Municipality Tender

Drilling of bore and digging of PVC filter point and PVC Pipe and fixing and required materials with GI Pipe and fixing in position and testing including cost and conveyance of all labour charges (Excluding materials) etc. complete. Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.

Supply of 3 core, 4.0 Sq mm.ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: As per list of recommended brands as category I

Providing Plastering CM (1:4) 12mm thick including cost and conveyance of all materials, seignorage and labour charges for mixing mortor, watering, curing excluding CP & TP on seignorage charges etc., complete

Providing Painting with Synthetic Enamel paints - Single Coats - For New Iron Work. The rate cinluding cost and conveyance of all material, labour charges, etc., complete as per SS and as directed by the departmental officer in charge of the work.

Manufacturing supply and fixing of M.S.Grill Gate with M.S.Angulars, M.S.Flats including cost and conveyance of all material and labour charges for fabrication of steel work including cost of welding roads , power charges and fixing in position etc.,

Supply delivery and fixing of service lift

Supply& Fixing of CENTURYWELLS or equivalent Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours including necessary G.I. Scam bolts nuts, G.I. 'J' bolts, limpet washers and Bituem washers etc., complete.BLD-CSTN-8-1

Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per Idia Gypsum Ltd specification as per SS and as directed by the departmental officer in charge of the work.

Brick work in CM (1:6) mix using second class bricks for approved kilness including cost and conveyance of all materials labour charges and watering etc., complete.

Supply and Transportation of …1.00HP 15 Stage., 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft motor suitable for working on 240V ± 10%, single phase 50 Hz AC supply, etc complete for 4" Bore well. Makes: As per list of recommended brands as category I.MAT-03641