Panchayat Raj Engineering Department Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Panchayat Raj Engineering Department Tender
Civil And Construction
Building Construction
Opening Date24 Dec 2024
Closing Date7 Jan 2025
Tender Amount₹ 3,39,10,186
Costs
EMD
₹ 3,39,200Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
776031Tender No
NIT No. 42/2024-25 Dt.18.11.2024 and Amnd no 1/24-25 dt 14.12.2024 of the Superintending Engineer, PR Circle, Guntur.Tender Authority
Panchayat Raj Engineering Department ViewPurchaser Address
-Website
http://tender.apeprocurement.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Supply and placing of the Deisign Mix Concrete M25 grade corresponding to Table 9 of IS 456 with minimum cement content of 380 khg per 1 cum of concrete using Weigh Bathces/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383-1970 and IS 2386 part 1 to part8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. (APSS No. 402) For PEDESTALS (Below Plinth).
6.26
11657
72933.52
... More
Supply and placing of the VRCC M25 Design mix Concrete corresponding to Table 9 of IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of work. For PLINTH BEAM
27.43
13669
374956.85
... More
Supply and placing of the Deisign Mix Concrete M25 grade corresponding to Table 9 of IS 456 with minimum cement content of 380 khg per 1 cum of concrete using Weigh Bathces/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383-1970 and IS 2386 part 1 to part8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. For Columns.
50.32
14281
718621.43
... More
Supply and placing of the Deisign Mix Concrete M25 grade corresponding to Table 9 of IS 456 with minimum cement content of 380 khg per 1 cum of concrete using Weigh Bathces/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383-1970 and IS 2386 part 1 to part8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. For LINTELS.
6.32
13922
87988.49
... More
Supply and placing of the RCC M25 Design mix Concrete corresponding to Table 9 of IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for laying of concrete 75 mm thick at fixed end and 50 mm thick at free end with an average thickness of 62.5mm including royalties and all taxes and all charges for finished item of work for 60.0 cm wide sun-shade and Lofts but excluding GST and seignorage charges for finished item of work.
18.72
1063
19917.14
... More
Supply and placing of the Deisign Mix Concrete M25 grade corresponding to Table 9 of IS 456 with minimum cement content of 380 khg per 1 cum of concrete using Weigh Bathces/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383-1970 and IS 2386 part 1 to part8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. For Roof level beams
35.64
12193
434560.66
... More
Supply and placing of the Deisign Mix Concrete M25 grade corresponding to Table 9 of IS 456 with minimum cement content of 380 khg per 1 cum of concrete using Weigh Bathces/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383-1970 and IS 2386 part 1 to part8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for RCC Slabs, beams for:-Slabs-Design Mix : M 25(Weigh Batch) ROOF SLAB Ground floor 150 thick
669.63
1602
1073370.02
... More
Supply and placing of the Deisign Mix Concrete M25 grade corresponding to Table 9 of IS 456 with minimum cement content of 380 khg per 1 cum of concrete using Weigh Bathces/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383-1970 and IS 2386 part 1 to part8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for RCC Slabs, beams for:-Slabs-Design Mix : M 25(Weigh Batch) Staircase Slab of 200 mm thick
21.6
2017
43577.14
... More
Brick masonry 230 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement: sand) minimum crushing strength of 2.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to scaffolding charges, constructing masonry, lift charges, curing etc., complete for finished item of work as per SS 504. for:-Brick Masonry in CM 1:6 ( For Basement)
30.04
8786
263948.86
... More
Filling of excavated earth in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm, consolidating each deposited layer by watering and ramming etc., complete as per APSS No. 309 & 310
390.32
42
16467.6
... More
Filling of Basement with Quarry Rubbish with initial lead and lift in layers not exceeding 15 cm layers, consolidating each deposited layer by watering and ramming etc., complete as per APSS No. 309 & 310.
118.7
269
31992.02
... More
Filling of Basement with Stone Dust with initial lead and lift in layers not exceeding 15 cm layers, consolidating each deposited layer by watering and ramming etc., complete as per APSS No. 309 & 310.
