Panchayat Raj Engineering Department Tender

Ornamental Plastering with CM (1:3) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for Ceiling

Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for superstructure-Inside

Plastering with CM 2 coats, 12 mm thick, base coat in CM (1:4), 8mm thick and top coat in CM (1:2), 4mm thick with sponze finishing.Outside

Cost and supply of MS Grills including cost and conveyance to work spot and fabrication charges of steel like cutting rods, welding grills placing in position etc., complete.Windows

Flooring with high polished granite 16 to 18mm thick slabs other than black set over a base coat of CM (1:8) 20mm thick over already laid cement concrete bed including neat cement slurry at 3.30 kgs per sqm and jointing neately with white cement paste to full depth of slabs laid on already laid cement concrete bed set over base coat of CM (1:8) 12mm thick including neat cement slurry spread at 3.30 kgs per sqm and jointing to full depth of polished granite slabs including cost and conveyance of all materials and labour charges, filling joints neatly, dressing of floor stones etc., complete

Flooring with ceramic tiles, set over base coat of cement mortar (1:8) 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed neately with white cement paste to full depth including cost of all materials like cemnet, sand water and tiles etc. complete including seigniorage charges etc. complete for finished item of work but excluding the cost of conveyance of all materials

Flooring (Dadooing) with decorated white back ground glazed tiles set over base coat of cement mortar (1:6) 12mm thick over bed already laid or RCC roof slab icnlduing neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full dpeth, including cost of all materials like cement, sand water and tiles etc. complete including seigniraoge charges etc. complete for finished item of work but excluding the cost of conveyance of all materials in toilets

Painting to New walls with two coats of Plastic Emulsion paint of approved brand and shade after throughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials including cost and conveyance of all materials, cost of brushes, water to site etc., sales and other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges,curing etc. complete for finished item o work in all floors for walls (APSS No.911) in all floors for interior walls

Providing and applying wall putty of white cement or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/saicoat texture paint of average 1 to 3mm thickness over plastered surface to prepared the surface even and smooth after throughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean and wipe off loose dust, applyiong putty/texture paint filler by putty kinfe/muislin pad, air dry for 2-3 hours for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for internal walls excluding cost of access scaffolding for Ceiling and inside

Painting to New walls with Plastic Emulsion paint of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powedred materials, including cost and conveyance of all materials to work site and all operational, incidental labour charges etc. excluding VAT and seigniorage charges and including overhead charges complete for finished item of work as per SS 911 for internal walls (APSS No.912) for internal and external walls.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent for Windows

RCC M 20 grade nominal mix (cement: fine aggregate: Coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, layuing concrete, curing etc. complete but excluding cost of steel and its fabrication charges, seignairoage charges for finished item of work including centering, shuttering. for footings

RCC M 20 grade nominal mix (cement: fine aggregate: Coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, layuing concrete, curing etc. complete but excluding cost of steel and its fabrication charges, seignairoage charges for finished item of work including centering, shuttering. for columns

RCC M 20 grade nominal mix (cement: fine aggregate: Coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, layuing concrete, curing etc. complete but excluding cost of steel and its fabrication charges, seigniorage charges for finished item of work including centering, shuttering. for plinth beam

Providing high yield strength deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work

Supply and fixing of 25mm dia 1.8mm thick PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned TW box including all labour charges etc. complete

Supply and run of 1 of 22/0.3mm (1.5sqmm) FR/FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable in existing pipe for earth continuity including cost of all materials, all taxes conveyance to site and all labour charges for all operation etc. complete

Supply and run of 2 of 2.5 sqmm 36/0.3mm FR PVC insulated flexible copper cable in existing pipe for mains including cost of all materials, all taxes conveyance to site and all labour charges for all operationa etc. complete

Supplying and run of 4 of 56/0.3mm (4 sq.mm) VR PVC insulated flexible copper cable in existing pipe for generator mains including cost and conveyance of all materials all taxes, conveyance to site and all labour charges etc. complete

Wiring with 2 runs of 14/0.30mm (1.0 sqmm) fire retardant (FR) PVC insulated flexible copper cable (ISI MARK) in existing pipe with 6A Switch ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc. complete

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continutiy including wire leads, earth connections along with all labour charges etc. complete

Supply and fixing of 20A 3 pin and 6A 3 pin plug socket with and 16A switch control duly recessed in wall with MS switch deep box of 6"x8"x2 1/2" size covered with hylam sheet including earth connection and all labour charges etc. complete plug socket

Supply of mini modular Stepped type Electronic Regulator with Cover Frame for Ceiling fans 900/1200/1400mm sweep complete erected on existing board including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc. complete

Supply and fixing of 1200mm (48") sweep 230V, A.C. 50 Hz ceiling fan with 3 blades and doub le ball bearings with all standard acceossire including cost of all materials, all taxes conveyance to site and all labour charges for all operations etc. complete

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220-260 volts with PF0.9 surge portection 2KV, THD15% with inbuilt dirver and forested cover CCT:300K-5700K minimum CRI70 etc.

Supply and fixing of batten holder/slanting holder in lieu of ceiling rose of light point complete with all complete with all connections and all labour charges with 7W led bulb for new installation)

Supply and transportation of 45W LED street light luminaire made of rpessure diecast alluminium body with powder coated, having protective toughned glass, supply input voltage 120-270V AC, PF 0.90 high power LED having system efficacy 100/w and jucntion temprature 70 C with ingress protection 1

Supply and fixing SPN distribution board with IP-20 protection sitable for single phase earth leakage circut braker (ELCB)/Residual current circut brakers (RCCB)/Double pole (DP) isolator as incomer and 10KA SP MCBs as out going including internal connection and labour charges etc. complete

Providing independent earthling by excavating a trench to a depth of 2.1M in all soils, as per size specificed in the data, using 40mm dia B class GI pipe of 2.5 mtrs length with necessary acceosires with hume pipe ring duly providing staggered holes including cost of all materials and all taxes, covneyance to site and labour charges etc. complete

Supply of fresh air exhaust fan of light duty 250V A.C. 50Hz 225 mm (9")/300mm size (12") 1350 R.P.M. metallic body plastic blades, wire mesh etc. complete