South Central Railway Tender

Wheel Iron Skids: Specification For Wheel Skid For Use Of Indian Railways Bg Stock As Per Rdso Drg. Attached As Annexure-a To Rdso Specification No. Tfc/spec./374/skid Dated 26/09/2013 Or Latest As Per Annexure Attached.

Gasket For Pressure Gauge

Set Of Bushes For Wap-7/wag-7 Locos

Gasket For Sand Trap.

Set Of Brake Equaliser Of Wag7 Loco

Slt For Erc Mk V Rdso Drg No.t-5919

Rubber Kit For 3 Piece Design 1 1/4 Inch Bp/fp Angle Cock

Supply And Fitment Of 30 Ton Hydraulic Jack Suitable For Replacement Of Adapters & Em Pads.tenderer Shall Submit The Clause Wise Compliance For The Attached Specification, Else Offer Will Be Passed Over

Hanger Lever (end) For Air Brake Gear Of Wag7 Loco To Clw Drg. No. O6/ 3/19/1o, Alt.5 With Bushes Conforming To Mn. Steel Irs R-65.

Supply & Commissioning Of Trolley For Seized Roller Bearing Wheels Of Loco Coach & Wagons (wheel Skate Trolley) As Per The Specifications And Drawing Enclosed

700hp Demu Dpc-vijayawada-plno-98112326-(hsn -86079100). Cond And U/s Over Aged 700hp Demu Dpc No:15013, 15014, 15015 Of Dls/bza. These Three Demu Dpc Consisting Of Engine Block Complete, Ventilation Fan With Motor, Radiator Fan With Motor, Radiator With Expansion Tank, Hydraulic Pump, Hydraulic Oil Tank & Oil Cooler, Fuel Tank, Muffler Tank With Exhaust Bellows, Engine Block Bed , Turbo Super Chaser,, Air Brake System Valves(a9, Sa9, C2, C3w & Feed Valve),a9, Sa9, C2, C3w Feed Valves. Main Reservoirs, Auxiliary Reservoirs, Wiper Motor & Arm Assembly With Operating Knob,, Air Compressor Trc 1000b, Parking Brake Magnetic Valves, Horn Flutes With Operating Valves, Modified Abd Valves, Angle Cut Out Cocks, Mr Safety Valves, Dead Man Relay Valves, Traction Alternator, Traction Motors With Nose Caps, Main Rectifier Assembly, 100v Auxiliary Alternator-18.5kw, Rra, Master Controller , Bl Box,, 100v Gp Relays, Electro Pneumatic Contractors, Em Contractors, 2 Motors Reversers, Speed Sensor & Indicator Assembly, Engine Starting &control Panel, Head Light Unit, Flasher Light Unit, Dc-dc Converter, 8v 450ah Lead Acid Batteries, 6v Batteries. Truck Assembly, Axle Box With Bearings , Buffer Complete, Schaku Coupler Assembly, , Brake Cylinders, Wear Pieces, Gear Case Assemblies, 24b/charger Alternator, 24v Self Starter, Cable, Control Wiring Lumpsum, Actuator, Fsd, Driver Cab Fan, Brass Bearings, Centre Pivot Pin Brass Bush, Etc. Note: In Demu Dpc No;15013-buffer Complete -02 Nos Are Not Available. In Demu Dpc No:15014- Main Alternator -01 Nos, Traction Motor With Nose Caps-04 Nos, Fans-20 Nos Are Not Available. In Dpc No;15015-rra & Blower Motor-01nos, Cylinder Heads-02nos, Connecting Rod With Pistons-12 Nos, Fip-01nos, Turbo Super Chargers-02 Nos, Water Pump With Housing -01nos, After Coller & Lube Oil Coller-02 Nos Are Not Available. The Above 3 Dpc Of All Items ( Except Rc Items) Contains- Ferrous-131540.97 Kg, Copper-6561.51kg, , Brass-1140.20kg, Aluminium-2235.20kg, , Stainless Steel-2850.00kg, Wood-1500kg. Total Lot Qty-145.828 Mt. ( Except Rc Items). Available At Rayanapadu Work Men Spl Sinding. Delivery On Lot Basis. Ds-8. No :236200001/2/3., Dt.11.06.25.note-1. Rc Items Should Be Handing Over By The Purchaser Before Effecting The Delivery.2) While Cutting Processes Purchaser Has To Stock The Similar Type Of Material In The Separate Places In Separate Heap. Purchasers Shall Visit The Lot For Physical Inspection Of The Material And Site Before Bidding In E-auction. Note- Cutting Is Permitted For Dismantling/loading Purpose. Note: Rc Items-1) Wheel Sets With Bull Gear-12nos . 2)8v 450ah Lead Acid Batteries-9 Nos. 3) Batteries-46 Nos(6v Batteries-36nos, 10 V Batteries-10 Nos). Cutting Is Permited For Dismantling/loading Purpose

Bush For 10" Bogie Mounted Brake Cylinder

Centering Disc.

Procurement Of Cummins Make Spares For Track Machines

Stanchion Bracket (rh) For Brna Wagon

Silent Block For Brake Caliper

Procurement Of Various Types Of Bushes For Track Machine.

Procurement Of Deutz Make Spares For Track Machines

Brake Cylinder 300mm, Conforming To Appendix - B Of Rdso Spec. No. 02-abr-02 With Amendment- No. 4 Of Sept. 2016 To Rdso Drg No : Wd-92051- s-11, Alt : 3.

700 Hp Demu Dpc- Vijayawada-plno-98112326-(hsn -86079100). Cond And U/sover Aged 700 Hp Demu Dpc No: 15014 Of Dls/bza. Consisting Of Engine Block Complete, Ventilation Fan With Motor, Radiator Fan With Motor, Radiators With Expansion Tank, Hydraulic Pump, Hydraulic Oil Tank &oil Cooler, Fuel Tank, Muffler Tank With Exhaust Bellows, Engine Block Bed, Turbo Super Chargers, Air Brake System Valves(a9, Sa9, C2, C3w & Feed Valve),a9, Sa9, C2, C3w Feed Valves. Main Reservoirs, Auxiliary Reservoirs, Wiper Motor & Arm Assemble With Opening Knob, Air Compressor Trc 1000b, Parking Brake Magnetic Valves, Horn Flutes With Operating Valves, Modified Abd Valves, Angle Cut Out Cocks, Mr Safety Valves, Dead Man Relay Valves, ,main Rectifier Assembly, Regulator Rectifier Assembly (rra), Master Controller , Bl Box,, 100v Gp Relays, Electro Pneumatic Contractors, Em Contractors, 2 Motors Reversers, Speed Sensor & Indicator Assembly, Engine Starting &control Panel, Head Light Unit, Flasher Light Unit, Dc-dc Converter, 8v 450ah Lead Acid Batteries, 6v Batteries. Truck Assembly, Axle Box With Bearings, Buffer Complete, Schaku Coupler Assembly, Brake Cylinders, Wear Pieces, Gear Case Assemblies, 24b/charger Alternator, 24v Self-starter, Cable, Control Wiring Lump Sum, Actuator, Fsd, Driver Cab Fan, Brass Bearings, Centre Pivot Pin Brass Bush, Etc. The Above All Items ( Except Rc Items) Contains- Ferrous-38320.99, Copper-1128.17kg, Brass-305.40kg, Aluminium-828.40kg, Stainless Steel-950.00kg, Wood-500kg. Total Qty-42.033 3) Mt. ( Except Rc Items). Note- In This 700 Hp Demu Dpc (main Alternator-01 Nos., Traction Motor With Nose Caps-04 Nos., Fans-20 Nos., Are Not Available). Available At Rayanapadu Workmen Spl Siding. Delivery On Lot Basis. Ds-8. No: 236200002 Dt.01/04/2025. Note-1. Rc Items Should Be Handing Over By The Purchaser Before Effecting The Delivery. 2) While Cutting Processes Purchaser Has To Stock The Similar Type Of Material In The Separate Places In Separate Heap. Purchasers Shall Visit The Lot For Physical Inspection Of The Material And Site Before Bidding In E-auction. Note- Cutting Is Permitted For Dismantling/loading Purpose.