290.24
831
241351.97
... More
Providing Brick work of 230mm thick in CM (1:8) prop., using common burnt clay bricks of class as per Table-1 of IS:1077-1992 Non-Modular or traditional size , including cost & conveyance of all material and labour charges, centering & scafolding charges, and overhead charges & Contractors profit etc., complete as per APSS No.501 for Super structure and others but excluding GST and seignorage chages.
111.04
9283
1030885.37
... More
Providing 11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using Non Modular/ traditional size bricks including cost of all materials, seigniorage charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work, but excluding conveyance charges of materials
455.09
1207
549439.26
... More
Plain Cement Concrete of (1:4:8:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG M/c (SS5) metal with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, overhead charges & Contractors profit etc., complete but excluding GST & seigniorage charges, sales & other taxes on all materials,for finished item of work for Foundations (APSS No. 402).
59.46
4630
275358.67
... More
Supply and placing of the PCC M20 Nominal mix Concrete corresponding to Table 9 of IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of work. For Steps
1.09
8802
9594.55
... More
Providing Flooring to Treads of steps with High polisd Granite 16 to 18mm thick length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
28.35
2706
76732.11
... More
Providing Mild steel flats and bars for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, including cost of fixing in position as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, all operational, incidental, and labour charges such as cutting, bending, placing in position etc., but excluding GST for finished item of work (APSS No.126) in all floors. For window grills, staircase railing & Compound wall grills etc
1600
125
200320
... More
Supply and fixing of Flush Door shutter of size 1.20 x 2.10 mt with block board type with teak veneer on one face and commercial ply on another face-35 mm thick (conforming to IS:2202 of shubdwara), with frame made of TEAK WOOD scantlings of size 100 x75mm including fixers of 6 nos of 9" ' z" holdfasts, 300 mm long aluminium aldrop-1 no, 150mm long aluminium butt hinges 3 No's, 200 mm long aluminiumTower bolt 1- no, 150mm long aluminiumTower bolt 1- no, MS Powder coated fancy handles 150 mm -2nos with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete but excluding GST as per specifications (APSS NO.1001 & 1002).
5
22923
114619.45
... More
Supply and fixing of Flush Door shutter of size 1.05 x 2.10 mt with block board type with teak veneer on one face and commercial ply on another face-35 mm thick (conforming to IS:2202 of shubdwara), with frame made of Sal WOOD scantlings of size 100 x75mm including fixers of 6 nos of 9" ' z" holdfasts, 300 mm long aluminium aldrop-1 no, 150mm long aluminium butt hinges 3 No's, 200 mm long aluminiumTower bolt 1- no, 150mm long aluminiumTower bolt 1- no, MS Powder coated fancy handles 150 mm -2nos with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete but excluding GST as per specifications (APSS NO.1001 & 1002).
8
11645
93163.04
... More
Supply and fixing of Flush Door Frame of size 0.75 x 2.10mt with frame made of Sal Wood scantlings of size 100 x 75mm including fixers of 6 nos of 9" ' z" holdfasts, with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete but excluding GST as per specifications (APSS NO.1001 & 1002).
4
4356
17425.68
... More
Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi- chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm).
26.46
10225
270562.76
... More
Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including over heads & contractor profitcost and conveyance of all materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab but excluding GST and seignorage charges etc,, complete for finished item of work
43.21
599
25912.6
... More
Ornamental Ceiling plastering of 12mm thick with CM (1:3) including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, but excluding GST and seignorage charges, etc., complete for for finished item of work. (APSS 901,903 & 904) (CSSR) for CEILING PLASTERING.GF
644.74
219
141758.98
... More
Plastering to brick masonary wall with 20mm thick double coat in CM (1:6) 16 mm thick base coat and CM (1:4) of 4mm thick top coat with dubara sponge finish including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, but excluding GST and seignorage charges, etc., complete for for finished item of work. (APSS 901,903 & 904) (CSSR) for outer Walls.GF
828
575
476282.16
... More
Plastering 12 mm thick in two coats with base coat of 8mm thick in CM (1:4) and top coat of 4mm thick in CM (1:6) with dubarasponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site,,sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges formixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc.,complete for Internal & Even faces of Brick Wall and RCC exposed faces for finished item of work. (SS 901,903 & 904) for:-Plastering 2/c in CM (1:4) & (1:6): 12 mm
1676.04
562
943191.51
... More
Flooring with vitrified tiles of 1st quality and of size not less than 598 x 598 mm x 8 mm thickness glossy finish permium colours, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand, and water and flooring tiles etc., complete, including over heads & contractor profit, labour charges etc., complete for finished item of work, but excluding GST and seignorage charges.
