Municipal Corporation Tender

Double Arch Swing Double Arch swing of 6.50m x 1.50m size four seated with 6m long 80NB GI Pipe bent in single piece and welded together with a flange 5mm their of IS 40x40x5mm to form a strong frame bottom and middle height of the frame in 2700mm; top pipe 50NB GI pipe 2950mm length; swing clamp assembly made up of two parts are joined together with M6 allen bolts along with ‘S’ hook to house a bearing for smooth and noiselen swing; rubber dip molded 6 mm dia 1450mm along swing chain; ‘S’ hook of 8mm dia 145 x 130mm triangular hook of SS 304 grade; seats made of LLDPE; self lubricated SKF/ NTN/ NACHI make bearings; pins and clips of 12mm dia – all framing pipes of ‘C’ class GI pipe of Tata / jindal make and powder coated multicolor optional painting of 50-70 micros and all materials shall confirming to IS codes.

Brick Masonry in CM (1:6) with Bricks traditional size 23x11x7 cms 2nd class including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete.

Painting Two Coats on New Concrete Surfaces to given an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701MORD.

Dismantling Brick work (Cement Mortar)

Triple Standing Twister *Dimensions: 1570 mm (L) X 1570 mm (W) X 1350 mm (H) Supply, Delivery and Commissioning of STANDING TRIPPLE TWISTER with prime pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Standing twister plate support pipe shall be minimum of 80mm NB dia of thickness not less than 4.5mm, Bottom frame support shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Handle ring shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The twister plate is hinged over 80NB standing pipe with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with "Kakinada Smart City" Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity.

Supply of Sand for filling including cost and conveyanceof all materials and labour charges for spreading, sectioning, levelling and watering etc., complete

Supply and fixing of 32mm dia G.M Non return valve ISI make

Supply and Transportation of 1.0HP 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete for 4" Bore well. Makes : As per list of recommended brands as category I.

Sky Walker Double *Dimensions: 1700 mm (L) X 830 mm (W) X 1650 mm (H). Supply, Delivery and Commissioning of SKY WALKER with main frame shall be minimum of 80mm NB dia of thickness not less than 4.50mm & Handle pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of "C" class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded with Plastic/Rubber grips at handle grip hold. The handle pipes are hinged over 80NB main frame with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Pins should be case hardened and centreless grinded finish for life long durability. The handle pipes shall be further extended to the 32mm NB dia on both sides. Paired rectangular tubes with four foot rests are linked to main frame. Foot rest shall be made of Aluminum material - LM26 grade. Total footrest structure is supported on base frame shall be made up of rectangular pipe of 48 X 48 X 2.9 mm and side frames shall be made up of 32mm NB dia GI Pipes. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick M.S. plate with "Kakinada Smart City" Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity.

Providing concrete for plain concrete (M15 Design Mix) using 275 Kgs Cement ,20 mm,10mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Painting with Synthetic Enamel Paints -Two coats -for New Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS

Drilling of Bore well with Hand Bore set to a finished dia of 165/175/180 mm justify both sides in all kinds of formations suitable for hand bore set drilling such as black cotton soils, sandy and alluvial soils and insertion of PVC/PVC blue casing pipe with couplings including slotting of pipe where ever required and fixing of bore well with cap and bail plug as per directions of the department for a finished item of work including conducting yield test, crew charges, cost of consumables, transportation charges and bore development charges and all other charges required in fixation of pipe assembly, Flushing of bore with equired pressure excluding cost of all required materials such as cap, bail plug, clamp sets, bolts and nuts etc., excluding all taxes , cost of PVC casing pipe, slotting charges.

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor up to 1.5 HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch. Makes: LT LK / BCH / Crompton/ Siemens(ELEC.5.4.15).

Providing concrete for plain concrete (M10) using 220 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Supply and fixing of MS clamp set (2 Nos) suitable for 32mm dia pipe with 8Nos nut & bolts

Air Walker Double *Dimensions: 2115 mm (L) X 390 mm (W) X 1420 mm (H) Supply, Delivery and Commissioning of DOUBLE AIR WALKER with three prime stand pipes shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Pedestal frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Handle frame shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of "C" class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The two pedestal frames are hinged over 100NB prime stand pipes with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Foot rest shall be made of Aluminum material - LM26 grade.All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with "Kakinada Smart City" Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity.

Cross Trainer *Dimensions:1200 mm (L) X 500 mm (W) X 1500 mm (H) Supply, Delivery and Commissioning of CROSS TRAINER with prime stand pipe shall be minimum of 80mm NB dia of thickness not less than 4.50mm, pedal link pipe shall be minimum of 40mm NB dia of thickness not less than 4.1mm, handle frame pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm and handle grips shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of "C" class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The pedal frame are hinged over 80NB prime stand pipe with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Foot rest shall be made of Aluminum material - LM26 grade. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with "Vijayawada Municipal Corporation" emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity.

Plastering for walls in CM (1:4) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete.

