Sri Padmavati Mahila Visvavidyalayam Tender

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply Installation Testing And commissioning of DG Set complete with 1500 RPM Diesel Engine of suitableBHP & AC Brush less SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled. Alternator: It shall be self regulated, self excited and confirms to IS: 13364/1992 or latest version with regulation of +5% from No load to full load, IP23, with standard Alternator Protection( Over voltage, over speed & under voltage). DieselEngine: Itshall have residential silencer, up to 10 M exhaust piping , electronic / Mechanical governor, Manual & electric Start, Batteries, Fuel tank & piping, control panel (16 G) with SPN(For 5 KVA)/TPN MCCB of required rating (25/36/50 KA) with PLC based Engine controller supplied by OEM, Ammeter, Voltmeter, Frequency Meter or Multi function meter, Energy Meter & Hour Meter, Engine instruments panel,AVM and Automatic Voltage Regulator. The diesel engine shall be capable of providing 10% over load for 1 Hr for every 11 Hrs of continuious running at full load.The DG set shall be supplied with initial filling of fuel,lube oil, coolant oil as per OEM specifications and shall be tested at site. Accoustic Enclosure: Weatherproof, powder coated Accoustic enclosure for DG set for sound attenuation fabricated from 1.6 mm CRCA sheet steel (structure) with side wall fabricated from 1.6 mm CRCA sheet and filled with foam as per CPCB norms latest amendments & IS 8183 .The doors are fabricated from 1.6 mm CRCA sheet packed with accoustic material, floor of MS chequrred plate 5.0 mmthick, All doors/ opening are sealed with neoprene/ EPDN gaskets. The DG Set shall be maintained for two years after commissioning by the supplier including regular servicing, cost of consumables etc complete as specified by the OEM along with warranty for two yearsThe enclosure has built in fuel tank, residential silencer (isolated from main DG chamber) with protection and tripping of DG set against temperature of more than 50 °C. All controls for operation of DG set are from outside the enclosure with DG control panel having processor based genset monitoring and control system MCCB/ACB Ammeter, voltmeter, Pf meter, frequency meter, KWH meter, Ind. Lamps etc. mounted inside enclosure , visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator.Noise level is less than 75 db (A) at a distance of 1 Mtrs as per CPCB-II norms,complete in all respect of following capacity : 320 kVA at 0.8 pf 415V 50Hz 3-Ø Engine Makes : Caterpillar/Cummins/Koel Green/Mahindra/Elmot power Gen/Ashok Leyland/Greaves. Alternator Make:Leroy somer/Crompton Greaves/Stamford

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;RCC M- 20 Design mix using 20mm HBG crushed metal 0.480 cu.m , 10mm HBG crushed metal 0.320 cu.m , sand 0.400 cu.m and cement 350 kgs with water cement ratio of 0.53 (185.5 Lit per cu.m of CC ) etc. horizontal plain sunshades or lofts projecting from the face of the wall 65mm average thickness,80mm thick at the face of the wall and 50mm thick at the free end and cast monolithically with the lintels or tailed to the full thickness of the wall where there are no lintels using 20mm size graded machine crushed hard granite metal (coarse aggregate) from any source conforming to the relevant ISI standards including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing , etc.,complete, including cost of centering charges and excluding cost of steel and its fabrication charges for finished item of work. for Ground floor.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size of 3.5core x 240sq.mm Makes:Dowels/Comet/SMI

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and laying of ISI 25mm outer dia medium (1.80 mm thickness) grade with IS:9537 part 3 regid PVC pipe consealed in wall with all required PVC / Metallic Junction Boxes including masonary work and labour charges etc., complete for Run of mains Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Construction of Brick Masonry 340mm CM (1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete. for ground floor below ground level

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kgs),. 10 mm HBG crushed metal, 0.362 cu.m (471 kgs) , sand 0.407 cu.m (616 kgs.) and cement 380 kgs with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC)etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department including cost of centering, shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). for Lintels Ground Floor

