Municipality Tender

Supply of 3 Core…………ISI marked Flat Copper cable of ISI for Submersible Motors confirming to IS: 694:1990. Makes: As per list of recommended brands as category I ELEC-1.6.3 2.5 Sq mm

Supply and delivery of PN 1.6 Bar "Resilient seated soft sealing" Gate valves (Sluice valves) with body & bonnet of Ductile Iron GGG-40/ SG 400/15 or - 50SG-500/7 or equivalent as per I.S.1865, IS 3896-2 & wedge fully rubber lined with food grade quality grade W270 Grade EPDM, Replaceable Spindle and Nut without gland packing with 3-0 ring protection system on the shaft and seals of NBR. The valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS 5163 type A/IS 14846. All the valves should be with fusion bonded Electrostatic powder coating both inside and outside pocket (Min 250 microns) RAL 5005 with pocket less straight through body passage conforming to design standards of DIN 3202 F 4 BS 5163 Type A flange drilling as per IS:1538 including transportation complete. (Makes : AVK/VAG/DURGA/ IVC (or) approved make by department authorities and with Necessary Cap, Extension rods as per site requirements) 80mm Dia MAT-08068

100mm Dia MAT-08068

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete. 100mm Dia