Municipality Tender

Laying of CC Road;Construction of VCC M30 grade design mix un-reinforced, expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per IS codes , coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 21- days, and water finishing to lines and grade as per drawing and Technical Specification .(Note:-Payment will be released only after satisfactory core results of the concrete strength for 28 days as per IS code)

Laying of CC Road;Plain Cement Concrete (1:2.5:5) prop. Using 40mm graded Metal nominal size machine crushed hand broken granite metal including cost and conveyance of all meterials, seignorage, sales tax, royalties, and labour charges such as mixing concrete, laying tamping, curing all operational, incidental charges etc., complete as per S.S 402 for finished items of work. complete and as directed by the Engineer-in-Charge of the work but excluding Cost of Seiognirage , GST & NAC

Laying of CC Road;Construction of Granular sub-base by providing HBT(Trap) material confirming to Grading - V of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) etc., complete and as directed by the Engineer-in-Charge of the work. Excluding Seingorage Charges but excluding Cost of Seiognirage , GST & NAC