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Painting to new walls with single coat of primer and 2 coats of Acrylic Exterior Emulsion paint of approved brand and shade over a base coat of primer total 3 coats after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911. for external walls for ground floor

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020,strength: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc., complete as directed during execution.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Painting to new walls with single coat of primer and 2 coats of Acrylic interior Emulsion paint - (interior) of approved brand and shade over a base coat of primer total 3 coats after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Painting with Aluminium paint grade-I of approved make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications, etc., complete Two coats for new iron work.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and fixing of Modular type Stepped electronic regulator for sweep AC ceiling fans of 1200mm / 1400mm. of 2 Modular box with suitable cover frame ncluding all standard accessories and all labour charges etc., complete Makes Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T-englaze/ GM-Zenova/Goldmedal(i-Push)

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and transportation of 400 SqmmX 3.5 core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel/ Fortune Arrt

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Wiring with run of 2 of 14/0.3mm (1.0 Sqmm) FRLS PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete for light and bell points in N.R.B.copper cable Makes: Finolex / RR kabel / Havells KEI/Polycab/Gloster/Goldmedal/GM/ Finecab/ Fortune Arrt/Anchor/Millions Accessories make: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)/Anchor Roma (PLUS)

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint Gr-I over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and Run of 2 of 36/0.3mm (2.50 Sq.mm) FRLS with 1 run of 22/0.3mm (1.50 sqmm) FRLS PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete. Makes: Finolex / RR kabel / Havells KEI/Polycab/Gloster/Goldmedal/GM/ Finecab/ Fortune Arrt/Anchor/Million.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Finishing the flooring with Granolithic cement Concrete (1:1:2) for 20 mm thick using 6mm to 12mm size HBG crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m X 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost and conveyance of all materials like cement, metal, sand and water etc., complete for finished item of work.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;SITC of Change Over Panel Board made out of 14 SWG CRCA MS sheet CNC machine shared bent self standing, floor mounting outdoor Cubicle enclosed type. Provided with neoprene rubber gasket MS base frame channel removable cable gland plate at the bottom/Top for cable with Siemens gray or any colour after the anti rust treatment The panel board is inter connected with the following Major materials. Consisting of 4 Pole 630 Amps ON- Load Change Over Switch with HRC Fuse Links and Suitable Copper Bus-Bar, Separate Use / Detachable to Power Distribution Panel Make:-ABB, Schneider, L&T , GE

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kgs),. 10 mm HBG crushed metal, 0.362 cu.m (471 kgs) , sand 0.407 cu.m (616 kgs.) and cement 380 kgs with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC)etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department including cost of centering, shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). For Columns

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Painting with Ready mixed Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/liter approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.Two coats for new Wood work & new plastered surface

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kgs),. 10 mm HBG crushed metal, 0.362 cu.m (471 kgs) , sand 0.407 cu.m (616 kgs.) and cement 380 kgs with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC)etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department including cost of centering, shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). for footings

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10 m including all operational, incidental, labour charges such as shoring,sheeting, planking, strutting, etc. complete for finished item of work. Ordinary soil-Manual means up to 3m depth.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Plain Cement Concrete (1:11/2:3) using 20 mm ( 0.54 cu.m) and 12 mm (0.36cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Painting priming coat with ready mixed Wood primer for New wood work including cost and conveyance of all materials including brushes to have smooth finish as directed during execution.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Providing independent earthling by excavating a pit to a depth of 2.25Mt in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary No.8 G.I. double earth wire and accessories with 18" dia 2" thick hume pipe ring duly providing staggered holes including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder in layers and all labour charges etc., complete