585.41
1320
773297.34
... More
Providing Skirting to internal walls to 15 cm height/risers of steps with vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including over heads & contractor profit cost and conveyrance of all materials like tiles, cement, sand and water etc., complete but excluding GST and seigniorage charges, etc., complete for finished item of work.
57.51
1340
77082.38
... More
Flooring with Ceramic non skid tiles of not less than 7.3mm thick 1st quality laid over floor bed /VRCC slab set over 12.0 mm th.in CM (1:8 ) prop. base coat and neat grey cement slurry of honey like consistence spread at the rate of 3.3 kg of cement per Sqm and jointed with neat white cement paste mixed with pigment of matching shade including cost and conveyance of all materials to site, including cost of mixing of mortar and watering, leveling to proper slope and curing including over heads & contractor profit, all labour charges etc., and excluding GST and seignorage charges for finished item of work but excluding cost of CC bed and dadoing to walls . (BLD-CSTN-9-6).
81.83
1059
86693.98
... More
Dadooing with Glaged Tiles with 1st quality Decorated coloured background glazed tiles 200mm x 300 mm manufactured by ISO approved firm set over 12mm thick CM (1:3) base coat and neat grey cement slurry of Honey like consistency at the rate of 3.3 Kgs per sqmt. and jointed with white cement paste mixed with pigment of matching shade to match the shade of tiles including cost & conveyance of all materials and water to work site, all operational, incidental, and labour charges such as mixing mortar, fixing in position, including lift charges, curing including cutting the brick masonry walls and redoing the same such that the top surface of tiles is to be flushed with plastered surface etc., complete for finished item of work for all floors. (APSS NO. 701 & 707)
115.02
849
97717.54
... More
Painting to new walls with 2 coats of Plastic Emulsion Paint Asian/ Berger/ Nerolac/ Saicoat/Indocem or Equivalent and shade over Priming Coat with Cement Primer Waterbase Interior Gr- 1 Asian/ Berger/ Nerolac/ Saicoat/Indocem or Equivalenton New Plastered Surfaceafter thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges but excluding GST etc, complete for finished item of work as per SS 911 FOR EXRTERNAL WALLS.
828
294
243705.24
... More
Painting to new walls with 2 coats of Plastic Emulsion Paint Asian/ Berger/ Nerolac/ Saicoat/Indocem or Equivalent and shade over Priming Coat with Cement Primer Waterbase Interior Gr- 1 Asian/ Berger/ Nerolac/ Saicoat/Indocem or Equivalenton New Plastered Surfaceafter thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges but excluding GST etc, complete for finished item of work as per SS 911 FOR INTERNAL WALLS.
1676.04
216
362477.17
... More
Supplying and fixing of Stainless Steel (grade 304) Hand Railing as per approved drawing with top rail of 50mm dia pipe, 2mm thick medium class, 4 Nos of 20mm dia pipes 1.6mm thick medium class as inner railing horizantal, and 3 nos. fixed with base plate of 75mm dia using bonding agent and anchor fastener and welding, drilling of 32mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thoroughly, lacquer finishing to present seeamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labnour charges, over heads and contractors profit etc., complete for finished item of work.
15
2280
34208.4
... More
Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including soverhead charges & Contractors profit but exlcuding GST and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
33.23
91714
3047538.51
... More
HEAD ROOM
-
-
-
... More
Supply and placing of the Deisign Mix Concrete M25 grade corresponding to Table 9 of IS 456 with minimum cement content of 380 khg per 1 cum of concrete using Weigh Bathces/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383-1970 and IS 2386 part 1 to part8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. For Columns.
