type deluxe heavy duty 12.70 mm dia Indian make 400 grams

- do - 75 mm dia Coupler

Laying of 200 mm Inner dia. Stiffness Class SN-8 structured wall (external annular corrugated & smooth internal surface) Polythelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth & alignment including installation and jointing of the same with the help of coupler (on line/ off line) attached to one end of the pipe & sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc. complete as per drawing, specifications & detail engineering, including carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of Engineer-in-charge. (Payment to be made on the basis of actual finished length of pipe line).

Demolishing and disposal of unserviceable materials within 100 meters lead - Uunreinforced cement concrete up to 15 cm thickness

- do - 75 mm dia. Single socket Pipe

- do - 110 mm dia. Single socket Pipe

Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars below 36 mm dia of Fe 500/ Fe 500D/ Fe 550 (as per IS 1786 - 2008) of different diametres for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire, 2 Nos of 20G binding wire in tandem are to be strictly adhered). Note: Unless otherwise fabrication and placement of steel, no pre-pament shall be made against the supply of steel reinforcement

Supply and fixing of Cement Bonded Particle Board (IS 14276) box type cup board using Cement Bonded Particle Board for making frame of size 100mm x 35mm using two sandwiched 16 mm boards, one Cement Bonded Particle Board and one Cement Bonded Pre-Laminated Particle Boards with plain 35 mm wood lipping. The shutters are made of 16 mm thick Cement Bonded Pre-Laminated Particle Boards (Pre-Laminated Cement Bonded Particle Board) of approved shade inclusive of hardware like MS Powder coated Piano hinges of size ¾” x ¾” , Aluminum powder coated handles of size 4” (101.6mm), Aluminum tower bolt 4” (101.60 mm) Godrej locks, screws, wood lipping and fevicol etc., complete finish item of work

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Construction of Brick Masonry in CM (1:5) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm) including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Supply and placing of M20 Design Mix using of 10 mm HBG crushed metal 0.80 cu.m, sand 0.40 cu.m and cement 350 Kg with water cement ratio of 0.53 (185.50 ltrs/ cu.m of CC) etc., from any source confirming to relevant ISI standard including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete with minimum cement content as per IS code from standard suppliers approved by the department but excluding cost of steel and its fabrication charges, including centering charges, shuttering charges for finished item of work (APSS No. 402) - For 50 mm thick precast slabs.

- do - 110 mm dia Coupler

Manufacture as per BIS:12592 (Part 1&2), supply and delivery of pre-cast concrete heavy duty -10 with 560 mm dia. clear opening manhole covers and frames with ISI marking including, loading, transportation, un-loading and stacking at site, all incidental charges etc., complete.

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work - Ordinary soil - Manual means up to 3m depth

- do - 110 mm dia Door Bend 87.5 Degrees

- do - 110 mm dia Vent Cowl

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 meters lead - For Brick work

Supplying and fixing in position MS Ornamental grills for windows and ventilators or for veranda openings using MS Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with two coats with Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a primary coat (Red oxide metal primer) (total three (3) coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Flooring with chequered cement concrete heavy duty tiles confirming to IS:13801 using aggregates, cement, pigments of size 300 X 300 x 25 mm of any shade set over base coat of CM (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & jointed with neat cement to full depth mixed with pigment of matching shade including cost & conveyance of all materials, etc., complete for finished item of work.

Plastering in CM (1:5) 12 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete.

Conveyance charges for machinary for transporting of earth/ sand/ gravel etc. up to 5 kM by tippers/ trucks, including loading, unloading and idle hire charges, inlcuding all incidental charges as specified by the Engineer-in- Charge

Supplying and fixing in position MS Tubes & pipes of all diameters as per lS-1161 of approved size design including labour charges for necessary cuttings, bending, welding, fabrication, grinding and finishing smooth, labour charges for fixing in position, including making holes in RCC or brick walls, making the same good the same after fixing, painting the same with Two coats with Synthetic enamel paint in all shades grade - I having VOC (Volatile Organic Compound) content less than 50 grams / liter approved make and colour over a Primary coat (Red oxide metal primer) (total three coats) including cost and conveyance of all materials, incidental charges etc., complete.

- do - 160 mm dia. Double socket Pipe

- do - 22.20 mm ODPipe - SDR 13.5

- do - 28.60 mm ODPipe - SDR 13.5

Supply and fixing 12.70 mm NP stop cock Indian make heavy duty (400 Grms)

Cement Concrete (1:2.5:5) - Grade M15 using 20 mm (0.54 Cum) and 12 mm (0.36 Cum) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing,machine mixing, cost and conveyance of all materials etc., complete.

Supply of Glass panes - Plain Float Glass 12 mm thick

Plastering in CM (1:5) 20 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete.

Flooring with Antiskid floor tiles 1st quality of all series & shades (as per manufacture specification), set over base coat of CM (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including white cement slurry of honey like consistency spread @ 3.30 kgs per sq.m. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply) - Supply of Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs

Supply and fixing 12.70 mm NP two way Angle cock Indian make heavy duty