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and Testing of Automatic Power Factor Correction Capacitor Panel Board 125 KVAR at 440 Volts The panel board made out of 14 SWG CRCA MS sheet CNC machine shared bent self standing, floor mounting outdoor Cubicle enclosed type. Provided with neoprene rubber gasket MS base frame channel removable cable gland plate at the bottom/Top for Cable with Siemens gray or any color after the anti rust treatment The panel board is inter connected with the following Major materials. Incomer Switch - 400Amps MCCB 3 Pole with Neutral Link Dynamic APFC Relay: - 12 Stage Digital display of KW, KVAR, KVA, PF, Voltage, Current, Digital display of Compensation parameters Capacitors:- MKP Heavy Duty Capacitors rated Voltage 440VAC Capacitor banks (5+5+5+10+10+10+20+20+20 and fixed 20 KVAR Rated Voltage 440V) along with suitable MCBs/MCCBs for backup Protection Manual Operation:- Separate from APFC Relay Emergency manual operation provision with timer & Axial Fan with Thermostat control , Metering:-V A F Digital Display meter LED Indicators:- 12 Nos (R,Y,B & Stage Indicators & Auto/Manual) APFCPanel Make:-Neptune,Visa-Power,Javiec,Ohm-Power,Best-Power etc

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Providing and fixing precast concrete blocks (interlocking pavers) using not lessthan M40 grade paver blocks and thickness not less than 80 mm for medium traffic areas conforming to IS 15658-2006 of all shapes and designs as per the specification, over sand bed of 20 mm to 40 mm (30 mm average) thickness and compacting with vibrating plate compactor having 3 tonne compaction force there by forcing part of sand underneath to come up in between joints. final compaction of paver surface to be done after spreading and brushing the fine sand into joints to its final level. The work includes cost of all materials such as interlocking pavers, sand etc., Labour and equipments such as cutting machine, lift, loading & unloading to work site clearing, bringing required all materials for the successful completion of work as per drawings and Technical Specification Clause 1504 MORD and as directed during execution by the Engineer-in- charge of the work.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and fixing of 20W,2000 lumens T8,1200mm length LED retrofit tube light with aluminium anodised body, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec 1)..2012 a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and transportation of 45W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 100 lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete. a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green line) / GE-Venture / Crompton(Neo Series) / Bajaj (Edge) / Halonix(Lumos - Super) / Havells (Endura Series) /Capart(Premium)/Greenlites(Hi-Lux) /Polycab/Keselec/ HPL(City Vision)/ Jaquar(Premium)/Eveready/ Surya (Pollux) / FortuneArrt (Leaf) / Rhino(GPSL04) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Providing impervious coat to exposed RCC roof slab surface with CM (1:3), 20mm thick with 500 ml of liquid concentrated micronized cement water proof compound/ 100 ml of Integral cement water proofing admixture complies with IS:2645-2003 of approved make per 50 kg bag of cement laid over roof when it is green including cost of all materials, conveyance charges of materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;supply and fixing of MS tubular pipe roof truss as per design including cost of purlins, cleats , bolts nuts, welding charges and laber charges for lifiting and laying the truss in position an all charges for finished item as directed by the department officer during exeution. Mild steel tubes and pipes of all dia meter as per 15-1161. Labour charges for fabrication all heavy steel work line cost of wellding rods, power charges etc excluding cost of fixing in position BMW-V 16. ADD 25% MPL on labour.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size of 3.5core x 300 sq.mm Makes:Dowels/Comet/SMI

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Ornamental Plastering in Cement morta(1:4)12 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and fixing of PVC synthetic elastomer electrically insulated at conforming to IS: 15652-2006 with Class A insulation having 2mm thickness upto 3.3KV

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;SITC of 315KVA Unitized Compact Sub Station Consisting the following Materials 315 KVA 11KV/433V AC Dry Type Copper Wound Power Distribution Transformer 1No 12KV VCB 630Amps with micro Processor Control Relay - 1No 800Amps 4 Pole ACB with micro Processor Control - 1 No 630Amps 4 Pole MCCB with micro Processor Control - 1No With Suitable Copper Bus bar ,Detailed Technical specification Transformer Make:- CG,Kirloskar,PTE,Trinity,GE VCB Make:- CG, Schneider, L&T, ,ABB,GE , Esennar ACB Make:- CG, Schneider, L&T, ,ABB,GE