1.08
15425
16659.27
... More
Supply and placing of the Deisign Mix Concrete M25 grade corresponding to Table 9 of IS 456 with minimum cement content of 380 khg per 1 cum of concrete using Weigh Bathces/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383-1970 and IS 2386 part 1 to part8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. For LINTELS.
0.81
14836
12017.93
... More
Supply and placing of the Deisign Mix Concrete M25 grade corresponding to Table 9 of IS 456 with minimum cement content of 380 khg per 1 cum of concrete using Weigh Bathces/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383-1970 and IS 2386 part 1 to part8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. For RCC SLABS, BEAMS
2.01
13013
26157.9
... More
Supply and placing of the Deisign Mix Concrete M25 grade corresponding to Table 9 of IS 456 with minimum cement content of 380 khg per 1 cum of concrete using Weigh Bathces/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383-1970 and IS 2386 part 1 to part8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for RCC Slabs, beams for:-Slabs-Design Mix : M 25(Weigh Batch)ROOF SLAB Ground floor 150 thick
44.73
1881
84163.97
... More
Supply and placing of the RCC M25 Design mix Concrete corresponding to Table 9 of IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for laying of concrete 75 mm thick at fixed end and 50 mm thick at free end with an average thickness of 62.5mm including royalties and all taxes and all charges for finished item of work for 60.0 cm wide sun-shade and Lofts but excluding GST and seignorage charges for finished item of work.
1.8
1403
2525.56
... More
Providing impervious coat over RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with water proofing compound at 1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including Cost and Conveyance of all materials complete for finished item of work (APSS No. 901 & 903).(CSSR
44.73
649
29053.48
... More
Providing Brick work of 230mm thick in CM (1:8) prop., using common burnt clay bricks of class as per Table-1 of IS:1077-1992 Non-Modular or traditional size , including cost & conveyance of all material and labour charges, centering & scafolding charges, and overhead charges & Contractors profit etc., complete as per APSS No.501 for Super structure and others but excluding GST and seignorage chages.
25.25
9776
246849.56
... More
Supply and fixing of Flush Door shutter of size 1.05 x 2.10 mt with block board type with teak veneer on one face and commercial ply on another face-35 mm thick (conforming to IS:2202 of shubdwara), with frame made of Sal WOOD scantlings of size 100 x75mm including fixers of 6 nos of 9" ' z" holdfasts, 300 mm long aluminium aldrop-1 no, 150mm long aluminium butt hinges 3 No's, 200 mm long aluminiumTower bolt 1- no, 150mm long aluminiumTower bolt 1- no, MS Powder coated fancy handles 150 mm -2nos with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete but excluding GST as per specifications (APSS NO.1001 & 1002).
1
11645
11645.38
... More
Supply and placing of the PCC M20 Nominal mix Concrete corresponding to Table 9 of IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of work. For Steps
0.77
8930
6876.63
... More
Providing Flooring to Treads of steps with High polisd Granite 16 to 18mm thick length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
21.87
3031
66296.5
... More
Providing Mild steel flats and bars for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, including cost of fixing in position as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, all operational, incidental, and labour charges such as cutting, bending, placing in position etc., but excluding GST for finished item of work (APSS No.126) in all floors. For window grills, staircase railing & Compound wall grills etc
160
125
20032
... More
Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi- chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm).
2.25
10225
23007.04
... More
Ornamental Ceiling plastering of 12mm thick with CM (1:3) including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, but excluding GST and seignorage charges, etc., complete for for finished item of work. (APSS 901,903 & 904) (CSSR) for CEILING PLASTERING.GF
45.21
245
11096.79
... More
Plastering to brick masonary wall with 20mm thick double coat in CM (1:6) 16 mm thick base coat and CM (1:4) of 4mm thick top coat with dubara sponge finish including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, but excluding GST and seignorage charges, etc., complete for for finished item of work. (APSS 901,903 & 904) (CSSR) for outer Walls.SF
61.24
631
38698.78
... More
Plastering 12 mm thick in two coats with base coat of 8mm thick in CM (1:4) and top coat of 4mm thick in CM (1:6) with dubarasponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site,,sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges formixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc.,complete for Internal & Even faces of Brick Wall and RCC exposed faces for finished item of work. (SS 901,903 & 904) for:-Plastering 2/c in CM (1:4) & (1:6): 12 mm
325.29
619
201497.64
... More
Painting to new walls with 2 coats of Plastic Emulsion Paint Asian/ Berger/ Nerolac/ Saicoat/Indocem or Equivalent and shade over Priming Coat with Cement Primer Waterbase Interior Gr- 1 Asian/ Berger/ Nerolac/ Saicoat/Indocem or Equivalenton New Plastered Surfaceafter thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges but excluding GST etc, complete for finished item of work as per SS 911 FOR EXRTERNAL WALLS.