Net Rock climber : Mode of frame 50 NB ‘C’ class GI pipes CNC bend of Tata / Jindal make; Rope climber with 18mm OD nylon rope and hinged to main frame with 8mm U hook, Rock climber with high quality LLDPE material and aligned to Zigzag shaped protection to facilitate climbing act; with powder coated multi colored painting 60 to 70 microns; all the materials confirming to IS codes.

Manufacture, Supply and Delivery of Unplasicised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding Excise duty and Sales Tax etc. 160mm dia PVC pipe 6.00 g/cm^ (MAT-07655)

Orbital climber: Circular clumber mounted on 4 no.s vertical posts, central supports clumber on two faces made of ‘C’ class Tata / Jindal make GI pipes 80mm dia for vertical and 50 – 32 dia pipe for frames with 8 feet x 6 feet x 7 feet; powder coated multicolor paintings, all materials shall confirming to IS codes.

Manufacturing, Supply, Delivery and fixing of M.S. Iron Gate , MS Grill using with M.S. Angulars, M.S. flats including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., , complete.as directed by the departmental authorities.

Supply of ISI 20mm outer dia medium (2.1mm thickness) grade with IS:9537 part 3 regid PVC pipe. Makes: Sudhakar / Modi / VIP / GM as directed by the departmental authorities (MAT-02673)

S& F31.75mm dia GI bend Ist quality Including cost and conveyance of all materials etc., complete.

Thaichi Spinner 4 Wheel *Dimensions: 1230 mm (L) X 520 mm (W) X 1500 mm (H) Supply, Delivery and Commissioning of THAI CHI SPINNER 4 WHEEL with center pipe shall be of minimum 100mm NB dia of thickness not less than 5.00 mm, support frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & THAI CHI SPINNER rings shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of "C" class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded with Handle knobs are made from high quality nylon material. The rings are hinged over 32NB support frame with the help of specially heavy-duty bearings should be reputed SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8 mm. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with "Kakinada Smart City" Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity.

S & F 20mm Nominal bore GI pipe medium grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete.

Circular Swing: Length x Width x Height = 6ft x 3ft x 8ft. Combination equipment madeup of GI pipe of different NB. NB Stands for Nominal Boresize i.e., Internal diameter of pipe in millimeters. Bearings are reputed make and press fitted for smooth rotation. Welding: MIG weld copper wire 1.2 mm is used. Paint: Power Coat Para Coating Paints. Bush and Pin Rods are Heavy Quality of Galvanized iron. Steel Caps for side and top and bearnings covers for safety of water damage, heavy quality aluminium foot rest. All caps and steel and other bolts and nuts are GI heavy bolts and Nuts.

Providing Gravel spreading in layers not more than 150 mm thick, sectioning to required camber and gradient, watering and compacting each layer to protors density with OMC compaction using 80 to 100 KN capacity vibratory roller including cost and conveyance of all materials, water etc., to site, hire and operational charges of power roller and other T&P etc., complete duly maintaining the required camber and gradient in the formation as directed by Engineer-in charge .

Painting with Priming Coat to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS

TOTAL

Supply of Dust for filling including cost and conveyanceof all materials and labour charges for spreading, sectioning, levelling and watering etc., complete

Manufacture, supply & delivery of 16.0kg/sqcm 20mm HDPE pipes conforming to IS 4984 -2016 including transportation to any were in AP excluding all taxes ( Supply up to 90mm dia in coil & above 90mm dia straight length)

S& F 32 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete (BMW-F.85)

Supply and fixing of GM ball valves with as per IS 778, class-1 India make heavy type including cos, conveyance of all materials and labour harges etc., complete as per SS

Supply and fixing of premium CPVC pipes ad fittings to meet the requirement of ASTMD 2846 and are produced in CTS (copper tube 1/2" to 2" ashirvad flowguard SDR 11 and SDR 13.5 pipes are made from identical CPVC compoud having the same physical properties for hot and cold water( IS 15778:2007) 22.20mm OD pipe-SDR 13.5

Providing Solvent Cement / Gum 1000ml for the pipe joints and as directed by the departmental authorities.(BMW-G.149)

Cresent Slide : Main pipe made from 90 NB Mild Iron with heavy quality of pipes and standing flat form support pipes are made from 42 NB and 32 NB supports Mild Iron with heavy quality of pipes. Ladder steps and support pipes heavy Mild Iron, Crescent slide are made from heavy FRP of 6mm thickness.

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)

Supply of 3 Core 1.5 Sqmm Flat Copper cable of ISI for Submersible Motors of makes Finolex / GM / Million / V-Guard / Payal / Nakoda / Gold Medal / HPL / RP etc (MAT-02794)

Supply and fixing of 32mm x 25mm dia stainless steel Nipple.

Supply and delivery of 160mm dia PVC dummy including cost and conveyance of work site etc., complete as directed by the departmental authorities

Supply . Delivery, laying and jointing of high strength precast concrete blocks interlocking reflecting designer (Rubber Mould) 60mm for paving of M-40 grade and top 10mm thickness shall be for imported colour pigmentation with approved colours and white cement to get reflecting as per drawings and technical specifications as directed by departmental authorities

Hot Dipped Galvanised Iron chain link mesh 8 gauge (4.0m) as per IS 2721-1979-2"x 2" (50mm x 50m ) -8 Gauge