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and fixing of ISI mark (IS:15683) Mono ammonium phosphate powder 90 (MAP) 6 Kg Fire extinguisher, stored pressure type, pressure gauge, gross wt. 9.4 kg, empty wt.3.4 kg, Discharge time minimum 13 sec, controllable discharge mechanism, range min. 4 mts applicable on classes A,B, C & electrically started fire, A rating -4 A, B rating -34 B, can construction: Deep drawn and Co2 mig welding, Valve construction: Forging & Machining, internal coating of can: Epoxy powder coating, External coating of Can:Epoxy polyster powder coating, sheet metal thickness:1.60mm, Helium leak detection tested with 5 years warranty Including transportation, all taxes and all labour charges etc complete.Makes : Safex / Kenex / Bharat / Reliance/NewTech .

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply Installation Testing and Commissioning of AUTO MAINS FAILURE (AMF) Panel (Electro-Mechanical Relay Based AMF Panel ) with IP 52 protection, fabricated from CRCA sheet steel 2mmThick , Powder coated finish , Engine START & STOP commands,control RELAYS, selector switches for Ammeter & Voltmeter, Ammeter & Voltmeter ,4pole MCCBs for EB Supply and DG Supply of required rating and breaking capacity,Automatic battery charger(External charger for DG) Control & Power Contactors, Timers, Electronic Hooter ,Visual & Alarm indication for faults, UPS, operator interface panel complete in all respect suitable for following capacity DG sets: 200 to 500 KVA.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and fixing of ABC stored pressure squeeze grip type fire extinguishers, 9 kg capacity, IS:15683 : 2006, filled with ABC Mono Ammonium Phosphate base powder-90 complete with discharge hose and wall mounting bracket, 2mm Mild Steel, EPDM Rubbers, Pressure Guage, which work effectively on all class of fires (A, B, C & Electrical fires) with 5 years warranty Including transportation, all taxes and all labour charges etc complete. Makes : Safex / Kenex / Bharat / Reliance/NewTech .

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made. Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Wiring with run of 3 of 14/0.3mm (1.0 Sqmm) FRLS / HFFR / ZHFR PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete for fan and exhaust fan points in N.R.B. copper cable Makes: Finolex / RR kabel / Havells KEI/Polycab/Gloster/Goldmedal/GM/ Finecab/ Fortune Arrt/Anchor/Millions Accessories make: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)/Anchor Roma (PLUS)

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Design, Fabrication, Supply of Pillar Box made with 14 SWG CRCA sheet. The size of panel should be 1000mm(H) X 900mm (W) X 400mm (D), should be accommodate in the panel with necessary individual doors, separate chambers for incomer, cable entris, metering, bus bars & out going cables etc. All the doors shall be provided with rubber beeding and door knobs / GI metal bolts. The panel board shall be mounted on 40x40x6mm MS angle frame with legs at 4 corners of a length of 600mm each with necessary welding, two coats of enamel block paint over one coat of red oxide. The piller box should be fixed in ground with cement concrete (1:3:6) using 20mm The entire panel should be powder coated with siemens grey colour through 7 tank process. The following switch gear & busbar etc., should be accomidate in the box with necessary holes to be provided to the bottom sheet of the box for incomming / out going cables as directed during execution. Incoming :- 1No. of 400A TPN Switch Disconnector Fuse Unit Cubical type without fuses. Makes: L&T / G E / C&S / ABB / SIEMENS.-1nos & 400Afuses 3nos b) Busbar : 4Nos of 1" X 1/2" size copper flat to be run horizontally in the busbar chamber upto the MCCB and mount on SMC / DMC insulator supports c) Necessary heat shrikable sleeves to be provide to the above copper flats with colour code. d) An earthing terminal should be provide to the panel board.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size of 3.5core x 400 sq.mm Makes:Dowels/Comet/SMI