61.24
294
18024.77
... More
Painting to new walls with 2 coats of Plastic Emulsion Paint Asian/ Berger/ Nerolac/ Saicoat/Indocem or Equivalent and shade over Priming Coat with Cement Primer Waterbase Interior Gr- 1 Asian/ Berger/ Nerolac/ Saicoat/Indocem or Equivalenton New Plastered Surfaceafter thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges but excluding GST etc, complete for finished item of work as per SS 911 FOR INTERNAL WALLS.
325.29
216
70350.47
... More
Supplying and fixing of Stainless Steel (grade 304) Hand Railing as per approved drawing with top rail of 50mm dia pipe, 2mm thick medium class, 4 Nos of 20mm dia pipes 1.6mm thick medium class as inner railing horizantal, and 3 nos. fixed with base plate of 75mm dia using bonding agent and anchor fastener and welding, drilling of 32mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thoroughly, lacquer finishing to present seeamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labnour charges, over heads and contractors profit etc., complete for finished item of work.
10
2280
22805.6
... More
Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including soverhead charges & Contractors profit but exlcuding GST and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
3
91714
275143.71
... More
SPORTS HALL
-
-
-
... More
Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308) including cost and conveyance of all material and labour charges, and contractors profit & over heads but excluding seignorage charges and GST etc., complete.
391.02
479
187623.13
... More
Plain Cement Concrete of (1:4:8:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG M/c (SS5) metal with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, overhead charges & Contractors profit etc., complete but excluding GST & seigniorage charges, sales & other taxes on all materials,for finished item of work for Foundations (APSS No. 402).
26.44
4630
122443.38
... More
Supply and placing of the Deisign Mix Concrete M25 grade corresponding to Table 9 of IS 456 with minimum cement content of 380 khg per 1 cum of concrete using Weigh Bathces/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383-1970 and IS 2386 part 1 to part8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. (APSS No. 402) For Footings
47.52
11068
525963.72
... More
Supply and placing of the Deisign Mix Concrete M25 grade corresponding to Table 9 of IS 456 with minimum cement content of 380 khg per 1 cum of concrete using Weigh Bathces/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383-1970 and IS 2386 part 1 to part8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. (APSS No. 402) For PEDESTALS (Below Plinth).
20.46
11657
238483
... More
Supply and placing of the VRCC M25 Design mix Concrete corresponding to Table 9 of IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of work. For PLINTH BEAM
23.6
13669
322602.32
... More
Supply and placing of the Deisign Mix Concrete M25 grade corresponding to Table 9 of IS 456 with minimum cement content of 380 khg per 1 cum of concrete using Weigh Bathces/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383-1970 and IS 2386 part 1 to part8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. For Columns.
13.69
14281
195493
... More
Supply and placing of the Deisign Mix Concrete M25 grade corresponding to Table 9 of IS 456 with minimum cement content of 380 khg per 1 cum of concrete using Weigh Bathces/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383-1970 and IS 2386 part 1 to part8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. For LINTELS.
5.23
13922
72813.26
... More
Supply and placing of the RCC M25 Deisign mix Concrete corresponding to Table 9 of IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for laying of concrete 75 mm thick at fixed end and 50 mm thick at free end with an average thickness of 62.5mm including royalties and all taxes and all charges for finished item of work for 60.0 cm wide sun-shade and Lofts but excluding GST and seignorage charges for finished item of work.
12.96
1063
13788.79
... More
Supply and placing of the Deisign Mix Concrete M25 grade corresponding to Table 9 of IS 456 with minimum cement content of 380 khg per 1 cum of concrete using Weigh Bathces/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383-1970 and IS 2386 part 1 to part8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. For RCC SLABS, BEAMS
10.07
12193
122784.11
... More
Supply and placing of the Deisign Mix Concrete M25 grade corresponding to Table 9 of IS 456 with minimum cement content of 380 khg per 1 cum of concrete using Weigh Bathces/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383-1970 and IS 2386 part 1 to part8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for RCC Slabs, beams for:-Slabs-Design Mix : M 25(Weigh Batch)ROOF SLAB Ground floor 150 thick
185.98
1602
298112.92
... More
Brick masonry 230 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement: sand) minimum crushing strength of 2.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to scaffolding charges, constructing masonry, lift charges, curing etc., complete for finished item of work as per SS 504. for:-Brick Masonry in CM 1:6 ( For Basement)
16.45
8786
144539.24
... More
Filling of Basement with Quarry Rubbish with initial lead and lift in layers not exceeding 15 cm layers, consolidating each deposited layer by watering and ramming etc., complete as per APSS No. 309 & 310.
297.68
269
80230.71
... More
Filling of Foundation trenches and Basement with Stone Dust with initial lead and lift in layers not exceeding 15 cm layers, consolidating each deposited layer by watering and ramming etc., complete as per APSS No. 309 & 310.
580.59
831
482798.75
... More
Providing Brick work of 230mm thick in CM (1:8) prop., using common burnt clay bricks of class as per Table-1 of IS:1077-1992 Non-Modular or traditional size , including cost & conveyance of all material and labour charges, centering & scafolding charges, and overhead charges & Contractors profit etc., complete as per APSS No.501 for Super structure and others but excluding GST and seignorage chages. For Superstructure
112.51
9283
1044532.71
... More
Plain Cement Concrete of (1:4:8:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG M/c (SS5) metal with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, overhead charges & Contractors profit etc., complete but excluding GST & seigniorage charges, sales & other taxes on all materials,for finished item of work for Foundations (APSS No. 402).
228.22
4630
1056884.54
... More
Providing Flooring to Treads of steps with High polisd Granite 16 to 18mm thick length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
76.14
2706
206080.52
... More
Providing Mild steel flats and bars for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, including cost of fixing in position as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, all operational, incidental, and labour charges such as cutting, bending, placing in position etc., but excluding GST for finished item of work (APSS No.126) in all floors. For window grills, staircase railing & Compound wall grills etc
1500
125
187800
... More
Supply and fixing of Flush Door shutter of size 1.20 x 2.10 mt with block board type with teak veneer on one face and commercial ply on another face-35 mm thick (conforming to IS:2202 of shubdwara), with frame made of TEAK WOOD scantlings of size 100 x75mm including fixers of 6 nos of 9" ' z" holdfasts, 300 mm long aluminium aldrop-1 no, 150mm long aluminium butt hinges 3 No's, 200 mm long aluminiumTower bolt 1- no, 150mm long aluminiumTower bolt 1- no, MS Powder coated fancy handles 150 mm -2nos with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete but excluding GST as per specifications (APSS NO.1001 & 1002).
8
22923
183391.12
... More
Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi- chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm).
24.3
10225
248476.01
... More
Supply and fixing of NCL super series prepainted steel Ventilators 2'.0" x 2'.0" (609.6x609.6 mm ) (Box section) outer frame section size of 33 x 56 mm fixed lovers etc. complete.
4.32
5811
25105.29
... More
Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including over heads & contractor profitcost and conveyance of all materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab but excluding GST and seignorage charges etc,, complete for finished item of work
200.77
599
120399.76
... More
Ornamental Ceiling plastering of 12mm thick with CM (1:3) including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, but excluding GST and seignorage charges, etc., complete for for finished item of work. (APSS 901,903 & 904) (CSSR) for CEILING PLASTERING.GF
113.01
271
30627.97
... More
Plastering to brick masonary wall with 20mm thick double coat in CM (1:6) 16 mm thick base coat and CM (1:4) of 4mm thick top coat with dubara sponge finish including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, but excluding GST and seignorage charges, etc., complete for for finished item of work. (APSS 901,903 & 904) (CSSR) for outer Walls.GF
492.25
575
283152.05
... More
Plastering 12 mm thick in two coats with base coat of 8mm thick in CM (1:4) and top coat of 4mm thick in CM (1:6) with dubarasponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site,,sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges formixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc.,complete for Internal & Even faces of Brick Wall and RCC exposed faces for finished item of work. (SS 901,903 & 904) for:-Plastering 2/c in CM (1:4) & (1:6): 12 mm
612.62
562
344751.91
... More
Flouring with CM(1:3), 20mm thick over already laid CC bed including cost and conveyance of all materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab but excluding GST and seignorage charges etc,, complete for finished item of work.
947.49
510
483238.85
... More
Roofing: - Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self apping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided ith
anti capillary grov
943
986
929967.74
... More
Supply of Roof Accessories medium size: Ridge, Barge Cap, Corner Trim, LFlashing, Down Pipes, Gutter etc., with 0.50mm thick, Width: 0.585, Length: Maximum 2½ Meters
41.5
328
13626.53
... More
Pre Engineered Building (PEB): Secondary members which includes Purlins, Girts, Edge Angle, etc.Members formed from Galvanized Coils of 275 GSM and will conform to the physical specifications of TMA572/A572M (Grade 50) or equivalent. and shall have a minimum yield strength of 345 MPA
68000
127
8670000
... More
Providing Vinyl Flooring Sheets/ tiles having a nominal total thickness of 2 mm with a wearing surface impregnated polyurethane homogeneous mixture of PVC, Plasticizers, Urethane, color pigments with wearing resistance and Fire Resistance as per standards.etc. complete for finished item of work.
955.94
672
642965.24
... More
Providing and fixing polyurethane foam (PUF) slab 40mm thick average with PU slab density 36+/-2 kg/m³ for external wall insulation including necessary polymerized plaster reinforced with glass fibre mesh, epoxy based bonding adhesive etc., complete with all lead and lift, transportation charges, loading unloading charges, all taxes, cost of all materials, labour, HOM etc., complete.
658.42
1445
951535.42
... More
Painting to new walls with 2 coats of Plastic Emulsion Paint Asian/ Berger/ Nerolac/ Saicoat/Indocem or Equivalent and shade over Priming Coat with Cement Primer Waterbase Interior Gr- 1 Asian/ Berger/ Nerolac/ Saicoat/Indocem or Equivalenton New Plastered Surfaceafter thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges but excluding GST etc, complete for finished item of work as per SS 911 FOR EXRTERNAL WALLS.
492.25
294
144883.94
... More
Painting to new walls with 2 coats of Plastic Emulsion Paint Asian/ Berger/ Nerolac/ Saicoat/Indocem or Equivalent and shade over Priming Coat with Cement Primer Waterbase Interior Gr- 1 Asian/ Berger/ Nerolac/ Saicoat/Indocem or Equivalenton New Plastered Surfaceafter thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges but excluding GST etc, complete for finished item of work as per SS 911 FOR INTERNAL WALLS.
612.62
216
132491.33
... More
Painting to new iron work with 2 coats of synthetic enamel paint of approved brand and shade over a prime coat with red oxide primer making three coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of dead mortar, including cost and conveyance of all materials to work site and all operational, incidental, labour charges including overhead charges & Contractors profit but excluding GST and seigorage charges etc. complete for finished item of work as per APSS No.1212
32.4
216
7024.97
... More
Supplying and fixing of Stainless Steel (grade 304) Hand Railing as per approved drawing with top rail of 50mm dia pipe, 2mm thick medium class, 4 Nos of 20mm dia pipes 1.6mm thick medium class as inner railing horizantal, and 3 nos. fixed with base plate of 75mm dia using bonding agent and anchor fastener and welding, drilling of 32mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thoroughly, lacquer finishing to present seeamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labnour charges, over heads and contractors profit etc., complete for finished item of work.
36
2280
82100.16
... More
Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including soverhead charges & Contractors profit but exlcuding GST and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
12.5
91714
1146432.13
... More
(No.of items 91 (Ninety one ) Only
-
-
33910186.41
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements