Tirumala Tirupati Devasthanams Tender

civil work;Cement Concrete (1:4:8) grade using 20 mm ( 0.54 Cum) and 12 mm (0.36Cum) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, machine mixing cost and conveyance of all materials etc., complete.

civil work;Cement Concrete (1:3:6) using 20 mm ( 0.54 Cum) and 12 mm (0.36Cum) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including cantering, curing, machine mixing cost and conveyance of all materials etc., complete.

civil work;Construction of Granular sub base by providing coarse graded material (Table 400 -2) including conveyance,seignorage,spreading in uniform layers with motor grader 110 HP on prepared surface, mixing materials by mix in place method with rotavator at OMC including cost of watering and compacting with vibratory roller 8-10 tonnes capacity to achieve desired density etc. complete as per technical specifications vide clause n0 401 of MORTH (4th revision) and as directed by the Engineer - in - charge

civil work;Providing, laying, spreading and compacting graded stone aggregate (IRC size HBG crushed stone aggregate confirming to Table 400-12 & Table 400-13) to Wet mix Macadam specification including premixing the material with water at OMC in Mechanical mixer, carriage of mixed material by Tipper to site, laying in uniform layers in sub-base and /base course on a well prepared sub-base and compacting with Vibratory roller 8-10 Tonnes weight to achieve desired density including lighting, barricading and maintenance of diversion etc., as per Technical specification vide clause No.406 of MORTH (5th Revision) etc., complete in all respects and as directed by Engineer-in-charge during execution. - do - for thickness of more than 100mm using vibratory roller.

civil work;Providing and fixing precast concrete blocks (interlocking pavers) using not less than M40 grade paver blocks and thickness not less than 80 mm for medium traffic areas conforming to IS 15658-2006 of all shapes and designs as per the specification, over sand bed of 20 mm to 40 mm (30 mm average) thickness and compacting with vibrating plate compactor having 3 tonne compaction force there by forcing part of sand underneath to come up in between joints. final compaction of paver surface to be done after spreading and brushing the fine sand into joints to its final level. The work includes cost of all materials such as interlocking pavers, sand etc., Labour and equipment's such as cutting machine, lift, loading & unloading to work site clearing, bringing required all materials for the successful completion of work as per drawings and Technical Specification Clause 1504 MORD and as directed during execution by the Engineer-in- charge of the work.

civil work;Centering and scofolding charges for VCC vertical walls on plain surface (Rate is for both sides centering) including open drains.

civil work;Plastering in cement mortar (1:3) 12mm thick using best river sand from approved source including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete.

civil work;-do- in first floor

civil work;Painting two coats for new plastered surface with Ready mixed Synthetic Enamel paint of approved colour and make in all shades grade-I having VOC (Volatile Organic compound) content less than 50 grams / litre over one coat of cement primer of exterior grade -2 including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.