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and Transportation of Outer dia 120mm and Inner dia 103.5mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes:DURA LINE (Dura Guard) or its equivalent make.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kgs),. 10 mm HBG crushed metal, 0.362 cu.m (471 kgs) , sand 0.407 cu.m (616 kgs.) and cement 380 kgs with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC)etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department including cost of centering, shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). for Roof beams ground Floor

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;SubStation Elctrical CEIG Inspector Approval & Preparation of Drawings of SS Charges Before executing work and after completion of work

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Earth work excavation of Trench in hard ground soil and Sand filling shall be provided at the bottom of trench before laying the cable and laying of U.G cables from 70 Sqmm up to 400 sqmm covering the cable with bricks and back filling of Trench duly providing route indicator at every 8 Mtrs distance embedded in C.C including cost and conveyance of materials and labour charges etc., complete.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and Laying of ISI 25mm outer dia heavy (2.20mm thickness) grade with IS:9537 part 3 regid PVC pipe concealed in Roof Slabs with all required PVC / Metallic Deep Boxes including masonary work and labour charges etc., complete Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Cement Concrete (1:4:8) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing., machine mixing, cost and conveyance of all materials etc., complete.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and Run of 50mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete. (2.36Kgs/1Mtr)

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and transportation of 185 SqmmX 3.5 core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel/ Fortune Arrt

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Providing weld mesh enclosures made out of M.S ' L ' angles of size 25 x 25 x 5mm for outer frame, M.S. ' T 'section of size 25 x 25 x 5mm for central vertical mullion and fixing the 6 G x 10 G weld mesh with openings of size 75mm x 25mm to the frame by using M.S. flat of size 25 x 5mm by means of M.S. bolts and nuts including fixing the frame in position by making holes in walls / R.C.C. fin walls and making good the same and finishing smooth etc., complete as directed during the execution.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supplying and fixing in position Flush doors of different sizes with 35 mm thick Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): of standard make Conforming to IS 2202 solid core flush doors , with one side Teak veneering and other side Commercial facing with hot pressed bonded with liquid phenol formaldehyde with rebate cutting, Double leaf using Best Indian Country wood (Vepa/Neredu) frames of size 65mmx100mm without threshold plate, including cost of M.S "Z" Hold fasts of 230 x 50 x 6mm, M.S Powder coated Butt hinges of 125 x 65 x 2.12mm, screws, nails, etc., complete, (excluding cost of other fixtures which will be paid separately but including labour charges for fixing the fixtures).

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and Run of 25mm x 3mm copper strip (Cuurrent Carrying Capacity 270A) including cost of all accessories and labour charges etc., complete. (0.663Kgs/1Mtr)

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia 'B' Class G.I Pipe of 2.5Mtr length as per National Electric Code and earth connection from electrode Copper strip of 25mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to Copper strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder and providing 18" dia 18" height 3" thick hume pipe ring covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II)

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and transportation of following 16 SqmmX 4 core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel/ Fortune Arrt

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Construction of Brick Masonry 230mm CM (1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete. for ground floor

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and transportation of 240 SqmmX 3.5 core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel/ Fortune Arrt

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and fixing of 4 Way TPN DB Horizontal with IP 20 / 43 Protection as per IS:13032 and suitable for 12 Nos S.P. out goings and for 1 No 4 pole Incommer with 1 No 40A / 63A / 80A / 100A FP Isolator and 12 Nos 6-32 A 10kA SP MCBs of including internal connections and labour charges for SURFACE / FLUSH Mounting etc., complete. Makes: Legrand (Ekinox 3) / Schneider-A9/Hager Novello+/ Seimens/Havells STADx/L&T-Newrange/Indo Asian-Opti Pro/ HPL (Techno).

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply, Transportation and Fixing of 48" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator. including all standard accessories and all labour charges etc., complete.Makes : Crompton HS Plus / Havells ES Neo/Orient Energy Star/ Halonix(Zephyr)/Polycab(Synergy Star) / G.M. (Air Wave Premium)

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and fixing of ISI mark of 16A 3pin / 6A 3 Pin Modular combi socket, 2 nos of 16 Amps Modular switch, 4 Modular box with suitable cover frame and earth connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B. Makes Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)/Anchor Roma (PLUS)

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kgs),. 10 mm HBG crushed metal, 0.362 cu.m (471 kgs) , sand 0.407 cu.m (616 kgs.) and cement 380 kgs with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC)etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department including cost of centering, shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). for Roof Slab 150mm thick for Ground floor.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;SITC of Power Distribution Panel Board made out of 14 SWG CRCA MS sheet CNC machine shared bent self standing, floor mounting outdoor Cubicle enclosed type. Provided with neoprene rubber gasket MS base frame channel removable cable gland plate at the bottom/Top for cable with Siemens gray or any colour after the anti rust treatment The panel board is inter connected with the following Major materials. Consisting of 4 Pole 630 Amps ACB as a Incomer and Out Going Feerders 3 Nos, 4 Pole 400 Amps SDFU & 4 Nos 3 Pole 250 Amps SDFU with Neutral Link and Suitable Copper Bus-Bar and Digital Multifunction 4 Row LED Metering Set to Read V,A,VA,Watt,PF Hz, etc Switch Gear Make:- HPL,ABB, Schneider, L&T

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and Fixing of ISI 25mm outer dia medium (1.80mm thickness) grade with IS:9537 part 3 regid PVC pipe on surface of wall with PVC / Metallic junction boxes fixing on chromium plated metallic base saddles including all required materials and labour charges etc., complete for run of mains.(Data No. ) PVC PIPE Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and fixing of 2 No of 6A/10A ISI Mark 3/2 pin Modular socket with 6A/10A 1way Modular switch, 6 Module box with cover frame on a Common switch board including cost and conveyance of all materials and all labour charges etc., complete in N.R.B. / R.B. Makes : Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)/Anchor Roma (PLUS)

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and fixing of fan hook in RCC slab of 12/15mm dia MS Rod while laying the slab.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete. (1.18Kgs/1Mtr)

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Providing High Yield Strength deformed (HYSD)/ Thermo mechanically treated (TMT) steel bars of Fe 415 grade (as per IS 1786 - 1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings,welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered).

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kgs),. 10 mm HBG crushed metal, 0.362 cu.m (471 kgs) , sand 0.407 cu.m (616 kgs.) and cement 380 kgs with water cement ratio of 0.48 ( 182.40 ltrs/ cu.m of CC)etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department including cost of centering, shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). for Plinth beam

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size of 3.5core x 185sq.mm Makes:Dowels/Comet/SMI

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and transportation of following 9.00 Mtrs height, Bottom dia 210mm, Top 76mm, AV thickness 6mm and to withstand maximum wind velocity 180Km/Hr glass reinforced polymer (GRP) composite type Conical pole with single arm bracket of length 1Mtr and internal junction box including labour charges etc., complete. Makes: Bajaj / Kemrock / Valmont/Sumip/Helipole

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Painting to new walls with single coat of primer and 2 coats of Acrylic Exterior Emulsion paint - (external) of approved brand and shade over a base coat of primer total 3 coats after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for External walls for First floor

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Plastering in Cement mortar (1:5) 20 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete-Internal walls

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Earth work excavation of Trench in hard ground soil and Sand filling shall be provided at the bottom of trench before laying the cable and laying of U.G cables up to 50 sqmm covering the cable with bricks and back filling of Trench duly providing route indicator at every 8 Mtrs distance embedded in C.C including cost and conveyance of materials and labour charges etc., complete

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and Run of 50mm x 6mm copper strip (Cuurrent Carrying Capacity 630A) including cost of all accessories and labour charges etc., complete. (2.680Kgs/1Mtr)

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Supply Installation and Commissioning of 315KVA Unitized Compact Substation and 320KVA Generator for;Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure